Stacking of 2,3,5-triphenyl-2H-tetrazolium chloride onto polyelectrolytes containing 4-styrenesulfonate groups

Possible structural aspects are discussed that justify the different resistance to reduction of 2,3,5-triphenyl-2 H-tetrazolium chloride (TTC) both chemically (by reaction with ascorbic acid (ASC)) and electrochemically, in the presence of different polyelectrolytes such as poly(sodium 4-styrenesulfonate) (PSS), poly(sodium 4-styrenesulfonate- co-sodium maleate) at two different comonomer compositions (P(SS 1- co-MA 1) and P(SS 3- co-MA 1)), and poly(sodium acrylate- co-sodium maleate) (P(AA 1- co-MA 1)). Different dissociation constants are found for the complexes between TTC and the different polyelectrolytes by diafiltration (DF). Related to this, spectroscopical differences are also found by (1)H NMR and UV-vis spectroscopies. Dynamic light scattering (DLS) showed a higher tendency to undergo intermolecular aggregation for P(SS 1- co-MA 1) in the presence of TTC, a result that could be related with a higher tendency for TTC to form hydrophobic ion pairs as a consequence of single stacking with the benzene sulfonate groups (BS) of this polyelectrolyte. On the other hand, the lower tendency for PSS to undergo intermolecular aggregation could be attributable to a higher probability to form more hydrophilic adducts by means of double stacking with TTC.     

Reduction of 2,3,5-triphenyl-2H-tetrazolium chloride in the presence of polyelectrolytes containing 4-styrenesulfonate moieties

The redox behavior of 2,3,5-triphenyl-2H-tetrazolium chloride (TTC) in the presence of different polyelectrolytes such as poly(sodium 4-styrenesulfonate) (PSS), poly(sodium 4-styrenesulfonate-co-sodium maleate) at two different comonomer compositions (P(SS(1)-co-MA(1)) and P(SS(3)-co-MA(1))), poly(sodium acrylate-co-sodium maleate) (P(AA(1)-co-MA(1))), and poly(sodium acrylate) (PAA) is studied. Due to aromatic-aromatic interactions, the polyelectrolytes containing benzene sulfonate groups produce a decrease on the reduction rate of TTC in the presence of ascorbic acid (ASC) and a shift of the anodic and cathodic peaks to higher negative potentials for the electrochemical reaction of TTC. As an important conclusion, these effects are a function of the linear aromatic density of the polyelectrolytes.     

Interactions of quaternary ammonium salt-type gemini surfactants with sodium poly(styrene sulfonate)

The interactions of cationic gemini surfactants, 1,2-bis(alkyldimethylammonio)ethane dibromide (m-2-m: m is hydrocarbon chain length, m = 10 and 12), and an anionic polymer, sodium poly(styrene sulfonate) (PSS), have been characterized by several techniques such as tensiometry, fluorescence spectroscopy, and dynamic light scattering. The surface tension of gemini surfactant/PSS mixed systems decreases with surfactant concentration, reaching break points, which are taken as critical aggregation concentrations (cac). The surface tension at the cac of mixtures is higher than that of single surfactants, and it is found that at concentrations above the cac, the surfactant molecules are associated with the polymer in the bulk. The 12-2-12/PSS mixed system shows higher surface activity than both 10-2-10/PSS and the monomeric surfactant of dodecyltrimethylammonium bromide/PSS systems. Fluorescence measurements of these mixed systems suggest the formation of a complex with a highly hydrophobic environment in the bulk of the solution. Additionally, dynamic light scattering measurements show that the hydrodynamic diameter of the 12-2-12/PSS mixed system is smaller than that of PSS only at low concentration, indicating interactions between surfactant and polymer. These result from the electrostatic attraction between ammonium and sulfate headgroups as well as the hydrophobic interaction between their hydrocarbon chains.     

