Finite-Difference Lattice Boltzmann Scheme for High-Speed Compressible Flow： Two-Dimensional Case

Lattice Boltzmann （LB） modeling of high-speed compressible flows has long been attempted by various authors. One common weakness of most of previous models is the instability problem when the Mach number of the flow is large. In this paper we present a finite-difference LB model, which works for flows with flexible ratios of specific heats and a wide range of Mach number, from 0 to 30 or higher. Besides the discrete-velocity-model by Watari [Physica A 382 （2007） 502], a modified Lax Wendroff finite difference scheme and an artificial viscosity are introduced. The combination of the finite-difference scheme and the adding of artificial viscosity must find a balance of numerical stability versus accuracy. The proposed model is validated by recovering results of some well-known benchmark tests： shock tubes and shock reflections. The new model may be used to track shock waves and/or to study the non-equilibrium procedure in the transition between the regular and Mach reflections of shock waves, etc.     

High-speed vertical-cavity surface-emitting laser (VCSEL) absorption spectroscopy of ammonia (NH<Subscript>3</Subscript>) near 1.54 μm

A single-frequency VCSEL has been used for the first time for high-resolution spectroscopy near 1.5 μm. The incorporated buried-tunnel-junction technology enabled the realization of a long-wavelength InGaAlAs/InP VCSEL with low threshold current (0.925 mA), high output powers (0.576 mW) and low series resistance (60 Ω). The high-speed tuning capability of the long-wavelength VCSEL was investigated and used to conduct high-speed absorption spectroscopy. The peak tuning speed was measured to be 3.4 cm^-1/μs and a 4.5-cm^-1-wide NH₃ spectrum was recorded in 2 μs. The VCSEL was used to measure highly resolved low-pressure spectra for pressures ranging from 9.6 mbar to 1 bar. The measured Doppler-broadened linewidth of 0.02 cm^-1 agrees within 3% with the theoretical calculations. The availability and various advantages of 1.3–2-μm single-frequency VCSELs as compared to edge-emitting diode lasers, such as a large current tuning range even at very high tuning frequencies, and low production costs, should significantly expand the application fields for near-infrared laser gas sensors. Received: 17 July 2002 / Revised version: 4 December 2002 / Published online: 12 May 2003 RID="*" ID="*"Corresponding author. Fax: +43-1/58801-15999, E-mail: Gerhard@Totschnig.com     

894nm高温垂直腔面发射激光器及其芯片级铯原子钟系统的应用

报道了自行研制的894 nm高温垂直腔面发射激光器(VCSEL)以及基于此类器件的芯片级铯原子钟系统的应用实验结果.根据芯片级铯原子钟对VCSEL在特定高温环境下产生894.6 nm线偏振激光的要求,对器件的量子阱增益及腔模位置等材料结构参数进行了优化,确定增益-腔模失谐量为-15 nm,使器件的基本性能在高温环境下保持稳定.研制的VCSEL器件指标为:20—90?C温度范围内阈值电流保持在0.20—0.23 m A,0.5 m A工作电流下输出功率0.1 mW;85.6?C温度环境下激光波长894.6 nm,偏振选择比59.8:1;采用所研制的VCSEL与铯原子作用,获得了芯片级铯原子钟实施激光频率稳频的吸收谱线和实施微波频率稳频的相干布居囚禁谱线.     

基于AlN膜钝化层VCSEL激光器热特性的研究

 用ANSYS有限元热分析软件模拟了基于AlN膜钝化层和SiO2膜钝化层的高功率垂直腔面发射半导体激光器(VCSEL)器件内部的热场分布和热矢量分布。经模拟得到基于AlN膜钝化层的VCSEL热阻为3.123℃/W,而基于SiO2膜钝化层的VCSEL的热阻为4.377℃/W。经实验测得基于AlN膜钝化层的VCSEL热阻为3.54℃/W,而基于SiO2膜钝化层的VCSEL的热阻为4.75℃/W,模拟结果与实验结果吻合较好。     

高速850 nm垂直腔面发射激光器的优化设计与外延生长

利用传输矩阵理论和TFCalc薄膜设计软件分析了分布布拉格反射镜和垂直腔面发射激光器(VCSEL)的反射率谱特性,对比了从谐振腔入射与从表面入射时反射率谱的差异,为白光反射谱表征VCSEL外延片提供了依据.利用Crosslight软件模拟了InGaAs/AlGaAs应变量子阱的增益谱随温度的变化特性及VCSEL器件内部温度分布,设计了增益-腔模调谐的VCSEL.采用金属有机物化学气相淀积设备外延生长了顶发射VCSEL,制作了氧化孔径为7.5μm的氧化限制型VCSEL器件,测试了器件的直流特性、光谱特性和眼图特性;6 mA,2.5 V偏置条件下输出光功率达5 mW,4级脉冲幅度调制传输速率达50 Gbit/s.     

