Kinetics study on the dissolution of UO_2 particles by microwave and conventional heating in 4 mol/L nitric acid

The dissolution of UO2 particles in 4 mol·L-1 nitric acid medium at temperatures of 90-110℃ by mi- crowave heating and conventional heating has been investigated, respectively. It is found that the dissolution ratios of UO2 particles by microwave heating were 10%-40% higher than that by conven- tional heating. Kinetics research shows that the dissolution of UO2 particles in 4 mol·L-1 nitric acid is controlled by the diffusion control model for microwave heating and by the surface reaction control model for conventional heating. The diffusion control model for the dissolution of UO2 particles by mi- crowave heating could be explained by the diffuseness on the surface of UO2 particles.     

Electrochemical dissolution of Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> in acid solutions

The present study deals with the electrochemical reductive dissolution of Mn₃O₄, which was added to carbon-paste electroactive electrodes (CPEEs) in acid solutions. It was found that in the experimental conditions the thermodynamically stable form of manganese was . Kinetic features of the electrochemical reductive dissolution of Mn₃O₄, which was realized under potential cycling conditions (+1.0 V→−0.7 V→+1.0 V), were determined by the electrode polarization direction. It was shown that the cathodic reduction of Mn₃O₄ was accomplished in three stages. Manganese was dissolved in the supporting solution only at the third stage. The first two stages involved solid-phase reactions. The anodic cycling stage included an active dissolution of Mn₃O₄ and the lower manganese oxide (MnO) accumulated on the electrode surface during the cathodic reduction.     

Dilatometry and high temperature x-ray diffractometry study of LaCrO<Subscript>3</Subscript> prepared using microwave heating

The phase transitions in the LaCrO₃ were studied using bulk dilatometry and high temperature X-ray diffractometry from room temperature to 1050 and 1200°C, respectively. LaCrO₃ was prepared at 500°C from oxalate precursor employing microwave heating technique. Bulk shrinkage measurements on LaCrO₃ pellets were carried out using dilatometer designed and fabricated in our own laboratory. Dilatometric curves of LaCrO₃ showed two peaks in ΔL/L vs. temperature curves in the range 200–400 and 800–1000°C, respectively. These phase transitions have been confirmed using high temperature X-ray diffractometry. The role of simple technique like bulk dilatometry in detecting and monitoring the polymorphic transformations in solids is discussed for lanthanum chromates.     

Properties of TRPO-HNO<Subscript>3</Subscript> complex used for direct dissolution of lanthanide and actinide oxides in supercritical fluid CO<Subscript>2</Subscript>

The mixed trialkylphosphine oxide-nitric acid (TRPO-HNO₃) complex prepared by contacting pure TRPO with concentrated HNO₃ may be used as additives for direct dissolution of lanthanide and actinide oxides in the supercritical fluid carbon dioxide (SCF-CO₂). Properties of the TRPO-HNO₃ complex have been studied. Experimental results show when the initial HNO₃/TRPO volume ratio is varied from 1:7 to 5:1, the concentration of HNO₃ in the TRPO-HNO₃ complex changes from 2.12 to 6.16 mol/L, the [HNO₃]/[TRPO] ratio of the TRPO-HNO₃ complex changes from 0.93 to 3.38, and the content of H₂O in the TRPO-HNO₃ complex changes from 0.97% to 2.70%. All of the density, viscosity and surface tension of the TRPO-HNO₃ complex change with the concentration of HNO₃ in the complex. The protons of HNO₃ and H₂O in the complex undergo rapid exchange to exhibit a singlet resonance peak in NMR spectra with D₂O insert. When the TRPO-HNO₃ complex dissolves in a low dielectric constant solvent, small droplets of HNO₃ appear which can be detected by NMR. Supported by the National Natural Science Foundation of China (Grant No. 20506014)     

Fast determination of reaction kinetic parameters with the use of microwave heating. Kinetics of decomposition of organic substances with nitric acid

A mathematical model for the kinetics of a chemical reaction under microwave irradiation in a close volume in the simplest approximation of the uniform temperature and pressure distribution in a system was proposed. The previously proposed dynamic method for determination of the activation energy of oxidation of organic substances with nitric acid was substantiated. According to this method, the activation energy is determined from the experimental exponential plot for the pressure in the nonisothermic system vs. inverse temperature of the reaction mixture. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1371–1375, June, 2005.     

