Solubilization of n-alkylbenzenes in aggregates of sodium dodecyl sulfate and a cationic polymer of high charge density (II)

The solubilization property of the aggregate composed of sodium dodecyl sulfate (SDS) and a cationic polymer (polydiallyldimethylammonium chloride, PDADMAC) was investigated. From the binding isotherm, the increasing free SDS concentration (Cf) above the critical aggregation concentration (cac) was clearly confirmed and used to calculate the Gibbs free energy change of solubilization. The maximum additive concentration of the alkylbenzene solubilizates remained almost constant around their aqueous solubilities below the cac and then increased with increasing SDS concentration above the cac and with decreasing alkyl chain length of the solubilizates. Also, their solubility increased with increasing temperature over the concentration range of the surfactant examined. Because the monomeric DS- concentration in the aqueous phase (Cf) increased with the SDS concentration above the cac in the SDS/PDADMAC system, Cf was evaluated from the binding isotherm to calculate the change in the Gibbs energies of transfer of the solubilizates using the phase separation model. The Gibbs energy change for the solubilizates decreased with increasing temperature and increasing alkyl chain length. The decrease in the Gibbs energy per CH2 group (DeltaGCH2 degrees) was favored by an increase of temperature, and it was larger in magnitude than that for micelles of single-surfactant systems. From the values of DeltaH degrees and TDeltaS degrees, the solubilization of alkylbenzenes into SDS/PDADMAC was found to be entropy-driven.     

Interactions of quaternary ammonium salt-type gemini surfactants with sodium poly(styrene sulfonate)

The interactions of cationic gemini surfactants, 1,2-bis(alkyldimethylammonio)ethane dibromide (m-2-m: m is hydrocarbon chain length, m = 10 and 12), and an anionic polymer, sodium poly(styrene sulfonate) (PSS), have been characterized by several techniques such as tensiometry, fluorescence spectroscopy, and dynamic light scattering. The surface tension of gemini surfactant/PSS mixed systems decreases with surfactant concentration, reaching break points, which are taken as critical aggregation concentrations (cac). The surface tension at the cac of mixtures is higher than that of single surfactants, and it is found that at concentrations above the cac, the surfactant molecules are associated with the polymer in the bulk. The 12-2-12/PSS mixed system shows higher surface activity than both 10-2-10/PSS and the monomeric surfactant of dodecyltrimethylammonium bromide/PSS systems. Fluorescence measurements of these mixed systems suggest the formation of a complex with a highly hydrophobic environment in the bulk of the solution. Additionally, dynamic light scattering measurements show that the hydrodynamic diameter of the 12-2-12/PSS mixed system is smaller than that of PSS only at low concentration, indicating interactions between surfactant and polymer. These result from the electrostatic attraction between ammonium and sulfate headgroups as well as the hydrophobic interaction between their hydrocarbon chains.     

Aggregation properties of diacyl lysine surfactant compounds: hydrophobic chain length and counterion effect

In this paper, we report on the study of aqueous solution and aggregation properties of diacyl Lysine surfactant salts with several surfactant counterions at a fixed hydrophobic chain length. They present a critical micellar concentration nearly independent of the counterion. The area per surfactant molecule is around 1.3 nm (2) also independent of the counterion. We have also studied the dry state crystallization of these surfactant salts. We show that small counterion systems tend to form bicontinuous cubic structures and that the increase in counterion size tends to form lamellar structures. We have compared this behavior with the dry state crystallization of the diacyl Lysine surfactants as a function of hydrophobic chain length. For long hydrophobic chains, the crystal structure is lamellar, while for intermediate, length is cubic. Among the structures studied, the one with the shortest chain length crystallizes in a hexagonal inverse phase.     

