Metal phosphonates applied to biotechnologies: a novel approach to oligonucleotide microarrays

A new process for preparing oligonucleotide arrays is described that uses surface grafting chemistry which is fundamentally different from the electrostatic adsorption and organic covalent binding methods normally employed. Solid supports are modified with a mixed organic/inorganic zirconium phosphonate monolayer film providing a stable, well-defined interface. Oligonucleotide probes terminated with phosphate are spotted directly on to the zirconated surface forming a covalent linkage. Specific binding of terminal phosphate groups with minimal binding of the internal phosphate diesters has been demonstrated. The mixed organic/inorganic thin films have also been extended for use arraying DNA duplex probes, and therefore represent a viable general approach to DNA-based bioarrays. Ideas for interfacing mixed organic/inorganic interfaces to other bioapplications are also discussed.     

Novel phosphate–phosphonate hybrid nanomaterials applied to biology

A new process for preparing oligonucleotide arrays is described that uses surface grafting chemistry which is fundamentally different from the electrostatic adsorption and organic covalent binding methods normally employed. Solid supports are modified with a mixed organic/inorganic zirconium phosphonate monolayer film providing a stable, well-defined interface. Oligonucleotide probes terminated with phosphate are spotted directly to the zirconated surface forming a covalent linkage. Specific binding of terminal phosphate groups with minimal binding of the internal phosphate diesters has been demonstrated. On the other hand, the reaction of a bisphosphonate bone resorption inhibitor (Zoledronate) with calcium deficient apatites (CDAs) was studied as a potential route to local drug delivery systems active against bone resorption disorders. A simple mathematical model of the Zoledronate/CDA interaction was designed that correctly described the adsorption of Zoledronate onto CDAs. The resulting Zoledronate-loaded materials were found to release the drug in different phosphate-containing media, with a satisfactory agreement between experimental data and the values predicted from the model.     

A novel route for immobilization of oligonucleotides onto modified silica nanoparticles

A novel approach for immobilization of probe oligonucleotides that uses zirconium phosphate modified silica nanoparticles is proposed. The surface modification of nanoparticles was carried out in two stages. Initially binding of Zr4+ to the surface of silica nanoparticles and later treated with phosphoric acid for terminal phosphate groups. Oligonucleotide probes modified with amine group at 5'-end were strongly binds to the phosphate terminated silica nanoparticles with imidazole in presence of 0.1 mol L(-1) EDC [N-ethyl-N'-(3-dimethylaminopropyl) carbodiimide], as phosphate groups are more reactive towards amine group. Various studies, i.e., synthesis of silica nanoparticles, their surface modification, probe immobilization, measurement of hybridization and effect of bovine serum albumin (BSA) were carried out during optimization of reaction conditions. The significant reduction in the background signal was observed by treating the probe modified silica nanoparticles with bovine serum albumin prior to hybridization. The probe modified silica nanoparticles were retained their properties and the hybridization was induced by exposure of single-stranded DNA (ssDNA) containing silica nanoparticles to the complementary DNA in solution. The decrease in the fluorescence signal for one mismatch and three mismatch was observed upon hybridization of probe with target DNAs, while there was no response for the random target ssDNA under the same experimental conditions. The intensity of fluorescence signal was linear to the concentration of target DNA ranging from 3.9 x 10(-9) to 3.0 x 10(-6)mol L(-1). A detection limit of 1.22 x 10(-9) mol L(-1) of oligonucleotides can be estimated. The proposed hybridization assay is simple and possesses good analytical characteristics and it can provide an effective and efficient route in the development of DNA biosensors and biochips.     

