Synthesis of 1‐Methyl‐6,10‐diphenylheptalene Derivatives

The reduction of heptalene diester 1 with diisobutylaluminium hydride (DIBAH) in THF gave a mixture of heptalene‐1,2‐dimethanol 2a and its double‐bond‐shift (DBS) isomer 2b (Scheme 3). Both products can be isolated by column chromatography on silica gel. The subsequent chlorination of 2a or 2b with PCl₅ in CH₂Cl₂ led to a mixture of 1,2‐bis(chloromethyl)heptalene 3a and its DBS isomer 3b . After a prolonged chromatographic separation, both products 3a and 3b were obtained in pure form. They crystallized smoothly from hexane/Et₂O 7 : 1 at low temperature, and their structures were determined by X‐ray crystal‐structure analysis (Figs. 1 and 2). The nucleophilic exchange of the Cl substituents of 3a or 3b by diphenylphosphino groups was easily achieved with excess of (diphenylphospino)lithium (=lithium diphenylphosphanide) in THF at 0° (Scheme 4). However, the purification of 4a / 4b was very difficult since these bis‐phosphines decomposed on column chromatography on silica gel and were converted mostly by oxidation by air to bis(phosphine oxides) 5a and 5b . Both 5a and 5b were also obtained in pure form by reaction of 3a or 3b with (diphenylphosphinyl)lithium (=lithium oxidodiphenylphospanide) in THF, followed by column chromatography on silica gel with Et₂O. Carboxaldehydes 7a and 7b were synthesized by a disproportionation reaction of the dimethanol mixture 2a / 2b with catalytic amounts of TsOH. The subsequent decarbonylation of both carboxaldehydes with tris(triphenylphosphine)rhodium(1+) chloride yielded heptalene 8 in a quantitative yield. The reaction of a thermal‐equilibrium mixture 3a / 3b with the borane adduct of (diphenylphosphino)lithium in THF at 0° gave 6a and 6b in yields of 5 and 15%, respectively (Scheme 4). However, heating 6a or 6b in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) in toluene, generated both bis‐phosphine 4a and its DBS isomer 4b which could not be separated. The attempt at a conversion of 3a or 3b into bis‐phosphines 4a or 4b by treatment with t‐BuLi and Ph₂PCl also failed completely. Thus, we returned to investigate the antipodes of the dimethanols 2a, 2b , and of 8 that can be separated on an HPLC Chiralcel‐OD column. The CD spectra of optically pure (M)‐ and (P)‐configurated heptalenes 2a, 2b , and 8 were measured (Figs. 4, 5, and 9).     

Reactivity of 2‐Methyl‐4H‐3,1‐benzoxazin‐4‐ones and 2‐Methyl‐4H‐pyrido[2,3‐d][1,3]oxazin‐4‐one under Microwave Irradiation Conditions

The reactivity of variably substituted 2‐methyl‐4H‐3,1‐benzoxazin‐4‐ones and 2‐methyl‐4H‐pyrido[2,3‐d][1,3]oxazin‐4‐one towards carbon and oxygen nucleophiles under microwave irradiation conditions was investigated. Optimization of the reaction conditions of oxazinones with carbon nucleophiles led to the synthesis of a series of 4‐hydroxy‐quinolin‐2‐ones and 4‐hydroxy‐1,8‐naphthyridin‐2‐ones in high yields, whereas reaction with a variety of alcohols proceeded smoothly to the formation of the corresponding N‐acetyl‐anthranilates and nicotinates.     

Living Anionic Polymerization of 2‐Methyl‐4‐ phenyl‐1‐buten‐3‐yne

The anionic polymerization behavior of 2‐methyl‐4‐phenyl‐1‐buten‐3‐yne (2) was investigated to get information on the effect of substituent at the 2‐position. The polymerization of 2 did not proceed in tetrahydrofuran at –78°C by lithium initiators, while sodium initiators can conduct the polymerization smoothly to give polymers consisting of a specific 1,2‐polymerized unit. The living nature of the polymerization of 2 by diphenylmethylsodium was supported by the post‐polymerization experiment.     

Synthesis and Biological Activity of 3‐Methyl‐1H‐pyrazole‐4‐carboxylic Ester Derivatives

In search of novel pyrazole derivatives with bioactivity, a series of 3‐methyl‐1H‐pyrazole‐4‐caboxylic: ester derivatives were synthesized via α‐oxoketene dithioacetals as starting material. The structures of all compounds prepared were confirmed by ^lH NMR, IR, MS and elemental analyses. Preliminary bioassays indicated that some compounds showed fungicidal activity against wheat rust, phoma asparagi and antiviral activity against TMV.     