Interactions in Aqueous Mixtures of Alkylammonium Chlorides and Sodium Cholate

The interactions of alkylammonium chlorides (the number of carbon atom per chain was either 12, 14, or 16) with sodium cholate have been investigated by a combination of techniques including light and electron microscopy, surface tension, conductivity, light scattering, and microelectrophoretic measurements. The phase behavior has strongly depended on the molar ratio and actual concentration of oppositely charged surfactants. The change in the composition of the aggregates leads to a shape transformation from globular to elongated micelles to open and/or closed bilayers (vesicles) and precipitation. The length of micelles has been found to decrease dramatically with the concentration shift to the micellar regions of either surfactant. Upon a moderate excess of one surfactant, the mean hydrodynamic diameter of aggregates increases and wormlike micelles and/or open and closed bilayers are formed. Microscopic observations of alkylammonium cholates (novel catanionic surfactants precipitated in and/or close to equimolar region) have shown the presence of a variety of morphologies including twisted ribbons, tubules and bundles of tubules.     

Electrochemical tailoring of lamellar-structured ZnO films by interfacial surfactant templating

Zinc oxide films with ordered lamellar structures can be electrochemically produced by interfacial surfactant templating. This method utilizes amphiphile assemblies at the solid-liquid interface (i.e., the surface of a working electrode) as a template to electrodeposit inorganic nanostructures. To gain the ability to precisely tailor inorganic lamellar structures, the effect of various chemical and electrochemical parameters on the repeat distances, homogeneity, orientation, and quality of the interfacial amphiphilic bilayers were investigated. Surfactants with anionic headgroups (e.g., 1-hexadecanesulfonate sodium salt, dodecylbenzenesulfonate sodium salt, dioctyl sulfosuccinate sodium salt, mono-dodecyl phosphate, and sodium dodecyl sulfate) are critical because they incorporate Zn(2+) ions into their bilayer assemblies as counterions and guide the lamellar growth of ZnO films. Unlike surfactant structures in solution, the interfacial surfactant assemblies are insensitive to the surfactant concentration in solution. The use of organic cosolvents (e.g., ethylene glycol, dimethyl sulfoxide) can increase the homogeneity of bilayer assemblies when multiple repeat distances are possible in a pure aqueous medium. In addition, organic cosolvents can make the interfacial structure responsive to the change in bulk surfactant concentrations. The presence of quaternary alkylammonium salts (e.g., cetyltrimethylammonium bromide) as cationic cosurfactants improves the ordering of anionic bilayers significantly. Consequently, it also affects the orientation of lamellar structures relative to the substrate as well as the surface texture of the films. The quality of lamellar structures incorporated in ZnO films is also dependent on the deposition potentials that determine deposition rates. A higher degree of ordering is achieved when a slower deposition rate (I < 0.15 mA/cm(2)) is used. The results described here will provide a useful foundation to design and optimize synthetic conditions for the electrochemical construction of broader types of inorganic nanostructures.     

Effect of polymer molecular weight on the polymer/surfactant interaction

A thermodynamic analysis of the interaction between fourteen different molar mass poly(ethylene oxide)s (PEO) and sodium dodecyl sulfate (SDS) based on the measured surfactant-binding isotherms is given. The surfactant-binding isotherms were determined by the potentiometric method in the presence of 0.1 M inert electrolyte (NaBr). It was found that there is no PEO/SDS complex formation if M(PEO) < 1000. In the molecular weight range 1000 < M(PEO) < 8000, the critical aggregation concentration (cac) and the surfactant aggregation number are decreasing as the polymer molecular weight increases. The saturated bound surfactant amount is proportional to the number concentration of the polymer in this molecular weight range. If M(PEO) exceeds approximately 8000, the cac does not depend on the polymer molar mass, and the saturated bound amount of the surfactant becomes proportional to the mass concentration of the polymer. It was also observed that independently of the polymer molecular weight the surfactant aggregation number increases as the equilibrium surfactant monomer concentration increases from the cac to the critical micellar concentration (cmc). Finally, it was demonstrated that only one polymer molecule is involved in the complex formation independently of the polymer molecular weight.     

