Ribonucleic acid as a novel ionophore for potentiometric membrane sensors of some transition metal ions

Ribonucleic acid (RNA) is used as a novel ionophore in plasticized poly(vinyl chloride) matrix membrane sensors for some transition metal ions. Membranes incorporating RNA and doped in Cu(2+), Cd(2+) and Fe(2+) display fast near-Nernstian and stable responses for these ions with cationic slopes of 31.1, 31.3 and 35.5 mV per decade, respectively, over the concentration range 10(-6)-10(-2) M and pH range 4-6.5. The cadmium RNA-based sensor shows no interference by Cu(2+), Fe(2+) Hg(2+) and Ag(+), which are known to interfere significantly with the solid-state CdS/Ag(2)S membrane electrode. The copper RNA-based sensor displays general potentiometric characteristics similar to those based on macrocyclic ionophores and organic ion exchangers and has the advantage of a better selectivity for Cu(2+) over some alkaline earth, divalent and transition metal ions. The iron RNA-based membrane sensor exhibits no interference by Hg(2+) and Zn(2+), which are known to interfere with other previously suggested sensors. The nature and composition of the RNA ionophore and its cadmium complex are examined using electrophoresis, Fourier-transform infrared analysis, elemental analysis and X-ray fluorescence techniques.     

A methionine-based turn-on chemical sensor for selectively monitoring Hg2+ ions in 100% aqueous solution

Dansyl-labeled methionine is synthesized by solid-phase synthesis, and found to be a highly sensitive and selective sensor for Hg(2+). The sensor sensitively detects Hg(2+) ions in aqueous solution by a turn-on response; however, the sensor detects Hg(2+) ions by a turn-off response in organic and mixed aqueous-organic solutions. We investigated the binding stoichiometry, binding constant, and binding mode of the sensor under various solvent conditions. In 100% aqueous solution, 2 : 1 complexation of the sensor with Hg(2+) ions is more favorable than 1 : 1 complexation, whereas the sensor preferentially forms a 1 : 1 complex in 100% CH(3)CN or in 50% CH(3)CN-aqueous solutions. Results reveal that the stoichiometry of the sensor-Hg(2+) complex plays an important role in the type of response to Hg(2+) ions, and that 2 : 1 complexation is required for a turn-on response to Hg(2+) ions in aqueous solution.     

Oligonucleotide-functionalized gold nanoparticles-enhanced QCM-D sensor for mercury(II) ions with high sensitivity and tunable dynamic range

A quartz crystal microbalance with dissipation monitoring (QCM-D) sensor was developed for highly sensitive and specific detection of mercury(II) ions (Hg(2+)) with a tunable dynamic range, using oligonucleotide-functionalized gold nanoparticles (GNPs) for both frequency and dissipation amplification. The fabrication of the sensor employed a 'sandwich-type' strategy, and formation of T-Hg(2+)-T structures in linker DNA reduced the hybridization of the GNPs-tagged DNA on the gold electrode, which could be used as the molecular switch for Hg(2+) sensing. This QCM-D mercury sensor showed a linear response of 10-200 nM, with detection limits of 4 nM and 7 nM for frequency and dissipation measurements, respectively. Moreover, the dynamic range of the sensor could be tuned by simply altering the concentration of linker DNA without designing new sensors in the cases where detection of Hg(2+) at different levels is required. This sensor afforded excellent selectivity toward Hg(2+) compared with other potential coexisting metal ions. The feasibility of the sensor was demonstrated by analyzing Hg(2+)-spiked tap- and lake-water samples with satisfactory recoveries. The proposed approach extended the application of the QCM-D system in metal ions sensing, and could be adopted for the detection of other analytes when complemented with the use of functional DNA structures.     