Optimizing processing parameters for signal enhancement of oligonucleotide and protein arrays on ARChip Epoxy

Signal enhancement of oligonucleotide and protein arrays on ARChip Epoxy was achieved by optimizing chip processing parameters. The parameters investigated were fabrication, blocking and guide dot concentration, probe concentration and modification, print buffer, humidity during arraying, slide agitation, spot volume and spotter compatibility. The optimum oligonucleotide concentration was 20 microM, while the optimum protein concentration was 0.05 mg/ml. Amino-modified oligonucleotides were best able to be bound to the resin's epoxy groups at pH 8, whereas thiol-modified oligonucleotides displayed an optimum coupling value of pH 7. So as to avoid background (BG) contamination of probes around bright guide dots, the concentration of fluorescent guide dots was set to 1 muM. The most suitable print buffers for oligonucleotide arrays using both piezo- and contact-printing systems proved to be 3 x SSC/1.5 M betaine and commercial ArrayLink. When 0.01% monochlortriazinyl-beta-cyclodextrin sodium salt (MCT) was added, the hybridization signal doubled in strength as compared to plain buffer. The optimum print buffer for proteins was 0.1 N phosphate buffer, pH 8/10% glycerine. The optimum humidity for arraying oligonucleotides was 60% and for proteins 40%. Initially agitating slides for 15 min was found just as effective as agitating slides over the total hybridization period (2.5 h), and this resulted in a three times stronger signal.     

Nucleic acid-based fluorescent probes and their analytical potential

It is well known that nucleic acids play an essential role in living organisms because they store and transmit genetic information and use that information to direct the synthesis of proteins. However, less is known about the ability of nucleic acids to bind specific ligands and the application of oligonucleotides as molecular probes or biosensors. Oligonucleotide probes are single-stranded nucleic acid fragments that can be tailored to have high specificity and affinity for different targets including nucleic acids, proteins, small molecules, and ions. One can divide oligonucleotide-based probes into two main categories: hybridization probes that are based on the formation of complementary base-pairs, and aptamer probes that exploit selective recognition of nonnucleic acid analytes and may be compared with immunosensors. Design and construction of hybridization and aptamer probes are similar. Typically, oligonucleotide (DNA, RNA) with predefined base sequence and length is modified by covalent attachment of reporter groups (one or more fluorophores in fluorescence-based probes). The fluorescent labels act as transducers that transform biorecognition (hybridization, ligand binding) into a fluorescence signal. Fluorescent labels have several advantages, for example high sensitivity and multiple transduction approaches (fluorescence quenching or enhancement, fluorescence anisotropy, fluorescence lifetime, fluorescence resonance energy transfer (FRET), and excimer-monomer light switching). These multiple signaling options combined with the design flexibility of the recognition element (DNA, RNA, PNA, LNA) and various labeling strategies contribute to development of numerous selective and sensitive bioassays. This review covers fundamentals of the design and engineering of oligonucleotide probes, describes typical construction approaches, and discusses examples of probes used both in hybridization studies and in aptamer-based assays.     

Immobilization of amine-modified oligonucleotides on aldehyde-terminated alkanethiol monolayers on gold

Chemistry is described for the fabrication of DNA arrays on gold surfaces. Alkanethiols modified with terminal aldehyde groups are used to prepare a self-assembled monolayer (SAM). The aldehyde groups of the monolayer may be reacted with amine-modified oligonucleotides or other amine-bearing biomolecules to form a Schiff base, which may then be reduced to a stable secondary amine by treatment with sodium cyanoborohydride. The surface modifications and reactions are characterized by polarization modulation Fourier transform infrared reflection absorption spectroscopy (PM-FTIRRAS), and the accessibility, binding specificity, and stability of the DNA-modified surfaces are demonstrated in hybridization experiments.     

