Reductive Deoxygenation of Carbonyl to Methylene

The reductive deoxygenation of aldehydes and ketones into the corresponding alkanes is accomplished by LiAlH4, in the presence of Lewis acid InBr3. It provides a convenient method to complete the transformation from carbonyl compounds to alkanes.     

Studies on the Physical Properties of Alkanes Using Edge-adjacency Information Topological Index

Edge-adjacency index and information topological index for 82 molecules of alkanes nave been constructed and calculated. The topological indices were used to correlate with seven physical properties of the alkanes. Some empirical equations were obtained through regression. The regression and calculation results show a good agreement of the topological indices and the properties.     

An Electrostatic Bond Energy Model for Enthalpies of Formation of Chloroalkanes in Gaseous States

An electrostatic bond energy model is formulated to fit the enthalpies of formation and dipole moments of the alkanes and chloroalkanes. In this model, the charge distributions are calculated by an electrostatic approach similar to the "MSE" method, and the enthalpy of formation of a molecule is the sum of the bond energy terms plus the electrostatic energy of the interactions between the charges on all atoms. All parameters of this model are obtained by parameterization. The calculated dipole moments for 13 chloroalkanes and enthalpies of formation for 19 alkanes and non-geminal chloroalkanes agree with the determined values very well. To calculate the enthalpies of formation of geminal chloroalkanes, a correction mainly attributed to the van der Waals interactions in the geminal substituted group, about 24 kJ/mol per pair of geminal chlorine atoms, is introduced.     

Iron-mediated cross dehydrogenative coupling (CDC) of terminal alkynes with benzylic ethers and alkanes

Iron-mediated sp-sp3 C-C bond formation through the cross dehydrogenative coupling(CDC) of terminal alkynes with benzylic ethers or alkanes has been developed.The inexpensive iron salt is used as the catalyst to make this transformation environmentally benign.Iron-mediated sp-sp3 C-C bond formation through the cross dehydrogenative coupling(CDC) of terminal alkynes with benzylic ethers or alkanes has been developed.The inexpensive iron salt is used as the catalyst to make this transformation environmentally benign.     

Investigation of carbon-13 nuclear magnetic resonance spectra-structure correlation based on novel atomic distance-edge (ADE) vector

A set of novel graph-theoretical parameters,called the atomic distance-edge (ADE) vector,was developed.Based on the connecting C-C bond number between central carbon atom and the other ones,various carbon atoms of alkanes were classified as four types,i.e.,type 1,2,3 and 4 for primary,secondary,ternary and quaternary carbon,respectively; and then four regression equations were obtained to link carbon-13 chemical shift (CS) of each type of atoms.Furthermore,these regression models were used to predict the carbon-13 nuclear magnetic resonance spectra of alkanes and it was found that the estimated CS were in agreement with the experimental results.     

Pyridinium tribromide catalyzed condensation of indoles and aldehydes to form bisindolylalkanes

An efficient synthetic method for bis(indol-3-yl)alkane derivatives has been developed.In the presence of 5 mol%of pyridinium tribromide(PTB),the condensation of indoles and aldehydes proceeded smoothly under mild conditions,giving rise to the corresponding bis(indol-3-yl)alkanes in good to excellent yields.     

Recent Results on Fast Flow Gas-Phase Partial Oxidation of Lower Alkanes

Recent experimental results and kinetic modeling of fast flow gas-phase oxidation of methane and other lower alkanes to methanol and other oxygenates are discussed,alongside with prospects and possible areas for applications of the processes.     

Product distributions of Fischer-Tropsch synthesis over Co/AC catalyst

The product distributions of Fischer-Tropsch synthesis over Co/AC catalyst are investigated under different reaction conditions in an integral fixed bed reactor.It is found that the product distributions deviate from the ASF distribution.The deviation from ASF distribution is analyzed by taking the readsorption of alkenes and the following secondary reaction into consideration.It is noted that the contents of alcohol,alkene and alkane decline with the increasing carbon number,showing a slighter declining tendency of alkanes than those of alkenes and alcohols.It is also found that high temperature,space velocity,H2/CO in feed gas and low pressure are preferential for light hydrocarbons and alcohols while against the chain propagation.The effect of space velocity on the product distributions especially on the light products is not obvious.It is noticed that low temperature,space velocity,H2/CO and high pressure lead to high contents of alcohols;high temperature,H2/CO and low space velocity lead to high contents of alkanes.The effect of pressure on the amounts of alkanes is not significant;high space velocity and low temperature,pressure,H2/CO are preferential for alkenes.     

