Synthesis of chromophore‐embedded polyurethanes for electrooptical materials

We carried out the polyaddition of dye‐embedded diols with diisocyanates to obtain novel nonlinear optical (NLO) polyurethanes, where the NLO units were embedded in the polymer backbone. The obtained polymers showed high glass‐transition temperatures (138–184 °C) and thermal stability (temperature of 10% weight loss under nitrogen = 227–287 °C). The λ maximum of the polymers was 521–556 nm. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2620–2624, 2001     

Ferrocene‐based organophosphorus liquid–crystalline polymers: Synthesis and characterization

Ferrocene‐containing polyphosphate and phosphonate esters were synthesized by the solution polycondensation method. The structure of the polymers was confirmed using various spectroscopic techniques. The formation of two types of chain blocks was confirmed by ³¹P NMR spectroscopy. Hot stage optical polarized microscope (HOPM) analysis revealed that all the polymers have a liquid–crystalline property. The char yields of the synthesized similar polymers were much higher than those of nonphosphorus polymers already reported in the literature. DSC analysis confirmed our predictions over the liquid–crystalline property, glass‐transition temperature, isotropization temperature, and thermal stability of the polymers. The effects of substitution on the side chain, structure of the liquid‐–crystalline phase, and thermal stability of the polymers have also been discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2396–2403, 2001     

Synthesis and properties of vinyl‐terminated and silicon‐containing polysulfones and polyketones

4‐Fluorophenylsulfonylphenyl‐terminated polysulfone and 4‐fluorobenzoylphenyl ketone were prepared with bisphenol A and an excess of bis‐(4‐fluorophenyl)sulfone or 4,4′‐difluorobenzophenone, respectively, at 160 °C using potassium carbonate in N,N‐dimethylacetamide. The resulting polymers were reacted with 4‐hydroxystyrene to synthesize vinyl‐terminated polysulfones and ketones. The silicon‐containing polysulfones and ketones were prepared from the vinyl‐terminated polymer precursor and various H‐functional silanes or siloxanes. The synthesis of silicon‐containing polymers was achieved by hydrosilation with a rhodium catalyst. It was shown that the hydrosilation reaction proceeds with 55:45 chemoselectivity. The resulting polymers were investigated by ¹H NMR spectroscopy, DSC, and thermogravimetric analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2937–2942, 2001     

New poly(arylene ether)s with pendant phosphonic acid groups

Soluble brominated poly(arylene ether)s containing mono‐ or dibromotetraphenylphenylene ether and octafluorobiphenylene units were synthesized. The polymers were high molecular weight (weight‐average molecular weight = 115,100–191,300; number‐average molecular weight = 32,300–34,000) and had high glass‐transition temperatures (>279 °C) and decomposition temperatures (>472 °C). The brominated polymers were phosphonated with diethylphosphite by a palladium‐catalyzed reaction. Quantitative phosphonation was possible when 50 mol % of a catalyst based on bromine was used. The diethylphosphonated polymers were dealkylated by a reaction with bromotrimethylsilane in carbon tetrachloride followed by hydrolysis with hydrochloric acid. The polymers with pendant phosphonic acid groups were soluble in polar solvents such as dimethyl sulfoxide and gave flexible and tough films via casting from solution. The polymers were hygroscopic and swelled in water. They did not decompose at temperatures of up to 260 °C under a nitrogen atmosphere. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3770–3779, 2001     

Synthesis and characterization of novel crosslinkable polymers with a nonlinear optical chromophore as a pendant group

