Density functional theory-based prediction of some aqueous-phase chemistry of superheavy element 111. Roentgenium(I) is the "softest" metal ion

A previous approach (Hancock, R. D.; Bartolotti, L. J. Inorg. Chem. 2005, 44, 7175) using DFT calculations to predict log K1 (formation constant) values for complexes of NH3 in aqueous solution was used to examine the solution chemistry of Rg(I) (element 111), which is a congener of Cu(I), Ag(I), and Au(I) in Group 1B. Rg(I) has as its most stable presently known isotope a t(1/2) of 3.6 s, so that its solution chemistry is not easily accessible. LFER (Linear free energy relationships) were established between DeltaE(g) calculated by DFT for the formation of monoamine complexes from the aquo ions in the gas phase, and DeltaG(aq) for the formation of the corresponding complexes in aqueous solution. For M2+, M3+, and M4+ ions, the gas-phase reaction was [M(H2O)6]n+(g) + NH3(g) = [M(H2O)5NH3]n+(g) + H2O(g) (1), while for M+ ions, the reaction was [M(H2O)2]+(g) + NH3(g) = [M(H2O)NH3]+(g) + H2O(g) (2). A value for DeltaG(aq) and for DeltaE for the formation of M = Cu2+ in reaction 1, not obtained previously, was calculated by DFT and shown to correlate well with the LFER obtained previously for other M2+ ions, supporting the LFER approach used here. The simpler use of DeltaE values instead of DeltaG(aq) values calculated by DFT for formation of monoamine complexes in the gas phase leads to LFER as good as the DeltaG-based correlations. Values of DeltaE were calculated by DFT to construct LFER with M+ = H+, and the Group 1B metal ions Cu+, Ag+, Au+, and Rg+, and with L = NH3, H2S, and PH3 in reaction 3: [M(H2O)2]+(g) + L(g) = [M(H2O)L]+g) + H2O(g) (3). Correlations involving DeltaE calculated by DMol3 for H+, Cu+, Ag+, and Au+ could reliably be used to construct LFER and estimate unknown log K1 values for Rg(I) complexes of NH3, PH3, and H2S calculated using the ADF (Amsterdam Density Functional) code. Log K1 values for Rg(I) complexes are predicted that suggest the Rg(I) ion to be a very strong Lewis acid that is extremely "soft" in the Pearson hard and soft acids and bases sense.     

Dissociation of alkaliated alanine in the gas phase: the role of the metal cation

The dissociation of prototypical metal-cationized amino acid complexes, namely, alkaliated alanine ([Ala+M]+, M+ = Li+, Na+, K+), was studied by energy-resolved tandem mass spectrometry with an ion-trap mass analyzer and by density functional theory. Dissociation leads to formation of fragment ions arising from the loss of small neutrals, such as H2O, CO, NH3, (CO+NH3), and the formation of Na+/K+. The order of appearance threshold voltages for different dissociation pathways determined experimentally is consistent with the order of critical energies (energy barriers) obtained theoretically, and this provides the necessary confidence in both experimental and theoretical results. Although not explicitly involved in the reaction, the alkali metal cation plays novel and important roles in the dissociation of alkaliated alanine. The metal cation not only catalyzes the dissociation (via the formation of loosely bound ion-molecule complexes and by stabilizing the more polar intermediates and transition structures), but also affects the dissociation mechanisms, as the cation can alter the shape of the potential energy surfaces. This compression/expansion of the potential energy surface as a function of the alkali metal cation is discussed in detail, and how this affects the competitive loss of H2O versus CO/(CO+NH3) from [Ala+M]+ is illustrated. The present study provides new insights into the origin of the competition between various dissociation channels of alkaliated amino acid complexes.     

Effect of metal ions (Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) and water coordination on the structure of glycine and zwitterionic glycine