A FLUORESCENCE STUDY OF THE INTERACTION OF INDOLIC COMPOUNDS WITH SYNTHETIC POLYELECTROLYTES

Abstract— –The interaction of indole derivatives with synthetic polyelectrolytes was investigated using UV absorption and fluorescence spectroscopy. The presence of both sodium poly(styrene sulfonate) (PSS) and sodium polyvinyl sulfonate) (PVS) inhibits the fluorescence quenching of 1-pyrene sulfonic acid by tryptamine. The effect is more marked for PSS than for PVS. There was no polyelectrolyte effect on the quenching by tryptophan. It was also found that aromatic polyelectrolytes strongly quench the fluorescence of indole derivatives of opposite charge by a static mechanism. This is accompanied by a new absorption in the red extreme of the UV spectrum of the mixtures. The systems investigated were tryptamine-PSS and polyvinyl benzyl trimethylammonium chloride) with the anions of indole-3-alkanoic acids. Equilibrium constants for the binding of the indole derivatives to the polyelectrolytes were determined. The fluorescence of zwitterionic tryptophan is not affected by the presence of the polyelectrolytes.     

Control of the surface charges of Au-Ag nanorods: selective detection of iron in the presence of poly(sodium 4-styrenesulfonate)

In this article, we report a simple approach for selectively sensing Fe2+ ions using CTAB-stabilized Au-Ag nanorods (CTAB-Au-Ag NRs) in the presence of poly(sodium 4-styrenesulfonate) (PSS). The prepared CTAB-Au-Ag NRs exhibit an intense longitudinal surface plasmon resonance absorption (>10(9) M(-1) cm(-1) at 827 nm) in the near-infrared region. As a result of attractive electrostatic interactions between PSS and CTAB, agglomeration of the CTAB-Au-Ag NRs induces a change in the absorption at 827 nm. From zeta potential measurements, we found that the degree of agglomeration was highly dependent on the surface charge density of the CTAB-Au-Ag NRs. Because Fe2+ (Fe3+) ions selectively interact with PSS, the degree of agglomeration-and, thus, the change in absorption at 827 nm-is dependent on the concentration of Fe2+ (Fe3+) ions. To improve the selectivity of the present sensing system, Fe3+ ions were reduced to Fe2+ ions in the presence of ascorbic acid prior to analysis. The concentrations of CTAB-Au-Ag NRs and PSS are both important parameters in determining the sensitivity and selectivity of the present approach toward sensing Fe2+ ions. Under the optimum conditions [34 pM CTAB-Au-Ag NRs, (5 x 10(-6))% PSS, pH 7.2], the limit of detection for Fe2+ ions at a signal-to-noise ratio of 3 was 1.0 microM. We applied this nanosensor system to the determination of Fe2+ in ferritin and in aqueous environmental samples; this approach has the advantages of simplicity, accuracy, and precision (the relative standard deviation from five runs with each sample was below 3%).     

Adsorption of lysozyme and α-lactalbumin on poly(styrenesulphonate) latices 2. Proton titrations

A study on the titration behaviour of hen's egg lysozyme (LSZ) and milk α-lactalbumin (LAC) is presented. Titration curves for the proteins in their native state, after exposure to denaturing agents, and adsorbed on poly(styrenesulphonate) (PSS) latices are compared. Titrations of the proteins in the presence of guanidinium hydrochloride and sodium dodecyl sulphate (SDS) show that electrostatic interactions, more than alterations in the chemical environment, affect the dissociation of the charged groups on the protein molecule. The titration of adsorbed (apo)-LAC is similar to that of the SDS-denatured state, independent of the surface coverage. The titration of LSZ depends on the degree of coverage, suggesting different modes of adsorption. The two conformers of LAC, i.e. apo-LAC and Ca-LAC, are compared to test the influence of the structural stability of the protein on the titration behaviour. In solution, the two conformers of LAC titrate differently, but after adsorption on to a PSS latex surface the titration behaviour is practically the same. This points to a similar adsorbed state, with expulsion of the Ca²⁺ ion from the Ca-containing form.     