Experimental demonstration of 3×3 10 Gb/s reconfigurable free space optical card-to-card interconnects

In this Letter, we propose and demonstrate the concept of a free space optics-based parallel high-speed reconfigurable card-to-card interconnect architecture employing microelectromechanical systems (MEMS)-based steering mirror arrays in conjunction with VCSEL and photodiode arrays. A bit-error rate of ～10(-6) and a receiver sensitivity below -11.5 dBm are experimentally attained with a proof-of-concept 3×3 10 Gb/s reconfigurable card-to-card optical interconnect demonstrator.     

Remarks on interpretations of the Eotvos experiment and misinterpretation of E=mc^2

The Eotvos experiment on the verification of equivalence between inertial mass and gravitational mass of a body is famous for its accuracy. A question is, however, can these experimental results be applied to the case of a physical space in general relativity, where the space coordinates could be arbitrary？ It is pointed out that it can be validly applied because it has been proven that Einstein＇s equivalence principle for a physical space must have a frame of reference with the Euclidean-like structure. Will claimed further that such an overall accuracy can be translated into an accuracy of the equivalence between inertial mass and each type of energy. It is shown that, according to general relativity, such a claim is incorrect. The root of this problem is due to an inadequate understanding of special relativity that produced the famous equation E=mc^2, which must be understood in terms of energy conservation. Concurrently, it is pointed out that this error is a problem in Will＇s book, ‘Theory and Experiment in Gravitational Physics＇.     

First-Principles Calculations of Atomic and Electronic Properties of T1 and In on Si（111）

The atomic and electronic structures of T1 and In on Si（111） surfaces are investigated using the firstprinciples total energy calculations. Total energy optimizations show that the energetically favored structure is 1/3 ML T1 adsorbed at the T4 sites on Si（111） surfaces. The adsorption energy difference of one T1 adatom between （√3 × √3） and （1 × 1） is less than that of each In adatom. The DOS indicates that TI 6p and Si 3p electrons play a very important role in the formation of the surface states. It is concluded that the bonding of TI adatoms on Si（111） surfaces is mainly polar covalent, which is weaker than that of In on Si（111）. So T1 atom is more easy to be migrated than In atom in the same external electric field and the structures of T1 on Si（111） is prone to switch between （√3 × √3） and （1 × 1）.     

Study on the pre-chopper in CSNS LEBT

Physical designing of the pre-chopper in CSNS LEBT is carried out, which includes the deflecting voltage, the length and the width of the deflecting plates, and the gap between the deflecting plates. The most outstanding feature of the design is that both the gap and the width vary with the beam envelope size. So both the requried deflecting voltage and the loaded capacitance are lowered. In order to avoid destruction of the space charge neutralization by the pre-chopper in the whole LEBT, an electron-trapping electrode is arranged to confine the electrostatic field of the pre-chopper to the local area. To examine the reliability of the pre-chopping design in CSNS LEBT, a similar pre-chopping design in ADS RFQ LEBT is set up and an experiment on the pre-chopper is prepared. 3-dimensional simulations are carried out to determine the loaded capacitance and the applied voltage of the electron-trapping electrode.     

Synchronization in a Mutualism Ecosystem Induced by Noise Correlation

Understanding the cause of the synchronization of population evolution is an important issue for ecological improvement. Here we present a Lotka-Volterra-type model driven by two correlated environmental noises and show, via theoretical analysis and direct simulation, that noise correlation can induce a synchronization of the mutualists. The time series of mutual species exhibit a chaotic-like fluctuation, which is independent of the noise correlation, however, the chaotic fluctuation of mutual species ratio decreases with the noise correlation. A quantitative parameter defined for characterizing chaotic fluctuation provides a good approach to measure when the complete synchronization happens.     

Metric of States

Metric of quantum states plays an important role in quantum information theory. In this letter, we find the deep connection between quantum logic theory and quantum information theory. Using the method of quantum logic, we can get a famous inequality in quantum information theory, and we answer a question raised by S. Gudder.     

Design and construction progress of BRIF

A new RIB project, the Beijing Radioactive Ion-beam Facility （BRIF）, has been running at CIAE since 2004. In this project, a 100 MeV H-cyclotron, CYCIAE-100, is selected as the driving accelerator providing a 75-100 MeV, 200-500 μA proton beam. An ISOL system employs two stage separators to reach the mass resolution of 20000. Its RIB beam will be injected into the existing Tandem and a superconducting booster installed down stream of the Tandem will increase the energy by 2 MeV/q. The progress of BRIF, giving special emphasis to CYCIAE-100, will be introduced in this paper.     

Status and accuracy of the Monte Carlo generators for luminosity measurements

The status and accuracy of the precision Monte Carlo generators used for luminosity measurements at flavour factories is reviewed. It is shown that, thanks to a considerable, long-term effort in tuned comparisons between the predictions of independent programs, as well as in the validation of the generators against the presently available calculations of the next-to-next-to-leading order QED corrections to Bhabha scattering, the theoretical accuracy reached by the most precise tools is of about one per mille. This error estimate is valid for realistic experimental cuts, appears to be quite robust and is already sufficient for very accurate luminosity measurements. However, recent progress and possible advances to further improve it are also discussed.     