Synthesis and Characterization of Novel 1‐Methyl‐3‐(4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazole Derivatives

A series of novel 1‐methyl‐3‐(4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazoles was synthesized in three steps from 5‐(1‐methyl‐1H‐indazol‐3‐yl)‐4‐phenyl‐2H‐1,2,4‐triazole‐3(4H)‐thiones. 5‐(1‐Methyl‐1H‐indazol‐3‐yl)‐4‐phenyl‐2H‐1,2,4‐triazole‐3(4H)‐thiones were converted into 1‐methyl‐3‐(5‐(methylsulfonyl)‐4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazoles upon methylation followed by treatment with aq. KMnO₄. The reaction of 1‐methyl‐3‐(5‐(methylsulfonyl)‐4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazoles with Raney nickel resulted in desulphonylation to afford corresponding 1‐methyl‐3‐(4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazoles. All the new synthesized compounds were characterized by spectral techniques.     

2‐Methyl‐1,4,5‐triphenyl‐1H‐imidazole

In 2‐methyl‐1,4,5‐tri­phenyl‐1H‐imidazole, C₂₂H₁₈N₂, the three substituent phenyl groups are not delocalized with the imidazole moiety; the dihedral angles these phenyl groups form with the imidazole ring are in the range 25.90 (5)–63.49 (6)°.     

Isomerization of 4‐Methyl‐1‐pentene and 1‐Hexene Catalysed by Macroporous Ion Exchange Resin: A Kinetic Study

The isomerization of 4‐methyl‐1‐pentene and 1‐hexene, thermodynamically the most unstable propene dimers, was studied. The isomerization was catalyzed by strongly acidic ion exchange resins in the temperature range of 362‐384 K and under atmospheric pressure. The reaction scheme and kinetic equations, which best fit the experimental data are given.     

5‐Methyl‐2‐thiouracil

The molecular structure of the title compound, also known as 2‐thio­thymine [systematic name: 2,3‐di­hydro‐5‐methyl‐2‐thioxopyrimidin‐4(1H)‐one], C₅H₆N₂OS, is similar to that of thymine, with only small changes in the ring structure, apart from a significant difference at the substitution site [S=C = 1.674 (1) Å]. The mol­ecules are connected by hydrogen bonds, with N—H?O = 2.755 (2) Å and N—H?S = 3.352 (1) Å. The hydrogen‐bond network is different from that in thymine, since it involves all the donor and acceptor atoms.     

Facile and Selective Synthesis of 4‐Methyl‐ and 4‐Phenylthiosemicarbazide (=N‐Methyl‐ and N‐Phenylhydrazinecarbothioamide) Derivatives of Benzil (=1,2‐Diphenylethane‐1,2‐dione)

A selective synthesis of 4‐methylthiosemicarbazide (=N‐methylhydrazinecarbothioamide; 4a ) derivatives by reaction with benzil (=1,2‐diphenylethane‐1,2‐dione; 3 ) is described. The reaction conditions determined the condensation product formed. The most important factor was the acid used: in the presence of conc. HCl solution, the open‐chain 2 : 1 compound 1a was exclusively obtained, whereas in the presence of 2M HCl, the cyclic 1 : 1 condensation product 2a was formed. The alcohol used, the presence of H₂O, and the time of heating were additional crucial factors. The new cyclic compound 2a with a MeO group was exclusively formed when working under high‐dilution conditions. The reaction with the 4‐phenyl derivative 4b gave new cyclic compounds as the major products under all conditions used (Scheme).     

4‐Nitro­anilinium nitrate

The crystal structure of the title compound, C₆H₇N₂O₂⁺·NO₃⁻, is built up from 4‐nitro­anilinium cations and nitrate anions. The NO₂ group is coplanar with the aryl ring, which shows significant distortion from the ideal hexagonal form. The NO₃⁻ anion is planar but shows distortion from the C_3h symmetry that is predicted by molecular orbital calculations. Two of the three O atoms of the NO₃ group are involved in hydrogen bonds as acceptors.     

1‐Methyl‐5,6‐di­phenyl­pyrazine‐2(1H)‐thione

The title compound, C₁₇H₁₄N₂S, crystallizes in a triclinic unit cell, with two crystallographically independent mol­ecules in the asymmetric unit. The two independent mol­ecules pack in the same sense and form segregated layers along the c axis. The crystal is light‐stable and no dimers are formed under irradiation. The intermolecular distances between the potential reactive centers (the C‐3 and C‐5 ring positions) are 4.093 (4) and 5.643 (4) Å for mol­ecule A, and 4.081 (4) and 5.614 (4) Å for mol­ecule B.     