New crosslinkable polymers with a nonlinear optical (NLO) active chromophore as a pendant group were synthesized by condensation chain polymerization via palladium‐catalyzed carbon–carbon coupling reactions. The polymerization yields were almost quantitative between the diiodobenzene (DIB) and diethyldipropargyl malonate (DEDPM) or 4‐(dimethylamino)‐4′‐(6‐dipropargylacetoxypropylsulfonyl)stilbene (DASS‐6) monomers. To improve the molecular weight and mechanical properties of the NLO active polymer, we carried out the copolymerization with DIB and DASS‐6 with various feed ratios of DEDPM. The resulting polymers were soluble in organic solvents and spun‐cast onto indium tin oxide‐coated glass substrates to make thin films. The molecular structures of the resulting polymers were characterized with various instrumental methods to confirm the carbon–carbon coupling reactions between the DIB and diacetylene monomers. The absorption of the ultraviolet–visible spectrum of the resulting polymers was drastically reduced after thermal curing at 160 °C because of the crosslinking of the reactive acetylene group in the polymer backbone. The electrooptic coefficient (r₃₃) measured at 1.3 μm ranged from 7 to 15 pm/V. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4025–4034, 2001     

Rigid‐chain metallomesogenic polymers containing vanadyl or copper(II) ions coordinated in the main chain

Rigid‐chain metallomesogenic polymers containing Cu(II) or VO(II) were prepared and characterized. All the polymers were soluble and melted without decomposition. They showed a thermotropic liquid–crystal (LC) behavior, and the mesophases were invariably preserved for a long time at room temperature in a metastable condition, with respect to the semicrystalline state. The nature of the mesophases of the Cu(II)‐containing polymers was similar to that observed in analogous organic rigid‐chain polymers having long lateral alkyl chains packed as extended ribbons. The VO(II)‐containing polymers showed an LC polymorphism involving a smectic A and a nematic phase. For all the polymers in a smectic or smecticlike state at room temperature, X‐ray diffraction data suggested short mean distances among the metal ions arranged in layers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2342–2349, 2001     

Synthesis and properties of fluorene‐based fluorinated polymers

Fluorene‐based polymers containing various fluorinated benzene (fluorobenzene, p‐difluorobenzene, and tetrafluorobenzene) moieties were synthesized. In addition, perfluorooctylation of poly‐[(9,9‐dioctylfluorene‐2,7‐diyl)‐co‐(fluorene‐2,7‐diyl)] was carried out to afford fluorene‐based polymers with perfluorooctyl moiety at the 9‐position on the fluorene ring. To evaluate the effect of fluorine moiety, polymers containing nonfluorinated benzene moieties and nonfluorinated octyl groups were synthesized. The photoluminescence measurements indicated that all these polymers exhibited blue emission in solution, but a polymer containing a perfluorooctyl group did not emit in the film state. Polymers containing various fluorinated benzene moieties showed higher fluorescence quantum yields and thermal stability than those containing nonfluorinated benzene. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3143–3150, 2001     

Synthesis of polymers with isolated thiophene–arylidene–thiophene chromophores for enhanced and specific electron/hole transport

The synthesis of nine new polymers intended for future use in light‐emitting diodes is described. The polymers consist of alternating units of thiophene–arylidene–thiophene chromophores and saturated silicon‐containing spacers. The arylidene moieties include benzene‐1,4‐, 2,5‐dimethoxybenzene‐1,4‐, naphthalene‐1,4‐, anthracene‐9,10‐, pyridine‐2,5‐, pyridine‐2,6‐, N‐methylcarbazole‐3,6‐, 1,3,4‐oxadiazole‐2,5‐, and 4,4′‐dimethyl‐2,2′‐bithiazole‐5,5′‐. The syntheses involved dibromination of the central arene followed by Suzuki or Kumada cross‐coupling reactions with two thiophene units. Subsequent dilithiation and reaction with dihalosilylalkanes provided the polymers. Their optical properties, including ultraviolet–visible absorption and emission in solution, were comparable to those of the parent monomer units, and they possessed the physical characteristics of macromolecules. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 872–879, 2001     

A facile approach to prepare soluble side‐chain polyimides for second‐order nonlinear optics

