Synthesis and characterization of hyperbranched aromatic polyamide copolymers prepared from AB2 and AB monomers

A series of hyperbranched aromatic polyamide copolymers has been prepared and characterized from direct polycondensation of AB₂ and AB monomers. Structure of the monomers and the molar ratio of AB₂/AB showed strong influence on the properties of resulting copolymers. A small amount of AB₂ branching unit improved markedly the solubility of the resulting copolymer. Mark-Houwink parameters of the copolymers were essentially independent of the mole ratio of the monomers. The physical and mechanical properties of resulting copolymers were influenced not only by the mole ratio of monomers, but also by the structure of the monomers employed.     

Synthesis of hyperbranched polyphenylenes using aryl dichloride monomers by Suzuki polycondensation

Advanced microelectronic fabrication requires stable organic materials that can be used under extreme conditions such as high temperatures. In this study, hyperbranched polyphenylenes (HBPs) were synthesized as stable and soluble polymers via the Suzuki polycondensation of 2‐(3,5‐dichlorophenyl)‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane (Bpin‐Cl) and 3,5‐dichlorophenylboronic acid (BOH‐Cl) in the presence of palladium acetate and 2‐(2′,6′‐dimethoxybiphenyl) dicyclohexylphosphine (SPhos). Soluble polymers having an average molecular weight in the range of 11 000 to 31 000 g/mol were obtained through the polymerization of chloride monomers. The degree of branching was determined to be 50% through inverse‐gated decoupling ¹³C NMR measurements. The chloride‐terminated HBP showed a temperature of 402°C for 1% weight loss (T_d1%) after the sample was purified via precipitation from an N‐methyl‐2‐pyrrolidone (NMP) solution and then thermally treated at 260°C for 3 hours. This thermal stability is higher than that of the HBPs synthesized from the corresponding bromide monomers. Moreover, after heating at 260°C, the sample was found to be soluble in organic solvents. The chlorinated terminal groups played an important role in achieving good solubility after heating. This unique property is attractive for non‐volatile or temporary coating materials used in microelectronic fabrication.     

A convenient room temperature polycondensation toward hyperbranched AB2‐type all‐aromatic polyesters with phenol terminal groups

As a convenient alternative to the classical melt polycondensation the one‐pot solution polycondensation of suitable AB₂ monomers under mild conditions has been successfully adapted to hyperbranched all‐aromatic polyester with phenol terminal groups. The polymerization was performed in solution at room temperature directly using commercially available 3,5‐dihydroxybenzoic acid as monomer and 4‐(dimethylamino) pyridinium 4‐tosylate as catalyst to suppress the formation of N‐acylurea. Different carbodiimides as coupling agents were investigated to find the optimal esterification conditions. The polymers have been characterized extensively and were compared with their well‐known analogs synthesized in melt. The characterization was carried out by NMR spectroscopy, size exclusion chromatography, and asymmetric flow‐field flow fractionation as an alternative separation technique for multifunctional polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5158–5168, 2009     

Clickable 2,2-bis(hydroxymethyl)propionic acid-derived AB2 monomers: Hyperbranched polyesters through the CuAAC cycloaddition (click) reaction

We present the synthesis and characterization of two aliphatic AB₂ monomers derived from the readily available 2,2-bis(hydroxymethyl)propionic acid and containing one alkyne group and two azide functionalities. The distance between the polymerizable groups differs in the two monomers by the insertion of an additional carbon atom in the aliphatic structure that addresses the steric demand during polymerization. The synthetic procedure for the monomers is relatively simple and scalable, and the monomers are able to polymerize through the Copper(I)-catalyzed Azide-Alkyne Cycloaddition (CuAAC reaction). The polymerization affords hyperbranched polymers in good yields and molecular weights and moderate degrees of branching. Copyright © 2021 John Wiley & Sons, Ltd.     