Single microgel particle studies demonstrate the influence of hydrophobic interactions between charged micelles and oppositely charged polyions

The binding of two cationic surfactants, dodecyltrimethylammonium bromide (DoTAB) and N-(1,1,2,2-tetrahydroperfluorodecanyl)pyridinium bromide (HFDePB), to covalently cross-linked sodium poly(styrenesulfonate) (PSS) microgels has been investigated by means of micromanipulator-assisted time-resolved light microscopy on single gels. It is demonstrated that repeated measurements on the same microgel under conditions of controlled liquid flow give highly reproducible results. The two surfactants are found to behave very differently with respect to degree of swelling, surfactant distribution in the gels, both during shrinking and at equilibrium, and kinetics of volume changes induced by them. The main difference is attributed to the presence of a hydrophobic interaction between PSS and the DoTAB micelles, absent in the case of HFDePB. Kinetic shrinking curves are recorded and analyzed using a model for steady-state transport of surfactant between the solution and the gels. Aggregation numbers for DoTAB in PSS solutions obtained from fluorescence quenching measurements are presented. A strong dependence on the surfactant-to-polyion concentration ratio is observed. Relations between surfactant binding isotherms, phase diagrams for linear polyelectrolyte/surfactant/water systems, and the binding to gels are discussed.     

Surface interactions during polyelectrolyte multilayer buildup. 1. Interactions and layer structure in dilute electrolyte solutions

We report the investigation of surface forces between polyelectrolyte multilayers of poly(allylamine hydrochloride) (PAH) and poly(styrenesulfonate sodium salt) (PSS) assembled on mica surfaces during film buildup using a surface force apparatus. Up to four polyelectrolyte layers were prepared on each surface ex situ, and the surface interactions were measured in 10(-4) M KBr solutions. The film thickness under high compressive loads (above 2000 microN/m) increased linearly with the number of deposited layers. In all cases, the interaction between identical surfaces at large separations (>100 A from contact) was dominated by electrostatic double-layer repulsion. By fitting DLVO theory to the experimental force curves, the apparent double-layer potential of the interacting surfaces was calculated. At shorter separations, an additional non-DLVO repulsion was present due to polyelectrolyte chains extending some distance from the surface into solution, thus generating an electrosteric type of repulsion. Forces between dissimilar multilayers (i.e., one of the multilayers terminated with PSS and the other with PAH) were attractive at large separations (30-400 A) owing to a combination of electrostatic attraction and polyelectrolyte bridging.     

Counterions and water in polyelectrolyte multilayers: a tale of two polycations

Attenuated total internal reflectance Fourier transform infrared, ATR-FTIR, spectroscopy was used to compare the water uptake and doping within polyelectrolyte multilayers made from poly(styrene sulfonate), PSS, and a polycation, either poly(allylamine hydrochloride), PAH, or poly(diallyldimethylammonium chloride), PDADMAC. Unlike PDADMA/PSS multilayers, whose water content depended on the solution ionic strength, PAH/PSS multilayers were resistant to doping by NaCl to a concentration of 1.2 M. Using (infrared active) perchlorate salt, the fraction of residual counterions in PDADMA/PSS and PAH/PSS was determined to be 3% and 6%, respectively. The free energy of association between the polymer segments, in the presence of NaClO4, was about 5 kJ mol-1 and -10 kJ mol-1, respectively, for PDADMA/PSS and PAH/PSS, indicating the relatively strong association between the polymer segments in the latter relative to the former. Varying the pH of the solution in contact with the PAH/PSS multilayer revealed a transition to a highly swollen state, interpreted to signal protonation of PAH under much more basic conditions than the pKa of the solution polymer. The increase in the multilayer pKa suggested an interaction energy for PAH/PSS in NaCl of ca. 16 kJ mol-1.     