A simple and sensitive fluorescent sensing platform for Hg²+ ions assay based on G-quenching

In this work, a novel fluorescence biosensor was demonstrated for detection of Hg(2+) ions with relatively high selectivity and sensitivity. The sensing scheme was based on G-quenching induced by Hg(2+) ions. In the presence of Hg(2+) ions, the single-stranded signal probe which has carboxylfluorescein (FAM) and guanine segment at its 5' and 3' ends, respectively, folded into duplex-like structure via the Hg(2+)-mediated coordination of T-Hg(2+)-T base pairs. It brought guannine segment close to the dye and caused a remarkable decrease of fluorescence signal. The sensor showed a sensitive response to Hg(2+) ions in a concentration range from 0.5 to 10 μM, and a detection limit of 0.5 nM was given. This homogeneous system required only a single-labeled oligonucleotide, operated by concise procedures, and possessed comparable sensitivity as previous approaches. Furthermore, the sensor exhibits a great perspective for future practical applications.     

Colorimetric assay for mercury (II) based on mercury-specific deoxyribonucleic acid-functionalized gold nanoparticles

A colorimetric nanoprobe-mercury-specific DNA-functionalized gold nanoparticles (Au-MSD) was developed for sensing Hg(2+). The new mercury-sensing concept relies on measuring changes in the inhibition of "non-crosslinking" aggregation of Au-MSD-induced by the folding of mercury-specific DNA strand through the thymine-Hg(2+)-thymine (T-Hg(2+)-T) coordination. In the absence of Hg(2+), a high concentration of MgCl(2) (50 mM) results in a rapid aggregation of Au-MSD because of the removal of charge repulsion. When Hg(2+) is present, the particles remain stable due to the folding of MSD functionalized on the particle surface. The assay enables the colorimetric detection of Hg(2+) in the concentration range of 0.1-10 μM Hg(2+) ions with a detection limit of 60 nM, and allows for the selective discrimination of Hg(2+) ions from the other competitive metal ions. Toward the goal for practical applications, the sensor was further evaluated by monitoring Hg(2+) in fish tissue samples.     

Rhodamine-based highly sensitive colorimetric off-on fluorescent chemosensor for Hg2+ in aqueous solution and for live cell imaging

A novel rhodamine-based highly sensitive and selective colorimetric off-on fluorescent chemosensor for Hg(2+) ions is designed and prepared by using the well-known thiospirolactam rhodamine chromophore and furfural hydrazone as signal-reporting groups. The photophysical characterization and Hg(2+)-binding properties of sensor RS1 in neutral N, N-dimethylformamide (DMF) aqueous solution are also investigated. The signal change of the chemosensor is based on a specific metal ion induced reversible ring-opening mechanism of the rhodamine spirolactam. The response of the chemosensor for Hg(2+) ions is instantaneous and reversible. And it successfully exhibits a remarkably "turn on" response toward Hg(2+) over other metal ions (even those that exist in high concentration). Moreover, this sensor is applied for in vivo imaging in Rat Schwann cells to confirm that RS1 can be used as a fluorescent probe for monitoring Hg(2+) in living cells with satisfying results, which further demonstrates its value of practical applications in environmental and biological systems.     

A novel cationic triazatetrabenzcorrole: selective detection of mercury(II) by nucleic acid-induced aggregation

In the present work, a novel water-soluble cationic triazatetrabenzcorrole compound was synthesised. Its aggregation and fluorescence quenching properties are demonstrated by serval methods, such as UV-vis and fluorescence spectroscopic studies and naked-eye visualization. Unlike the traditional Hg(2+) sensor based on thymine-Hg(2+)-thymine, we use a novel approach, exploiting the high affinity of Hg(2+) for sulfur in phosphorothioate DNA. Based on the S-Hg(2+)-S pairs, we designed the phosphorothioate DNA T4G4-S3 as an Hg(2+) sensor, which can detect Hg(2+) sensitively and selectively in aqueous solution. And this sensing system is fairly fast and convenient.     