A simple and generally applicable new synthetic method to prepare second‐order nonlinear optical (NLO) polyimides has been developed. In this approach, side‐chain‐substituted polyimides were synthesized via isocyanato‐terminated prepolymers prepared directly from NLO chromophore‐containing diols Disperse Red 19. Using this technique, the tedious synthesis of the classical diamine monomers and harsh imidization process associated with polyamic acid prepolymers are avoided. The resulting polymers possessed good solubility and high glass‐transition (171–211 °C) and thermal‐decomposition temperatures. The polymers also exhibited excellent film‐forming properties, and good optical‐quality films were easily obtained by spin coating. The second‐order NLO activities of the polymer films were also studied, and several factors that might determine the growth of the second‐order NLO activity were proposed. The polymers obtained exhibit a large second‐order NLO activity (34–52.5 pm/V at 1064 nm). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2189–2195, 2001     

Synthesis and properties of novel optically active polyimides

A facile synthesis of an optically active di‐isocyanate containing alkylene groups and a preformed imide structure is described. Polycondensation reactions of the prepared di‐isocyanate with pyromellitic dianhydride, benzophenone tetracarboxylic dianhydride, and hexafluoroisopropylidene diphthalic anhydride resulted in the preparation of optically active, thermally stable polyimides. The prepared monomer and polymers were characterized by conventional methods. Optical and physical properties of the polymers including thermal stability, thermal behavior, solution viscosity, and solubility behavior were studied. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 514–518, 2001     

Poly(pyridinium salt)s with stilbene or distyrylbenzene chromophores

A new series of poly(pyridinium salt)s that contained side stilbenyl groups or p‐distirylbenzene segments in the main chain were synthesized from the reactions of bis(pyrylium salts) with diamines. They were characterized by viscometry, Fourier transform infrared spectroscopy, NMR, X‐ray scattering, differential scanning calorimetry, thermomechanical analysis, ultraviolet–visible analysis, and luminescence spectroscopy. The polymers were amorphous and soluble in polar aprotic solvents such as dimethylacetamide, dimethylformamide, and dimethyl sulfoxide. The glass‐transition temperatures were in the range of 59–123 °C. These polymers had initial decomposition temperatures of 240–295 °C and afforded anaerobic char yields of 29–53% at 800 °C. Both the absorption and photoluminescence (PL) spectra of the polymers were studied, and the PL quantum yields in solution were determined. The polymers showed violet‐blue fluorescence in solution with PL maxima at 408–416 nm and violet‐green fluorescence in thin film with PL maxima at 454–523 nm. The structure of the diamine utilized for the preparation of the polymers did not influence their PL maxima. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2454–2462, 2001     

Synthesis and properties of alternating copolyamide‐imides based on 2,6‐bis(4‐aminophenoxy)naphthalene and comparison with its related isomeric polymers

A series of novel polyamide‐imides III containing 2,6‐bis(phenoxy)naphthalene units were synthesized by 2,6‐bis(4‐aminophenoxy)naphthalene and various bis(trimellitimide)s in N‐methyl‐2‐pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents through direct polycondensation. The polymers were obtained in quantitative yield with inherent viscosities up to 1.53 dL/g. Most of the polymers showed good solubility in NMP, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide and could be solution‐cast into transparent, flexible, and tough films. The films had tensile strengths of 84–111 MPa, elongations at break of 8–33%, and initial moduli of 2.2–2.8 GPa. Wide‐angle X‐ray diffraction revealed that most polymers III were amorphous. The glass‐transition temperatures of some of the polymers could be determined by differential scanning calorimetry traces, recorded at 247–290 °C. The polyamide‐imides exhibited excellent thermal stabilities and had 10% weight loss at temperatures in the range of 501–575 °C under nitrogen atmosphere. They left more than 57% residue even at 800 °C in nitrogen. A comparative study of some corresponding polyamide‐imides is also presented. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2591–2601, 2001     

Durable and refreshable polymeric N‐halamine biocides containing 3‐(4′‐vinylbenzyl)‐5,5‐dimethylhydantoin

