General analytic solution for elastic bending of reissner plates

I.GeneralAnalyticSolutionforThickRectangularPlates1.1BasicequationsandboundaryconditionsTheoryofthewidelyusedReissuerplatesisquiteaccurateforengineeringcomputationand,asisshowninFig.l,ithasthefollowingassumDtionsfa)AthickrectangularplatewithmaterialpropertiesofelasticmodulusE,Poisson'sratiop,shearmodulusGanddimensionsofainlength,binw.idth.hinheightisconsiderd.anditsstrainsandstressescanbedescribledinthedeflectionofthemid-planeWandrotationsaroundx-axisandJ.-axisAandac,respectively.b)Thepl…     

Boundary element analysis for bending elastic plates with three generalized displacements

In this paper, the two fundamental differential equations for bending elastic plates with three generalized displacements are transformed into a set of boundary integral equations by Green formula. Three kinds of boundary conditions on edges have been strictly derived. So this paper gives a satisfactory method of boundary element analysis for solving the problem of bending elastic plates.     

求解弹性力学问题的有理单元法

传统的位移有限元法采用多项式形式的位移试函数,对于边数大于4的多边形单元,构造满足单元间协调性要求的多项式形式位移插值函数是一件困难的工作。本文利用逆距离权插值的思想并考虑到单元节点的分布,建立了边数大于4多边形单元上的有理函数形式的形函数。利用有理试函数,采用Galerkin法推导出求解平面弹性力学问题的有理单元法。采用有理单元法求解弹性力学问题,求解区域根据需要可以划分为任意多边形单元,极大地提高了网格划分的灵活性。有理单元法不依赖等参变换,不同单元的形函数表达形式统一,方便计算程序的编写。     

Boundary element method for orthotropic thick plates

The fundamental solutions of the orthotropic thick plates taking into account the transverse shear deformation are derived by means of Hörmander's operator method and a plane-wave decomposition of the Dirac δ-function in this papey. The boundary integral equations of the thick plates have been formulated which are adapted to arbitrary boundary conditions and plane forms. The numerical calculation of the fundamental solutions is discussed in detail. Some numerical examples are analyzed with BEM.     

AN EXACT METHOD OF BENDING OF ELASTIC THIN PLATES WITH ARBITRARY SHAPE

ＡＮ　ＥＸＡＣＴ　ＭＥＴＨＯＤ　ＯＦ　ＢＥＮＤＩＮＧ　ＯＦ　ＥＬＡＳＴＩＣ　ＴＨＩＮ　ＰＬＡＴＥＳ　ＷＩＴＨ　ＡＲＢＩＴＲＡＲＹ　ＳＨＡＰＥＺｈｏｕＤｉｎｇ（周叮）（ＲｅｃｅｉｖｅｄＡｐｒｉｌ１０，１９９５，ＲｅｖｉｓｅｄＡｐｒｉｌ２６．１９９６．Ｃ...     

Shear deformable bending solutions for nonuniform beams and plates with elastic end restraints from classical solutions

Summary The relationships of bending solutions between Timoshenko beams and Euler-Bernoulli beams are derived for uniform and non-uniform beams with elastic rotationally restrained ends. Extensions of these relationships for the cylindrical bending of Mindlin and Kirchhoff plates and for the bending of symmetrically laminated beams are also discussed. The new set of general relationships is useful because the more complex Timoshenko beam and Mindlin plate solutions may be readily obtained from their simpler Euler-Bernoulli beam and Kirchhoff plate solutions respectively, without much tedious mathematics. Received 16 March 1997; accepted for publication 26 November 1997     

An exact element method for bending of nonhomogeneous thin plates

In this paper, based on the step reduction method, a new method, the exact element method for constructing finite element, is presented. Since the new method doesn't need the variational principle, it can be applied to solve non-positive and positive definite partial differential equations with arbitrary variable coefficient. By this method, a triangle noncompatible element with 6 degrees of freedom is derived to solve the bending of nonhomogeneous plate. The convergence of displacements and stress resultants which have satisfactory numerical precision is proved. Numerical examples are given at the end of this paper, which indicate satisfactory results of stress resultants and displacements can be obtained by the present method.     