Synthesis of ordered polymer by direct polycondensation. VIII. Ordered polymer from two nonsymmetric monomers

The ordered (-aacdbbdc-) polymer was prepared by the direct polycondensation of a pair of symmetric monomers (XabX), 4,4′-(oxydi-p-phenylene)dibutanoic acid (XaaX) and 2-methoxyisophthalic acid (XbbX), with a nonsymmetric monomer (YcdY), 4-aminobenzhydrazide, using the condensing agent diphenyl (2,3-dihydro-2-thioxo-3-benzoxazolyl)phosphonate ( 1 ). The polymerization was carried out by a one-pot procedure, that is, mixing the dicarboxylic acids, condensing agent 1 and triethylamine in NMP for 2 h at room temperature, followed by the addition of 4-aminobenzhydrazide. This polymerization proceeded smoothly, yielding the ordered polymer with an inherent viscosity of 0.34 dL g⁻¹. The microstructure of the ordered polymer was confirmed by comparing the authentic ordered polymer in their ¹³C-NMR spectrum. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2309–2314, 1998     

Synthesis of hyperbranched poly(ether nitrile)s by one‐step polycondensation of an AB2 monomer

Hyperbranched poly(ether nitrile)s were prepared from a novel AB₂ type monomer, 2‐chloro‐4‐(3,5‐dihydroxyphenoxy)benzonitrile, via nucleophilic aromatic substitution. Soluble and low‐viscous hyperbranched polymers with molecular weights upto 233,600 (M_w) were isolated. According to the ¹H NMR and GPC data, the unique polymerization behavior was observed, which implies that the weight average molecular weight increased after the number average molecular weight reached plateau region. Model compounds were prepared to characterize the branching structure. Spectroscopic measurements of the model compounds and the resulting polymers, such as ¹H, DEPT ¹³C NMR, and MS, strongly suggest that the ether exchange reaction and cyclization are involved in the propagation reaction. The side reactions would affect the unique polymerization behavior. The resulting polymers showed a good solubility in organic solvents similar to other hyperbranched aromatic polymers. The hydroxy‐terminated polymer was even soluble in basic water. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5835–5844, 2009     

Blends of different linear polyamides with hyperbranched aromatic AB2 and A2 + B3 polyesters

To explore the possible applications of hyperbranched polymers for modifying linear polyamides, two hyperbranched aromatic polyesters characterized as high T_g polymers possessing phenolic end groups were used in melt mixing with partly aromatic polyamide and commercially available aliphatic polyamide‐6, respectively. Different amounts of both hyperbranched polyesters (from 1 wt % up to 20 wt %) were added to the polyamides, and the influence of these hyperbranched polyesters on the properties of the polyamides was investigated. The hyperbranched polyester based on an AB₂ approach was found to be the most effective modifier. A significant increase of the glass transition temperature of the final blend was detected. However, a remarkable reduction of crystallinity as well as complex melt viscosity of those blends was also observed. The use of an A₂+B₃ hyperbranched polyester as melt modifier for the polyamides was less effective for changing the thermal properties, and the complex melt viscosity of the final material increased since heterogeneous blends were formed. In contrast to that, generally, the addition of the AB₂ hyperbranched polyester to the polyamides resulted in homogeneous blends with improved T_g and processability. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3558–3572, 2009     

Chemoselective synthesis of polyamides containing hydroxyl and amino substituents by direct polycondensation

A convenient method for the synthesis of polyamides containing hydroxyl and amino substituents on the aromatic rings of the backbones was developed. These polymers were prepared readily by the chemoselective polycondensation of dicarboxylic acids with diamines with hydroxyl and amino functional groups via the activating agent diphenyl(2,3‐dihydro‐2‐thioxo‐3‐bezoxazolyl)phosphonate. The model reactions were studied in detail to demonstrate the feasibility of chemoselective polycondensation. The direct polycondensation of 5‐hydroxy or 5‐aminoisophthalic acid with 4,4′‐diamino‐4″‐hydroxytriphenylmethane proceeded smoothly under mild conditions and produced the desired polyamides with inherent viscosities up to 0.73 dL · g⁻¹. The polymers obtained were characterized by IR, ¹H NMR, and ¹³C NMR spectroscopies. The polymers were readily soluble in aprotic polar solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethyl formamide, and dimethyl sulfoxide. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3875–3882, 2000     

Synthesis and characterization of a novel AB2 monomer and corresponding hyperbranched poly(arylene ether phosphine oxide)s