Interactions between metal ions and amino acids are common both in solution and in the gas phase. Here, the effect of metal ions and water on the structure of glycine is examined. The effect of metal ions (Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) and water on structures of Gly.Mn+(H2O)m and GlyZwitt.Mn+(H2O)m (m = 0, 2, 5) complexes have been determined theoretically by employing the hybrid B3LYP exchange-correlation functional and using extended basis sets. Selected calculations were carried out also by means of CBS-QB3 model chemistry. The interaction enthalpies, entropies, and Gibbs energies of eight complexes Gly.Mn+ (Mn+ = Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) were determined at the B3LYP density functional level of theory. The computed Gibbs energies DeltaG degrees are negative and span a rather broad energy interval (from -90 to -1100 kJ mol(-1)), meaning that the ions studied form strong complexes. The largest interaction Gibbs energy (-1076 kJ mol(-1)) was computed for the NiGly2+ complex. Calculations of the molecular structure and relative stability of the Gly.Mn+(H2O)m and GlyZwitt.Mn+(H2O)m (Mn+ = Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+; m = 0, 2, and 5) systems indicate that in the complexes with monovalent metal cations the most stable species are the NO coordinated metal cations in non-zwitterionic glycine. Divalent cations Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+ prefer coordination via the OO bifurcated bonds of the zwitterionic glycine. Stepwise addition of two and five water molecules leads to considerable changes in the relative stability of the hydrated species. Addition of two water molecules at the metal ion in both Gly.Mn+ and GlyZwitt.Mn+ complexes reduces the relative stability of metallic complexes of glycine. For Mn+ = Li+ or Na+, the addition of five water molecules does not change the relative order of stability. In the Gly.K+ complex, the solvation shell of water molecules around K+ ion has, because of the larger size of the potassium cation, a different structure with a reduced number of hydrogen-bonded contacts. This results in a net preference (by 10.3 kJ mol(-1)) of the GlyZwitt.K+H2O5 system. Addition of five water molecules to the glycine complexes containing divalent cations Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+ results in a net preference for non-zwitterionic glycine species. The computed relative Gibbs energies are quite high (-10 to -38 kJ mol(-1)), and the NO coordination is preferred in the Gly.Mn+(H2O)5 (Mn+ = Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) complexes over the OO coordination.     

磷酸二甲酯阴离子(DMP~-)与一价、二价金属离子 相互作用的理论研究

在B3LYP、HF和MP2水平上运用全电子从头算(AE)和相对论有效实势(RECP)及6-311+G**和LanL2DZ基组计算Ⅰa、Ⅰb、Ⅱa和Ⅱb族金属离子与磷酸二甲酯阴离子(DMP-)的相互作用。 RECP用于除Li+、Be2+外所有的金属离子。 对Na+、K+、Cu+、Mg2+、Ca2+、Zn2+用AE和RECP 2种方法处理。 结果表明:RECP能可靠地用于重金属离子络合物; 二价金属离子络合物(DMP-—M2+)比一价金属离子络合物 (DMP-—M+)稳定;二价金属离子(M2+)可能比一价金属离子(M+)更易使多核苷酸折叠。     

Acid-catalyzed oxidation of iodide ions by superoxo complexes of rhodium and chromium

Superoxometal complexes L(H(2)O)MOO(2+) (L = (H(2)O)(4), (NH(3))(4), or N(4)-macrocycle; M = Cr(III), Rh(III)) react with iodide ions according to the stoichiometry L(H(2)O)MOO(2+) + 3I(-) + 3H(+) --> L(H(2)O)MOH(2+) + 1.5I(2) + H(2)O. The rate law is -d[L(H(2)O)MOO(2+)]/dt = k [L(H(2)O)MOO(2+)][I(-)][H(+)], where k = 93.7 M(-2) s(-1) for Cr(aq)OO(2+), 402 for ([14]aneN(4))(H(2)O)CrOO(2+), and 888 for (NH(3))(4)(H(2)O)RhOO(2+) in acidic aqueous solutions at 25 degrees C and 0.50 M ionic strength. The Cr(aq)OO(2+)/I(-) reaction exhibits an inverse solvent kinetic isotope effect, k(H)()2(O)/k(D)2(O) = 0.5. In the proposed mechanism, the protonation of the superoxo complex precedes the reaction with iodide. The related Cr(aq)OOH(2+)/I(-) reaction has k(H)2(O)/k(D)2(O) = 0.6. The oxidation of (NH(3))(5)Rupy(2+) by Cr(aq)OO(2+) exhibits an [H(+)]-dependent pathway, rate = (7.0 x 10(4) + 1.78 x 10(5)[H(+)])[Ru(NH(3))(5)py(2+)][Cr(aq)OO(2+)]. Diiodine radical anions, I(2)(*)(-), reduce Cr(aq)OO(2+) with a rate constant k = 1.7 x 10(9) M(-1) s(-1).     