Interaction between dyes and polyelectrolytes. XII. Excitation energy transfer between bound dyes

Methylene blue-photosensitized isomerization of cis-p-(phenylazo) phenyltrimethylammonium iodide to the transisomer was used advantageously to investigate the effect of polyanions on the triplet excitation energy trasfer between cationic dyes in aqueous media. The efficiency of the excitation energy transfer was improved by the addition of potassium poly(vinyl sulfate) (PVS), potassium poly(styrene-sulfonate) (PSS), sodium poly(acrylate) (PAA), and sodium poly(methacrylate) (PMA) and was dependent on the polyanion concentration in the system. PVS and PSS were much more effective than PAA and PMA. The efficiency of the excitation energy transfer under the most appropriate conditions was about 67 times higher than in the absence of polyanions. Correlation with dye binding to polyanions and the efficiency of the excitation energy transfer between dyes was discussed.     

PHOTOINDUCED ELECTRON TRANSFER QUENCHING OF EXCITED Ru(II) POLYPYRIDYLS BOUND TO DNA: THE ROLE OF THE NUCLEIC ACID DOUBLE HELIX

In the presence of double helical polynucleotides (sodium poly(dA-dT).poly(dA-dT) or calf thymus DNA), the efficiency of oxidative or reductive electron transfer between photoexcited ruthenium(II) chelates Ru(tap)2(hat)2+ or Ru(phen)2+(3) (where tap = 1,4,5,8-tetraazaphenanthrene, hat = 1,4,5,8,9,12-hexaazatriphenylene, and phen = 1,10-phenanthroline) and appropriate cationic quenchers (ethidium, Ru(NH3)3+(6), methyl viologen, or M(phen)3+(3), where M = Co, Rh, Cr) increases 1-2 orders of magnitude compared to the efficiency of the same quenching in microhomogeneous aqueous medium (kq = 0.3-1.8 x 10(9) M-1 s-1). The enhancement is more pronounced when the binding constant of the quencher (10(3) less than Kb less than 10(6) M-1) is large. Similar trends are found when the biopolymers are replaced by sodium poly(styrenesulfonate) (PSS). The accelerated electron transfer process is proposed to be due mainly to the effect of accumulation of the reagents in the electrostatic field of the polymer; if corrections for this effect are introduced (e.g. ratioing [quencher]/[polynucleotide]), the reaction rate becomes essentially independent of the polymer concentration. Based upon a model for electron transfer reaction of the complexes within a small cylindrical interface around the DNA helix, calculations of the bimolecular electron transfer rate constants are computed to be 10(3) times smaller when the reactants are bound to the double-stranded polynucleotides and decreased mobility of the cationic species is apparent. The effect is less pronounced if a simpler polyelectrolyte (PSS) is employed. Emission lifetimes of the Ru(II) polypyridyls bound to the DNA (0.32-2 microseconds, double exponential decays) are discussed as well.     

Poly(N-ethyl-4-vinylpyridinium) cation-zwitterionic surfactant complexes

The interaction between poly(N-ethyl-4-vinylpyridinium bromide) and a zwitterionic surfactant has been studied in the presence of a low-molecular-mass electrolyte, sodium bromide. Both soluble and insoluble complexes have been formed. There are two essential differences between interactions of the polycation with the zwitterionic surfactant and of polycations with anionic surfacants: interaction between the polycation and the zwitterionic surfactant may proceed only in the presence of low-molecular-mass electrolytes, while interaction between the polycation and the zwitterionic surfactant in the presence of sodium bromide may take place only at surfactant concentrations above the CMC.     