Surfactant polymer interactions between strongly interacting cationic surfactants and anionic polyelectrolytes from conductivity and turbidity measurements

The interactions between oppositely charged surfactant/polymer mixtures have been studied using conductivity and turbidity measurements. The dependence of aggregation phenomenon on the chain length and head group modifications of conventional cationic surfactants, i.e., hexadecyl- (HTAB), tetradecyl- (TTAB), and dodecyltrimethylammonium bromides (DTAB) and dimeric cationic surfactants, i.e., decyl- (DeDGB) and dodecyldimethylgemini bromides (DDGB), is investigated. It was observed that cationic surfactants induce cooperative binding with anionic polyelectrolytes at critical aggregation concentration (cac). The cac values are considerably lower than the critical micelle concentration (cmc) values for the same surfactant. After the complete complexation, free micelles are formed at the apparent critical micelle concentration (acmc), which is slightly higher in aqueous polyelectrolyte than in pure water. Among the conventional and dimeric cationic surfactants, DTAB and DeDGB, respectively, have been found to have least interactions with oppositely charged polyelectrolytes.     

Interactions between cationic starch and anionic surfactants

The surface tensions and the phase equilibria of dilute aqueous cationic starch (CS)/surfactant systems were investigated. The degree of substitution of the CS varied from 0.014 to 0.772. The surfactants investigated were sodium dodecyl sulphate (SDS), potassium octanoate (KOct), potassium dodecanoate (KDod) and sodium oleate (NaOl). The concentrations of CS were 0.001, 0.01 and 0.1 w%.Critical association concentrations (cac) occur at surfactant concentrations well below the critical micelle concentrations of the surfactants, except for KOct, KDod and NaOl at the lowest CS concentrations investigated (0.001 w%). The surface tensions of CS/surfactant solutions decrease strongly already below the cac. This is attributed to the formation of surface active associates by ion condensation. Associative phase separation of gels formed by CS and surfactant takes place at extremely low concentrations when the surfactant/polymer charge ratio is somewhat larger than 1. The gel is higly viscous and contains 40–60% water, depending on the concentration of electrolyte, the surfactant hydrocarbon chain length and the nature of the polar head of the surfactant.The concentration at which the phase separation occurs decreases with increasing surfactant chain length and the concentration of simple electrolyte, factors that promote micelle formation. This indicates that the gels are formed by association of CS to surfactant micelles. When surfactant well in excess of charge equivalence is added, the gels dissolve because the CS/surfactant complexes acquire a high charge.     

Molecular mechanism and thermodynamics study of plasmid DNA and cationic surfactants interactions

The molecular mechanism and thermodynamics of the interactions between plasmid DNA and cationic surfactants were investigated by isothermal titration calorimetry (ITC), dynamic light scattering, surface tension measurements, and UV spectroscopy. The cationic surfactants studied include benzyldimethyldodecylammonium chloride, benzyldimethyltetradecylammonium chloride, cetylpyridinium chloride, and cetyltrimethylammonium chloride. The results indicate a critical aggregation concentration (cac) of a surfactant: above the cac the surfactant forms aggregates with plasmid DNA; below the cac, however, there is no detectable interaction between DNA and surfactant. Surfactants with longer hydrocarbon chains have smaller cac, indicating that hydrophobic interaction plays a key role in DNA-surfactant complexation. Moreover, an increase in ionic strength (I) increases the cac but decreases the critical micellization concentration (cmc). These opposite effects lead to a critical ionic strength (I(c)) at which cac = cmc; when I < I(c), cac < cmc; when I > I(c), DNA does not form complexes with surfactant micelles. In the interaction DNA exhibits a pseudophase property as the cac is a constant over a wide range of DNA concentrations. ITC data showed that the reaction is solely driven by entropy because both deltaH(o) (approximately 2-6 kJ mol(-1)) and deltaS(o) (approximately 70-110 J K(-1) mol(-1)) have positive values. In the complex, the molar ratio of DNA phosphate to surfactant is in the range of 0.63-1.05. The reaction forms sub-micrometer-sized primary particles; those aggregate at high surfactant concentrations. Taken together, the results led to an inference that there is no interaction between surfactant monomers and DNA molecules and demonstrated that DNA-cationic surfactant interactions are mediated by the hydrophobic interactions of surfactant molecules and counterion binding of DNA phosphates to the cationic surfactant aggregates.     