The ammine, thiosulfato, and mixed ammine/thiosulfato complexes of silver(I) and gold(I)

The M(I)-NH(3), M(I)-S(2)O(3)(2)(-), and M(I)-S(2)O(3)(2)(-)-NH(3) systems (M = Ag, Au) were studied at 25 degrees C and at I = 0.1 M (NaClO(4)) using a variety of analytical techniques. For the Ag(I)-NH(3)-S(2)O(3)(2)(-) system, AgS(2)O(3)NH(3)(-) was detected with formation constant log beta(111) (for the reaction Ag(+) + S(2)O(3)(2)(-) + NH(3) <--> AgS(2)O(3)NH(3)(-)) of 11.2, 10.4, and 10.8 on the basis of silver potentiometry, UV-vis spectrophotometry, and hydrodynamic voltammetry, respectively. Also, the values of log beta(101)(AgNH(3)(+)), log beta(102)(Ag(NH(3))(2)(+)), log beta(110)(AgS(2)O(3)(-)), and log beta(120)(Ag(S(2)O(3))(2)(3)(-)), obtained from silver potentiometry, were 3.59, 7.0, 8.97, 13.1, respectively. In the case of the ammine complexes, the log beta(101)(AgNH(3)(+)) and log beta(102)(Ag(NH(3))(2)(+)) values were found to be 3.5 and 7.1, respectively, from the UV-vis spectrophotometric experiments. The mixed species AuS(2)O(3)NH(3)(-) was detected in UV-vis spectrophotometric, hydrodynamic voltammetric, and potentiometric experiments with the stepwise formation constants (log K(111)) of -4.0, -3.5, -3.8, respectively, for the reaction Au(S(2)O(3))(2)(3)(-) + NH(3) <--> AuS(2)O(3)NH(3)(-) + S(2)O(3)(2)(-). At higher [NH(3)]/[S(2)O(3)(2)(-)] ratios (>10(5)), the formation of Au(NH(3))(2)(+) was also detected in spectrophotometric and potentiometric experiments with stepwise formation constants (log K(102)) of -5.4 and -5.3, respectively, according to the reaction AuS(2)O(3)NH(3)(-) + NH(3) <--> Au(NH(3))(2)(+) + S(2)O(3)(2)(-).     

Chelate effect and thermodynamics of metal complex formation in solution: a quantum chemical study

The accuracy of quantum chemical predictions of structures and thermodynamic data for metal complexes depends both on the quantum chemical methods and the chemical models used. A thermodynamic analogue of the Eigen-Wilkins mechanism for ligand substitution reactions (Model A) turns out to be sufficiently simple to catch the essential chemistry of complex formation reactions and allows quantum chemical calculations at the ab initio level of thermodynamic quantities both in gas phase and solution; the latter by using the conductor-like polarizable continuum (CPCM) model. Model A describes the complex formation as a two-step reaction: 1. [M(H2O)x](aq) + L(aq) <==>[M(H2O)x], L(aq); 2. [M(H2O)x], L(aq) <==>[M(H2O)(x-1)L],(H2O)(aq). The first step, the formation of an outer-sphere complex is described using the Fuoss equation and the second, the intramolecular exchange between an entering ligand from the second and water in the first coordination shell, using quantum chemical methods. The thermodynamic quantities for this model were compared to those for the reaction: [M(H2O)x](aq) + L(aq) <==>[M(H2O)(x-1)L](aq) + (H2O)(aq) (Model B), as calculated for each reactant and product separately. The models were tested using complex formation between Zn(2+) and ammonia, methylamine, and ethylenediamine, and complex formation and chelate ring closure reactions in binary and ternary UO(2)(2+)-oxalate systems. The results show that the Gibbs energy of reaction for Model A are not strongly dependent on the number of water ligands and the structure of the second coordination sphere; it provides a much more precise estimate of the thermodynamics of complex formation reactions in solution than that obtained from Model B. The agreement between the experimental and calculated data for the formation of Zn(NH(3))(2+)(aq) and Zn(NH(3))(2)(2+)(aq) is better than 8 kJ/mol for the former, as compared to 30 kJ/mol or larger, for the latter. The Gibbs energy of reaction obtained for the UO(2)(2+) oxalate systems using model B differs between 80 and 130 kJ/mol from the experimental results, whereas the agreement with Model A is better. The errors in the quantum chemical estimates of the entropy and enthalpy of reaction are somewhat larger than those for the Gibbs energy, but still in fair agreement with experiments; adding water molecules in the second coordination sphere improves the agreement significantly. Reasons for the different performance of the two models are discussed. The quantum chemical data were used to discuss the microscopic basis of experimental enthalpy and entropy data, to determine the enthalpy and entropy contributions in chelate ring closure reactions and to discuss the origin of the so-called "chelate effect". Contrary to many earlier suggestions, this is not even in the gas phase, a result of changes in translation entropy contributions. There is no simple explanation of the high stability of chelate complexes; it is a result of both enthalpy and entropy contributions that vary from one system to the other.     