A novel vinyl‐hydantoin monomer, 3‐(4′‐vinylbenzyl)‐5,5‐dimethylhydantoin, was synthesized in a good yield and was fully characterized with Fourier transform infrared (FTIR) and ¹H NMR spectra. Its homopolymer and copolymers with several common acrylic and vinyl monomers, such as vinyl acetate, acrylonitrile, and methyl methacrylate, were readily prepared under mild conditions. The polymers were characterized with FTIR and ¹H NMR, and their thermal properties were analyzed with differential scanning calorimetry studies. The halogenated products of the corresponding copolymers exhibited potent antibacterial properties against Escherichia coli, and the antibacterial properties were durable and regenerable. The structure–property relationships of the polymers were further discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3348–3355, 2001     

Aromatic poly(1,3,4‐oxadiazole)s and poly(amide‐1,3,4‐oxadiazole)s containing ether sulfone linkages

Polyhydrazides and poly(amide‐hydrazide)s were prepared from two ether‐sulfone‐dicarboxylic acids, 4,4′‐[sulfonylbis(1,4‐phenylene)dioxy]dibenzoic acid and 4,4′‐[sulfonylbis(2,6‐dimethyl‐1,4‐phenylene)dioxy]dibenzoic acid, or their diacyl chlorides with terephthalic dihydrazide, isophthalic dihydrazide, and p‐aminobenzhydrazide via a phosphorylation reaction or a low‐temperature solution polycondensation. All the hydrazide polymers were found to be amorphous according to X‐ray diffraction analysis. They were readily soluble in polar organic solvents such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylacetamide and could afford colorless, flexible, and tough films with good mechanical strengths via solvent casting. These hydrazide polymers exhibited glass‐transition temperatures of 149–207 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the solid state at elevated temperatures. Although the oxadiazole polymers showed a significantly decreased solubility with respect to their hydrazide prepolymers, some oxadiazole polymers were still organosoluble. The thermally converted oxadiazole polymers had glass‐transition temperatures of 217–255 °C and softening temperatures of 215–268 °C and did not show significant weight loss before 400 °C in nitrogen or air. For a comparative study, related sulfonyl polymers without the ether groups were also synthesized from 4,4′‐sulfonyldibenzoic acid and the hydrazide monomers by the same synthetic routes. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2271–2286, 2001     

Using carbon nanotubes to detect polymer transitions

Raman spectral shifts of single‐wall carbon nanotubes embedded in polymer systems were used to measure transitions in polymers. Glass‐transition temperatures and secondary transitions were observed, and Raman spectroscopic data were compared with dynamic mechanical tests for a thermosetting and a thermoplastic polymer. The data confirm that the Raman spectral response of carbon nanotubes embedded in polymers is sensitive to polymer transitions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1492–1495, 2001     

Hyperbranched polymers from propargyloxysilanes: New types of acetylenic resins

New hyperbranched polymers ( 1P – 3P ) from propargyloxysilanes ( 1 – 3 ) are described. The propargyloxysilanes were prepared from readily available reagents in 53–61% yields. The polymerizations were clean, one‐pot hydrosilylation processes catalyzed by Pt/C that were typically complete within 3 h. The polymers contained pendant acetylenic groups that underwent thermally induced crosslinking reactions. Heating the polymers to 1300 °C in flowing nitrogen resulted in weight losses ranging from 33 to 66%. Methyl substitution resulted in lower thermal stability. Further modification of the polymers was demonstrated by the reaction of 1P and 2P with phenylethynyldimethylsilane in the presence of a Pt catalyst. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3383–3391, 2001     

Synthesis and photochemical properties of novel multifunctional photopolymers with both pendant epoxy groups and phenacyl ester groups

Novel multifunctional photopolymers with both pendant epoxy groups and phenacyl ester groups were synthesized by the one‐pot method for the reaction of poly(methacrylic acid) with epibromohydrin; this was followed by a reaction with phenacylbromide with 1,8‐diazabicyclo‐[5.4.0]undecene‐7 as a condensation reagent. These esterification reactions proceeded smoothly and quantitatively under mild conditions. Moreover, the photochemical reactions of the resulting polymers were evaluated by UV and IR spectroscopy. The pendant phenacyl ester groups were photocleaved to give corresponding carboxyl groups, and then the produced carboxyl groups reacted with pendant epoxy groups. Furthermore, the baking process promoted a crosslinking reaction because of the addition reaction of epoxy groups with carboxyl groups after irradiation. It was also proven that the photochemical reactivity of the resulting polymers was affected by the structure of the phenacyl ester group. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 530–538, 2001     