Effect of sodium dodecyl sulfate at different hydration conditions on dioleoyl phosphatidylcholine bilayers studied by grazing incidence X-ray diffraction

The effect of the surfactant content and hydration conditions in the phases of dioleoyl phosphatidylcoline (DOPC)/sodium dodecyl sulfate (SDS) mixtures was studied. To this end, surface X-ray diffraction experiments have been performed on bilayers of the mixtures deposited on hydrophobic silicon wafers by dip coating. To investigate the effect of relative humidity (RH) on bilayer organization, a humidity chamber with dry-wet air control was used, and RH values were fixed between 1 and 65%. Our results showed, in addition to the lamellar phase, a rhombohedral phase in mixtures at low hydration conditions (RH < 30%). The d spacing between lamellae increased with the RH and SDS content. This fact could be associated with a swelling effect that is probably due to the localization of water molecules between the polar headgroups of the DOPC and SDS forming the bilayers. The electron-density profiles calculated by Fourier reconstruction of the lamellar stacking for the different samples also confirmed this fact. In addition, the increase in d spacing could be related to the increase in the hydrophilic character of the mixture when the SDS content increases. The rhombohedral phase was more clearly observed in mixtures with high SDS content. Thus, the stalk structure of the rhombohedral phase could be facilitated because of the SDS contribution to inverse structures.     

Phase behavior of polyglycerol didodecanoates in water

A phase diagram of a water-polyglyceryl didodecanoate ((C11)2Gn) system was constructed as a function of polyglycerol chain length (n) at 25 degrees C. The average number of dodecanoic acid residues attached to polyglycerol is in the range of 1.6-2.3, and unlike commercial long-chain polyglycerol surfactants, unreacted polyglycerols were removed in the surfactants used. With an increase in the polyglycerol chain, the surfactant changes from lipophilic to hydrophilic, and the type of self-organized structure also changes from lamellar liquid crystals to the aqueous micellar solution phase via hexagonal liquid crystals. However, a discontinuous micellar cubic phase does not appear in the phase diagram, while it is formed in a long poly(oxyethylene)-chain nonionic surfactant system. In a dilute region, a cloud point is observed at a moderate polyglycerol chain length, n approximate to 7. The cloud temperature is dramatically increased with a slight increase in hydrophilic chain because the dehydration of the hydrophilic chain length at high temperature is low compared with that of the poly(oxyethylene) chain. In other words, the phase behavior of (C11)2Gn is not very temperature sensitive. Three-phase microemulsion is formed in a water/(C11)2.3G7.3/m-xylene system. The three-phase temperature or HLB temperature is highly dependent on the polyglycerol chain length.     

Polymeric sulfated surfactants with varied hydrocarbon tail: I. Synthesis, characterization, and application in micellar electrokinetic chromatography