Study on adsorption behavior of cesium using ammonium tungstophosphate (AWP)-calcium alginate microcapsules

A functional microcapsule was prepared by encapsulating the fine crystalline ammonium tungstophosphate(AWP) in calcium alginate polymer(CaALG).The characterization of AWP-CaALG microcapsule was examined by SEM and EPMA.The adsorption behavior of Cs(I),Rb(I),Sr(II),Pd(II),Ru(III),Rh(III),La(III),Ce(III),Dy(III) and Zr(IV) was investigated by the batch method.The batch experiments were carried out by varying the shaking times,HNO 3 concentration,and initial concentration of metal ions.Relatively large K d values above 10 5 cm 3 /g for Cs(I) were obtained in the range of 0.1-5 M HNO 3,resulting in a separation factor of Cs/Rb exceeding 10 2.In contrast,the K d values of Sr(II),Pd(II),Ru(III),La(III),Dy(III),Ce(III) and Zr(IV) were considerably lower than 50 cm 3 /g.The K d value of Cs(I) decreased in the order of the coexisting ions,H + > Na + >> NH 4 +,and a linear relationship with a slop of about 1 was obtained between log K d and log [NH 4 + ]([NH 4 + ] > 0.01 M).The adsorption of Cs(I) was found to be controlled by chemisorption mechanism,and followed a Langmuir-type adsorption equation.A high uptake percentage of 99.4% for Cs(I) was obtained by using the dissolved solutions of spent fuel from FBR-JOYO(JAEA).     

OFF-OFF-ON switching of fluorescence and electron transfer depending on stepwise complex formation of a host ligand with guest metal ions

Stepwise complex formation is observed between 2,3,5,6-tetrakis(2-pyridyl)pyrazine (TPPZ) and a series of metal ions (M(n+) = Sc3+, Y3+, Ho3+, Eu3+, Lu3+, Nd3+, Zn2+, Mg2+, Ca2+, Ba2+, Sr2+, Li+), where TPPZ forms a 2:1 complex [(TPPZ)2-M(n+)] and a 1:1 complex [TPPZ-M(n+)] with Mn+ at low and high concentrations of metal ions, respectively. The fluorescence intensity of TPPZ begins to increase at high concentrations of metal ions, when the 2:1 (TPPZ)2-M(n+) complex is converted to the fluorescent 1:1 TPPZ-M(n+) complex. This is regarded as an "OFF-OFF-ON" fluorescence sensor for metal ions depending on the stepwise complex formation between TPPZ and metal ions. The fluorescence quantum yields of the TPPZ-M(n+) complex vary depending on the metal valence state, in which the fluorescence quantum yields of the divalent metal complexes (TPPZ-M2+) are much larger than those of the trivalent metal complexes (TPPZ-M3+). On the other hand, the binding constants of (TPPZ)2-M(n+) (K1) and TPPZ-M(n+) (K2) vary depending on the Lewis acidity of metal ions (i.e., both K1 and K2 values increase with increasing Lewis acidity of metal ions). Sc3+, which acts as the strongest Lewis acid, forms the (TPPZ)2-Sc3+ and TPPZ-Sc3+ complexes stoichiometrically with TPPZ. In such a case, "OFF-OFF-ON" switching of electron transfer from cobalt(II) tetraphenylporphyrin (CoTPP) to O2 is observed in the presence of Sc3+ and TPPZ depending on the ratio of Sc3+ to TPPZ. Electron transfer from CoTPP to O2 occurs at Sc3+ concentrations above the 1:2 ratio ([Sc3+]/[TPPZ]0 > 0.5), when the (TPPZ)2-Sc3+ complex is converted to the TPPZ-Sc3+ complex and TPPZ-(Sc3+)2, which act as promoters of electron transfer (ON) by the strong binding of O2*- with Sc3+. In sharp contrast, no electron transfer occurs without metal ion (OFF) or in the presence at Sc3+ concentrations below the 1:2 ratio (OFF), when the (TPPZ)2-Sc3+ complex has no binding site available for O2*-.     

Formation of ternary complexes by coordination of (diethylenetriamine)-platinum(II) to N1 or N7 of the adenine moiety of the antiviral nucleotide analogue 9