Synthesis and Antibacterial Activities of 2‐(1‐Aryl‐5‐Methyl‐1,2,3‐triazol‐4‐yl)‐1,3,4‐Oxadiazole Derivatives

Eighteen novel 2‐(1‐aryl‐5‐methyl‐1,2,3‐triazol‐4‐yl)‐1,3,4‐oxadiazole derivatives and two acylhydrazone intermediate compounds were synthesized by various pathways starting from 1‐aryl‐5‐methyl‐1,2,3‐triazol‐4‐formhydrazide ( 1 ). All products were identified by spectroscopic analysis, and 2‐(1‐aryl‐5‐methyl‐1,2,3‐triazol‐4‐yl)‐5‐benzalthio‐1,3,4‐oxadiazole was further validated by X‐ray crystallography. Results from primary antibacterial activity tests indicated that most of the compounds were effective against E. coli, P. aeruginosa, B. subtilis and S. aureus.     

(1R,2S)‐2‐[N‐Methyl‐N‐(4‐toluene­sulfonyl)amino]‐1‐phenylpropan‐1‐ol

In the title compound, C₁₇H₂₁NO₃S, the S atom is in a distorted tetrahedral geometry and the N atom exhibits sp² character. The antiperiplanar conformation is observed for the N and hydroxyl‐O atoms and the torsion angle around the N—C linkage is ?136.3 (2)°. The mol­ecules are linked by O—H?O intermolecular hydrogen bonds to form an infinite one‐dimensional chains along the c axis.     

Syntheses and Crystal Structures of Copper(II) and Silver Complexes with 5‐Methyl‐1‐(4‐Methylphenyl)‐1,2,3‐Triazol‐4‐Carboxylic Acid

Two novel complexes [Cu L ₂(MeOH)] ( 1 )and [Ag₂ L (H L )₂(MeOH)] ( 2 ) ( L = 5‐methyl‐1‐(4‐methylphenyl)‐1,2,3‐triazol‐4‐carboxylic acid) were synthesized and characterized by elemental analysis, IR and X‐ray diffraction. Complex 1 is a mononuclear structure; the molecules were assembled into an infinite 2–D supramolecular by the C–H···O weak interactions. Complex 2 is a centrosymmetric dinuclear structure with bis(unidentate) carboxylato co‐ordination mode, and the molecules were assembled into 2–D layers by C–H···O and O–H···O weak interactions.     

Photoredox Catalytic α‐Alkoxypentafluorosulfanylation of α‐Methyl‐ and α‐Phenylstyrene Using SF6

SF₆ was applied as pentafluorosulfanylation reagent to prepare ethers with a vicinal SF₅ substituent through a one‐step method involving photoredox catalysis. This method shows a broad substrate scope with respect to applicable alcohols for the conversion of α‐methyl and α‐phenyl styrenes. The products bear a new structural motif with two functional groups installed in one step. The alkoxy group allows elimination and azidation as further transformations into valuable pentafluorosulfanylated compounds. These results confirm that non‐toxic SF₆ is a useful SF₅ transfer reagent if properly activated by photoredox catalysis, and toxic reagents are completely avoided. In combination with light as an energy source, a high level of sustainability is achieved. Through this method, the proposed potential of the SF₅ substituent in medicinal chemistry, agrochemistry, and materials chemistry may be exploited in the future.     

1‐Methyl‐1H‐imidazo[4,5‐f]quinolin‐6‐ium chloride monohydrate

The title compound, C₁₁H₁₀N₃⁺·Cl^?·H₂O, belongs to the N1‐methyl‐substituted imidazo­[4,5‐f]­quinoline family, in which the heterocyclic ring is protonated at the pyridine rather than at the imidazole N atom. The mol­ecule as a whole is almost exactly planar. The molecular structure has been compared with that of the 2‐amino analogue described in the literature, and it was found that the extra amino group of the latter is involved in conjugation with the adjacent double bond, i.e. the conjugation does not extend over the entire heterocyclic system. The cation of the title compound forms a strong hydrogen bond with the Cl^? anion and the anions are interconnected by the water solvent mol­ecule.     

Acid Catalyzed tert‐Butylation and Tritylation of 4‐Nitro‐1,2,3‐triazole: Selective Synthesis of 1‐Methyl‐5‐nitro‐1,2,3‐triazole via 1‐tert‐Butyl‐4‐nitro‐1,2,3‐triazole

4‐Nitro‐1,2,3‐triazole was found to react with tert‐butanol in concentrated sulfuric acid to yield 1‐tert‐butyl‐4‐nitro‐1,2,3‐triazole as the only reaction product, whereas tert‐butylation and tritylation of 4‐nitro‐1,2,3‐triazole in presence of catalytic amount of sulfuric acid in benzene was found to provide mixtures of isomeric 1‐ and 2‐alkyl‐4‐nitro‐1,2,3‐triazoles with predominance of N2‐alkylated products. A new methodology for preparation of 1‐alkyl‐5‐nitro‐1,2,3‐triazoles from 1‐tert‐butyl‐4‐nitro‐1,2,3‐triazole via exhaustive alkylation followed by removal of tert‐butyl group from intermediate triazolium salts was demonstrated by the example of preparation of 1‐methyl‐5‐nitro‐1,2,3‐triazole.