Electrochemical Behavior of Cobalt-Dimethylglyoxime Complex Co(DMG)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript> in the Carbon Dioxide Reduction Process

The electrochemical behavior of a complex of cobalt with dimethylglyoxime Co(DMG)₂(H₂O)₂ is studied by cyclic voltametry. Peaks corresponding to redox transitions Co(III)/Co(II) and Co(II)/Co(I) are observed in the potential region 0.4 to ?1.8 V (Ag/AgCl). The product of reduction of the initial complex interacts with carbon dioxide to form a stable compound, probably an intermediate product of electrocatalytic reduction of CO₂ to CO in the presence of N₄-macrocyclic complexes of cobalt.     

Kinetics and reaction mechanism of phenol hydroxylation catalyzed by La-Cu<Subscript>4</Subscript>FeAlCO<Subscript>3</Subscript>

The present work synthesizes La-Cu₄FeAICO₃ catalyst under microwave irradiation and characterizes its structure using XRD and IR techniques. The results show that the obtained La-Cu₄FeAICO₃ has a hydrotalcite structure. In the phenol hydroxylation with H₂O₂ catalyzed by La-Cu₄FeAICO₃, the effects of reaction time and phenol/H₂O₂ molar ratio on the phenol hydroxylation, and relationships between the initial hydroxylation rate with concentration of the catalyst, phenol, H₂O₂ and reaction temperature are also investigated in details. It is shown the phenol conversion can reach 50.09% (mol percent) in the phenol hydroxylation catalyzed by La-Cu₄FeAICO₃, under the reaction conditions of the molar ratio of phenol/H₂O₂1/2, the amount ratio of phenol/catalyst 20, reaction temperature 343 K, reaction time 120 min, 10 ml_ distilled water as solvent. Moreover, a kinetic equation of v = k[La-Cu₄FeAlCO₃][C₆H₅OH][H₂O₂]. and the activation energy of E _a=58.37 kJ/mol are obtained according to the kinetic studies. Due to the fact that the HO-Cu⁺-OH species are detected in La-Cu₄FeAICO₃/H₂O₂ system by XPS, the new mechanism about the generation of hydroxyl free radicals in the phenol hydroxylation is proposed, which is supposed that HO-Cu⁺-OH species are transition state in this reaction.     

Effect of humic acid on the solid phase stability and solubility of UO<Subscript>2</Subscript>(OH)<Subscript>2</Subscript>

The stability and solubility of UO₂(OH)₂ has been studied as a function of the humic acid concentration in 0.1M NaClO₄, in the pH range from 4 to 7 under normal atmospheric conditions. The solid phase under investigation has been prepared by alkaline precipitation and characterized by TGA, ATR-FTIR, XRD, SEM and solubility measurements. According to the experimental data UO₂(OH)₂ is stable and remains the solubility limiting solid phase even in the presence of increased humic acid concentration in the solution. However, humic acid affects texture and particle size of the solid phase. Increasing humic acid concentration results in decreasing crystallite size of the UO₂(OH)₂ solid phase. Based on the solubility data, the logK _sp (UO₂(OH)₂) has been evaluated to be −22.0±0.3 and the stability constant for the UO₂(OH)HA(I) species has been estimated to be logβ ₁₁₀₁ = 15.3±0.5.     

Synthesis and structure of [UO<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>){CONH<Subscript>2</Subscript>N(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>}<Subscript>2</Subscript>]

The single crystals of [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] were synthesized and studied by X-ray diffraction. The crystals are monoclinic, a = 7.461(2) Å, b = 8.828(2) Å, c = 11.756(2) Å, β = 107.21(3)°, space group Pc, Z = 2, R = 2.94%. The structure comprises infinite chains [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] extended along [001] and corresponding to the AT¹¹M ₂ ¹ crystallochemical group (A = UO ₂ ²⁺ , T¹¹ = C₂O ₄ ^2? , M¹ = N,N-CONH₂N(CH₃)₂) of uranyl complexes. The chains are connected into a three-dimensional framework by hydrogen bonds involving the oxygen atoms of oxalate and uranyl ions and the N,N-dimethylcarbamide methyl groups.     