The synthesis of (Dien)Pt(PMEA-N1), where Dien = diethylenetriamine and PMEA2- = dianion of 9-[2-(phosphonomethoxy)ethyl]adenine, is described. The acidity constants of the threefold protonated H3[(Dien)Pt(PMEA-N1)]3+ complex were determined and in part estimated (UV spectrophotometry and potentiometric pH titration): The release of the proton from the (N7)H+ site in H4[(Dien)Pt(PMEA-N1)]3+ occurs with a rather low pKa (= 0.52+/-0.10). The release of the proton from the -P(O)2(OH) group (pKa = 6.69+/-0.03) in H[(Dien)Pt(PMEA-N1)]+ is only slightly affected by the N1-coordinated (Dien)Pt2+ unit. Comparison with the acidic properties of the H[(Dien)Pt(PMEA-N7)]+ species provides evidence that in the (Dien)Pt(PMEA-N7) complex in aqueous solution an intramolecular, outer-sphere macrochelate is formed through hydrogen bonds between the -PO3(2-) residue of PMEA2- and a PtII-coordinated (Dien)NH2 group; its formation degree amounts to about 40%. The stability constants of the M[(Dien)Pt(PMEA-N1)]2+ complexes with M2+ = Mg2+, Ca2+, Ni2+, Cu2+ and Zn2+ were measured by potentiometric pH titrations in aqueous solution at 25 degrees C and I = 0.1 M (NaNO3). Application of previously determined straight-line plots of log K(M(R-PO3))M versus pK(H(R-PO3)H for simple phosph(on)ate ligands. R-PO3(2-), where R represents a non-inhibiting residue without an affinity for metal ions, proves that the primary binding site of (Dien)Pt(PMEA-N1) is the phosphonate group with all metal ions studied; in fact, Mg2+, Ca2+ and Ni2+ coordinate (within the error limits) only to this site. For the Cu[(Dien)Pt(PMEA-N1)]2+ and Zn[(Dien)Pt(PMEA-N1)]2- systems also the formation of five-membered chelates involving the ether oxygen of the -CH2-O-CH2-PO3(2-) residue could be detected; the formation degrees are about 60% and 30%, respectively. The metal-ion-binding properties of the isomeric (Dien)Pt(PMEA-N7) species studied previously differ in so far that the resulting M[(Dien)Pt(PMEA-N7)]2+ complexes are somewhat less stable, but again Cu2+ and Zn2+ also form with this ligand comparable amounts of the mentioned five-membered chelates. In contrast, both M[(Dien)Pt(PMEA-N1/N7)]2+ complexes differ from the parent M(PMEA) complexes considerably; in the latter instance the formation of the five-membered chelates is of significance for all divalent metal ions studied. The observation that divalent metal-ion binding to the phosphonate group of (Dien)Pt(PMEA-N1) and (Dien)Pt(PMEA-N7) is only moderately inhibited (about 0.2-0.4 log units) by the twofold positively charged (Dien)Pt2+ unit at the adenine residue allows the general conclusion, considering that PMEA is a nucleotide analogue, that this is also true for nucleotides and that consequently participation of, for example, two metal ions in an enzymatic process involving nucleotides is not seriously hampered by charge repulsion.     

Prediction of formation constants of metal-ammonia complexes in aqueous solution using density functional theory calculations

Density functional theory calculation of gas-phase Delta G of replacement of a water molecule by NH(3) on [M(H(2)O)(6)](n+)(g) for 19 different metal ions correlates well with Delta G of formation of mono NH(3) complexes of these ions in water, suggesting this approach will permit prediction of formation constants in aqueous solution, and produce insights into theories of metal complex formation reactions.     

Complexation of metal ions, including alkali-earth and lanthanide(III) ions, in aqueous solution by the ligand 2,2',6',2'-terpyridyl

Some metal-ion-complexing properties of the ligand 2,2',6',2'-terpyridyl (terpy) in aqueous solution are determined by following the π-π* transitions of 2 × 10(-5) M terpy by UV-visible spectroscopy. It is found that terpy forms precipitates when present as the neutral ligand above pH ～5, in the presence of electrolytes such as NaClO(4) or NaCl added to control the ionic strength, as evidenced by large light-scattering peaks. The protonation constants of terpy are thus determined at the ionic strength (μ) = 0 to avoid precipitation and found to be 4.32(3) and 3.27(3). The log K(1) values were determined for terpy with alkali-earth metal ions Mg(II), Ca(II), Sr(II), and Ba(II) and Ln(III) (Ln = lanthanide) ions La(III), Gd(III), and Lu(III) by titration of 2 × 10(-5) M free terpy at pH >5.0 with solutions of the metal ion. Log K(1)(terpy) was determined for Zn(II), Cd(II), and Pb(II) by following the competition between the metal ions and protons as a function of the pH. Complex formation for all of these metal ions was accompanied by marked sharpening of the broad π-π* transitions of free terpy, which was attributed to complex formation affecting ligand vibrations, which in the free ligand are coupled to the π-π* transitions and thus broaden them. It is shown that log K(1)(terpy) for a wide variety of metal ions correlates well with log K(1)(NH(3)) values for the metal ions. The latter include both experimental log K(1)(NH(3)) values and log K(1)(NH(3)) values predicted previously by density functional theory calculation. The structure of [Ni(terpy)(2)][Ni(CN)(4)]·CH(3)CH(2)OH·H(2)O (1) is reported as follows: triclinic, P1, a = 8.644(3) ?, b = 9.840(3) ?, c = 20.162(6) ?, α = 97.355(5)°, β = 97.100(5)°, γ = 98.606(5)°, V = 1663.8(9) ?(3), Z = 4, and final R = 0.0319. The two Ni-N bonds to the central N donors of the terpy ligands in 1 average 1.990(2) ?, while the four peripheral Ni-N bonds average 2.107(10) ?. This difference in the M-N bond length for terpy complexes is typical of the complexes of smaller metal ions, while for larger metal ions, the difference is reversed. The significance of the metal-ion size dependence of the selectivity of polypyridyl ligands, and the greater rigidity of ligands based on aromatic groups such as pyridyl groups, is discussed.     