SERS detection of protein biochip fabricated by etching polystyrene template

In this study, a nanoscale protein chip is prepared by using an etched polystyrene (PS) template. This protein chip can be directly used for immunoassay, with the help of Surface Enhanced Raman Scattering (SERS) spectra. Some glass slides submerged in aldehyde is initially prepared, modified with antibodies, human immunoglobulin G (IgG). Then PS arrays are self-assembled on these slides with the Langmuir–Blodgett method. The PS template pattern is transferred to the human IgG substrate using an etching process—slides are exposed to O₂ plasma for 90 s. The PS nanoparticles are then washed away using phosphate buffered saline solution. Next, the slides are dipped into bovine serum albumin solution to ensure that the anti IgG would bond only to the human IgG. At this moment, a patterned protein chip is obtained. When used for protein detection, the protein chip could be immersed into labeled specificity antigen solution. Here we chose fluorescein isothiocyanate anti-human IgG. After washing, only bonded antigens remain. Fluorescence microscopy and SERS is used to characterize the samples. The SERS spectra intensity shows liner correlation with the concentration of anti-human IgG. All the experiments are conducted in a phosphate buffered saline solution at 37 °C for 2 h.     

Design and synthesis of intramolecular charge transfer-based fluorescent reagents for the highly-sensitive detection of proteins

Novel fluorescent molecular probes possessing both a hydroxystyryl and a cyanopyranyl moieties were designed and synthesized to detect the proteins via noncovalent bonding. These fluorescent probes indicated very weak fluorescence emission in the absence of protein. On the other hand, the fluorescence spectra of these probes showed a large Stokes shift and dramatic increase of fluorescence intensity, and red emission was observed after addition of BSA. These fluorescence spectral changes upon binding proteins were caused by the ICT process. Fluorescence intensities of the probes were plotted as a function of protein concentrations. A good linear relationship was observed up to 1000 microg/mL of protein, and the detection limit was found to be 100 ng/mL at the given assay conditions. Similar results were observed for the measurements of not only BSA but also other proteins (BGG, etc.). The responses of these probes to various nonprotein substances (inorganic salts, chelating agents, etc.) were observed, the fluorescence intensity did not change before and after the addition of foreign substances, and correct protein monitoring was successful using these fluorescent probes. To demonstrate the application of these probes, proteins after the separation using SDS-PAGE were stained in the medium containing 1, and the imaging of the proteins in the gel was successful. The experimental results clearly showed that these probes are good protein indicators for easy and highly sensitive detection.     

In situ synthesis of DNA micro-arrays using typography technique

A novel typography technique was developed to in situ synthesize oligonucleotide arrays on glass slide,which has the celerity,high spatial resolution,lower cost,reliable operation,and high synthetic efficiency.The principle and process of the typography technique for fabricating gene-chips have been described in detail.A suit of poly(terafluoroethylene)devices for synthesizing oligonucleotide arrays were designed and prepared,and the fiber tubes with a number of nano-or micron-channels were em- ployed.The oligonucleotide arrays of 16 and 160 features with four different probes were synthesized using the typography technique.The four specific oligonucleotide probes including the matched and the mismatched by the fluorescent target sequence gave obviously different hybridization fluorescent signals.It was indicated that the gene-chip fabricated by the typography method could be used to rapidly screen single-nucleotide polymorphisms(SNP)and to detect mutations.     

Synthesis and hybridization properties of oligonucleotide-perylene conjugates: influence of the conjugation parameters on triplex and duplex stabilities

We report here the synthesis of oligo-2'-deoxyribonucleotides (ODNs) conjugated with perylene. Introduction of perylene, coupled either directly or via a propyl linker to the anomeric position of a 2'-deoxyribose residue, induces the formation of two anomers. Single incorporations of each pure anomer of these sugar-perylene units have been performed at either the 5'-end or an internal position of a pyrimidic pentadecamer. The binding properties of these modified ODNs with their single- and double-stranded DNA targets were studied by absorption spectroscopy. Double incorporations of the sugar-perylene unit most efficient at stabilizing the triplex and duplex structures (the beta-anomer involving the propyl linker) have been performed at both the 5'-end and at an internal position (or both the 5'- and 3'-ends) of the ODN chain. Comparison has been made with ODN-perylene conjugates involving either one or two perylenes attached via a longer polymethylene chain to either the 5'- or 3'- (or both the 5'-and 3'-) terminal phosphate groups. The ODNs involving two perylenes are more efficient at stabilizing the triplex and the duplex structures than the ODNs involving only one perylene and, among these, the ODN-perylene conjugate involving two sugar-perylene units attached at both termini is the most efficient. The results of the fluorescence studies have shown an important increase in the intensity of the fluorescent signal upon hybridization of the ODNs involving two perylenes with either the single- or the double-stranded targets. This increase in the intensity of the fluorescent signal could be used as proof of the hybridization.     