Inorganic-organic Ag-rhodamine 6G hybrid nanorods: "turn on" fluorescent sensors for highly selective detection of Pb2+ ions in aqueous solution

Lead metal ions are of great concern and the monitoring of their concentration in the environment has become extremely important. In the present study, a new inorganic-organic hybrid assay of Ag nanorods (AgNR)-Rhodamine 6G (R6G) was developed for the sensitive and selective determination of Pb(2+) ions in aqueous solutions. To the best of our knowledge there is almost no literature on the use of silver nanorod sensors for determination of lead ions in aqueous solutions. The sensor is developed by the coating of R6G on the surface of AgNRs. The sensing is based on the photoluminescence of R6G. The sensor was rapid as the measurements were carried out within 3 min of addition of the test solution to the AgNR-R6G hybrid. Moreover, the system showed excellent stability at tested concentration levels of Pb(2+) ions. The naked eye detection of the colour was possible with 1 mg L(-1) of Pb(2+) ions. The present method has a detection limit of 50 μg L(-1) of Pb(2+) (for a signal/noise (S/N) ratio > 3). The selectivity toward Pb(2+) ions against other metal ions was improved using chelating agents. The proposed method was validated by analysis using different techniques.     

Detection of mercury and phenylmercury ions using DNA-based fluorescent probe

A DNA probe labeled with a 4-([4-(dimethylamino)phenyl]azo)benzoic acid (DABCYL) quencher and a carboxyfluorescein (FAM) donor at its 5'- and 3'-termini can be used for the detection of Hg(2+) ions and phenylmercury ions (PhHg(+)). This DNA probe possesses a random coil structure that changes into a hairpin-like structure upon binding Hg(2+) and PhHg(+) ions. As a result, the fluorescence of the FAM unit decreased through quenching between the donor and the quencher. In the presence of ethylenediaminetetraacetic acid (EDTA), the DNA probe allowed the selective detection of PhHg(+) ions at concentrations as low as 70.0 nM, mainly as a result of T-Hg(2+)-T coordination and π-π stacking between the Ph unit and DNA bases. A linear correlation existed between the fluorescence intensity and the concentration of PhHg(+) ions over the range from 0.10 to 1.0 μM (R(2) = 0.99). After acid hydrolysis and neutralization of the samples, all of the mercury species are converted to Hg(2+) ions, allowing us to use the DNA-based probe to determine the concentrations of total mercury species at the nM level. The practicality of this probe has been validated by the analyses of pond water and fish samples, showing its advantages of sensitivity, selectivity, and simplicity.     

A new "turn-on" naphthalenedimide-based chemosensor for mercury ions with high selectivity: successful utilization of the mechanism of twisted intramolecular charge transfer, near-IR fluorescence, and cell images

For the first time, a new near-IR "turn-on" fluorescent chemosensor with high selectivity for Hg(2+) ions was designed according to the twisted intramolecular charge transfer (TICT) mechanism. The selective fluorescence enhancement effect can be optimized by modulating the solvent systems. And this naphthalenedimide-based sensor with long wavelength absorption and emission can be used to image intracellular Hg(2+) ions in living Hela cells.     

A versatile water soluble fluorescent probe for ratiometric sensing of Hg2+ and bovine serum albumin

A novel tetraazamacrocycle fluorescent sensor (6-(1-(dimethylamino)-5-naphthalene sulfonyl)-3,6,9,15-tetraazabicyclo[9.3.1] pentadeca-1(15),11,13-triene, 1) has been designed and prepared, which can be utilized for selective and ratiometric sensing of Hg(2+) and bovine serum albumin (BSA) with two different responsive modes in aqueous solution at physiological pH (50 mM Tris-HCl, pH 7.6). Above 0.5 ppb Hg(2+) can be discerned by coordination with 1 and the emission color changes enable 1 to be applied to a fast Hg(2+) test paper assay. Sensor 1 has also been demonstrated to be easily cell-penetrable and applicable for Hg(2+) imaging in living cells. Imaging of BSA in the gel using SDS-PAGE (sodium dodecyl sulfate polyacrylamide gel electrophoresis) stained in the medium containing 1 verified that the binding of 1 and BSA was successful in the presence of nonprotein substances. The linear range of 1 towards BSA utilizing ratiometric fluorescent calibration via noncovalent interaction in solution is 0-100 μg mL(-1) with a detection limit of 1 μg mL(-1), and has been successfully employed to determine the albumin concentration in blood serum by means of ratiometric fluorescent measurements for the first time. Finally, sensor 1 behaves as a fluorescent molecular switch composed of triple logic gates upon chemical inputs of Hg(2+) and BSA, which potentially provides intelligent diagnostics for Hg(2+) contaminated serum on the nanoscale.     