Magnetic properties of cyano-bridged Ln3+-M3+ complexes. Part I: trinuclear complexes (Ln3+ = La, Ce, Pr, Nd, Sm; M3+ = FeLS, Co) with bpy as blocking ligand

The reaction of Ln(NO3)3(aq) with K3[Fe(CN)6] or K3[Co(CN)6] and 2,2'-bipyridine in water/ethanol led to eight trinuclear complexes: trans-[M(CN)4(mu-CN)2{Ln(H2O)4(bpy)2}2][M(CN)6].8H2O (M = Fe3+ or Co3+, Ln = La3+, Ce3+, Pr3+, Nd3+, and Sm3+). The structures for the eight complexes [La2Fe] (1), [Ce2Fe] (2), [Pr2Fe] (3), [Nd2Fe] (4), [Ce2Co] (5), [Pr2Co] (6), [Nd2Co] (7), and [Sm2Co] (8) have been solved; they crystallize in the triclinic space group P and are isomorphous. They exhibit a supramolecular 3D architecture through hydrogen bonding and pi-pi stacking interactions. A stereochemical study of the nine-vertex polyhedra of the lanthanide ions, based on continuous shape measures, is presented. No significant magnetic interaction was found between the lanthanide(III) and the iron(III) ions.     

In situ attenuated total reflection infrared (ATR-IR) study of the adsorption of NO2-, NH2OH, and NH4+ on Pd/Al2O3 and Pt/Al2O3

In relation to the heterogeneous hydrogenation of nitrite, adsorption of NO2-, NH4+, and NH2OH from the aqueous phase was examined on Pt/Al2O3, Pd/Al2O3, and Al2O3. None of the investigated inorganic nitrogen compounds adsorb on alumina at conditions presented in this study. NO2-(aq) and NH4+(aq) on the other hand show similar adsorption characteristics on both Pd/Al2O3 and Pt/Al2O3. The vibrational spectrum of the NO2- ion changed substantially upon adsorption, clearly indicating that NO2- chemisorbs onto the supported metal catalysts. On the contrary, adsorption of NH4+ does not lead to significant change in the vibrational spectrum of the ion, indicating that the NH4+ ion does not chemisorb on the noble metal but is stabilized via an electrostatic interaction. When comparing the adsorption of hydroxylamine (NH2OH(aq)) on Pd/Al2O3 and Pt/Al2O3, significant differences were observed. On Pd/Al2O3, hydroxylamine is converted into a stable NH2(ads) fragment, whereas on Pt/Al2O3 hydroxylamine is converted into NO, possibly via HNO(ads) as an intermediate.     

Vibrational behavior of the phosphates ions in dittmarite-type compounds M'M'PO4.H2O (M'=K+, NH4+; M'=Mn2+, Co2+, Ni2+)

The IR and Raman spectra of the isostructural M'M'PO4.H2O compounds (M'=K+, NH4+; M'=Mn2+, Co2+, Ni2+) are reported and discussed with respect to the normal vibrations of the PO(4)3- ions. The vibrational behavior of PO4(3-) is in agreement with its low site symmetry Cs in the lattices-the symmetric nu1 and nu2 modes are activated in the IR spectra and the degeneration of the asymmetric nu3 and nu4 modes is lifted. A relatively large unit-cell group splitting is observed for nu1 in both the IR and Raman spectra and for nu3 in Raman spectra. It has been established that the mean wavenumbers of the P-O stretches (nuPO) are not affected by the M2+ ions present, but they are lower for the NH4-series than for the K-one (predominant influence of both the smaller repulsion potential and the hydrogen bonds in the NH4-lattices over the influence of the M+-O interactions). The extent of the energetic distortion of the PO(4)3- ions has been estimated based on the spectroscopic data for the site group splitting of the asymmetric modes (Deltanu3 and Deltanu4), the separation between the highest and the lowest wavenumbered P-O stretches (Deltanumax) and the intensity of nu1 in the IR spectra. The data provide an evidence that the PO4(3-) ions in KM'PO4.H2O are more distorted regarding the P-O bond lengths than those in NH4M'PO4.H2O, but their angular distortion is the same in both series. The trends for the energetic distortion of the phosphate ions found from the spectroscopic data correspond to the data for their geometric distortion deduced from the values of the distortion indices DI(PO) and DI(OPO).     