A novel AB₂ monomer, 4‐(fluorophenyl)‐4′,4″‐(bishydroxyphenyl) phosphine oxide, was synthesized. The monomer was successfully polymerized to a modest molecular weight with various catalysts, including K₂CO₃ and Cs₂CO₃/Mg(OH)₂. Hyperbranched polymers exhibited exceptionally high thermal stability and solubility in conventional polar organic solvents and basic water solutions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3736–3741, 2000     

Synthesis and properties of hyperbranched poly(ether sulfone)s prepared by self‐polycondensation of novel AB2 monomer

Hyperbranched poly(ether sulfone)s were prepared by the self‐polycondensation of the novel AB₂ monomer, 4‐(3,5‐hydroxyphenoxy)‐4′‐fluorodiphenylsulfone. The high‐molecular‐weight polymers were isolated in good yields. The degree of branching (DB) of the resulting polymers was investigated by the preparation of dendritic and linear model compounds. The DB determined by gated decoupling ¹³C NMR measurements was in the range 0.17–0.41 and was dependent on the base used for the self‐polycondensation. It was found that cesium fluoride was an effective base to form the polymer having the DB of 0.41. The resulting hyperbranched poly(ether sulfone)s showed good solubility in organic solvents. The solubility and the glass transition temperature of the polymers were influenced by the terminal functional groups. The unique thermal crosslinking phenomenon was observed during the DSC measurements of the hydroxyl‐terminated hyperbranched poly(ether sulfone) under air condition. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of novel hyperbranched polybenzimidazoles based on an AB2 monomer containing four amino groups and one carboxylic group

A new kind of AB₂ monomer, 4‐[2,6‐bis(3,4‐diaminophenyl)pyridin‐4‐yl]benzoic acid, was synthesized, and several hyperbranched polybenzimidazoles (HPBIs) were prepared through self‐polymerization followed by modification reactions with end‐capping reagents such as 4‐methyl benzoic acid and 3‐[3,5‐bis(trifluoromethyl)phenoxy] benzoic acid. The HPBIs had good solubility in strongly aprotic solvents, such as N‐methyl‐2‐pyrrolidone, N,N′‐dimethylformamide, N,N′‐dimethylacetamide, and dimethyl sulfoxide. They also exhibited excellent thermal properties, with glass‐transition temperatures of 318–381 °C and 10% weight loss in the range of 338–674 °C in nitrogen and 329–509 °C in air. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5729–5739, 2006     

Poly(arylether amides) and poly(aryletherketone amides) via aromatic nucleophilic substitution reactions of self‐polymerizable AB and AB2 monomers

Two new extended self‐polymerizable AB monomers, N‐(4‐fluorobenzoyl)‐4‐amino‐4′‐hydroxydiphenylether and N‐(4‐fluorobenzoyl)‐4‐amino‐4′‐hydroxybiphenyl, were prepared. The monomers were homopolymerized and copolymerized to high‐molecular‐weight, linear poly(arylether amides) in N‐methylpyrrolidone (NMP)/toluene in the presence of potassium carbonate at elevated temperature. The polymers retained NMP up to 200 °C. Samples containing small amounts of the solvent (5–10 wt %) were soluble in polar aprotic solvents. However, after complete removal of the NMP, the polymers were only soluble in strong acids such as sulfuric acid and methanesulfonic acid (MSA). The polymers, which had intrinsic viscosities of 0.57–1.49 dL/g (30.1 ± 0.1 °C in MSA), were semicrystalline with melting temperatures above 400 °C. Two new self‐polymerizable AB₂ amide monomers, N,N′‐bis(4‐fluorobenzoyl)‐3,4‐diamino‐4′‐hydroxydiphenylether and N,N′‐bis(4‐fluorobenzoyl)‐3,5‐diamino‐4′‐hydroxybenzophenone, were also prepared and polymerized to give a hyperbranched poly(arylether amide) and a hyperbranched poly(aryletherketone) amide. The arylfluoride‐terminated, amorphous polymers had intrinsic viscosities of 0.34 and 0.24 dL/g (30.0 ± 0.1 °C in m‐cresol), glass‐transition temperatures of 210–269 °C, and were soluble in a wide variety of organic solvents. Matrix‐assisted laser desorption/ionization time‐of‐flight analysis indicated that the components of the low‐molecular‐weight fractions contained cyclic structures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2374–2389, 2003     

