Thermal curing reaction of poly(glycidyl methacrylate) using photogenerated amines from oxime-urethane derivatives

Two oxime-urethane derivatives, benzophenone oxime N-cyclohexylurethane (1 ) and dibenzophenone oxime N,N′-hexamethylenediurethane (2 ), were used as photobase generators. Photolysis of these derivatives results in the formation of amines which induce cross-linking of poly(glycidyl methacrylate) (PGMA) upon heating. The bifunctional derivative 2 is more efficient than the monofunctional derivative 1 in inducing thermal cross-linking of PGMA, with a maximum degree of insolubilization increasing up to ca. 90%.     

Hydroaluminierung: Synthese,Struktur und Eigenschaften von 1‐Methyl‐cis‐1‐azonia‐5‐alabicyclo[3.3.0]octan und des Alan‐triallylamin‐Adduktes

Hydro‐Alumination: Synthesis, Structure, and Properties of 1‐Methyl‐ cis ‐1‐azonia‐5‐alabicyclo[3.3.0]octane and of the Alan‐triallylamine Adduct The alan‐N‐methyl‐diallylamine adduct ( I ) was obtained by the reaction of N,N‐diallyl‐methyl‐ammoniumchloride with LiAlH₄. Subsequently the reaction product was transformed by intramolecular hydro‐alumination reaction into bis(1‐methyl‐cis‐1‐azonia‐5‐alabicyclo[3.3.0]octane) ( II ). In contrast to I , the bis(alan‐triallylamine) adduct ( III ) does not undergo an analogous hydro‐alumination reaction. The compounds I , II and III were characterized by MS, IR, ¹H‐, ¹³C‐ and ²⁷Al‐NMR spectroscopy, and the X‐ray structures of II and III are reported and discussed.     

Novel pyridinium salts as cationic thermal and photoinitiators and their photosensitization properties

Novel pyridinium salts [N‐(α‐phenylbenzyl)‐, N‐(1‐naphthylmethyl)‐, or N‐cinnamyl p‐ or o‐cyanopyridinium hexafluoroantimonates] were synthesized by the reaction of p‐ or o‐cyanopyridine and the corresponding bromides followed by anion exchange with KSbF₆. These pyridinium salts polymerized epoxy monomers at lower temperatures than previously reported for N‐benzyl‐2‐cyanopyridinium hexafluoroantimonate. The o‐substituted pyridinium salts showed higher activity than the p‐substituted ones, and the crosslinked epoxy polymers cured with these initiators showed higher glass‐transition temperatures. These pyridinium salts photoinitiated radical polymerization as well as cationic polymerization. The photopolymerization was accelerated by the addition of aromatic ketones as photosensitizers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1037–1046, 2002     

Activity of SiDbCl in the Electrooxidation of Ascorbic Acid,Dopamine, and Uric Acid

Selective electroanalytical responses for ascorbic acid, dopamine and uric acid at a carbon modified electrode based on 3‐n‐propyl‐1‐azonia‐4‐azabicyclo[2.2.2]octane silsesquioxane chloride (SiDbCl) is reported. The overlapped peaks observed at an unmodified electrode are resolved into three well defined voltammetric peaks allowing the simultaneous determination of the three species. Detection limits of 37, 0.3 and 0.1 μmo L⁻¹ of ascorbic acid, dopamine and uric acid, respectively, were calculated from calibration curves based on differential pulse voltammetric experiments performed in Britton ‐ Robinson buffer solution at pH 7.04.     

Synthesis of polymers by template polymerization. I. Template polymerization of poly(methacrylic acid) with β‐cyclodextrin

A novel template monomer with multiple methacryloyl groups was synthesized with β‐cyclodextrin by the acetylation of primary hydroxyl groups and the esterification of secondary hydroxyl groups with methacrylic acid anhydride. The average number of methacryloyl groups in the monomer was 11. The radical polymerization of the monomer was carried out with the following initiators: α,α′‐azobisisobutylonitrile, H₂O₂? Fe²⁺ redox initiator, p‐xylyl‐N,N‐dimethyldithiocarbamate (XDC), and α‐bromo‐p‐xylyl‐N,N‐dimethyldithiocarbamate (BXDC). When the concentration of the monomer was less than 4.12 × 10^?3 M, polymerization was limited inside the molecule, and gelation of the system was hindered. For controlled radical photopolymerization with XDC and BXDC, the methacryloyl groups of the monomer were homogeneously polymerized, and poly(methacrylic acid) with a narrow molecular weight distribution was obtained by the hydrolysis of the polymerized products. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3539–3546, 2001     