Towards zirconium phosphonate-based microarrays for probing DNA-protein interactions: critical influence of the location of the probe anchoring groups

Terminal phosphate groups on double-stranded DNA probes bind strongly to glass substrates coated with a zirconium phosphonate monolayer, and probes immobilized in this way as microarrays can be used to detect protein targets. The sensitivity of the microarray was shown to be enhanced by the use of a polyguanine segment ((G)n , n > or = 5) as a spacer between the phosphate linker and the protein interaction domain. More importantly, the presence of phosphate linkers on both ends of the dsDNA probes leads to significant enhancement of target capture. The relevant characteristics of the different probes when bound to the surface were determined, by the original use of a combination of surface characterization techniques (XPS, AFM, and Sarfus). In this context, the location of the phosphate linkers in the duplex probes was found to result in different probe surface coverage and presentation on the surface, which affect subsequent interactions with the target protein.     

A Fluorescence Assay Based on GoldMag-CS Nanoparticles for Hepatitis B Virus DNA

A sensitive fluorescence assay for hepatitis B virus (HBV) DNA was developed based on the dissociation of bio-bar-code DNA probes from GoldMag-CS nanoparticles (NPs) and magnetic separation. In this method, the target sequence (HBV DNA) was recognized through sandwich hybridization by the catching probes and the detection probes. Catching probes were modified with biotins, and were specifically bound on streptavidin-coated 96-well microplates; detection probes were all attached on the GoldMag-CS nanoparticles, which also bound bio-bar-code strands with fluorescent tags. Bio-bar-codes were dissociated from the NPs by dithiothreitol (DTT) after DNA target recognition and magnetic separation, and then quantified. Streptavidin-coated 96-well microplates diminished the nonspecific binding of DNA-conjugated GoldMag-CS nanoparticles, thus lowering the background; and GoldMag-CS nanoparticles provided easy separation and significant signal amplification. Together, these two effects brought about the detection limit as low as 7.52 fM.     

基因芯片-玻璃表面两种不同DNA探针固定化方法的比较研究

研究了基因芯片相关的DNA探针在芯片表面最佳固定化方法。用两种不同的双功能试剂1,4-苯二异硫氰酸酯和戊二醛分别把5'-端氨基衍生的21-mer寡脱氧核苷酸探针直接共价固定到玻片表面,固定化的寡脱氧核苷酸探针与5'-端FITC标记的互补靶序列进行分子杂交,杂交后用配有CCD的IX70型荧光倒置显微镜成像检测。结果表明,两种固定化方法的效果都比较好,能检测到靶序列的最低终浓度为1.5×10^-9mol/L,优化了探针固定化时间、杂交时间、杂交温度等对DNA芯片分析性能的影响,为构建高灵敏度基因芯片打下良好基础。     

Poly(dG) spacers lead to increased surface coverage of DNA probes: an XPS study of oligonucleotide binding to zirconium phosphonate modified surfaces

