Use of an isotactic‐propylene/hexene copolymer as a new,versatile, soluble support

The use of isotactic‐poly(propylene‐co‐hexene) (iPPH) as new polymeric scaffold for synthesis as well as a phase‐selective, soluble polymer support for homogeneous catalysis is described. It was possible to functionalize olefin‐terminated iPPH using standard organic transformations. Each derivative could be isolated and purified using typical precipitations into a minimum amount of polar solvent, negating the need for wasteful work up and chromatographic procedures. Furthermore, it was demonstrated that an iPPH‐supported DMAP could serve as a recoverable, recyclable catalyst. Published 2013. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 600–605     

An efficient solid‐phase synthesis of substituted benzofuran using selenium‐bound resin

A very efficient solid‐phase synthesis of substituted benzofuran using polymer‐supported selenium resin is described. The advantages of the new method are good yields, high purity, straightforward operations, broad range and high diversity of products, lack of odor, and good stability of the resins. The easy work‐up procedure makes the method suitable for building parallel libraries. Copyright © 2012 John Wiley & Sons, Ltd.     

A tailor‐made polymethacrylate bearing a reactive diene in reversible diels–alder reaction

A tailor‐made polymethacrylate bearing a pendant furfuryl group was prepared by atom transfer radical polymerization (ATRP), an important method of recent advances in controlled radical polymerization. It was otherwise difficult to prepare via conventional radical polymerization, because of several side reactions involving the reactive diene functionality of the furfuryl group. Successful Diels–Alder (DA) chemistry was carried out using this reactive furfuryl group of the tailor‐made polymer as diene and a bismaleimide as a dienophile. Interestingly, the resultant material was observed to be thermoreversible as evidenced by FT‐IR and DSC studies. This example of application of a tailor‐made polymer having controlled molecular architecture and with reactive diene functionality in DA chemistry will open new possibilities to prepare newer tailor‐made reversible materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4441–4449, 2007     

Using polymers to control substrate,ligand, or catalyst solubility

The attributes and design of soluble polymer supports for catalysis and synthesis are discussed. By manipulating polymer structure, polymer supports can be prepared so that the solubility of an attached reagent, substrate, or ligand is affected by heating, cooling, pH, or solvent identity. Supports with such engineered solubility are useful both in organic synthesis and catalysis. They can be used as purification handles in organic synthesis as a way to recover catalysts, as a way to turn reactions on or off, and more generally, as a handle for separations. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2351–2363, 2001     

Chemistry and technology of 2‐alkenyl azlactones

The chronology of 2‐alkenyl azlactone research at 3M is discussed in terms of its origination; consideration of economics, overall safety, and opportunities for patent protection; elaboration of the chemistry; and, finally, applying lessons learned toward the development of commercial technologies. The chemistry is dominated by the presence of three electrophilic reaction centers and a readily polymerizable 2‐alkenyl group. Technological development has been focused in four general areas: acrylamide monomers, acrylamide materials, azlactone materials, and polymer modification. Application areas disinclude lithographic printing plates, contact lens materials, adhesives, dispersants for printing inks, and supports for immobilizing enzymes. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3655–3677, 2001     

Synthesis,characterization, and heterogeneous catalysis of polymer‐supported poly(propyleneimine) dendrimer stabilized gold nanoparticle catalyst

We report here, the synthesis of two types of heterogeneous nanoparticle catalysts viz., polymer‐supported poly(propyleneimine)‐G2 dendrimer stabilized gold nanoparticle catalysts using crosslinked poly(4‐vinylpyridine) matrix (PSP4VP) as support material. The grafting of dendrimer on the surface of P4VP beads was characterized by FTIR spectrophotometer and CHN analyses. The immobilization of AuNPs was characterized by UV‐Vis spectrum, SEM, and HRTEM studies. The resultant polymer‐supported dendrimer stabilized AuNPs were used as a heterogeneous catalyst for the reduction of 4‐nitrophenol. The catalytic activity is found to be excellent and it can also be reused many times by simple filtration and activity remains maintained. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2525–2532, 2010     

Synthesis and electrooptic properties of side‐chain methacrylate polymers containing a new azophenylbenzoxazole chromophore

The synthesis and characterization of four methacrylate copolymers obtained by radical addition polymerization of methyl methacrylate as well as a new methacrylate azophenylbenzoxazole chromophore in percentages of 10, 30, 50, and 70% were explored. The copolymers were amorphous and showed glass‐transition temperatures ranging from 132 to 146 °C. High‐quality polymer films were easily obtained by spin coating from N‐methylpyrrolidone solutions. Polymer films spun cast on iridium tin oxide (ITO) substrates were used in the electro‐optic (EO) experiments to evaluate the EO coefficients r₃₃ using the reflection technique. The measured values fell in the range of 1.7–3.7 pm/V (laser incident wavelength of 1.552 μm) depending on the percentage of chromophore in the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1162–1168, 2001     