Synergistic interaction of epoxides and N‐vinylcarbazole during photoinitiated cationic polymerization

A kinetic study was conducted of the independent photoinitiated cationic polymerization of a number of epoxide monomers and mixtures of these monomers with N‐vinylcarbazole. The results show that these two different classes of monomers undergo complex synergistic interactions with one another during polymerization. It was demonstrated that N‐vinylcarbazole as well as other carbazoles are efficient photosensitizers for the photolysis of both diaryliodonium and triarylsulfonium salt photoinitiators. In the presence of large amounts of N‐vinylcarbazole, the rates of the cationic ring‐opening photopolymerization of epoxides are markedly accelerated. This effect has been ascribed to a photoinitiated free‐radical chain reaction that results in the oxidation of monomeric and polymeric N‐vinylcarbazole radicals by the onium salt photoinitiators to generate cations. These cations can initiate the ring‐opening polymerization of the epoxides, leading to the production of copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3697–3709, 2000     

Five related N′‐(2,2,2‐trichloroethanimidoyl)benzene‐1‐carboximidamides

In the solid state, 4‐methoxy‐N′‐(2,2,2‐trichloroethanimidoyl)benzene‐1‐carboximidamide, C₁₀H₁₀Cl₃N₃O, (I), N′‐(2,2,2‐trichloroethanimidoyl)benzene‐1‐carboximidamide, C₉H₈Cl₃N₃, (II), 4‐chloro‐N′‐(2,2,2‐trichloroethanimidoyl)benzene‐1‐carboximidamide, C₉H₇Cl₄N₃, (III), 4‐bromo‐N′‐(2,2,2‐trichloroethanimidoyl)benzene‐1‐carboximidamide, C₉H₇BrCl₃N₃, (IV), and 4‐trifluoromethyl‐N′‐(2,2,2‐trichloroethanimidoyl)benzene‐1‐carboximidamide, C₁₀H₇Cl₃F₃N₃, (V), display strong intramolecular N—H...N hydrogen bonding across the chelate ring and also intramolecular N—H...Cl contacts. Additional intermolecular hydrogen bonds link the molecules into chains, double chains or sheets in all cases except for compound (V). For compound (II), there are three independent molecules per asymmetric unit.     

Synthesis of 7‐azabicyclo[2.2.1]heptane derivatives by transformation of tropinone

The bromination (CuBr₂, AcOEt/CHCI₃) plus Favorskii rearrangement (EtONa, EtOH) of N‐carbethoxytropinone ( 4 ), readily available from tropinone ( 3 ), affords mixtures of exo‐ and endo‐isomers of 2,7‐dicarbethoxy‐7‐azabicyclo[2.2.1]heptane ( 1b ) in variable and moderate chemical yield (maximum 37%). The bromination (Br₂, HBr/AcOH) reaction of compound 4 gives ethyl trans‐2,4‐dibromo‐3‐oxo‐8‐azabicyclo[3.2.1]octane‐8‐carboxylate ( 5 ) in 99% yield, a product that on Favorskii rearrangement (EtONa/EtOH) affords ethyl 2,2‐diethoxy‐3‐oxo‐8‐azabicyclo[3.2.1]octane‐8‐carboxylate in moderate yield ( 6 ) (52%).     

Kinetic characterization of a transient reaction by degeneration of the precursor mechanism: Application to the synthesis of 3,4‐diazabicyclo[4.3.0]‐ non‐2‐ene

The rate of the oxidation of N‐amino‐3‐azabicyclo[3.3.0]octane by chloramine has been studied by GC and HPLC between pH 10.5 and 13.5. The second‐order reaction exhibits specific acid catalysis. The formation of N,N′‐azo‐3‐azabicyclo[3.3.0]octane or 3,4‐diazabicyclo[4.3.0]non‐2‐ene is pH, concentration, and temperature dependent. In alkaline media, the exclusive formation of 3,4‐diazabicyclo[4.3.0]non‐2‐ene is observed. Kinetic studies show that the oxidation of N‐amino‐3‐azabicyclo[3.3.0]octane by chloramine is a multistep process with the initial formation of a diazene‐type intermediate, which is converted by hydroxide ions into 3,4‐diazabicyclo[4.3.0]non‐2‐ene. Because it was not possible to follow the rate of change of the intermediate concentration, to determine the kinetics of 3,4‐diazabicyclo[4.3.0]non‐2‐ene formation, a procedure based on the degeneration of the precursor process was adopted. An appropriate mathematical treatment allowed a quantitative interpretation of all the phenomena observed over the given pH interval. The activation parameters were determined. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 38: 327–338, 2006     