Au nanowire-on-film SERRS sensor for ultrasensitive Hg2+ detection

We report an ultrasensitive and selective single nanowire-on-film (SNOF) surface-enhanced resonance Raman scattering (SERRS) sensor for Hg(2+) detection based on structure-switching double stranded DNAs (dsDNAs). Binding of Hg(2+) induces conformational changes of the dsDNAs and let a Raman reporter get close to the SNOF structure, thereby turning on SERRS signal. The well-defined SNOF structure provides a detection limit of 100 pM with improved accuracy in Hg(2+) detection. This sensor is stable over a considerable amount of time and reusable after simple treatment. Since this SNOF sensor is composed of a single Au NW on a film, development of a multiplex sensor would be possible by employing NWs modified by multiple kinds of aptamers.     

2,1,3-Benzoxadiazole-based selective chromogenic chemosensor for rapid naked-eye detection of Hg2+ and Cu2+

We report a simple twisted intramolecular charge transfer (TICT) chromogenic chemosensor for rapid and selective detection of Hg(2+) and Cu(2+). The sensor was composed of an electron-acceptor 4-fluoro moiety and an electron-donor 7-mercapto-2,1,3-benzoxadiazole species where the S together with the 1-N provided the soft binding unit. Upon Hg(2+) and Cu(2+) complexation, remarkable but different absorbance spectra shifts were obtained in CH(3)CN-H(2)O mixed buffer solution at pH 7.6, which can be easily used for naked-eye detection. The sensor formed a stable 2:1 complex with Cu(2+), and both 2:1 and 3:1 complexes with Hg(2+). While alkali-, alkaline earth- and other heavy and transition metal ions such as Na(+), Mg(2+), Mn(2+), Co(2+), Ni(2+), Ag(+), Zn(2+), Pb(2+) and Cd(2+) did not cause any significant spectral changes of the sensor. This finding is not only a supplement to the detecting methods for Hg(2+) and Cu(2+), but also adds new merits to the chemistry of 4,7-substituted 2,1,3-benzoxadiazoles.     

Voltammetric detection of lead(II) and mercury(II) using a carbon paste electrode modified with thiol self-assembled monolayer on mesoporous silica (SAMMS)

The anodic stripping voltammetry at a carbon paste electrode modified with thiol terminated self-assembled monolayer on mesoporous silica (SH-SAMMS) provides a new sensor for simultaneous detection of lead (Pb2+) and mercury (Hg2+) in aqueous solutions. The overall analysis involved a two-step procedure: an accumulation step at open circuit, followed by medium exchange to a pure electrolyte solution for the stripping analysis. Factors affecting the performance of the SH-SAMMS modified electrodes were investigated, including electrode activation and regeneration, electrode composition, preconcentration time, electrolysis time, and composition of electrolysis and stripping media. The most sensitive and reliable electrode contained 20% SH-SAMMS and 80% carbon paste. The optimal operating conditions were a sequence with a 2 min preconcentration period, then a 60 s electrolysis period of the preconcentrated species in 0.2 M nitric acid, followed by square wave anodic stripping voltammetry from -1.0 V to 0.6 V in 0.2 M nitric acid. The areas of the peak responses were linear with respect to metal ion concentrations in the ranges of 10-1500 ppb Pb2+ and 20-1600 ppb Hg2+. The detection limits for Pb2+ and Hg2+ were 0.5 ppb Pb2+ and 3 ppb Hg2+ after a 20 min preconcentration period.     