Reactive ligand influence on initiation in phenylene catalyst‐transfer polymerization

Synthesizing conjugated polymers via catalyst‐transfer polymerization (CTP) has led to unprecedented control over polymer sequence and molecular weight. Yet many challenges remain, including broadening the monomer scope and narrowing the molecular weight dispersities. Broad polymer dispersities can arise from nonliving pathways as well as slow initiation. Previously, slow initiation was observed in Ni‐mediated CTP of phenylene monomers. Although precatalysts with faster initiation rates have been reported, the rates still do not exceed propagation. Herein a second‐ and third‐generation of reactive ligands are described, along with a simple method for measuring initiation rates. A precatalyst with an initiation rate that exceeds propagation is now reported, however, the resulting polymer samples still exhibit broad dispersities, suggesting that slow initiation is not the most significant contributing factor in Ni‐mediated phenylene polymerizations. In addition, initiation rates measured under authentic polymerization conditions revealed that both exogenous triphenylphosphine and an ortho‐trifluoroethoxy substituent on the reactive ligand have a strong influence. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1530–1535     

Copolymerization of propylene with various higher α‐olefins using silica‐supported rac‐Me2Si(Ind)2ZrCl2

The copolymerization of propylene with 1‐hexene, 1‐octene, 1‐decene, and 1‐dodecene was carried out with silica‐supported rac‐Me₂Si(Ind)₂ZrCl₂ as a catalyst. The copolymerization activities of the homogeneous and supported catalysts and the microstructures of the resulting copolymers were compared. The activity of the supported catalyst was only one‐half to one‐eighth of that of the homogeneous catalyst, depending on the comonomer type. The supported catalyst copolymerized more comonomer into the polymer chain than the homogeneous catalyst at the same monomer feed ratio. Data of reactivity ratios showed that the depression in the activity of propylene instead of an enhancement in the activity of olefinic comonomer was responsible for this phenomenon. We also found that copolymerization with α‐olefins and supporting the metallocene on a carrier improved the stereoregularity and regioregularity of the copolymers. The melting temperature of all the copolymers decreased linearly with growing comonomer content, regardless of the comonomer type and catalyst system. Low mobility of the propagation chain in the supported catalyst was suggested as the reason for the different polymerization behaviors of the supported catalyst with the homogeneous system. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3294–3303, 2001     

Highly active,thermo‐responsive polymeric catalytic system for reuse in aqueous and organic CuAAC reactions

Tris‐(benzyltriazolylmethyl)amine (TBTA) has been immobilized onto a styrenic monomer and subsequently copolymerized with N‐isopropyl acrylamide (NIPAM) to afford catalytically active thermo‐responsive copolymers for copper assisted click chemistry. P(TBTA‐co‐NIPAM) copolymers were synthesized with incorporation of between 2 and 10 ligand units per chain and tuneable molecular weight (28–148 kDa). A combination of ¹H NMR spectroscopy, size exclusion chromatography (SEC) and elemental analysis (EA) confirmed the controlled synthesis of these polymers and allowed for quantification of the degree of TBTA‐functionalized monomer incorporation. After loading with copper(I) bromide, this homogeneous catalyst system was added to a water/ethyl acetate two‐phase system. Using this biphasic system aqueous click reactions could be performed at room temperature, while organic click chemistry could be performed above the cloud point temperature of the catalyst system. The polymer catalyst system could be regenerated via extraction by making use of its lower critical solution temperature (LCST)‐behavior, and then reused for further copper(I) catalyzed azide‐alkyne cycloaddition (CuAAC) reactions. While a reduced catalytic activity is observed as a result of copper leaching in aqueous click reactions, the recycling experiments in the organic phase demonstrated that this copolymer supported system allows for efficient recycling and reuse. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Poly(ionic liquid)s based on imidazolium hydrogen carbonate monomer units as recyclable polymer‐supported N‐heterocyclic carbenes: Use in organocatalysis