Oxidoreductase Catalyzed Polymerization of 3-Methylpyrrole

A one-pot, environmentally friendly enzymatic method is described for the synthesis a polypyrrole derivative, poly(3-methylpyrrole) (poly(3-MP)) in an aqueous solvent system. The enzyme, soybean peroxidase (SBP), was shown to successfully polymerize the beta functionalized pyrrole monomer. The resulting polymer was semiconducting, thermally stable, and exhibited bipolaron absorptions when synthesized in the presence of poly(sodium 4-styrenesulfonate) (PSS). Polymers synthesized in the presence of 10-camphor sulfonic acid (CSA) were found to exhibit slightly higher conductivity values, but were less thermally stable compared to poly(3-MP) polymerized in the presence of PSS. This work should stimulate further interest in expanding the use of enzymes as catalysts for the polymerization of other pyrrole derivatives, as well as other classes of conjugated polymers.     

Interactions of Water‐Soluble Poly(sodium 4‐styrenesulfonate) with Iminodiacetic Acid and Cu2+

The multicomponent system consisting of poly(sodium 4‐styrenesulfonate) (PSS), iminodiacetic acid (IDAA), and Cu(NO₃)₂ in water at pH 4 was studied by means of ultrafiltration at low and relatively high ionic strengths. Under the experimental conditions, IDAA is negatively charged, and is slightly retained in ultrafiltration experiments in the presence of the water‐soluble polyelectrolyte PSS. The positively charged copper ions are strongly retained by PSS. Due to the capability of IDAA to form stable complexes with Cu²⁺ ions, the resulting blue 1:1 complex between IDAA and Cu²⁺ is not retained by PSS, but is eluted from the ultrafiltration cell at pH 4.     

预混合自组装辣根过氧化物酶生物活性膜及其催化活性研究

以阳离子化的辣根过氧化物酶 (HRP)和阴离子聚苯乙烯磺酸钠 (PSS)的预混合溶液 ,与阳离子聚电解质聚二甲基二烯丙基氯化铵 (PDDA)通过逐层组装 ,在阴离子化聚对苯二酸乙二酯 (PET)表面构建了多层生物活性膜 .用紫外 可见光谱仪 (UV Vis)和原子力显微镜 (AFM)研究了交替自组装膜的结构和表面形膜 ,并测定了自组装膜的生物催化活性 .结果表明 ,预混合溶液中的PSS与HRP一起沉积在PDDA膜层上组装成 (PSS+HRP)膜层 ,且每层中PSS和HRP的比例一致 ;(PSS +HRP)膜层呈条状分布 ,膜表面较为平整 ;多层膜中的HRP催化H2 O2 与 4 氨基安替比林的显色反应的表观米氏常数为 9 7× 10 - 5mol·L- 1 (相对于H2 O2 底物 ) ,较溶液中 (1 5 2× 10 - 4mol·L- 1 )的小 .     

Understanding interactions between poly(styrene-co-sodium styrene sulfonate) and single-walled carbon nanotubes

Understanding formation mechanisms of hybrids of carbon nanotubes (CNTs) wrapped by polymers and their interactions is critical in modifying solubility of CNTs in aqueous solution and developing new nanotube-based polymer materials. In the present work, we investigate the structural details of poly(styrene-co-sodium styrene sulfonate) (PSS) wrapping around the CNT and the interactions between the PSS chain and the CNT using molecular dynamics (MD) simulations. The fraction of sulfonated groups significantly influences the wrapping conformations of the PSS chain. Due to limited time scale in the MD simulations, two different initial conformations of the chains are introduced to explore the effect of the initial state on the wrapping behavior. When the chains initially wrap around the CNT in a perfect helix manner, more compact pseudo-helical conformations are obtained. For initial straight line arrangement of the chain monomers, the chains adopt looser wrapping conformations. The free-energy analysis and binding interaction of the PSS chain on the CNT surface take a glance on the relationship between the conformational transition of the chain and the energy evolution.     

