Decomposition of model alkoxyamines in simple and polymerizing systems. II. Diastereomeric N‐(2‐methylpropyl)‐N‐(1‐diethyl‐phosphono‐2,2‐dimethyl‐propyl)‐aminoxyl‐based compounds

Thermal reactions of the alkoxyamine diastereomers DEPN‐R′ [DEPN: N‐(2‐methylpropyl)‐N‐(1‐diethylphosphophono‐2,2‐dimethyl‐propyl)‐aminoxyl; R′: methoxy‐carbonylethyl and phenylethyl] with (R,R) + (S,S) and (R,S) + (S,R) configurations have been investigated by ¹H NMR at 100 °C. During the overall decay the diastereomers interconvert, and an analytical treatment of the combined processes is presented. Rate constants are obtained for the cleavage and reformation of DEPN‐R′ from NMR, electron spin resonance, and chemically induced dynamic nuclear polarization experiments also using 2,2,6,6‐tetramethylpiperidinyl‐1‐oxyl (TEMPO) as a radical scavenger. The rate constants depend on the diastereomer configuration and the residues R′. Simulations of the kinetics observed with styrene and methyl methacrylate containing solutions yielded rate constants for unimeric and polymeric alkoxyamines DEPN‐(M)_n‐R′. The results were compatible with the known DEPN mediation of living styrene and acrylate polymerizations. For methyl methacrylate the equilibrium constant of the reversible cleavage of the dormant chains DEPN‐(M)_n‐R′ is very large and renders successful living polymerizations unlikely. Mechanistic and kinetic differences of DEPN‐ and TEMPO‐mediated polymerizations are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3264–3283, 2002     

Synthesis and characterization of amphiphilic heterograft copolymers with PAA and PS side chains via “Grafting from” approach

The amphiphilic heterograft copolymers poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate)‐graft‐(poly(acrylic acid)/polystyrene) (P(MMA‐co‐BIEM)‐g‐(PAA/PS)) were synthesized successfully by the combination of single electron transfer‐living radical polymerization (SET‐LRP), single electron transfer‐nitroxide radical coupling (SET‐NRC), atom transfer radical polymerization (ATRP), and nitroxide‐mediated polymerization (NMP) via the “grafting from” approach. First, the linear polymer backbones poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate) (P(MMA‐co‐BIEM)) were prepared by ATRP of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) and subsequent esterification of the hydroxyl groups of the HEMA units with 2‐bromoisobutyryl bromide. Then the graft copolymers poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate)‐graft‐poly(t‐butyl acrylate) (P(MMA‐co‐BIEM)‐g‐PtBA) were prepared by SET‐LRP of t‐butyl acrylate (tBA) at room temperature in the presence of 2,2,6,6‐tetramethylpiperidin‐1‐yloxyl (TEMPO), where the capping efficiency of TEMPO was so high that nearly every TEMPO trapped one polymer radicals formed by SET. Finally, the formed alkoxyamines via SET‐NRC in the main chain were used to initiate NMP of styrene and following selectively cleavage of t‐butyl esters of the PtBA side chains afforded the amphiphilic heterograft copolymers poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate)‐graft‐(poly(t‐butyl acrylate)/polystyrene) (P(MMA‐co–BIEM)‐g‐(PtBA/PS)). The self‐assembly behaviors of the amphiphilic heterograft copolymers P(MMA‐co–BIEM)‐g‐(PAA/PS) in aqueous solution were investigated by AFM and DLS, and the results demonstrated that the morphologies of the formed micelles were dependent on the grafting density. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Factors influencing the C?ON bond strength of the alkoxyamines in the styrene–acrylonitrile–TEMPO copolymerization system

Homolytic bond dissociation energy (BDE) of the (C? ON) bond for several N‐alkoxyamines derived from 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) and the corresponding (C? H) bonds were determined from quantum‐mechanical calculations including the B3‐LYP6‐31G(d), B3‐LYP/6‐311++G(2df,p), UB3‐LYP/6‐311+G(3df,2p), and integrated IMOMO (G3:ROMP2/6‐31G(d)) method. The investigated N‐alkoxyamines were considered as models for dormant forms of propagating chains in the radical copolymerization process of styrene with acrylonitrile in the presence of TEMPO according to the terminal and penultimate model. The substituent effect on BDE was investigated. Radical stabilization energies (RSE) for radicals created from homolysis of the investigated N‐alkoxyamines were calculated according to Rüchardt's method. Polar, steric, and stabilization effects on C? ON alkoxyamine bond homolysis were studied. A dramatically weakened C? ON bond in the alkoxyamine‐containing two consecutive styrene units in the propagating chain was ascribed to geometric parameters characterizing energetically unfavorable conformation of the substituents. These phenomena can be regarded as the penultimate effect in the radical living/controlled copolymerization system of styrene with acrylonitrile. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1165–1177, 2008     