Kinetics of the oxidation of diethyl sulfide in the B(OH)<Subscript>3</Subscript>-H<Subscript>2</Subscript>O<Subscript>2</Subscript>/H<Subscript>2</Subscript>O system

Data obtained for the kinetics of oxidation of diethyl sulfide (Et₂S) by hydrogen peroxide in aqueous solution catalyzed by boric acid indicate that monoperoxoborates B(O₂H)(OH) ₃ ⁻ and diperoxoborates B(O₂H)₂(OH) ₂ ⁻ are the active species. The rates of the reactions of Et₂S with B(O₂H)(OH) ₃ ⁻ and B(O₂H)₂(OH) ₂ ⁻ are 2.5 and 100 times greater than with H₂O₂. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 1, pp. 38–42, January–February, 2007.     

Synthesis and study of sodium triuranate Na<Subscript>2</Subscript>(UO<Subscript>2</Subscript>)<Subscript>3</Subscript>O<Subscript>3</Subscript>(OH)<Subscript>2</Subscript>

Sodium triuranate Na₂(UO₂)₃O₃(OH)₂ was synthesized by the reaction between aqueous uranyl acetate solution and aqueous sodium nitrate solution under hydrothermal conditions at 200°C. The composition and structure of the synthesized compound were determined, and its dehydration and thermal decomposition were studied, by chemical analysis, X-ray diffraction, IR spectroscopy, and thermal analysis.     

Preparation and characterization of LiFePO<Subscript>4</Subscript> from NH<Subscript>4</Subscript>FePO<Subscript>4</Subscript>·H<Subscript>2</Subscript>O under different microwave heating conditions

Olivine-type LiFePO₄ is a very promising polyanion-type cathode material for lithium-ion batteries. In this work, LiFePO₄ with high specificity capacity is obtained from a novel precursor NH₄FePO₄·H₂O via microwave processing. The grains grow up in the duration of sintering until they reach the decomposition temperature. The apparent conductivity of the samples rises rapidly with the irradiation time and influences the electrochemical performance of the material greatly at high current density. As a result, the LiFePO₄ cathode material obtained with a sintering time of 15 min has good electrochemical performance. Between 2.5 and 4.2 V versus Li, a reversible capacity is as high as 156 mAh g⁻¹ at 0.05 C.     

Effect of the Composition of Modified SO<Stack><Subscript>4</Subscript><Superscript>2−</Superscript></Stack>/ZrO<Subscript>2</Subscript> on Catalytic Properties in Reduction of NO by Hydrocarbons

We have shown that the activity of cobalt-containing catalysts based on sulfated zirconium dioxide in selective catalytic reduction (SCR) of NO by methane depends on the amount of sulfur and the preparation method. Modification of Fe and Mn improves the catalytic behavior of SO ₄ ²⁻ /ZrO₂ as a result of the increase in the concentration of active sites.__________Translated from Teoreticheskaya i Eksperimental’naya Khimiya, Vol. 41, No. 2, pp. 121–125, March– April, 2005.     

Homogeneous catalytic fluoroalkylation of thiophenols,phenols and pyrrole by Freons BrCF<Subscript>2</Subscript>CF<Subscript>2</Subscript>Br and CF<Subscript>2</Subscript>ClCFCl<Subscript>2</Subscript>

The use of sulfur dioxide as an electron transfer mediator in the presence of nitrogen bases permits the rather selective fluoroalkylation of thiophenols, phenols, and pyrrole by Freons BrCF₂CF₂Br and CF₂ClCFCl₂ under mild conditions. In the case of thiophenols, the fluoroalkylation occurs to give polyfluoroalkyl aryl sulfides, while phenols and pyrrole are alkylated in the ring. Effects were found for the electronic structure of the substrates and basicity of the medium (pK_α of the pyridines) on the oxidation-reduction properties of the reagents and the efficiency of the reactions studied. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 5, pp. 315–322, September–October, 2007.     