Thermoelectric properties of nanocomposite thin films prepared with poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) and graphene

Carbon nanotubes (CNTs), either single wall carbon nanotubes (SWNTs) or multiwall carbon nanotubes (MWNTs), can improve the thermoelectric properties of poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT?:?PSS), but it requires addition of 30-40 wt% CNTs. We report that the figure of merit (ZT) value of PEDOT?:?PSS thin film for thermoelectric property is increased about 10 times by incorporating 2 wt% of graphene. PEDOT?:?PSS thin films containing 1, 2, 3 wt% graphene are prepared by solution spin coating method. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy analyses identified the strong π-π interactions which facilitated the dispersion between graphene and PEDOT?:?PSS. The uniformly distributed graphene increased the interfacial area by 2-10 times as compared with CNT based on the same weight. The power factor and ZT value of PEDOT?:?PSS thin film containing 2 wt% graphene was 11.09 μW mK(-2) and 2.1 × 10(-2), respectively. This enhancement arises from the facilitated carrier transfer between PEDOT?:?PSS and graphene as well as the high electron mobility of graphene (200,000 cm(2) V(-1) s(-1)). Furthermore the porous structure of the thin film decreases the thermal conductivity resulting in a high ZT value, which is higher by 20% than that for a PEDOT?:?PSS thin film containing 35 wt% SWNTs.     

Binding studies of sodium dodecyl benzene sulphonate with poly(N-vinyl-2-pyrrolidone)

The binding of sodium dodecyl benzene sulphonate (SDBS) with poly(N-vinyl-2-pyrrolidone) (PVP) has been investigated at 303.15 and 313.15 K using equilibrium dialysis, surface tension, viscosity, ultrasound velocity and ultrasound absorption techniques. From each of these studies four distinct regions of SDBS-PVP interactions were observed. Interaction of SDBS with PVP was found to involve the binding of surfactant dimers with the polymer molecule followed by usual micellization. The binding data has been analyzed in terms of various models of polymer-surfactant interaction.     

STUDIES ON RELATION BETWEEN INTRINSIC VISCOSITY OF POLYELECTROLYTES IN SOLUTIONS USED FOR LAYER-BY-LAYER SELF-ASSEMBLY AND THEIR CORRESPONDING ADSORPTION AMOUNTS IN THE RESULTANT MULTILAYER MEMBRANES

The adsorption amount of poly(styrene sulfonate)and poly(dimethyldiallyl ammonium chloride)(PSS/PDDA) self-assembled multilayer membranes in designed dipping solvents were measured by UV-Vis-spectroscopy and quartz crystal microbalance(QCM).Intrinsic viscosities of PSS and PDDA in corresponding dipping solvents were determined by an Ubbelohde viscometer.It is found that the adsorption amount of PSS/PDDA self-assembled multilayer membranes built up in different dipping solutions,added salt concentration,p...     

Multilayer coating of gold nanoparticles with drug-polymer coadsorbates

The aim of our present study was the development of a drug multilayer-based carrier system for delivery of water-insoluble drugs. As drug, we applied the anticancer drug 5,10,15,20-tetrakis(3-hydroxyphenyl)porphyrin, mTHPP, which is a model photosensitizer for photodynamic therapy. Gold nanoparticles (AuNP) with a diameter of 14.5 ± 0.9 nm were prepared and used as template for the layer-by-layer approach. The drug and the negatively charged polyelectrolyte (PE) poly(styrene sulfonate) sodium salt (PSS) were complexed with a new developed method using freeze-drying. The complexation efficiency was determined to be ～11-12 monomers PSS per mTHPP molecule by CHNS analysis and UV/vis measurement. Molecular docking simulations revealed π-π interactions and H-bonding to be the responsible mechanisms. A drug multilayer system based on the layer-by-layer (LbL) technique utilized the water-soluble complex as anionic layer material and poly(allylamine hydrochloride) (PAH) as cationic layer. The modified AuNP were characterized by different physicochemical techniques such as UV/vis, ζ-potential, ICP-OES, and TEM. To the best of our knowledge, we could demonstrate for the first time the adsorption of three drug layers to a nanoparticulate system. Furthermore, the adaptation of the LbL-technique resulted in drastically increased drug deposition efficiency (factor of 100). Furthermore, we developed a new and comfortable way to solubilize water-insoluble drugs in water.