The influence of surfactant hydrocarbon tail on the solute/pseudostationary phase interactions was examined. Four anionic sulfated surfactants with 8-, 9-, 10-, and 11-carbon chains having a polymerizable double bond at the end of the hydrocarbon chain were synthesized and characterized before and after polymerization. The critical micelle concentration (CMC), polarity, and aggregation number of the four sodium alkenyl sulfate (SAIS) surfactants were determined using fluorescence spectroscopy. The partial specific volume of the polymeric SAIS (poly-SAIS) surfactants was estimated by density measurements and capillary electrophoresis (CE) was employed for determination of methylene selectivity as well as for elution window. The CMC of the monomers of SAIS surfactants decrease with increase in chain length and correlated well when fluorescence method was compared to CE. The physicochemical properties (partial specific volume, methylene selectivity, electrophoretic mobility, and elution window) increased with an increase in chain length. However, no direct relationship was found between the aggregation number and the length of hydrophobic tail of poly-SAIS surfactants. These polymeric surfactants were then used as pseudostationary phases in micellar electrokinetic chromatography (MEKC) to study the retention behavior and selectivity factor of 36 benzene derivatives with different chemical characteristics. Although variation in chain length of the polymeric surfactants significantly affects the retention of nonhydrogen bonding (NHB) benzene derivatives, these effects were less pronounced for hydrogen bond acceptor (HBA) and hydrogen bond donor (HBD) benzene derivatives. Therefore, hydrophobicity of poly-SAIS surfactants was found to be a major driving force for retention of NHB derivatives. However, for several benzene derivatives (NHB, HBA, and HBD) significantly higher selectivity factor was observed with longest chain polymeric surfactant (e.g., poly(sodium 10-undecenyl sulfate), poly-SUS) compared to shorter chain polymeric surfactant (e.g., poly(sodium 7-octenyl sulfate), poly-SOcS). In addition, the effect of the surfactant hydrophobic chain was also found to have some impact on migration order of NHB, HBA, and HBD benzene derivatives.     

直链醇链长对层状液晶结构与稳定性的影响

作为助表面活性剂,直链醇在层状溶致液晶的制备中是非常重要的。本文以层状液晶的相行为和小角度X射线衍射测量,研究了直链醇链长对层状液晶结构与稳定的影响。     

Formation of organo-highly charged mica

The interlayer space of the highly charged synthetic Na-Mica-4 can be modified by ion-exchange reactions involving the exchange of inorganic Na(+) cations by surfactant molecules, which results in the formation of an organophilic interlayer space. The swelling and structural properties of this highly charged mica upon intercalation with n-alkylammonium (RNH(3))(+) cations with varying alkyl chain lengths (R = C12, C14, C16, and C18) have been reported. The stability, fine structure, and evolution of gaseous species from alkylammonium Mica-4 are investigated in detail by conventional thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), in situ X-ray diffraction (XRD), and solid-state nuclear magnetic resonance (MAS NMR) techniques. The results clearly show the total adsorption of n-alkylammonium cations in the interlayer space which expands as needed to accommodate intercalated surfactants. The surfactant packing is quite ordered at room temperature, mainly involving a paraffin-type bilayer with an all-trans conformation, in agreement with the high density of the organic compounds in the interlayer space. At temperatures above 160 °C, the surfactant molecules undergo a transformation that leads to a liquid-like conformation, which results in a more disordered phase and expansion of the interlayer space.     

Interaction between DNA and cationic surfactants: effect of DNA conformation and surfactant headgroup

The interactions between DNA and a number of different cationic surfactants, differing in headgroup polarity, were investigated by electric conductivity measurements and fluorescence microscopy. It was observed that, the critical association concentration (cac), characterizing the onset of surfactant binding to DNA, does not vary significantly with the architecture of the headgroup. However, comparing with the critical micelle concentration (cmc) in the absence of DNA, it can be inferred that the micelles of a surfactant with a simple quaternary ammonium headgroup are much more stabilized by the presence of DNA than those of surfactants with hydroxylated head-groups. In line with previous studies of polymer-surfactant association, the cac does not vary significantly with either the DNA concentration or its chain length. On the other hand, a novel observation is that the cac is much lower when DNA is denaturated and in the single-stranded conformation, than for the double-helix DNA. This is contrary to expectation for a simple electrostatically driven association. Thus previous studies of polyelectrolyte-surfactant systems have shown that the cac decreases strongly with increasing linear charge density of the polyion. Since double-stranded DNA (dsDNA) has twice as large linear charge density as single-stranded DNA (ssDNA), the stronger binding in the latter case indicates an important role of nonelectrostatic effects. Both a higher flexibility of ssDNA and a higher hydrophobicity due to the exposed bases are found to play a role, with the hydrophobic interaction argued to be more important. The significance of hydrophobic DNA-surfactant interaction is in line with other observations. The significance of nonelectrostatic effects is also indicated in significant differences in cac between different surfactants for ssDNA but not for dsDNA. For lower concentrations of DNA, the conductivity measurements presented an "anomalous" feature, i.e., a second inflection point for surfactant concentrations below the cac; this feature was not displayed at higher concentrations of DNA. The effect is attributed to the presence of a mixture of ss- and dsDNA molecules. Thus the stability of dsDNA is dependent on a certain ion atmosphere; at lower ion concentrations the electrostatic repulsions between the DNA strands become too strong compared to the attractive interactions, and there is a dissociation into the individual strands. Fluorescence microscopy studies, performed at much lower DNA concentrations, demonstrated a transformation of dsDNA from an extended "coil" state to a compact "globule" condition, with a broad concentration region of coexistence of coils and globules. The onset of DNA compaction coincides roughly with the cac values obtained from conductivity measurements. This is in line with the observed independence of cac on the DNA concentration, together with the assumption that the onset of binding corresponds to an initiation of DNA compaction. No major changes in either the onset of compaction or complete compaction were observed as the surfactant headgroup was made more polar.     