Chemometrics to chemical modeling: novel molecular distance-edge vector (λ) in alkanes and retention index of gas chromatography

Systematic studies are made on application of chemometrics to chemical modeling and/or molecular modeling as well as the regularity of retention index for gas chromatography (GC). A set of novel molecular graph theoretical parameters, called the molecular distance-edge (MDE) vector (λ), is proposed and found to be excellently correlated to retention index of GC for alkanes. The MDE parameters were tested by the multiple linear regression (MLR) estimation and prediction of the retention index of GC, and the results obtained are satisfactory.     

Heterogeneous catalytic partial oxidation of lower alkanes(C_1–C_6) on mixed metal oxides

This review paper aims at analysing the state of the art for partial oxidation and oxidative dehydrogenation(ODH) reactions of lower alkanes C_1–C_6into olefins and oxygenated products(aldehydes, anhydrides,carboxylic acids) on metal oxide catalysts with cations of variable oxidation state, such as Mo and V in particular. Key parameters to be met by the catalysts, such as their redox properties, their structural aspects, active sites composed of ensembles of atoms isolated one from the others, mechanisms of reactions, are discussed. Main features of the different reactions of C_1–C_6alkanes and catalysts are analysed and their generalisation for determining more active and more selective catalysts is attempted. Prospective views for the future of the domain are proposed.     

取代烷烃极性交替规律的进一步探讨

运用 Ｇ９４Ｗ量子化学程序包,在 ＨＦ／６－３１＋ Ｇ基组和全几何优化的水平上,对一系列烷烃及其取代烷烃分子进行从头计算．通过比较母体烷烃及取代烷烃中原子的电荷,进一步证实并具体阐述取代烷烃有如共轭体系那样也存在极性交替规律．并着重提出了诱导极性有向叠加的观点,探讨其在定性分析键型相同的同分异构体稳定性等方面的应用．     

Density functional steric analysis of linear and branched alkanes

Branched alkane hydrocarbons are thermodynamically more stable than straight-chain linear alkanes. This thermodynamic stability is also manifest in alkane bond separation energies. To understand the physical differences between branched and linear alkanes, we have utilized a novel density functional theory (DFT) definition of steric energy based on the Weiz?cker kinetic energy. Using the M06-2X functional, the total DFT energy was partitioned into a steric energy term (E(s)[ρ]), an electrostatic energy term (E(e)[ρ]), and a fermionic quantum energy term (E(q)[ρ]). This analysis revealed that branched alkanes have less (destabilizing) DFT steric energy than linear alkanes. The lower steric energy of branched alkanes is mitigated by an equal and opposite quantum energy term that contains the Pauli component of the kinetic energy and exchange-correlation energy. Because the steric and quantum energy terms cancel, this leaves the electrostatic energy term that favors alkane branching. Electrostatic effects, combined with correlation energy, explains why branched alkanes are more stable than linear alkanes.     

Activated aluminum oxide selectively retaining long chain n-alkanes. Part I, description of the retention properties

Aluminum oxide activated by heating to 350-400 °C retains n-alkanes with more than about 20 carbon atoms, whereas iso-alkanes largely pass the column non-retained. Retention of n-alkanes is strong with n-pentane or n-hexane as mobile phase, but weak or negligible with cyclohexane or iso-octane. It is strongly reduced with increasing column temperature. Even small amounts of polar components, such as modifiers or impurities in the mobile phase, cause the retention of n-alkanes to irreversibly collapse. Since n-alkanes are not more polar than iso-alkanes and long chain n-alkanes not more polar than those of shorter chains, retention by a mechanism based on steric properties is assumed. The sensitivity to deactivation by polar components indicates that polar components and n-alkanes are retained by the same sites. The capacity for retaining n-alkanes is low, with the effect that the retention of n-alkanes depends on the load with retained paraffins. These retention properties are useful for the pre-separation of hydrocarbons in the context of the analysis of mineral oil paraffins in foodstuffs and tissue, where plant n-alkanes, typically ranging from C₂₃ to C₃₃, may severely disturb the analysis (subject of Part II).     

Chain length dependence of the thermodynamic properties of linear and cyclic alkanes and polymers

The specific heat capacity was measured with step-scan differential scanning calorimetry for linear alkanes from pentane (C(5)H(12)) to nonadecane (C(19)H(40)), for several cyclic alkanes, for linear and cyclic polyethylenes, and for a linear and a cyclic polystyrene. For the linear alkanes, the specific heat capacity in the equilibrium liquid state decreases as chain length increases; above a carbon number N of 10 (decane) the specific heat asymptotes to a constant value. For the cyclic alkanes, the heat capacity in the equilibrium liquid state is lower than that of the corresponding linear chains and increases with increasing chain length. At high enough molecular weights, the heat capacities of cyclic and linear molecules are expected to be equal, and this is found to be the case for the polyethylenes and polystyrenes studied. In addition, the thermal properties of the solid-liquid and the solid-solid transitions are examined for the linear and cyclic alkanes; solid-solid transitions are observed only in the odd-numbered alkanes. The thermal expansion coefficients and the specific volumes of the linear and cyclic alkanes are also calculated from literature data and compared with the trends in the specific heats.     