Photoinduced depolymerization of poly(olefin sulfone)s possessing photobase generator side‐chains: Effect of spacer‐chain length

Photoinduced depolymerization of poly(olefin sulfone)s possessing photobase generators in the side‐chain was investigated. Irradiation with UV light generated base on the side‐chains and induced depolymerization based on proton abstraction on the main‐chain. The effect of the length of the spacer chain, which connects the photobase‐generating moiety to the polymer main chain on the photoinduced depolymerization, also was investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3873–3880     

Rubbery wound closure adhesives. II. initiators for and initiation of 2‐octyl cyanoacrylate polymerization

The polymerization of 2‐octyl cyanoacrylate (OctCA) initiated by five N‐bases [N,N‐dimethyl‐p‐toluidine (DMT), pyridine (Pyr), triethyl amine (Et₃N), azobicyclo[2.2.2]octane (ABCO), and diazobicylo[2.2.2]octane (DABCO)] was investigated. Our main objective was to assess the suitability and relative reactivity of these initiators for neat OctCA polymerization as wound closure adhesives. Methodologies were developed to determine stir‐stop and set times of OctCA polymerization and to use these quantities to assess initiation reactivity. According to these studies Et₃N, ABCO, DABCO, and Pyr are most reactive initiators, while DMT is much less reactive. Polymerizations were much faster in the presence of small amounts of tetrahydrofuran than toluene, indicating solvent polarity effects. Initiator reactivity is discussed in terms of structural parameters. NMR and MALDI‐TOF analyses of low molecular weight P(OctCA) prepared with DMT did not show evidence for the expected aromatic head group proposed by earlier investigators, which suggests complex initiation mechanism. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1652–1659     

A polymeric photobase generator containing oxime–urethane groups: Crosslinking reaction and application to negative photoresist

A polymeric photobase generator containing oxime–urethane groups was prepared by copolymerization of methyl methacrylate and methacryloxyethyl benzophenoneoxime urethane, and its photo and thermal crosslinking reaction after irradiation was examined from the measurement of UV and IR absorption spectral changes, insoluble fraction, and molecular weight changes. The photo‐crosslinking reaction of the copolymer film was more efficient when irradiations were carried out with 310 nm UV light in the presence of benzophenone than with 254 nm UV light without the addition of benzophenone. The crosslinking reaction increased after postexposure baking (PEB), and this thermal crosslinking reaction mechanism was studied from the identification of the photolysis products of a model compound, benzophenoneoxime phenylurethane, by a high‐performance liquid chromatography. The results indicate that the thermal crosslinking reaction of the copolymer after PEB is due to the formation of urea‐type chemical bonds. Resist properties of the copolymer were examined from the measurement of normalized thickness and micropattern development. A negative tone image with a resolution of 2 μm was obtained with this copolymer, having a sensitivity (D) of 1200 mJ/cm² and contrast (γ_n) of 1.31, when irradiation was carried out with 310 nm UV light in the presence of benzophenone following chloroform development. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 975–984, 2004     

Efficient photoinduced In situ preparation of clay/poly(glycidyl methacrylate) nanocomposites using hydrogen‐donor silane

Clay/poly(glycidyl methacrylate) nanocomposites (clay/PGMA) were prepared by in situ radical photopolymerization using N,N‐dimethylaminopropyltrimethoxysilane(DMA)‐modified bentonite clay acting as hydrogen donor for benzophenone in solution. This initiating system permits to photopolymerize glycidyl methacrylate between the lamellae of the DMA‐modified clay. The approach provides exfoliated nanocomposites as judged by the measurements of X‐ray diffraction. However, a low fraction of persistent intercalated clay regions was visible by transmission electron microscopy. X‐ray photoelectron spectra analyses indicate that the nanocomposites have PGMA‐rich surface. The clay/PGMA nanocomposites can be readily dispersed in ethanol. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 800–808     