过渡元素杂多钨硅酸盐氧化还原性质的研究

本文通过极谱和循环伏安法,结合紫外光谱和X射线光电子能谱,研究了过渡元素钨硅杂多酸盐Kn[SiM(H2O)W11O39](M=Mn^2^+,Fe^3^+,Co^2^+,Ni^2^+,Zn^2^+,Cd^2^+)在溶液中的氧化还原性质,提出了它们的还原机理.杂多阴离子的极谱半波还原电位E1/2的顺序为Ni^2^+>Co^2^+>Zn^2^+>Fe^2^+>Mn^2^+,发现杂多阴离子的E1/2与其组分中的过渡元素的电负性X和过渡金属离子与水合电子反应速率常数的对数logke-分别有线性关系,讨论了过渡元素对杂多阴离子氧化还原性的影响.     

Metal ion-binding properties of (1H-benzimidazol-2-yl-methyl)phosphonate (Bimp2-) in aqueous solution. Isomeric equilibria, extent of chelation, and a new quantification method for the chelate effect

The acidity constants of the 2-fold protonated (1H-benzimidazol-2-yl-methyl)phosphonate, H2(Bimp)(+/-), are given, and the stability constants of the M(H;Bimp)+ and M(Bimp) complexes with the metal ions M2+ = Mg2+, Ca2+, Ba2+, Mn2+, Co2+, Cu2+, Zn2+, or Cd2+ have been determined by potentiometric pH titrations in aqueous solution at I = 0.1 M (NaNO3) and 25 degrees C. Application of previously determined straight-line plots of log KM(M(Bi-R)) versus pKH(H(Bi-R)) for benzimidazole-type ligands, Bi-R, where R represents a residue which does not affect metal ion binding, proves that the primary binding site in the M(H;Bimp)+ complexes is (mostly) N3 and that the proton is located at the phosphonate group; outersphere interactions seem to be important, and the degree of chelate formation is above 60% for all metal ion complexes studied, except for Zn(H;Bimp)+. A similar evaluation based on log KM(M(R-PO3)) versus pKH(H(R-PO3)) straight-line plots for simple phosph(on)ate ligands, R-, where R represents a residue which cannot participate in the coordination process, reveals that the primary binding site in the M(Bimp) complexes is (mostly) the phosphonate group with all metal ions studied. In this case, the formation degree of the chelates varies more widely in dependence on the kind of metal ion involved, i.e., from 17 +/- 11% to nearly 100% for Ba(Bimp) and Cu(Bimp), respectively. For all the M(H;Bimp)+ and M(Bimp) systems, the intramolecular equilibria between the isomeric complexes are evaluated in a quantitative manner. The fact that for Bimp2- the metal ion affinity of the two binding sites, N3 and PO3(2-), can be calculated independently, i.e., the corresponding micro stability constants become known, allows us to present for the first time a method for the quantification of the chelate effect solely based on comparisons of stability constants which carry the same dimensions. This effect is often ill defined in textbooks because equilibrium constants of different dimensions are compared, which is avoided in the present case. For the M(Bimp) complexes, it is shown that the chelate effect is close to zero for Ba(Bimp) whereas for Cu(Bimp) it amounts to about four log units. This method is also applicable to other chelating systems. Finally, considering that benzimidazole as well as phosphonate derivatives are employed as therapeutic agents, the potential biological properties of Bimp, especially regarding nucleic acid polymerases, are briefly discussed.     