Single sensor for two metal ions: colorimetric recognition of Cu2+ and fluorescent recognition of Hg2+

The first novel rhodamine B based sensor, rhodamine B hydrazide methyl 5-formyl-1H-pyrrole-2-carboxylate Schiff base (2) capable of detecting both Cu(2+) and Hg(2+) using two different detection modes has been designed and synthesized. The metal ion induced optical changes of 2 were investigated in MeOH:H(2)O (3:1) HEPES buffered solution at pH 7.4. Sensor 2 exhibits selective colorimetric recognition of Cu(2+) and fluorogenic recognition of Hg(2+) with UV-vis and fluorescence spectroscopy, respectively. Moreover, both of the Cu(2+) and Hg(2+) recognition processes are proven to be hardly influenced by other coexisting metal ions.     

Rational design and synthesis for versatile FRET ratiometric sensor for Hg2+ and Fe2+: a flexible 8-hydroxyquinoline benzoate linked Bodipy-porphyrin dyad

A flexible 8-hydroxyquinoline benzoate linked Bodipy-porphyrin dyad has been designed, synthesized, and characterized. Binding of this dyad with Hg(2+)/Fe(2+) induced just the opposite (promoting/restraining) influence on energy transfer from the Bodipy donor to the porphyrin acceptor, resulting in a remarkably different ratio change of two signal emissions, endowing this dyad as the first Bodipy-porphyrin-based versatile fluorescence resonance energy transfer (FRET) ratiometric sensor for Hg(2+) and Fe(2+) ions, respectively.     

Synthesis and characterization of electroactive ferrocene derivatives: ferrocenylimidazoquinazoline as a multichannel chemosensor selectively for Hg2+ and Pb2+ ions in an aqueous environment

The synthesis and characterization of ferrocene (Fc) derivatives 4-[2,5-diferrocenyl-4-(4-pyridyl)imidazolidin-1-ylmethyl]pyridine (1), ferrocenylmethylenepyridin-3-ylmethylamine (2), N,N'-bis(ferrocenylmethylene)-2,4,6-trimethylbenzene-1,3-diamine (3), and 6-ferrocenyl-5,6-dihydro[4,5]imidazo[1,2-c]quinazoline (4) have been described. Structures of 1, 2, and 4 have been determined by single-crystal X-ray diffraction analyses. At 25 °C, 1-3 are nonfluorescent, while 4 displays moderate fluorescence and chromogenic, fluorogenic, and electrochemical sensing selectively toward Hg(2+) and Pb(2+) ions. Association constants (K(a)) for Hg(2+) and Pb(2+) have been determined by the Benesi-Hildebrand method. Job's plot analysis supported 1:1 and 1:2 stoichiometries for Hg(2+) and Pb(2+) ions. Cyclic voltammograms of 1-4 exhibited reversible waves corresponding to a ferrocene/ferrocenium couple. The wave associated with 4 (+0.0263 V) exhibited positive (ΔE(pa) = 0.136 V) and negative (ΔE(pa) = 0.025 V) shifts in the presence of Hg(2+) and Pb(2+) ions, respectively. The mode of interaction between metal ions and 4 has been supported by (1)H NMR spectroscopy and mass spectrometry studies and verified by theoretical studies. It presents the first report dealing with ferrocene-substituted quinazoline as a multichannel chemosensor for Hg(2+)/Pb(2+) ions.     

