离子液体均匀提取-高效液相色谱法测定参附注射液中4种单酯型乌头碱的含量

摘要 采用离子液体均匀提取-高效液相色谱法测定了参附注射液中苯甲酰乌头碱（BA）、苯甲酰新乌头碱（BM）、苯甲酰次乌头碱（BH）和苯甲酰脱氧乌头碱（BD）的含量,通过优化离子液体的用量,样品溶液的pH值,提取时间和盐浓度等参数,确定最佳提取条件为：pH为中性,盐浓度为5%,采用0.058g的[C6Mim][ BF4]和0.26g的 NH4PF6作为提取剂,提取1min,可有效地将目标物从5mL注射液中提取出来。在此实验条件下测得四种单酯型乌头碱的检测限分别为45.5（BM）,19.8(BA),26.3(BH)和12.2(BD)μg L-1,对参附注射液样品进行分析,加样回收率范围在93.74-107.91%,RSD值均小于4.34%。     

复方中药四逆汤中乌头碱类二萜生物碱的电喷雾串联质谱研究

利用电喷雾串联质谱方法不经柱分离而直接分析复方中药四逆汤中二萜生物碱的组成,乌头碱类二萜生物碱在质谱条件下形成质子化分子,一种生物碱对应一个分子离子峰.检测到了苯甲酰单酯型、双酯型和脂类生物碱等18种二萜生物碱,其中苯甲酰中乌头原碱等单酯型生物碱是四逆汤中的主要生物碱成分.     

RP-HPLC法测定黑顺片中6种酯型生物碱的含量

建立黑顺片中6种酯型生物碱含量的高效液相测定方法。采用岛津C18色谱柱(250 mm×4.6 mm,5μm),以乙腈–四氢呋喃(体积比为25∶15)为流动相A,以0.1 mol/L乙酸铵溶液(每1 000 m L加冰乙酸0.5 m L)为流动相B梯度洗脱,流量为1.0 ml/min,检测波长为235 nm,柱温为35℃。苯甲酰新乌头原碱、苯甲酰乌头原碱、苯甲酰次乌头原碱、新乌头碱、次乌头碱、乌头碱进样量分别在0.222~4.430,0.060~1.119,0.144~2.878,0.015~0.297,0.025~0.496,0.011~0.229μg范围内与色谱峰面积线性呈良好的线性关系,相关系数r均大于0.999 5,检出限分别为2.10,2.70,2.20,2.60,1.60,3.10 ng,样品在12 h内稳定。苯甲酰新乌头原碱、苯甲酰乌头原碱、苯甲酰次乌头原碱、新乌头碱、次乌头碱、乌头碱的加标回收率分别为98.7%~102.2%,98.6%~102.3%,99.0%~101.9%,102.0%~97.3%,102.1%~98.3%,95.7%~103.5%,测定结果的相对标准偏差分别为2.5%,2.5%,2.2%,2.3%,2.2%,1.7%(n=6)。该方法简便,测定结果准确、可靠,可为黑顺片的质量评价和质量控制提供参考。     

离心超滤质谱筛选川乌中与人血清白蛋白相互作用的乌头类生物碱

采用离心超滤质谱技术从川乌总生物碱提取物中筛选与人血清白蛋白相互作用的乌头类生物碱成分,并用LC-MSn技术对筛选出的活性成分进行了分离鉴定.结果表明,从川乌总生物碱中筛选并鉴定出9种与人血清白蛋白存在相互作用的乌头类生物碱:苯甲酰新乌头原碱、苯甲酰乌头原碱、10-OH-中乌头碱、中乌头碱、10-OH-乌头碱、乌头碱、次乌头碱、脱氧乌头碱和3,13-脱氧乌头碱.     

HPLC测定植物性农药——0.25%乌头总碱乳油中的乌头类生物碱

 选择十八烷基键合相柱 ,以甲醇 水 氯仿 三乙胺 (体积比为 6 8∶32∶2∶0 1)混合溶液为流动相 ,用高效液相法测定了一种植物性农药 0 2 5 %乌头总碱乳油中的乌头生物碱。实验结果表明中乌头碱、乌头碱及次乌头碱与其他杂质能够得到很好的分离。以安宫黄体酮作内标物 ,用峰面积比测定各生物碱含量 ,在其线性范围内分析结果准确 ,回收率高 (>92 % ) ,重现性好 (RSD <3 2 % ) 。     

超高效液相色谱-串联质谱法同时测定尿样中4种痕量的乌头类生物碱

建立了超高效液相色谱-串联质谱(UPLC-MS/MS)结合中空纤维微萃取(HF-LPME)同时检测尿样中痕量的乌头碱、次乌头碱、新乌头碱和滇乌头碱等4种生物碱的方法。采用HF-LPME对尿样进行提取、纯化和富集,富集倍数达102～301。同时采用电喷雾电离(ESI)、多反应监测(MRM)进行含量测定,显著提高了尿液中乌头类生物碱的检测灵敏度,4种乌头类生物碱的定量限达到0.01～0.1 ng/L,可大大延长中毒患者尿样中乌头类生物碱的检测时间窗。方法验证结果表明,尿液中乌头碱、新乌头碱和滇乌头碱在0.01～10 ng/L、次乌头碱在0.1～100 ng/L范围内线性关系良好,提取回收率为80.2%～109%,相对标准偏差小于4.6%。该方法适用于乌头类生物碱中毒案件的检测,为痕量乌头类生物碱分析提供了灵敏的分析方法。     