Electrochemical Synthesis of Co-intercalation Compounds in the Graphite-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-H<Subscript>3</Subscript>PO<Subscript>4</Subscript>System

Anodic oxidation of highly oriented pyrolytic graphite in an electrolyte containing concentrated sulfuric and anhydrous phosphoric acids is studied for the first time. The synthesis was carried out under galvanostatic conditions at a current I = 0.5 mA and an elevated temperature (t = 80°C). Intercalation compounds of graphite (ICG) are shown to form at all concentration ratios of H₂SO₄ and H³PO⁴ acids. The intercalation compound of step I forms in solutions containing more than 80 wt % H₂SO₄, a mixture of compounds of intercalation steps I and II forms in 60% H²SO⁴, intercalation step II is realized in the sulfuric acid concentration range from 10 to 40%, and a mixture of compounds of intercalation steps III and II is formed in 5% H₂SO₄ solutions. The threshold concentration of H₂SO₄ intercalation is ∼2%. With the decrease in active intercalate (H₂SO₄) concentration, the charging curves are gradually smoothed, the intercalation step number increases, and the potentials of ICG formation also increase. As the sulfuric acid concentration in the electrolyte changes from 96 to 40 wt %, the filled-layer thickness d _i in ICG monotonously increases from 0.803 to 0.820 nm, which apparently is associated with the greater size of phosphoric acid molecules. With further increase in H₃PO₄ concentration in solution, d _i remains unchanged. According to the results of chemical analysis, both acids are simultaneously incorporated into the graphite interplanar spacing and their ratio in ICG is determined by the electrolyte composition.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 651–655.Original Russian Text Copyright © 2005 by Leshin, Sorokina, Avdeev.     

Structure and some properties of [UO<Subscript>2</Subscript>CrO<Subscript>4</Subscript>{CH<Subscript>3</Subscript>CON(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>}<Subscript>2</Subscript>]

A new complex [UO₂CrO₄{CH₃CON(CH₃)₂}₂] (I) was studied by thermal analysis, IR spectroscopy, and X-ray crystallography. The crystals are monoclinic: a = 13.8108(11) Å, b = 8.6804(7) Å, c = 13.0989(10) Å, β = 104.777(1)°, V = 1518.4(2) ų, space group P2₁/c, Z = 4, R = 2.39%. The structure of I contains infinite chains of the [UO₂CrO₄{CH₃CON(CH₃)₂}₂] composition running along [001]; the complex belongs to the AT¹¹M¹ ₂ crystal-chemical group (A = UO ₂ ²⁺ , T¹¹ = CrO ₄ ^2? , M¹ = CH₃CON(CH₃)₂) of uranyl complexes. The chains are linked into a three-dimensional framework due to hydrogen bonds between oxygen atoms of chromate ions and hydrogen atoms of methyl groups of the dimethylacetamide.     

Synthesis of LaCoO<Subscript>3</Subscript> from lanthanum trisoxalatocobaltate(III) (LTC) precursor employing microwave heating technique

Lanthanum cobaltite LaCoO₃, an important catalyst and an electronic material used as cathode in solid oxide fuel cells was prepared from lanthanum trisoxalatocobaltate(III) hydrate [LaCo(C₂O₄)₃]·9H₂O (LTC) employing microwave heating technique. It was observed that LTC heated in microwave heating system gives a pure product of LaCoO₃ at 400°C within one hour. Thermogravimetry, differential thermal analysis and X-ray diffraction techniques were used to optimize conditions for microwave processing of the precursor.Authors are thankful to Mr. N. A. Kulkarni and Mr. V. M. Chopade from TIFR, Mumbai for recording the XRD patterns of the sample.     

Electrotransport properties of ions in aqueous solutions of H<Subscript>2</Subscript>SeO<Subscript>4</Subscript> and Na<Subscript>2</Subscript>SeO<Subscript>4</Subscript>

Coefficients of self-diffusion, absolute speeds of movement of ions and the activation energy of electrical conductivity are found from the conductance measurements of aqueous solutions of selenic acid and sodium selenate at different concentrations in a temperature range of 288–318 K. Both the Stokes and effective radii of ions and their hydrate numbers at 298 K are calculated. The obtained results are interpreted in the frames of Samoilov theory on positive and negative hydration of ions.     

Chemisorption of SO<Subscript>2</Subscript> on the Zn-modified In<Subscript>2</Subscript>O<Subscript>3</Subscript> surface

Chemisorption of SO₂ and O₂ on the In₂O₃ surface containing a zinc additive (0.4–2.7 at.%) was studied in a temperature range of 22–200 °C. At least three forms of sorbed SO₂ exist on the modified In₂O₃ surface. The temperature affects the contribution of single forms of SO₂ sorption and, hence, the change in the electric conductivity. The preliminary sorption of O₂ favors the formation of a donor form of chemisorbed SO₂. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2228–2232, October, 2005.