Synthesis of novel poly(ionic liquid)s, namely, poly(1‐vinyl‐3‐alkylimidazolium hydrogen carbonate)s, denoted as poly([NHC(H)][HCO₃])s or PVRImHCO₃, where R is an alkyl group (R = ethyl, butyl, phenylethyl, dodecyl), is described. Two distinct synthetic routes were explored. The first method is based on the free‐radical polymerization (FRP) of 1‐vinyl‐3‐alkylimidazolium monomers featuring a hydrogen carbonate counter anion (HCO₃^?), denoted as VRImHCO₃. The latter monomers were readily synthesized by alkylation of 1‐vinylimidazole (VIm), followed by direct anion exchange of 1‐vinyl‐3‐alkylimidazolium bromide monomers (VRImBr), using potassium hydrogen carbonate (KHCO₃) in methanol at room temperature. Alternatively, the same anion exchange method could be applied onto FRP‐derived poly(1‐vinyl‐3‐alkylimidazolium bromide) precursors (PVRImBr). All PVRImHCO₃ salts proved air stable and could be manipulated without any particular precautions. They could serve as polymer‐supported precatalysts to generate polymer‐supported N‐heterocyclic carbenes, referred to as poly(NHC)s, formally by a loss of “H₂CO₃” (H₂O +CO₂) in solution. This was demonstrated through selected organocatalyzed reactions of molecular chemistry, known as being efficiently mediated by molecular NHC catalysts, including benzoin condensation, transesterification and cyanosilylation of aldehyde. Of particular interest, recycling of the polymer‐supported precatalysts was possible by re‐carboxylation of in situ generated poly(NHC)s. Organocatalyzed reactions could be performed with excellent yields, even after five catalytic cycles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4530–4540     

Controlling supramolecular polymerization through multicomponent self‐assembly

The self‐assembly into supramolecular polymers is a process driven by reversible non‐covalent interactions between monomers, and gives access to materials applications incorporating mechanical, biological, optical or electronic functionalities. Compared to the achievements in precision polymer synthesis via living and controlled covalent polymerization processes, supramolecular chemists have only just learned how to developed strategies that allow similar control over polymer length, (co)monomer sequence and morphology (random, alternating or blocked ordering). This highlight article discusses the unique opportunities that arise when coassembling multicomponent supramolecular polymers, and focusses on four strategies in order to control the polymer architecture, size, stability and its stimuli‐responsive properties: (1) end‐capping of supramolecular polymers, (2) biomimetic templated polymerization, (3) controlled selectivity and reactivity in supramolecular copolymerization, and (4) living supramolecular polymerization. In contrast to the traditional focus on equilibrium systems, our emphasis is also on the manipulation of self‐assembly kinetics of synthetic supramolecular systems. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 34–78     

The power of thiol‐ene chemistry

As a tribute to Professor Charlie Hoyle, we take the opportunity to review the impact of thiol‐ene chemistry on polymer and materials science over the past 5 years. During this time, a renaissance in thiol‐ene chemistry has occurred with recent progress demonstrating its unique advantages when compared with traditional coupling and functionalization strategies. Additionally, the robust nature of thiol‐ene chemistry allows for the preparation of well‐defined materials with few structural limitations and synthetic requirements. To illustrate these features, the utility of thiol‐ene reactions for network formation, polymer functionalization, dendrimer synthesis, and the decoration of three‐dimensional objects is discussed. Also, the development of the closely related thiol‐yne chemistry is described. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 743–750, 2010     

Synthesis and properties of vinyl‐terminated and silicon‐containing polysulfones and polyketones

4‐Fluorophenylsulfonylphenyl‐terminated polysulfone and 4‐fluorobenzoylphenyl ketone were prepared with bisphenol A and an excess of bis‐(4‐fluorophenyl)sulfone or 4,4′‐difluorobenzophenone, respectively, at 160 °C using potassium carbonate in N,N‐dimethylacetamide. The resulting polymers were reacted with 4‐hydroxystyrene to synthesize vinyl‐terminated polysulfones and ketones. The silicon‐containing polysulfones and ketones were prepared from the vinyl‐terminated polymer precursor and various H‐functional silanes or siloxanes. The synthesis of silicon‐containing polymers was achieved by hydrosilation with a rhodium catalyst. It was shown that the hydrosilation reaction proceeds with 55:45 chemoselectivity. The resulting polymers were investigated by ¹H NMR spectroscopy, DSC, and thermogravimetric analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2937–2942, 2001     

The emerging utility of ketenes in polymer chemistry

The continued evolution of functional materials that contribute to pressing societal challenges requires the development of powerful synthetic methodologies in polymer systems. Since their discovery by Staudinger in the early 20th century, the unique chemistry of ketenes have fascinated synthetic chemists and been the driver of revolutionary applications in photolithography, medicinal chemistry, and commodity materials. The versatile chemistry of ketenes, specifically their ability to act as an electrophile and/or undergo cycloaddition reactions, has recently been shown to provide a powerful platform for the design of next‐generation materials. This Highlight focuses on the history of ketenes in materials science and their recent renaissance in polymer chemistry, with specific focus being given to methodologies that provide reliable access to this important functional group in polymer systems. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3769–3782     

