千周和兆周范围的马氏体相变内耗以及预马氏体相变内耗

在千周和兆周两个频段分别测量了含Cd为46.1at％,47.5at％,50.0at％和52.5at％的AuCd合金中与马氏体转变有关的内耗和杨氏模量。实验结果表明,在千周范围,由于马氏体转变引起的Q^-1(内耗)是静滞后型的。Q^-1峰的形成可以用弹性软化及界面位错的静滞后阻尼机制来解释。而兆周范围的超声衰减是与频率有关的,表明尚有共振型及弛豫型阻尼的成份。此外,实验还观察到AuCd合金的等温马氏体转变Q^-1峰以及预马氏体相变Q^-1峰。 关键词：     

急冷Al-Si超导合金的负磁阻效应

本文研究了热处理对急冷(快速淬火)Al-11.3at％Si共晶合金的微观结构和超导电性的影响。实验发现100℃/50hr退火样品在超导-正常转变区内有负磁阻效应,这表明在这种样品中存在两个超导相。 关键词：     

急冷Al-Si-Ge合金超导电性的研究

本文研究了热处理对急冷Al-8.3at%Si-8.5at%Ge合金的微观结构及超导电性的影响。结构分析表明,液态淬火的样品由两相组成:过饱和α-Al(Si,Ge)固溶体基体和Al,Si,Ge的非晶球体,后者在基体中相互连接,构成连续通路。经过100℃/50h热处理后,非晶球体尺寸缩小,不再构成连续通路,并在其中析出弥散的Si(Ge)微晶。热处理后的样品的电阻-温度及电阻-磁场转变曲线上均出现两次正常-超导转变。它可以用样品中存在两个超导相的模型予以解释。 关键词：     

钆-铟二元系合金相图

用差热分析法、X射线衍射法和金相显微镜观察法研究了Gd-In二元系合金相图,实验证实了有六个中间相:Gd₃In,Gd₂In,Gd₅In₃,Gdln,Gd₂In₃和Gdln₃,有五个共晶转变,分别与～12at％In(共晶温度988℃),～30.5at％In(1151℃),～38.5at％In(1114℃),～64.5at％In(1010℃)以及100at％ 关键词：     

急冷Al-lat%Ge过饱和固溶体合金的正常-超导转变特性

本文研究了急冷Al-1at%Ge过饱和固溶体合金的结构和正常-超导转变特性。X射线结构分析表明,样品为单一的过饱和α-Al(Ge)固溶体。电阻-温度测量指出,急冷过饱和α-Al(Ge)合金的T_c≈1.44K,高于纯Al的T_c。 关键词：     

急冷Al-Si合金超导电性的研究

本文研究了热处理对急冷Al-11.3at％Si合金的微观结构及超导电性的影响,结构分析表明,液态淬火的样品由两相组成:过饱和α-Al(Si)固溶体晶体相和Al,Si原子按统计分布的非晶相,经100℃/50小时热处理后,α-Al(Si)固溶体贫化,非晶相中析出Si的小颗粒,经200℃/100小时热处理的样品已趋向平衡态结构,测量了样品的临界温度,在研究磁场中的超导-正常转变时发现了反常的磁阻效应,它可以用样品中存在两个超导相的模型予以解释。 关键词：     

Nd1.85Ce0.15CuO4－δ单晶c-轴方向电阻的低场行为

采用自助熔剂缓冷法成功地生长出了Nd_1.85Ce_{0. 15}CuO_4-δ单晶，其零场下零电阻温度约为21K. 在0—0.5T范围内分别测量了磁场平行和垂直样品表面的电阻转变曲线以及0.5T不同角度下的电阻转变曲线. 结果显示磁场平行和垂直样品表面时的转变温度T_p随磁场的变化均服从H=H₀(1-T_p(h)/T_p(0))²关系. 0.5T 关键词： 1.85Ce_0.15CuO_4-δ单晶')" href="#">Nd_1.85Ce_0.15CuO_4-δ单晶 输运性质     

Ti/Pr0.7Ca0.3MnO3/La0.67Sr0.33MnO3/Pt异质结电致电阻效应的改善

采用脉冲激光沉积技术制备了Ti/Pr_0.7Ca_0.3MnO₃/Pt和Ti/Pr_0.7Ca_0.3MnO₃/La_0.67Sr_0.33MnO₃/Pt异质结并研究了La_0.67Sr_0.33MnO₃功能插层对异质结电致电阻特性的影响. 实验结果表明La_0.67Sr_0.33MnO₃功能层的引入有效提高了器件的电阻转变特性,尤其是电阻转变率和疲劳性得到了极大的改善. 对La_0.67Sr_0.33MnO₃插层改善电致电阻转变特性的机理进行了定性的分析. 关键词： 电致电阻效应 电阻转变比率 疲劳特性     

CuSn合金熔体结构转变及其动力学行为探索

迄今为止,人们对合金在液相线之上的熔体结构转变过程的认识仍不清晰. 本文运用电阻法、DSC热分析等实验手段,对CuSn60wt%二元合金熔体在升温及保温条件下的结构转变动力学过程进行了研究,并通过相变动力学理论探讨了转变过程的特征与微观物理机制. 分析表明：合金熔体中温度诱导的结构转变过程符合“形核-长大”类型,其动力学过程为自动催化转变模式,其中液相中新结构原子团簇的“形核率”为转变速率的主导控制因素.     