Beam tail effect of a performance-enhanced EC-ITC RF gun

The beam tail effect of multi-bunches will influence the electron beam performance in a high intensity thermionic RF gun. Beam dynamic calculations that illustrate the working states of single beam tail and multi-pulse feed-in of a performance-enhanced EC-ITC （external cathode independent tunable cavity） RF gun for an FEL （free electron laser） injector are performed to estimate the extracted bunch properties. By using both Parmela and homemade MATLAB codes, the effects of a single beam tail as well as interactions of multi-pulses are analyzed, where a ring-based electron algorithm is adopted to calculated RF fields and the space-charge field. Furthermore, the procedure of unexpected deviated-energy particles mixed with an effective bunch head is described by the MATLAB code as well. As a result, the performance-enhanced EC-ITC RF gun is proved to have the capability to extract continual stable bunches suitable for a high requirement THz-FEL.     

D^0D^0 mixing and other recent charm results from BABAR

Studies in which BABAR data have shown evidence for mixing in the neutral charm meson system are presented. A new measurement of the lifetime difference parameter ycp = （1.16±0.22±0.18）% is described. Results are also presented from a systematic study of DK and D＊K invariant mass distributions from a 470 fb^-1 sample of asymmetric e^＋e^- interactions recorded by the BABAR detector at the PEP-Ⅱ storage rings. A new charmed-strange meson has been observed with mass [3044 ± 8stat （-5^＋30 ）syst] MeV/c^2 and width [239± 35stat （-42^＋46）syst]MeV/c^2.     

Entropy of Quantum Dynamical Systems and Sufficient Families in Orthomodular Lattices with Bayessian State

The purpose of the present paper is to study the entropy hs（Ф） of a quantum dynamical systems Ф = （ L, s, Ф）, where s is a bayessian state on an orthomodular lattice L. Having introduced the notion of entropy hs（ Ф, A） of partition A of a Boolean algebra B with respect to a state s and a state preserving homomorphism Ф, we prove a few results on that, define the entropy of a dynamical system hs（Ф）, and show its invariance. The concept of sufficient families is also given and we establish that hs （Ф） comes out to be equal to the supremum of hs （Ф,A）, where A varies over any sufficient family. The present theory has then been extended to the quantum dynamical system （ L, s, Ф）, which as an effect of the theory of commutators and Bell inequalities can equivalently be replaced by the dynamical system （B, s0, Ф）, where B is a Boolean algebra and so is a state on B.     

Pattern recognition and data mining software based on artificial neural networks applied to proton transfer in aqueous environments

In computational physics proton transfer phenomena could be viewed as pattern classification problems based on a set of input features allowing classification of the proton motion into two categories： transfer ＇occurred＇ and transfer ＇not occurred＇. The goal of this paper is to evaluate the use of artificial neural networks in the classification of proton transfer events, based on the feed-forward back propagation neural network, used as a classifier to distinguish between the two transfer cases. In this paper, we use a new developed data mining and pattern recognition tool for automating, controlling, and drawing charts of the output data of an Empirical Valence Bond existing code. The study analyzes the need for pattern recognition in aqueous proton transfer processes and how the learning approach in error back propagation （multilayer perceptron algorithms） could be satisfactorily employed in the present case. We present a tool for pattern recognition and validate the code including a real physical case study. The results of applying the artificial neural networks methodology to crowd patterns based upon selected physical properties （e.g., temperature, density） show the abilities of the network to learn proton transfer patterns corresponding to properties of the aqueous environments, which is in turn proved to be fully compatible with previous proton transfer studies.     

Coordinated Control of Multi-Agent Systems with a Varying-Velocity Leader and Input Saturation

In this paper, we investigate a leader-following tracking problem for multi-agent systems with bounded inputs. We propose a distributed bounded protocol for each follower to track a leader whose states may not be completely measured. We theoretically prove that each agent can follow the leader with estimable track errors. Finally, some numerical simulations are presented to illustrate our theoretical results.     

Calibration of RPC-based muon detector at BESⅢ

The calibration algorithm for RPC-based muon detector at BESIII has been developed. The calibration method, calibration error and algorithm performance are studied. The primary results of efficiency and noise at layer, module and strip levels have been calibrated with cosmic ray data. The calibration constants are available for simulation and reconstruction tuning. The results of Monte Carlo and data are also compared to check the validation and reliability of the algorithm.     

Effects of hydrogen bonds on solid state TATB,RDX,and DATB under high pressures

To probe the behavior of hydrogen bonds in solid energetic materials, we conduct ReaxFF and SCC-DFTB molecular dynamics simulations of crystalline TATB, RDX, and DATB. By comparing the intra- and inter-molecular hydrogen bond- ing rates, we find that the crystal structures are stabilized by inter-molecular hydrogen bond networks. Under high-pressure, the inter- and intra-molecular hydrogen bonds in solid TATB and DATB are nearly equivalent. The hydrogen bonds in solid TATB and DATB are much shorter than in solid RDX, which suggests strong hydrogen bond interactions existing in these energetic materials. Stretching of the C-H bond is observed in solid RDX, which may lead to further decomposition and even detonation.