2,2,2‐trifluoroacetophenone‐based D‐π‐A type photoinitiators for radical and cationic photopolymerizations under near‐UV and visible LEDs

Two D‐π‐A‐type 2,2,2‐trifluoroacetophenone derivatives, namely, 4′‐(4‐( N,N‐diphenyl)amino‐phenyl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Ben) and 4′‐(4‐(7‐(N,N‐diphenylamino)‐9,9‐dimethyl‐9H‐fluoren‐2‐yl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Flu), are developed as high‐performance photoinitiators combined with an amine or an iodonium salt for both the free‐radical polymerization of acrylates and the cationic polymerization of epoxides and vinyl ether upon exposure to near‐UV and visible light‐emitting diodes (LEDs; e.g., 365, 385, 405, and 450 nm). The photochemical mechanisms are investigated by UV‐Vis spectra, molecular‐orbital calculations, fluorescence, cyclic voltammetry, photolysis, and electron‐spin‐resonance spin‐trapping techniques. Compared with 2,2,2‐trifluoroacetophenone, both photoinitiators exhibit larger redshift of the absorption spectra and higher molar‐extinction coefficients. PI‐Ben and PI‐Flu themselves can produce free radicals to initiate the polymerization of acrylate without any added hydrogen donor. These novel D‐π‐A type trifluoroacetophenone‐based photoinitiating systems exhibit good efficiencies (acrylate conversion = 48%–66%; epoxide conversion = 85%–95%; LEDs at 365–450 nm exposure) even in low‐concentration initiators (0.5%, w/w) and very low curing light intensities (1–2 mW cm^?2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1945–1954     

Direct synthesis of amphiphilic block copolymers from glycidyl methacrylate and poly(ethylene glycol) by cationic ring‐opening polymerization and supramolecular self‐assembly thereof

Amphiphilic block copolymers composed of a hydrophilic poly(ethylene glycol) (PEG) block and a hydrophobic poly(glycidyl methacrylate) (PGMA) block were synthesized through cationic ring‐opening polymerization with PEG as the precursor. The model reactions indicated that the reactivity of the epoxy groups was higher than that of the double bonds in the bifunctional monomer glycidyl methacrylate (GMA) under the cationic polymerization conditions. Through the control of the reaction time in the synthesis of block copolymer PEG‐b‐PGMA, a linear GMA block was obtained through the ring‐opening polymerization of epoxy groups, whereas the double bond in GMA remained unreacted. The results showed that the molecular weight of the PEG precursor had little influence on the grafting of GMA, and the PGMA blocks almost kept the same length, despite the difference of the PEG blocks. In addition, the PGMA blocks only consisted of several GMA units. The obtained amphiphilic PEG‐b‐PGMA block copolymers could form polymeric core–shell micelles by direct molecular self‐assembly in water. The crosslinking of the PGMA core of the PEG‐b‐PGMA micelles, induced by ultraviolet radiation and heat instead of crosslinking agents, greatly increased the stability of the micelles. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2038–2047, 2005     

Photobase generation from amineimide derivatives and their use for curing an epoxide/thiol system

The structural effects of amineimide derivatives on photobase generation and the use of the resultant base for thermal curing of an epoxide/thiol system are investigated. The results of UV spectral change and gas chromatographic‐mass spectrometric analysis indicated that amineimide derivatives undergo photolysis by UV irradiation and generate bases. The order of conversion of the photolysis for the functional groups introduced to amineimide derivatives was NO₂ > N(CH₃)₂ > CN > OCH₃ > H. By using aminimide derivatives with NO₂ and N(CH₃)₂ groups, the curing of the epoxide/thiol system was shifted to lower temperature after UV irradiation. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4045–4052, 2002     

Effective fixation of carbon dioxide into poly(glycidyl methacrylate) in the presence of pyrrolidone polymers

The homopolymer (PGMA) of glycidyl methacrylate (GMA) and the copolymer of GMA with N‐vinyl‐2‐pyrrolidone were prepared under radical conditions and employed for the fixation of CO₂ with LiBr as a catalyst, in which the oxirane groups were transformed into five‐membered cyclic carbonate groups. For the fixation of CO₂ into the oxirane groups on PGMA, poly(N‐vinyl‐2‐pyrrolidone), in which the catalyst was impregnated before the reaction, was found to be an effective additive. This was exploited for the reaction using the copolymer containing both the oxirane and pyrrolidone moieties. The oxirane groups on the copolymer were also converted readily to the cyclic carbonates through the fixation of CO₂. In such use of the pyrrolidone structures on the polymers, the fixation of CO₂ could be carried out effectively in a diluted chlorobenzene solution and also under solvent‐free conditions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4578–4585, 2005     