CuSn合金熔体结构转变及其动力学行为探索

迄今为止,人们对合金在液相线之上的熔体结构转变过程的认识仍不清晰. 本文运用电阻法、DSC热分析等实验手段,对CuSn60wt%二元合金熔体在升温及保温条件下的结构转变动力学过程进行了研究,并通过相变动力学理论探讨了转变过程的特征与微观物理机制. 分析表明：合金熔体中温度诱导的结构转变过程符合“形核-长大”类型,其动力学过程为自动催化转变模式,其中液相中新结构原子团簇的“形核率”为转变速率的主导控制因素.     

The analysis of impact forces in randomly vibrating elastic systems

This work is concerned with the characteristics of the impact force produced when two randomly vibrating elastic bodies collide with each other, or when a single randomly vibrating elastic body collides with a stop. The impact condition includes a non-linear spring, which may represent, for example, a Hertzian contact, and in the case of a single body, closed form approximate expressions are derived for the duration and magnitude of the impact force and for the maximum deceleration at the impact point. For the case of two impacting bodies, a set of algebraic equations are derived which can be solved numerically to yield the quantities of interest. The approach is applied to a beam impacting a stop, a plate impacting a stop, and to two impacting beams, and in each case a comparison is made with detailed numerical simulations. Aspects of the statistics of impact velocity are also considered, including the probability that the impact velocity will exceed a specified value within a certain time.     

Instability of traveling waves in an optical waveguide

Instability of traveling IR waves within a waveguide structure is discussed. A practical model of a traveling wave amplifier of a solid state is proposed, utilizing an optical waveguide. The mechanism of instability is interpreted in terms of an interaction between a plasmon wave and a circuit one under a constraining boundary condition. Properties of the traveling amplification and related problems are discussed, with appropriately suggested semiconductor materials and device designs. The features of the amplifier are a simple structure, a low DC biasing power dissipation for room-temperature operation, unidirectionality, and a wide wavelength range from IR or submillimeter order, suited to various applications.     

A string-modified four-dimensional gravity theory

The route from string theory to a ten-dimensional supergravity/super-Yang-Mills field theory is briefly illumined. The process of extracting a classical four-dimensional gravity theory from the ten-dimensional theory is discussed and a simple model containing gravity, electromagnetism, a dilaton field, and a Kalb-Ramond field is proposed. The equations of motion of a test particle in a background of gravity, dilation, and Kalb-Ramond fields are displayed. Some static spherically symmetric vacuum solutions are derived, and some astrophysical implications are discussed.     

Reconstruction of the acoustic impedance profile in a plate using an inverse spectral procedure

An inverse spectral procedure was applied to reconstruct the acoustic impedance profile along the thickness direction of a plate using its thickness resonance frequencies, density and thickness. For a successful reconstruction, the material-property profile must be symmetric about the mid-plane of the plate. Several cases of numerical simulations, including plates with a few layers and with a high number of layers are described. The calculated resonance frequencies were used to reconstruct the acoustic impedance profile, a process that was successful for all cases. We assume that a plate with a high number of layers, each with a different but constant acoustic impedance, simulates a plate with a smoothly varying acoustic impedance profile. It can be concluded that such a plate, which generates small, virtually undetectable, internally reflected waves, can also be reconstructed. In the special case of a plate of unknown thickness and unknown but constant density, the method is still useful, because a relative variation of the material property can be reconstructed using only the resonance frequencies. An experiment using a resonance-mode electromagnetic acoustic transducer (resonance-mode EMAT) is also described. EMAT is a non-contact ultrasonic method that can measure thickness resonance frequencies, making it appropriate for this method. Some examples of applications are measurement of the temperature profile inside a rolled metal sheet, measurement of a clad metal plate, and monitoring of a metal casting.     

单电子在含有双能级原子的空腔中的输运行为

本文构造了一个含有双能级原子的空腔系统,用来模拟一个含有双能级量子点的微腔系统, 并研究其对电子输运行为的影响.通过对该系统输运方程的求解,给出了系统输运系数的具体表达式,然后通过调整空腔及原子的本征特性以及两者的耦合性质,研究了电子在腔体中的输运行为对腔体本征属性的依赖关系. 这些结果可以为如何操控电子在微观结构器件中的输运特性提供一定的理论支持.     