A spacer is often employed between the surface linking group and the probe sequence to improve the performance of DNA microarrays. Previous work demonstrated that a consecutive stretch of guanines as a spacer increased target capture during hybridization relative to probes with either no spacer or a similar stretch of one of the other nucleotides. Using zirconium phosphonate modified surfaces with 5'-phosphorylated ssDNA probes, the present study compares the surface coverage of ssDNA probes containing either a poly(dG) spacer or a poly(dA) spacer. Surface coverages are quantified by XPS using a modified overlayer model. The results show that after treatment to mimic conditions of the passivation and hybridization steps the probe with the poly(dG) spacer has about twice the surface coverage as the probe with the poly(dA) spacer, indicating that increased target capture is due to higher probe coverage. When monitoring the surface coverage after each rinsing step, it is observed that the probe with the poly(dA) spacer is more susceptible to rinsing, suggesting the interaction with the surface is different for the two probes. It is suggested that the formation of G quadruplexes causes an increased avidity of the probe for the zirconium phosphonate surface.     

Langmuir-Blodgett monolayers of long-chain NBD derivatives on silver island films: Well-organized probe layer for the metal-enhanced fluorescence studies

The metal-enhanced fluorescence (MEF) from the well-organized monolayers of two newly prepared long-chain alkylamine derivatives of nitrobenzoxadiazole (NBD-C16 and NBD-C18) deposited on silver island films (SIFs) has been investigated. The NBD derivatives were conveniently prepared by using a single step procedure in quantitative yields. The monolayers of the probes on SIFs as well as on bare-glass slides were obtained by using the Langmuir-Blodgett (LB) technique. Orientation of the NBD probe molecule in LB monolayer film was measured with polarized absorption spectroscopy. The observed tilt angle of the probe transition dipole moment with respect to the surface normal of approximately 67-68 degrees was evaluated. We observed that the NBD monolayers deposited in close proximity to silver islands show about a 16-fold increase in fluorescence intensity and shortened fluorescence lifetime compared to those on bare-glass, which are due to metal enhanced fluorescence. On the other hand, the corresponding MEF from randomly oriented film obtained by using spin coating of the probes on SIFs was only 2.5-fold. Further, we deposited mixed monolayers of NBD-C16 or NBD-C18 with various molar ratios of stearic acid to understand the polarity effect on MEF. Interestingly, we found a consistent increase in MEF efficiency with increasing molar ratio of stearic acid. Along with MEF, we also found a continuous blue-shift in emission band maxima of the probes with an increasing molar ratio of stearic acid. The observed increase in MEF efficiency is justified based on cooperative effects of (1) the modulations in electronic density of the surface plasmon absorption band of SIFs and (2) defined probe orientation that might lead to preferential excitation.     

Fabrication of DNA microarrays on nanoengineered polymeric ultrathin film prepared by self-assembly of polyelectrolyte multilayers

Microarray-based technology is in need of flexible and cost-effective chemistry for fabrication of oligonucleotide microarrays. We have developed a novel method for the fabrication of oligonucleotide microarrays with unmodified oligonucleotide probes on nanoengineered three-dimensional thin films that are deposited on glass slides by consecutive layer-to-layer adsorption of polyelectrolytes. Unmodified oligonucleotide probes were spotted and immobilized on these multilayered polyelectrolyte thin films (PET) by electrostatic adsorption and entrapment on the porous structure of the PET film. The PET provides higher probe binding capacity and thus higher hybridization signal than that of the traditional two-dimensional aminosilane and poly-L-lysine coated slides. Immobilized probe densities of 3.4 x 10(12)/cm2 were observed for microarray spots on PET with unmodified 50-mer oligonucleotide probes, which is comparable to the immobilized probe densities of alkyamine-modified 50-mer probes end-tethered on an aldehyde-functionalized slide. The study of hybridization efficiency showed that 90% of immobilized probes on PET film are accessible to target DNA to form duplex format in hybridization. The DNA microarray fabricated on PET film has wider dynamic range (about 3 orders of magnitude) and lower detection limit (0.5 nM) than the conventional amino- and aldehyde-functionalized slides. Oligonucleotide microarrays fabricated on these PET-coated slides also had consistent spot morphology. In addition, discrimination of single nucleotide polymorphism of 16S rRNA genes was achieved with the PET-based oligonucleotide microarrays. The PET microarrays constructed by our self-assembly process is cost-effective, versatile, and well suited for immobilizing many types of biological active molecules so that a wide variety of microarray formats can be developed.     