Simultaneous long‐chain branching and random scission: I. Monte Carlo simulation

In free‐radical olefin polymerizations, the polymer transfer reactions could lead to chain scission as well as forming long‐chain branches. For the random scission of branched polymers, it is virtually impossible to apply usual differential population balance equations because the number of possible scission points is dependent on the complex molecular architecture. On the other hand, the present problem can be solved on the basis of the probability theory by considering the history of each primary polymer molecule in a straightforward manner. The random sampling technique is used to solve this problem and a Monte Carlo simulation method is proposed. In this simulation method, one can observe the structure of each polymer molecule formed in this complex reaction system, and virtually any structural information can be obtained. In the illustrative calculations, the full molecular weight distribution development, the gel point determination, and examples of two‐ and three‐dimensional polymer structure are shown. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 391–403, 2001     

Facilitating polymer conjugation via combination of RAFT polymerization and activated ester chemistry

The synthesis of block copolymers via polymer conjugation of well‐defined building blocks offers excellent control over the structures obtained, but often several coupling strategies need to be explored to find an efficient one depending on the building blocks. To facilitate the synthesis of polymers with adjustable functional end‐groups for polymer conjugation, we report on the combination of activated ester chemistry with RAFT polymerization using a chain transfer agent (CTA) with a pentafluorophenyl ester (PFP‐CTA), which allows for flexible functionalization of either the CTA prior to polymerization or the obtained polymer after polymerization. Different polymethacrylates, namely PMMA, P(t‐BuMA) and PDEGMEMA, were synthesized with an alkyne‐CTA obtained from the aminolysis of the PFP‐CTA with propargylamine, and the successful incorporation of the alkyne moiety could be shown via ¹H and ¹³C NMR spectroscopy and MALDI TOF MS. Further, the reactive α‐end‐groups of polymers synthesized using the unmodified PFP‐CTA could be converted into azide and alkyne end‐groups after polymerization, and the high functionalization efficiencies could be demonstrated via successful coupling of the resulting polymers via CuAAC. Thus, the PFP‐CTA allows for high combinatory flexibility in polymer synthesis facilitating polymer conjugation as useful method for the synthesis of block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of water‐soluble barbiturate‐ and thiobarbiturate‐functionalized polystyrene

The synthesis and characterization of barbiturate‐ and thiobarbiturate‐functionalized polystyrene from polystyrene homopolymer by polymer‐modification reactions is discussed. Polystyrene homopolymer quantitatively functionalized at the para postion with diethyl oxomalonate functionality was subjected to a condensation reaction with urea and thiourea in the presence of sodium methoxide in methanol. This reaction proceeded essentially to quantitative conversion to the barbiturate‐ (BAPS) and thiobarbiturate‐functionalized polystyrenes (TBAPS) as estimated by ¹H NMR, UV, and IR spectroscopies. Thus, several copolymers of styrene with barbiturate‐ and thiobarbiturate‐functionalized styrene were synthesized. The detailed characterizations of quantitatively functionalized polystyrene using gel permeation chromatographic, IR, UV, and ¹H NMR spectroscopic techniques as well as thermogravimetric analysis are discussed. An application of the newly synthesized polymer in removing Cu(II) ions from aqueous solution is demonstrated. This is the first report on the synthesis of BAPS and TBAPS by the polymer‐modification route or otherwise. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 731–737, 2002; DOI 10.1002/pola.10154     

Poly(styrene‐co‐glycerol dimethacrylate): Synthesis,characterization, and application as a resin for gel‐phase peptide synthesis

An efficient cross‐linked polymer support for solid‐phase synthesis was prepared by introducing glycerol dimethacrylate cross‐linker to polystyrene network using free radical aqueous suspension polymerization. The support was characterized by various spectroscopic methods. Morphological feature of the resin was analyzed by microscopy. The polymerization reaction was investigated with respect to the effect of amount of cross‐linking agent, which in turn vary the swelling, loading, and the mechanical stability of the resin. The solvent uptake of the polymer was studied in relation to cross‐linking and compared with Merrifield resin. The stability of the resin was tested in different synthetic conditions used for solid‐phase peptide synthesis. Hydroxy group of the support was derivatized to chloro and then amino groups using different reagents and reaction conditions. Efficiency of the support was tested and compared with TentaGel? resin by following different steps involved in the synthesis of the 65–74 fragment of acyl carrier protein. The results showed that the poly(styrene‐co‐glycerol dimethacrylate) (GDMA‐PS) is equally efficient as TentaGel resin in peptide synthesis. The purity of the peptides was analyzed by HPLC and identities were determined by mass spectroscopy and amino acid analysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4382–4392, 2005