Comparisons of predicted steady-state levels in rooms with extended- and local-reaction bounding surfaces

A combined beam-tracing and transfer-matrix model for predicting steady-state sound-pressure levels in rooms with multilayer bounding surfaces was used to compare the effect of extended- and local-reaction surfaces, and the accuracy of the local-reaction approximation. Three rooms—an office, a corridor and a workshop—with one or more multilayer test surfaces were considered. The test surfaces were a single-glass panel, a double-drywall panel, a carpeted floor, a suspended-acoustical ceiling, a double-steel panel, and glass fibre on a hard backing. Each test surface was modeled as of extended or of local reaction. Sound-pressure levels were predicted and compared to determine the significance of the surface-reaction assumption. The main conclusions were that the difference between modeling a room surface as of extended or of local reaction is not significant when the surface is a single plate or a single layer of material (solid or porous) with a hard backing. The difference is significant when the surface consists of multilayers of solid or porous material and includes a layer of fluid with a large thickness relative to the other layers. The results are partially explained by considering the surface-reflection coefficients at the first-reflection angles.     

Evolution of Classical and Quantum States in the Groupoid Picture of Quantum Mechanics

The evolution of states of the composition of classical and quantum systems in the groupoid formalism for physical theories introduced recently is discussed. It is shown that the notion of a classical system, in the sense of Birkhoff and von Neumann, is equivalent, in the case of systems with a countable number of outputs, to a totally disconnected groupoid with Abelian von Neumann algebra. The impossibility of evolving a separable state of a composite system made up of a classical and a quantum one into an entangled state by means of a unitary evolution is proven in accordance with Raggio’s theorem, which is extended to include a new family of separable states corresponding to the composition of a system with a totally disconnected space of outcomes and a quantum one.     

组合非球面太阳能聚光镜的光学设计

提出了一种组合非球面反射型太阳能聚光镜并给出了设计方法。聚光镜由38片非球面组成,每一片非球面都由一组特定系数C,a₂,a₄,a₆,a₈,a₁₀的偶次非球面方程决定,是此特定非球面的一部分。根据非球面方程和光反射定律矢量形式,导出了非球面内壁上太阳反射光束的方向矢量与非球面系数C,a₂,a₄,a₆,a₈,a₁₀的关系,适当地选择这些非球面系数,即适当地调整非球面面型,可以使太阳反射光束具有特定的方向矢量,使入射到非球面内壁上的太阳光束反射后全部聚焦在某一特定的区域内,形成小的光斑。每组特定系数都用粒子群优化算法求得,并经计算机模拟和实验证明其聚焦效果。聚光镜的光束压缩比为330：1,其聚焦光斑可作为一种高温热源,而此聚光镜可以用在太阳能加热装置中。     

Synthesis of magnetic systems producing field with maximal scalar characteristics

A method of synthesis of the magnetic systems (MSs) consisting of uniformly magnetized blocks is proposed. This method allows to synthesize MSs providing maximum value of any magnetic field scalar characteristic. In particular, it is possible to synthesize the MSs providing the maximum of a field projection on a given vector, a gradient of a field modulus and a gradient of a field energy on a given directing vector, a field magnitude, a magnetic flux through a given surface, a scalar product of a field or a force by a directing function given in some area of space, etc. The synthesized MSs provide maximal efficiency of permanent magnets utilization. The usage of the proposed method of MSs synthesis allows to change a procedure of projecting in principal, namely, to execute it according to the following scheme: (a) to choose the sizes, a form and a number of blocks of a system proceeding from technological (economical) reasons; (b) using the proposed synthesis method, to find an orientation of site magnetization providing maximum possible effect of magnet utilization in a system obtained in (a). Such approach considerably reduces a time of MSs projecting and guarantees maximal possible efficiency of magnets utilization. Besides it provides absolute assurance in “ideality” of a MS design and allows to obtain an exact estimate of the limit parameters of a field in a working area of a projected MS.The method is applicable to a system containing the components from soft magnetic material with linear magnetic properties.     

具有态守恒赝隙的光子晶体中两能级原子自发辐射的增强与抑制

论证了在赝带隙光子晶体中存在一个全频率域态总数守恒规则，在完全带隙光子晶体中还存在一个局域态总数守恒规则.态总数守恒规则指出，如果一个光子晶体的态密度在某些频率范围存在相对于等效介质态密度的谷，则一定由其他频率范围内相对于等效介质态密度的峰来补偿.使用符合态总数守恒规则的态密度模型，解释了态密度调制导致的自发辐射谱增强、抑制、变窄、红移、蓝移以及谱分裂等光子晶体中的量子光学现象.该理论比较适合研究在具有赝带隙的光子晶体中大量随机分布的发光原子或分子的自发辐射行为. 关键词： 光子晶体 自发辐射 态密度 光子赝带隙