Reissner板问题的有限元广义混合法

用一般弹性体的广义混合变分原理,导出了适合Ｒｅｉｓｓｎｅｒ板弯曲问题的广义混合变分原理及其有限元广义混合法。算例说明,该有限元模式的刚度可以改变,比常规位移法的精度高,同时还能克服常规Ｒｅｉｓｓｎｅｒ板位移元用于计算薄板时所出现的“剪切自锁”现象,计算结果稳定,最后分析该法能够克服“剪切自锁”现象的原因。     

A finite difference method at arbitrary meshes for the bending of plates with variable thickness

A finite difference method at arbitrary meshes for the bending of plates with variable thickness is presented in this paper.The method is completely general with respect to various boundary conditions,load cases and shapes of plates.This difference scheme is simple and the numerical results agree well with those obtained by other methods.     

Reciprocal theorem method for solving the problems of bending of thick rectangular plates

ＲＥＣＩＰＲＯＣＡＬＴＨＥＯＲＥＭＭＥＴＨＯＤＦＯＲＳＯＬＶＩＮＧＴＨＥＰＲＯＢＬＥＭＳＯＦＢＥＮＤＩＮＧＯＦＴＨＩＣＫＲＥＣＴＡＮＧＵＬＡＲＰＬＡＴＥＳＦｕＢａｏ－ｌｉａｎ（付宝连）Ｔａｎｗｅｎ－ｆｅｎｇ（谭文锋）（ＹａｎｓｈａｎＵｎｉｒｅｒｓｉｔ...     

板壳畸变单元的无网格和有限元自动耦合方法

板壳大变形时单元的严重畸变会使计算精度降低。无网格局部Petrov-Galerkin法是一种真正的无网格方法,能够消除网格畸变,但比有限元法计算效率低。根据板壳网格畸变的局部性特点,利用过渡单元法,基于板壳网格质量,建立了板壳的网格严重畸变区域由有限元分析切换为无网格分析的自动耦合算法,实现了有限元法和无网格局部彼得罗夫．迦辽金法的耦合。应用实例表明：通过自适应耦合,既能发挥有限元法计算效率高的特点,又能发挥无网格法适合大变形分析、没有网格畸变造成计算困难的特点。     

P-version hybrid analytical finite element method for plate bending problems

Two sets of trial functions with different variables are constructed for the admissible space of the finite element analysis. The trial functions satisfy the equilibrium differential equation inside elements, while the deflections and rotations on the edges of the elements are approximated by the Peano hierarchical interpolation functions. Then, a generalized variational principle is applied to set up the p-version hybrid analytical finite element method for plate bending problems. The accuracy of finite element computation can be improved by increasing the order of the interpolation polynomials with fixed mesh. In the finite element formulation, to obtain the stiffness matrices and the load vectors, it is only necessary to perform quadrature over the edges of the elements. These matrices and vectors possess an embedding structure. The conformability between the elements can be controlled automatically.This work is supported by the Natural Science Foundation of China and the Aeronautical Science Foundation of China.     

求解不连续中厚板自由振动的微分容积单元法

基于区域叠加原理和微分容积法,发展了一种新型的数值方法——微分容积单元法,用以分析具有不连续几何特征的中厚板的自由振动。根据板的不连续情况将其划分为若干单元,在每个单元内用微分容积法将控制微分方程离散成为一组线性代数方程．在相邻的单元连接处应用位移连续条件和平衡条件,引入边界约束条件后得到一套关于各配点位移的齐次线性代数方程,由此可导出求解系统固有频率的特征方程。本文用子空间迭代法求解特征方程,并以开孔板、混合边界条件板和突变厚度板为例研究了方法的收敛性和计算精度。     

复合材料层合板的摄动随机Cell-Based光滑有限元

随机性是实际工程结构的固有特性,如何更真实地描述含随机参数结构的随机响应及统计特性,对工程结构的可靠性设计具有非常重要的意义。本文基于Cell-Based光滑有限元,采用四边形单元,推导了基于一阶剪切变形理论的复合材料层合板的光滑有限元公式,降低了网格划分要求,适应不规则网格,并采用离散剪切间隙有效地消除了剪切自锁;结合摄动法和随机场理论,导出了复合材料层合板的摄动随机光滑有限元平衡方程,并给出了结构随机响应数字特征的计算公式,求解了材料属性含随机性的复合材料层合板的随机响应问题,数值算例结果表明了本方法的有效性和准确性。     