Highly sensitive and specific determination of mercury(II) ion in water, food and cosmetic samples with an ELISA based on a novel monoclonal antibody

Mercury is one of the most toxic heavy metals present in the environment. In this study, a highly sensitive and specific monoclonal antibody (mAb)-based indirect competitive enzyme-linked immunosorbent assay (ELISA) for the determination of Hg(2+) was developed. A new bifunctional ligand, 6-mercaptonicotinic acid (MNA), which contains a pyridine ring bearing a carboxylic group and a mercapto group, was selected for the preparation of immunogen. After immunization of mice and performing the hybridoma technique, the obtained mAb was characterized for its binding affinity and selectivity for Hg(2+). Based on this novel mAb, an ELISA was established. At optimal experimental conditions, the standard curve of the ELISA for Hg(2+) was constructed in concentration range of 0.1-100 ng mL(-1). The values of IC(50) and LOD of the assay were found to be 1.12 and 0.08 ng mL(-1). The cross-reactivity was lower than 2% with MNA, CH(3)Hg, and CH(3)Hg-MNA and was 11.5% and 4.4% for Hg(+) and Au(3+), respectively. No cross-reactivity was found with other metal ions such as Cu(2+), Sn(2+), Ni(2+), Mn(2+), Pb(2+), Zn(2+), Cd(2+), Fe(2+), Co(2+), Mg(2+), Ca(2+), and anions such as Cl(-), NO(3)(-), NO(2)(-), HCO(3)(-), F(-), and SO(4)(2-), indicating that the assay displays not only high sensitivity but also high selectivity. Different kinds of samples including water, milk, green vegetable, kelp, facial cleanser, and night cream were spiked with Hg(2+) and the extracts were analyzed by ELISA. Acceptable recovery rates of 80.0-113.0% and coefficients of variation of 1.9-18.6% were obtained. A linear relationship between ELISA and cold-vapor atomic fluorescence spectroscopy (CV-AFS) as indicated by a correlation coefficient of 0.97 for liquid samples (water samples) and 0.98 for other samples was obtained. The proposed mAb-based ELISA provides a feasible analytical method for highly sensitive and specific, fast, simple, and accurate determination of uncomplexed trace Hg(2+) in environmental and food samples.     

Selective fluorescent Hg(II) detection in aqueous solutions with a dye intermediate

A dye intermediate, 1-amino-8-naphthol-3,6-disulfonic acid sodium (ANDS) was first used to selectively recognize Hg(II) in aqueous solutions with its fluorescence being strong quenched. The fluorescence quenching of ANDS was attributed to the formation of an inclusion complex between Hg(II) and ANDS by 2:1 complex ratio (K=6.2 x 10(9)), which has been utilized as the basis of the fabrication of the Hg(II)-sensitive fluorescent chemosensor. The analytical performance characteristics of the proposed chemosensor were investigated. The sensor shows a linear response toward Hg(II) in the concentration range 2.9 x 10(-6) to 5.5 x 10(-5)M with a limit of detection of 5.3 x 10(-7)M, and a working pH range from 5.0 to 9.0. It shows excellent selectivity for Hg(II) over a large number of cations such as alkali, alkaline earth and transitional metal ions. The proposed method was utilized successfully for the detection of Hg(2+) in water samples.     

N-1-(2-mercaptoethyl)thymine modification of gold nanoparticles: a highly selective and sensitive colorimetric chemosensor for Hg2+

An approach for mercury ions (Hg(2+)) sensing based on the Hg(2+)-induced aggregation of thymine (T)-SH-functionalized gold nanoparticles (AuNPs) has been reported. The T-SH ligands that we synthesized can easily be coupled to the surface of AuNPs through the Au-S bond and can recognize Hg(2+) with high selectivity by forming a T-Hg-T complex with strong affinity. For the T-SH-functionalized AuNPs (T-S-AuNPs) sensor, upon addition of Hg(2+), the formation of the T-Hg-T complex induces aggregation of T-S-AuNPs and results in a significant change of color and UV-Vis absorption spectra. Thus, our method can be used for the rapid, easy and reliable screening of Hg(2+) in aqueous solution, with high sensitivity (2.8 nM) and selectivity over competing analytes. The developed method is successfully applied to the sensing of Hg(2+) in real environmental samples.