The microstructure of di-alkyl chain cationic/nonionic surfactant mixtures: observation of coexisting lamellar and micellar phases and depletion induced phase separation

The evolution of the microstructure and composition occurring in the aqueous solutions of di-alkyl chain cationic/nonionic surfactant mixtures has been studied in detail using small angle neutron scattering, SANS. For all the systems studied we observe an evolution from a predominantly lamellar phase, for solutions rich in di-alkyl chain cationic surfactant, to mixed cationic/nonionic micelles, for solutions rich in the nonionic surfactant. At intermediate solution compositions there is a region of coexistence of lamellar and micellar phases, where the relative amounts change with solution composition. A number of different di-alkyl chain cationic surfactants, DHDAB, 2HT, DHTAC, DHTA methyl sulfate, and DISDA methyl sulfate, and nonionic surfactants, C12E12 and C12E23, are investigated. For these systems the differences in phase behavior is discussed, and for the mixture DHDAB/C12E12 a direct comparison with theoretical predictions of phase behavior is made. It is shown that the phase separation that can occur in these mixed systems is induced by a depletion force arising from the micellar component, and that the size and volume fraction of the micelles are critical factors.     

Interplay between the surface adsorption and solution-phase behavior in dialkyl chain cationic-nonionic surfactant mixtures

Neutron reflectivity, NR, and surface tension have been used to study the adsorption at the air-solution interface of mixtures of the dialkyl chain cationic surfactant dihexadecyl dimethyl ammonium bromide (DHDAB) and the nonionic surfactants monododecyl triethylene glycol (C12E3), monododecyl hexaethylene glycol (C12E6), and monododecyl dodecaethylene glycol (C12E12). The adsorption behavior of the surfactant mixtures with solution composition shows a marked departure from ideal mixing that is not consistent with current theories of nonideal mixing. For all three binary surfactant mixtures there is a critical composition below which the surface is totally dominated by the cationic surfactant. The onset of nonionic surfactant adsorption (expressed as a mole fraction of the nonionic surfactant) increases in composition as the ethylene oxide chain length of the nonionic cosurfactant increases from E3 to E12. Furthermore, the variation in the adsorption is strongly correlated with the variation in the phase behavior of the solution that is in equilibrium with the surface. The adsorbed amounts of DHDAB and the nonionic cosurfactants have been used to estimate the monomer concentration that is in equilibrium with the surface and are shown to be in reasonable qualitative agreement with the variation in the mixed critical aggregation concentration (cac).     