中厚板统计分析的随机边界元法

本文建立了分析含随机材料参数并具厚度不均匀性的中厚板问题的随机边界元法,基于Taylor级数展开技术,分析和到广义位移的均值和一阶偏差的积分方程,其中将材料参数的随机性和厚度的不均匀性作为等效荷载处理,从而得到广义边界位移或面力的均值和协方差,并进一步求出部点广义位移和内力的均值和协方差,最后用本文方法计算了两个数例,并对所得结果进行了分析,探讨。     

Elasticity solutions for functionally graded plates in cylindrical bending

The plate theory of functionally graded materials suggested by Mian and Spencer is extended to analyze the cylindrical bending problem of a functionally graded rectangular plate subject to uniform load. The expansion formula for displacements is adopted. While keeping the assumption that the material parameters can vary along the thickness direction in an arbitrary fashion, this paper considers orthotropic materials rather than isotropic materials. In addition, the traction-free condition on the top surface is replaced with the condition of uniform load applied on the top surface. The plate theory for the particular case Of cylindrical bending is presented by considering an infinite extent in the y-direction. Effects of boundary conditions and material inhomogeneity on the static response of functionally graded plates are investigated through a numerical example.     

Vibration reduction of floating elastic plates in surface waves

Based on dynamical theories of water waves and dynamics of Mindlin thick plates,the investigation of the wave-induced responses and the vibration reduction of an elastic floating plate are presented using the Wiener-Hopf technique.Without regard to the case of elastic connector,the calculated results obtained by the present method are in good agreement with those from the literature and the experiment.It can be shown that the present method is valid.Relations between the spring stiffness to be used to connect the sea bottom and the floating plate and the parameters of wave-induced responses of floating plates are investigated using the present method.Therefore, these results can be used as theoretical bases for the design stage of super floating platform systems.     

AN EXACT ELEMENT METHOD FOR THE BENDING OF NONHOMOGENEOUS REISSNER’S PLATE

In this paper,based on the step reduction method and exact analytic method,a new method,the exact element method for constructing finite element,is presented.Since the new method doesn’t need variational principle,it can be applied to solve non-positive and positive definite partial differential equations with arbitrary variable coefficients.By this method,a triangle noncompatible element with15 degrees of freedom is derived to solve the bending of nonhomogenous Reissner’s plate.Because the displacement parameters at the nodal point only contain deflection and rotation angle.it is convenient to deal with arbitrary boundary conditions.In this paper,the convergence of displacement and stress resultants is proved.The element obtained by the present method can be used for thin and thick plates as well,Four numerical examples are given at the end of this paper,which indicates that we can obtain satisfactory results and have higher numerical precision.     

基于厚板理论分析深水域中弹性浮板的水波响应

基于线性水波理论和Mindlin厚板动力学理论,采用Wiener-Hopf 方法,研究了不同水深水面上弹性浮板在不同入射波数水波作用下的动力学响应问题。首先推导了无限深水域中弹性浮板水波响应的解析解,并将本文分析计算结果与采用其他方法(经典薄板理论)得到的计算结果进行了对比和分析;其次,采用本文方法研究了大型浮板在三种入射波数的水波作用下动弯矩幅值的分布情况;最后,根据其他文献的方法计算了不同水深(有限水深)情况下浮板的动响应,并与本文的计算结果进行了对比分析。     

金属板条在圆柱形模中弯曲成形的大变形有限元分析

本文采用大变形弹塑性有限元法对金属板条在柱形模中的压弯成形过程进行了数值模拟,并与实验进行了比较。首先给出了纠正的拉格朗日有限元公式和基于弹塑性乘法分解的超弹性塑性本构关系。对接触摩擦问题的处理采用了罚函数法。通过对数值结果的分析得出了一些对弯曲工艺的设计有指导价值的结论。