Intrinsic carbon-13 NMR solvent shifts in hydrocarbons. Relevance of long range substituent parameters

Carbon-13 NMR chemical shifts have been measured in a number of binary mixtures of normal alkanes. Intrinsic solvent shifts are deduced from the shifts and the relevance of some small substituent effects in alkanes is discussed. A comparison is made between solvent effects and thermally induced chemical shift differences in alkanes.     

Use of alkane monolayer templates to modify the structure of alkyl ether monolayers on highly ordered pyrolytic graphite

Scanning tunneling microscopy (STM) has been used to investigate the structure of pure and mixed monolayers formed by adsorption of long-chain alkanes and/or ethers on highly ordered pyrolytic graphite. Application of a pure phenyloctane solution of simple alkanes, such as tritriacontane, CH3(CH2)31CH3, produced a monolayer within which the individual molecular axes were oriented perpendicular to the lamellar axes. In contrast, a pure solution of symmetrical long-chain ethers, such as di-n-hexadecyl ether, CH3(CH2)15O(CH2)15CH3, produced a monolayer within which the molecular axes were oriented at an angle of approximately 65 degrees relative to the lamellar axes. The compositions of the overlying solutions were then gradually changed either from pure alkanes to nearly pure ethers or from pure ethers to nearly pure alkanes. When ethers replaced alkanes in the monolayer, the ethers conformed to the orientation within the existing alkane layer, rather than adopting the characteristic orientation of pure ether monolayers. However, when alkanes were incorporated into monolayers that had been formed from pure ether solutions, the orientation of the molecules within the monolayer converted to that characteristic of pure alkanes. Alkane monolayers thus acted as templates for subsequent ether layers, but ether monolayers did not act as templates for alkane layers.     

Effect of pressure on the oxidative cracking of C<Subscript>2</Subscript>—C<Subscript>4</Subscript> alkanes

The influence of pressure on the oxidative cracking of light alkanes C₂—C₄ was investigated. An elevated pressure reduces the temperature of oxycracking of light alkanes but with further increase in pressure the effect is reduced. The applied pressure decreases the temperature of the total conversion of oxygen while the maximum conversion of alkanes is not influenced. The pressure above atmospheric promotes oxidative cracking reactions but weakly affects thermal processes. At deep conversion of light alkanes, the selectivity towards main products is nearly invariable at the utilized pressures.     

Liquid Chromatographic Separation of Olefin Oligomers and its Relation to Separation of Polyolefins – an Overview

Summary: Linear and branched alkanes are oligomers of polyethylene. Alkanes with higher molar masses are called waxes. These substances are widely used as fuels, oils, lubricants, etc. and for these reasons many groups have tried to analyse, separate and characterise alkanes by various methods, including liquid chromatography. Alkanes may be separated according to their size in solution by SEC. In addition to chromatographic systems separating in the SEC mode, various sorbent-solvent systems have been published, where alkanes have been separated one from another by adsorption and/or precipitation mechanism. The mobile phase is either a non-polar solvent or a polar solvent or a mixture of a solvent and a non-solvent for alkanes. Even near critical conditions, which have several advantages for applications of HPLC in polymer analysis, have been identified for alkanes. Moreover, selective separations of branched alkanes according to their structure have been published. In the majority of these published studies, solvents with low boiling points have been used as the mobile phases, which do not allow dissolution of crystalline polyolefins at atmospheric pressure. However, taking into account experiences with the separation of alkanes, new HPLC systems for the separation of polyolefins may be developed. This is a major challenge and first results are presented in this contribution.     

Alkane lengths determine encapsulation rates and equilibria

A cylindrical capsule provides an environment for straight-chain alkanes that can properly fill the space through extended or compressed conformations. The encapsulation rates of a series of alkanes were examined and found to be dependent on guest length: the rates of uptake are C(9) > C(10) > C(11), while complex stability is in the reverse order, C(11) > C(10) > C(9). Direct competition experiments, pairwise or between all 3 alkanes, maintain this order as the longer alkanes sequentially displace the shorter ones. The distribution of species with time provides a clock for this complex system, which combines elements of self-sorting phenomena and dynamic combinatorial chemistry. The clock can be stopped by replacing the alkanes with the superior guest 4,4'-dimethylazobenzene, then restarted by irradiation.     

工业混合烷中含硫化合物的鉴定

建立了一种工业混合烷中含硫化合物的新的定性鉴定方法。样品经过氢氧化钾和硝酸银预处理后,可将工业混合烷中含硫化合物的硫醇、硫醚和噻吩进行分离,而后用GC-MS测定,鉴定了工业混合烷中30种硫醚和5种硫醇化合物。