Acid-base and metal-ion-binding properties of xanthosine 5'-monophosphate (XMP) in aqueous solution: complex stabilities, isomeric equilibria, and extent of macrochelation

The four acidity constants of threefold protonated xanthosine 5'-monophosphate, H3(XMP)+, reveal that at the physiological pH of 7.5 (XMP-H)(3-) strongly dominates (and not XMP(2-) as given in textbooks); this is in contrast to the related inosine (IMP(2-)) and guanosine 5'-monophosphate (GMP(2-)) and it means that XMP should better be named as xanthosinate 5'-monophosphate. In addition, evidence is provided for a tautomeric (XMP-HN1)(3-)/(XMP-HN3)(3-) equilibrium. The stability constants of the M(H;XMP)+ species were estimated and those of the M(XMP) and M(XMP-H)- complexes (M2+=Mg2+, Ca2+, Sr2+, Ba2+, Mn2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+) measured potentiometrically in aqueous solution. The primary M2+ binding site in M(XMP) is (mostly) N7 of the monodeprotonated xanthine residue, the proton being at the phosphate group. The corresponding macrochelates involving P(O)2(OH)- (most likely outer-sphere) are formed to approximately 65% for nearly all M2+. In M(XMP-H)- the primary M2+ binding site is (mostly) the phosphate group; here the formation degree of the N7 macrochelates varies widely from close to zero for the alkaline earth ions, to approximately 50% for Mn2+, and approximately 90% or more for Co2+, Ni2+, Cu2+, Zn2+, and Cd2+. Because for (XMP-H)(3-) the micro stability constants quantifying the M2+ affinity of the xanthosinate and PO3(2-) residues are known, one may apply a recently developed quantification method for the chelate effect to the corresponding macrochelates; this chelate effect is close to zero for the alkaline earth ions and it amounts to about one log unit for Co2+, Ni2+, Cu2+. This method also allows calculation of the formation degrees of the monodentatally coordinated isomers; this information is of relevance for biological systems because it demonstrates how metal ions can switch from one site to another through macrochelate formation. These insights are meaningful for metal-ion-dependent reactions of XMP in metabolic pathways; previous mechanistic proposals based on XMP(2-) need revision.     

A joint experimental and theoretical study of cation-pi interactions: multiple-decker sandwich complexes of ferrocene with alkali metal ions (Li+, Na+, K+, Rb+, Cs+)

A systematic study of cation-pi interactions between alkali metal ions and the cyclopentadienyl ring of ferrocene is presented. The alkali metal (Li+, Na+, K+, Rb+, Cs+) salts of the ditopic mono(pyrazol-1-yl)borate ligand [1,1'-fc(BMe2pz)2]2- crystallize from dimethoxyethane as multiple-decker sandwich complexes with the M+ ions bound to the pi faces of the ferrocene cyclopentadienyl rings in an eta5 manner (fc = (C5H4)2Fe; pz = pyrazolyl). X-ray crystallography of the lithium complex reveals discrete trimetallic entities with each lithium ion being coordinated by only one cyclopentadienyl ring. The sodium salt forms polyanionic zigzag chains where each Na+ ion bridges the cyclopentadienyl rings of two ferrocene moieties. Linear columns [-CpR-Fe-CpR-M+-CpR-Fe-CpR-M+-](infinity) (R = [-BMe2pz]-) are established by the K+, Rb+, and Cs+ derivatives in the solid state. According to DFT calculations, the binding enthalpies of M+-eta5(ferrocene) model complexes are about 20% higher as compared to the corresponding M+-eta6(benzene) aggregates when M+ = Li+ or Na+. For K+ and Rb+, the degree of cation-pi interaction with both aromatics is about the same. The binding sequence along the M+-eta5(ferrocene) series follows a classical electrostatic trend with the smaller ions being more tightly bound.     

New structural features of unsupported chains of metal ions in luminescent [(NH3)4Pt][Au(CN)2]2 x 1.5(H2O) and related salts

Luminescent [(NH(3))(4)Pt][Au(CN)(2)](2).1.5(H(2)O), which forms from aqueous solutions of [(NH(3))(4)Pt]Cl(2) and K[Au(CN)(2)], crystallizes with extended chains of the two ions with multiple close Pt...Au (3.2804(4) and 3.2794(4) A) and Au...Au (3.2902(5), 3.3312(5), and 3.1902(4) A) contacts. Nonluminescent [(NH(3))(4)Pt][Ag(CN)(2)](2).1.4(H(2)O) is isostructural with [(NH(3))(4)Pt][Au(CN)(2)](2).1.5(H(2)O). Treatment of [(NH(3))(6)Ni]Cl(2) with K[Au(CN)(2)] forms [(NH(3))(2)Ni][Au(CN)(2)](2) in which the [Au(CN)(2)](-) ions function as nitrile ligands toward nickel, which assumes a six-coordinate structure with trans NH(3) ligands. The [Au(CN)(2)](-) ions self-associate into linear columns with close Au...Au contacts of 3.0830(5) A, and pairs of gold ions in these chains make additional but longer (3.4246(5) A) contacts with other gold ions.