Three new quinuclidine‐based structures: second harmonic generation response for 1,2‐bis(1‐azoniabicyclo[2.2.2]octan‐3‐ylidene)hydrazine dichloride

The crystal structures of three quinuclidine‐based compounds, namely (1‐azabicyclo[2.2.2]octan‐3‐ylidene)hydrazine monohydrate, C₇H₁₃N₃·H₂O ( 1 ), 1,2‐bis(1‐azabicyclo[2.2.2]octan‐3‐ylidene)hydrazine, C₁₄H₂₂N₄ ( 2 ), and 1,2‐bis(1‐azoniabicyclo[2.2.2]octan‐3‐ylidene)hydrazine dichloride, C₁₄H₂₄N₄²⁺·2Cl^? ( 3 ), are reported. In the crystal structure of 1 , the quinuclidine‐substituted hydrazine and water molecules are linked through N—H…O and O—H…N hydrogen bonds, forming a two‐dimensional array. The compound crystallizes in the centrosymmetric space group P2₁/c. Compound 2 was refined in the space group Pccn and exhibits no hydrogen bonding. However, its hydrochloride form 3 crystallizes in the noncentrosymmetric space group Pc. It shows a three‐dimensional network structure via intermolecular hydrogen bonding (N—H…C and N/C—H…Cl). Compound 3 , with its acentric structure, shows strong second harmonic activity.     

A barium perchlorate complex with a lateral macrobicycle derived from 1,10‐di­aza‐15‐crown‐5 containing a phenol Schiff base spacer

In the crystal structure of (acetonitrile‐κN)[13‐methyl‐39‐oxido‐1,17,25‐tri­aza‐9‐azonia‐28,31,36‐trioxapentacyclo[23.8.5.1^11,15.0^3,8.0^18,23]nonatriaconta‐3,5,7,9,11,13,15(39),16,18,20,22‐un­decaene‐κ⁷N¹,N¹⁷,N²⁵,O²⁸,O³¹,O³⁶,O³⁹](perchlorato‐κ²O,O′)barium(II) perchlorate acetonitrile hemisolvate, [Ba(ClO₄)(C₂H₃N)(C₃₃H₄₀N₄O₄)]ClO₄·0.5CH₃CN, the barium(II) cation is asymmetrically situated in the macrobicyclic cavity and is bound to seven of the eight heteroatoms of the macrobicyclic ligand, to the N atom of an aceto­nitrile mol­ecule and to two O atoms of one perchlorate group. The azonia N atom is not coordinated to the barium(II) cation and is involved in an intramolecular hydrogen‐bonding interaction with the oxido O atom.     

Synthesis and characterization of grafted/crosslinked proton conducting membranes based on amphiphilic PVDF copolymer

A novel graft copolymer consisting of a poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) backbone and poly(glycidyl methacrylate) side chains, that is, P(VDF‐co‐CTFE)‐g‐PGMA, was synthesized through atom transfer radical polymerization (ATRP) using CTFE units as a macroinitiator. Successful synthesis and microphase‐separated structure of the polymer were confirmed by ¹H NMR, FTIR spectroscopy, and TEM. As‐synthesized P(VDF‐co‐CTFE)‐g‐PGMA copolymer was sulfonated by sodium bisulfite, followed by thermal crosslinking with sulfosuccinic acid (SA) via the esterification to produce grafted/crosslinked polymer electrolyte membranes. The IEC values continuously increased with increasing SA content but water uptake increased with SA content up to 10 wt %, above which it decreased again as a result of competitive effect between crosslinking and hydrophilicity of membranes. At 20 wt % of SA content, the proton conductivity reached 0.057 and 0.11 S/cm at 20 and 80 °C, respectively. The grafted/crosslinked P(VDF‐co‐CTFE)‐g‐PGMA/SA membranes exhibited good mechanical properties (>400 MPa of Young's modulus) and high thermal stability (up to 300 °C), as determined by a universal testing machine (UTM) and TGA, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1110–1117, 2010