Enhancement of a hyperbranched charring and foaming agent on flame retardancy of polyamide 6

A hyperbranched polyamine was prepared using an A₂ + B₃ approach. It acted as a hyperbranched charring and foaming agent (HCFA) in combination with ammonium polyphosphate (APP) to form a new intumescent flame retardant (IFR) system for polyamide 6 (PA6). Effect of HCFA on flame retardant and thermal degradation properties of IFR‐PA6 was investigated by limiting oxygen index (LOI), UL‐94 vertical burning, cone calorimeter, and thermogravimetric analysis (TGA) tests. The IFR system presented the most effective flame retardancy in PA6 when the weight ratio of APP to HCFA was 2:1. The LOI value of IFR‐PA6 could reach 36.5 with V‐0 rating when the IFR loading was 30 wt%. Even if the loading decreased to 25 wt%, IFR‐PA6 could still maintain V‐0 rating with an LOI value of 31. TGA curves indicated that APP would interact with both PA6 and HCFA in PA6/APP/HCFA composite under heating. The interaction between APP and HCFA improved the char formation ability of IFR system and then much more char was formed for PA6/APP/HCFA composite than for PA6/APP. Therefore, better flame retardancy was achieved. Moreover, the structure and morphology of char residue were studied by Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The results indicated that compact and foaming char layer containing P‐O‐C structure was formed for PA6/APP/HCFA system during combustion. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and properties of long‐chain branched poly(ether sulfone)s by self‐polycondensation of AB2 type macromonomers

Long‐chain branched poly(ether sulfone)s (PESs) were synthesized via self‐polycondensation of AB₂ macromonomers. The linear PES oligomers synthesized by self‐polycondensation of 4‐chloro‐4′‐(4‐hydroxyphenyloxy)diphenyl sulfone were terminated with 4‐(3,5‐methoxyphenoxy)‐4′‐fluorodiphenyl sulfone to form AB₂ macromonomer precursors. After conversion from methoxy to hydroxy groups, the AB₂ macromonomers were self‐polycondensed to form long‐chain branched PESs. NMR measurements support the formation of the target macromonomers ( = 2930–67,800 (g mol^?1); M_n = number average molecular weight) and long‐chain branched PESs. Gel permeation chromatography with multiangle light scattering measurements indicated the formation of high‐molecular‐weight (M_w) polymers over 10⁴. The root‐mean‐square radius of gyration (R_g) suggests that the shape of the long‐chain branched PES synthesized from small AB₂ macromonomers in solution is similar to that of hyperbranched polymers. Increasing resulted in larger R_g, suggesting a transition from hyperbranched to a linear‐like architecture in the resulting long‐chain branched PESs. Rheological measurements suggested the presence of strongly entangled chains in the long‐chain branched PES. Higher tensile modulus and smaller elongation at the break were observed in the tensile tests of the long‐chain branched PESs. It is assumed that the enhanced molecular entanglement points may act as physical crosslinks at room temperature. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1825–1831     

Preparation of hyperbranched macromolecules with aryl fluoride and phenol terminal functionalities using new monomers and Cs2CO3 or Mg(OH)2 as the condensation agent

New A₂B monomers were synthesized for preparation of hyperbranched aryl ether sulfone macromolecules with aryl fluoride and phenol terminal functionalities. The macromolecules, which possess high thermal stability, were prepared using the divergent approach. A masked phenol with two aryl fluoride groups and a bisphenol with an aryl fluoride group were the monomers used to synthesize these polymers. In both cases, the aryl fluoride group is activated by a sulfone moiety. The synthetic method used for the preparation of the hyperbranched macromolecules gave a fast reaction and a high yield. These methods include, e.g., the use of Cs₂CO₃ and Mg(OH)₂ to generate the phenolate ion in situ. Use of the latter results in the formation of insoluble magnesium fluoride. The best conditions for the reaction utilized the more active nucleophilic polycondensation agent, Cs₂CO₃, and an aryl carbonate as a masked phenol. NMR, SEC, and MALDI-TOF-MS were used to characterize the samples. MALDI-TOF-MS allowed us to identify the different oligomeric species present, and it also indicated that an internal cyclization competes with the polymerization. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2015–2033, 1997     