Salt effect on the complex formation between cationic gemini surfactant and anionic polyelectrolyte in aqueous solution

Salt effect on the interaction of anionic polyelectrolyte sodium carboxymethylcellulose (NaCMC) with cationic gemini surfactant hexamethylene-1,6-bis(dodecyldimethylammonium bromide) [C12H25(CH3)2N(CH2)6N(CH3)2C12H25]Br2 (C12C6C12Br2) has been investigated using turbidimetric titration, steady-state fluorescence, and mobility measurement. It is found that the critical aggregation concentration(cac) for C12C6C12Br2/NaCMC complexes depends little on addition of sodium bromide (NaBr). However, in the presence of nonionic surfactant Triton X-100 (TX100), the critical ionic surfactant mole fraction for the onset of complex formation (Yc) increases markedly with increasing NaBr concentration. These salt effects are supposed as the overall result from competition between the increase of interaction and the screening of interaction. The increase of interaction is referred to as the effect that the larger micelle with higher surface charge density induced by salt has a stronger interaction with oppositely charged polyelectrolyte. The screening of interaction is referred to as the salt screening of electrostatic attraction between the polymer chain and the surfactant. For complex formation between C12C6C12Br2 and NaCMC, the increase of interaction probably compensates the screening of interaction, leading to constant cac values at different salt concentrations. For complex formation between the C12C6C12Br2/TX100 mixed micelle and NaCMC, the screening of interaction probably plays a dominant role, leading to higher suppression of electrostatic binding of micelles to polyelectrolyte.     

Influence of a surfactant and electrolytes on adsorbed polymer layers

Solvent relaxation NMR and small-angle neutron scattering have been used to characterize adsorbed poly(ethylene oxide) (PEO) layers on silica at a range of surfactant and electrolyte concentrations. Below the critical aggregation concentration (cac), the results suggest that sodium dodecyl sulfate (SDS) interacts relatively weakly, perhaps analogously to a simple salt reducing the solvency of PEO. This is evidenced by a decrease in the adsorbed layer thickness combined with an increase in the bound fraction, although the total adsorbed amount is not greatly affected. The layer thickness goes through a minimum at the cac, after which further SDS addition results in the formation of PEO/SDS aggregates that repel each other and, hence, tend to desorb. The adsorbed amount therefore decreases, from 0.7 mg m(-2) initially to 0.2 mg m(-2) with 32 mM SDS. The aggregates that remain adsorbed also repel, and hence, there is an increase in the layer thickness and the persistence length, while the bound fraction is reduced. In comparison, the effects of electrolyte at the ionic strength studied are relatively minimal. There is, however, evidence that the repulsions between adsorbed PEO/SDS aggregates are partially screened, allowing them to approach each other more readily. This leads to a contraction of the adsorbed layer when the SDS concentration is sufficiently high.     

A systematic study of bovine serum albumin (BSA) and sodium dodecyl sulfate (SDS) interactions by surface tension and small angle X-ray scattering

Classical parameters obtained from surface tension technique coupled to small angle X-ray scattering (SAXS) measurements gave support to investigate conformational changes in the bovine serum albumin (BSA)-sodium dodecyl sulfate (SDS) complexes, as well as the size of the micelle-like clusters distributed along the polypeptide chain. The studied systems were composed of 1 wt% of BSA in the absence and presence of increasing SDS molar concentration up to 80 mM, under experimental conditions of low ionic strength and pH 5.40. At SDS concentrations below the critical aggregation concentration (cac) of 2.2 mM, SAXS results indicate that the detergent does not modify the native protein conformation. However, the beginning of protein unfolding, evidenced by SAXS through an increase in the values of radius of gyration Rg and protein maximum dimension Dmax, is coincident with the onset of SDS cooperative binding to BSA identified by the first breakpoint in the surface tension-SDS profile. Further SDS addition leads to the formation of micelle-like aggregates randomly distributed along the unfolded polypeptide chain, consistent to a necklace and bead model. The SAXS data also demonstrate that the SDS micelles grow in size up to 50 mM detergent. At 50 mM surfactant, the micelles stop growing. This concentration is near the BSA saturation binding by SDS measured by dialyzes and indicated by the second breakpoint in surface tension-SDS profile. The SAXS and surface tension data are also consistent with the formation of free micelles in equilibrium with BSA-SDS complexes for surfactant amount above the saturation.