FTIR, 13C NMR,and GPC analysis of high‐propylene content co‐ and terpolymers with ethylene and higher α‐olefins synthesized with EtInd2ZrCl2/MAO

This article reports the results of propylene/α‐olefin copolymerization and propylene/ethylene/α‐olefin terpolymerization using low concentrations (less than 5 mol %) of long α‐olefins such as 1‐octene, 1‐decene, and 1‐dodecene. Kinetics data are presented and discussed. The highest activity was found with the longest α‐olefin studied (1‐dodecene). A possible explanation is proposed for this and other characteristics of the polymers obtained. The effect of low‐ethylene contents (4 mol % in the gas phase) on the copolymerization of propylene/α‐olefins was also examined. The polymers synthesized were characterized by ¹³C NMR, gel permeation chromatography, DSC, Fourier transform infrared spectroscopy, and wide‐angle X‐ray scattering. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2005–2018, 2001     

Surface grafting of cobalt complexes on polymeric supports: Evidence for site isolation and applications to reversible dioxygen binding

Imprinted polymers were synthesized using the surface‐grafting technique with [Co(III) 1 (vpy)(dmap)]PF₆ { 1 , bis[2‐hydroxy‐4‐(4‐vinylbenzyloxy)benzaldehyde]ethylene‐diimine; vpy: 4‐vinylpyridine; dmap: N,N′‐dimethyl‐4‐aminopyridine} as the template. The metallated sites were probed using spectroscopic techniques including UV–vis, Fourier transform infrared, and electron paramagnetic resonance (EPR) spectroscopies to investigate the site architecture and isolation of the immobilized sites in the surface‐grafted polymers. EPR studies showed a distribution of four and five coordinated sites similar to the bulk copolymers, and the surface‐grafted polymer showed reversible binding to dioxygen in multiple cycles. Both results indicated site isolation in the surface‐grafted polymers analogous to the bulk polymers. Although the dioxygen binding in surface‐grafted polymers is reversible, the spin density decreases to 50% in the third cycle as opposed to bulk copolymers. This indicates that the sites are more heterogeneous and more exposed to the environment than the analogous sites in bulk copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 888–897, 2001     

Synthesis and properties of oxygen‐, methylene‐, and alkylene‐bridged poly(dithiafulvene)s

Polymerization by cycloaddition between aldothioketene and its alkynethiol tautomer (derived in situ from a diyne) leading to the formation of dithiafulvene unit‐linked polymers has been studied. Two aromatic diynes [bis(4‐ethynyldiphenyl)methane ( 1a ) and 4,4′‐diethynyldiphenyl ether) ( 1b )] were used as starting materials with the aim of obtaining non‐π‐conjugated methylene‐ and oxygen‐bridged aromatic poly(dithiafulvene)s. The poly(dithiafulvene) derived from bis(4‐ethynyldiphenyl)methane can be considered as an interesting precursor to a small band‐gap polymer having alternating aromatic and quinonoid moieties. Further, two aliphatic diynes [1,7‐octadiyne ( 3a ) and 1,9‐decadiyne ( 3b )] were subjected to cycloaddition polymerization to obtain aliphatic poly(dithiafulvene)s containing localized electron‐rich dithiafulvene units. The polymers obtained were characterized by IR, ¹H NMR, gel permeation chromatography, and cyclic voltammetry. The electron‐donating property of the polymers was evident from the charge‐transfer (CT) complex formation with an electron acceptor 7,7,8,8‐teracyanoquinodimethane. The CT complexes were characterized by IR, ¹H NMR, and ultraviolet–visible spectroscopies. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3593–3603, 2001