大孔树脂对麻黄细辛附子汤生物碱成分静态吸附及解吸附性能研究

采用高效液相色谱法(HPLC)测定麻黄细辛附子(MXF)汤复方水提液中盐酸麻黄碱、盐酸伪麻黄碱、苯甲酰新乌头原碱、苯甲酰乌头原碱、苯甲酰次乌头原碱含量,考察了4种大孔树脂(HPD–100,HPD–722,HPD–400,HPD–600型)对5种生物碱的静态吸附、解吸附性能,筛选出分离纯化麻黄细辛附子汤中生物碱的最佳树脂。结果显示,HPD–722型树脂对5种生物碱的吸附过程稳定且吸附量大,具有较高的解吸附率(87.26%),优于其它3种树脂。HPD–722型大孔树脂适用于富集麻黄细辛附子汤中的生物碱类化合物。     

基于UPLC/Q-TOF-MS分析附子半夏配伍相反的物质基础

利用超高效液相色谱-飞行时间质谱联用技术(UPLC/Q-TOF-MS)分析附子半夏药对配伍相反的物质基础,从化学成分层次阐释其配伍相反机制.基于UPLC/Q-TOF-MS建立附子半夏药对配伍后生物碱类成分的化学指纹图谱,通过主成分分析法和正交偏最小二乘判别法分析药对配伍在合煎过程中的生物碱类成分的含量变化,找出差异变化显著的化学成分.结果表明正离子模式时附子半夏药对合煎液中次乌头碱,中乌头碱,乌头碱,去氧乌头碱,10-OH-中乌头碱,10-OH-乌头碱等的含量明显增高,而中乌头原碱,去乙酸中乌头原碱,去乙酸次乌头原碱,苯甲酰乌头原碱,苯甲酰次乌头原碱,10-OH-苯甲酰中乌头原碱等含量降低.附子半夏药对配伍应用时双酯型二萜生物碱的含量明显增高,而单酯型二萜生物碱的含量明显降低,这可能是附子半夏药对配伍相反作用的物质基础.     

人血清白蛋白生物色谱柱的性能研究及应用于铁棒锤中活性成分的筛选

以大孔硅胶为基质,采用羰基咪唑法合成了人血清白蛋白(HSA)生物色谱填料。详细评价了该填料对药物的分离性能,温度和pH对药物保留的影响。结果表明,该种生物色谱填料的分离性能优良,可以在短时间内基线分离4种药物分子。用HSA色谱柱对铁棒锤中有效成分进行了分离,通过LC-MS分析结果显示,该色谱柱可以分离出其中4种活性成分(脱乙酰去氧乌头碱、苯甲酰脱氧乌头碱、乌头原碱、16-O-去甲基乌头次碱)。     

固相萃取-超高效液相色谱-串联质谱法检测保健食品中9种人参皂苷

建立了以固相萃取结合超高效液相色谱-串联质谱(UPLC-MS/MS)同时检测保健食品中9种原人参二醇型和原人参三醇型人参皂苷的方法。保健食品中人参皂苷经过提取后,通过Alumina-N/XAD-2 SPE柱净化,在Hypersil Gold C18色谱柱(100 mm×2.1 mm, 1.9 μm)上分离,利用乙酸铵溶液(含0.1%甲酸)和乙腈作为流动相进行梯度洗脱,采用负离子扫描,多反应监测模式测定,外标法定量。研究通过对不同填料的固相萃取小柱的考察,最终选择了Alumina-N/XAD-2复合填料,其能对保健食品复杂基质中的人参皂苷进行有效富集和净化;通过考察人参皂苷的电离裂解过程,确定人参皂苷一级质谱准分子离子和相应的碎片离子,并经过色谱条件的优化,使质谱条件下一级质谱准分子离子和相应的碎片离子均一致的3种原人参二醇型人参皂苷Rb2、Rb3、Rc同分异构体实现完全分离。结果表明,9种人参皂苷在0.005~0.5 μg/mL范围内具有很好的线性关系,相关系数均大于0.9950。方法的加标回收率为81.1%~114.2%,相对标准偏差为0.4%~8.0%。所建立的方法采用XAD-2大孔吸附树脂和中性氧化铝的复合固相萃取材料,保健食品经过简单提取可直接作为固相萃取的上样溶液进行人参皂苷的富集和净化,通过超高效液相色谱-串联质谱不仅缩短了分析时间,也能对复杂基质样品中含量相对较低的人参皂苷进行准确定性和定量。该方法通量高,简单快速,重复性好,适用于保健食品中9种人参皂苷的定性和定量分析。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.