Controlling the formation of long‐subchain hyperbranched polystyrene from seesaw‐type AB2 macromonomers: Solvent polarity and solubility

Through atom transfer radical polymerization of styrene with 1,3‐dibromomethyl‐5‐propargyloxy‐benzene as initiator followed by the conversion of bromine end‐groups into azide end‐groups, well‐defined seesaw‐type polystyrene (PSt) macromonomers with two molecular weights (M_n = 8.0 and 28.0 k) were obtained. Thus, a series of long‐subchain hyperbranched (lsc‐hp) PSt with high overall molar masses and regular subchain lengths were obtained via copper‐catalyzed azide–alkyne cycloaddition click chemistry performed in THF and DMF, respectively. The polycondensation of seesaw‐type macromonomers was monitored by gel permeation chromatography. Because DMF is the reaction medium with higher polarity, click reaction proceeds more easily in DMF. Therefore, the growth of lsc‐hp PSt in DMF has faster rate than that in THF for the shorter seesaw‐type macromonomer (Seesaw‐8k). However, THF is the solvent with better solubility to PSt and leads to looser conformation of PSt chains. Thus, for the longer seesaw macromonomer (Seesaw‐28k), lsc‐hp PSt in THF has higher overall molar mass. As well, the self‐cyclization of seesaw‐type macromonomers also depends on both solvent and molar mass of macromonomer. The self‐cyclization degrees of Seesaw‐8k in DMF and THF are almost the same while that of Seesaw‐28k macromonomer is obviously lower in THF. The experimental results suggest a physical consideration to control the growth of hyperbranched polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of hyperbranched aromatic poly(ether imide)s with terminal amino groups

We synthesized an AB₂‐type monomer, 4‐{4‐[di(4‐aminophenyl)methyl]phenoxy}phthalic acid, which contained one phthalic acid group and two aminophenyl functionalities. The direct self‐polycondensation of the AB₂‐type monomer in the presence of triphenylphosphite as an activator afforded a hyperbranched poly(ether imide) with a large number of terminal amino groups. This polymer was characterized with ¹H NMR and IR spectroscopy. The degree of branching of the hyperbranched poly(ether imide) was approximately 56%, as determined by a combination of model compound studies and an analysis of ¹H NMR spectroscopy integration data. The terminal amino groups underwent functionalization readily. The solubility and thermal properties of the resulting polymers depended on the nature of the chain end groups. In addition, the hyperbranched poly(ether imide) was grafted with polyhedral oligomeric silsesquioxane (POSS). Transmission electron microscopy analysis revealed that the grafted POSS molecules aggregated to form a nanocomposite material. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3726–3735, 2003     

Facile synthesis of hyperbranched poly(p‐phenyleneethynylene‐alt‐m‐phenyleneethynylene) with narrow dispersity and high branching degree by sonogashira polymerization of an AB2 monomer

An AB₂ monomer PhBr₂  C  C  Ph  C  CH containing one acetylene group and two bromide groups was efficiently synthesized by a strategy based on the different reactivity between aromatic iodide and bromide in Sonogashira reaction. The Sonogashira polymerization of PhBr₂  C  C  Ph  C  CH was investigated to get hyperbranched poly(p‐phenyleneethynylene‐alt‐m‐phenyleneethynylene) (hb‐PMPE) in terms of the effects of monomer addition method, core molecule with different functionality, and ratio of [monomer]/[core molecule]. The results showed that narrow dispersities (D) (D: 1.23∼1.50) were obtained by slow monomer addition and with core molecule. Bifunctional core molecule induced narrower dispersity than monofunctional core molecule. The molecular weight of hb‐PMPE increased with increasing ratio of [monomer]/[core molecule], however, a negative deviation from calculated value was observed. The dispersity slightly increased with increasing [monomer]/[core molecule]. When the ratio of [monomer]/[core molecule] was below 50/1, monomodal distribution was observed; whereas when the ratio increased to 70/1, bimodal distribution was obtained. All the polymers showed degrees of branching (DBs) around 0.6. The hb‐PMPEs showed one major absorption band with λ_max around 330 nm, and emission band with λ_max around 390 nm. All the polymers showed relative quantum yields (Φ_r) above 0.5 in dilute THF solution. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 96–104