Fluorescence-quenching phenomenon by photoinduced electron transfer between a fluorescent dye and a nucleotide base.

Fluorescently labeled oligonucleotide probes have been widely used in biotechnology, and fluorescence quenching by the interaction between the dyes and a nucleobase has been pointed out. This quenching causes big problem in analytical methods, but is useful in some other cases. Therefore, it is necessary to estimate the fluorescence quenching intensity under various conditions. We focused on the redox properties of some commercially available fluorescent dyes, and investigated dye-nucleotide interactions between a free dye and a nucleotide in aqueous solution by electrochemical and spectroscopic techniques. Our results suggested that the quenching was accompanied by photoinduced electron transfer between a thermodynamically quenchable excited dye and a specific base. Several kinds of fluorescent dyes labeled to the 5'-end of oligonucleotide C10T6 were prepared, and their quenching ratios compared upon hybridization with the complementary oligonucleotide A6G10. The quenching was completely reversible and their efficiencies depended on the attached fluorophore types. The fluorescence of 5-FAM, BODIPY FL or TAMRA-modified probe was strongly quenched by hybridization.     

Fluorescence-labelled DNA probes to detect complementary sequences in homogeneous media

Sensitive, safe and easy-to-use probes for the detection of nucleic acids are urgently called for. To this end we are in the process of developing a fluorescence-based technique to work in homogeneous assay media. We have examined pyrene and fluorescein as fluorescent labels for natural DNA probes. A fraction of the cytosine residues of a single-stranded cDNA was randomly labelled with either pyrene or fluorescein using the bisulfite-catalyzed diamine reaction. Both fluorophores showed fluorescence quenching when the labelled probe was hybridized with its complementary strand and we describe the changes in steady-state fluorescence intensity that occurred upon hybridization. Our results demonstrate that pyrene quenching is more efficient than fluorescein quenching and thus pyrene-labelled probes are more sensitive for detecting and quantifying DNA from natural sources.     

Effect of oligonucleotide probes substituted by deoxyinosines on the specificity of SNP detection on the DNA microarray

One of the main factors that can affect the quality of microarray results is the microarray hybridization specificity. The key factor that affects hybridization specificity is the design of the probes. In this paper, we described a novel oligonucleotide probe containing deoxyinosines aimed at improving DNA hybridization specificity. We compared different probes to determine the distance between deoxyinosine base and SNPs site and the number of deoxyinosine bases. The new probe sequences contained two set of deoxyinosines (each set had two deoxyinosines), in which the interval between SNP site and each set of deoxyinosines was two bases. The new probes could obtain the highest hybridization specificity. The experimental results showed that probes containing deoxyinosines hybridized effectively to the perfectly matched target and improved the hybridization specificity of DNA microarray. By including a simple washing step after hybridization, these probes could distinguish matched targets from single‐base‐mismatched sequences perfectly. For the probes containing deoxyinosines, the fluorescence intensity of a match sequence was more than eight times stronger than that of a mismatch. However, the intensity ratio was only 1.3 times or less for the probes without deoxyinosines. Finally, using hybridization of the PCR product microarrays, we successfully genotyped SNP of 140 samples using these new labeled probes. Our results show that this is a useful new strategy for modifying oligonucleotide probes for use in DNA microarray analysis.     

Hybridization-sensitive fluorescence control in the near-infrared wavelength range

A series of near-infrared fluorescent probes were designed based on the concept of emission control caused by interdye excitonic interaction. The fluorescent probes showed very weak emission in the unhybridized state, whereas they emitted near-infrared fluorescence after hybridization with the complementary nucleic acid. The hybridization-dependent switching of fluorescence emission made it possible to monitor mRNA in human cells in the range of near-infrared wavelengths.