Synthesis of well‐defined multigraft copolymers by a two‐step living radical polymerization with nitroxyl‐functionalized poly(methyl methacrylate)

Novel multigraft copolymers of poly(methyl methacrylate‐graft‐polystyrene) (PMMA‐g‐PS) in which the number of graft PS side chains was varied were prepared by a subsequent two‐step living radical copolymerization approach. A polymerizable 4‐vinylbezenyl 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) monomer (STEMPO), which functioned as both a monomer and a radical trapper, was placed in a low‐temperature atom transfer radical polymerization (60°C) process of methyl methacrylate with ethyl 2‐bromopronionate (EPNBr) as an initiator to gain ethyl pronionate‐capped prepolymers with TEMPO moieties, PMMA‐STEMPOs. The number of TEMPO moieties grafted on the PMMA backbone could be designed by varying STEMPO/EPNBr, for example, the ratios of 1/2, 2/3, or 3/4 gained one, two, or three graft TEMPO moieties, respectively. The resulting prepolymers either as a macromolecular initiator or a trapper copolymerized with styrene in the control of stable free‐radical polymerization at an elevated temperature (120 °C), producing the corresponding multigraft copolymers, PMMA‐g‐PSs. The nitroxyl‐functionalized PMMA prepolymers produced a relatively high initiation efficiency (>0.8) as a result of the stereohindrance and slow diffusion of TEMPO moieties connected on the long PMMA backbone. The polymerization kinetics in two processes showed a living radical polymerization characteristic. The molecular structures of these prepolymers and graft copolymers were well characterized by combining Fourier transform infrared spectroscopy, gel permeation chromatography, chemical element analysis, and ¹H NMR. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1876–1884, 2002     

Controlled/living polymerization of methyl methacrylate using new sterically hindered imidazoline nitroxides prepared via intramolecular 1,3‐dipolar cycloaddition reaction

A series of imidazoline nitroxides with bulky spirocyclic moieties at the positions 2 or 5 of imidazole ring were synthesized using intramolecular 1,3‐dipolar cycloaddition in 2H‐imidazole 1‐oxides or 4H‐imidazole 3‐oxides with pent‐4‐enyl groups followed by isoxazolidine ring opening and oxidation. Capability of the nitroxides to control radical polymerization of methyl methacrylate (MMA) and styrene was investigated. For that purpose, alkoxyamines were synthesized from the aforementioned nitroxides and tert‐butyl α‐bromoisobutyrate. Homolysis rate constants of the alkoxyamines were measured and possible contributions of side reactions were quantified. Nitroxide‐mediated polymerization of styrene and MMA was studied using the alkoxyamines as initiators. MMA polymerization was found to proceed in controlled regime up to 55% of monomer conversion and the polymer obtained was able to reinitiate the polymerization of styrene. Quota of “living” chains estimated to reach 90%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 929–943     

Polymerization of o‐quinodimethanes. IV. Radical polymerization of 1‐cyano‐o‐quinodimethane in the presence of TEMPO

The radical polymerization behavior of 1‐cyano‐o‐quinodimethane generated by thermal isomerization of 1‐cyanobenzocyclobutene in the presence of 2,2,6,6‐tetramethylpiperidine‐N‐oxide (TEMPO) and the block copolymerization of the obtained polymer with styrene are described. The radical polymerization of 1‐cyanobenzocyclobutene was carried out in a sealed tube at temperatures ranging from 100 to 150 °C for 24 h in the presence of di‐tert‐butyl peroxide (DTBP) as a radical initiator and two equivalents of TEMPO as a trapping agent of the propagation end radical to obtain hexane‐insoluble polymer above 130 °C. Polymerization at 150 °C with 5 mol % of DTBP in the presence of TEMPO resulted in the polymer having a number‐average molecular weight (M_n ) of 2900 in 63% yield. The structure of the obtained polymer was confirmed as the ring‐opened polymer having a TEMPO unit at the terminal end by ¹H NMR, ¹³C NMR, and IR analyses. Then, block copolymerization of the obtained polymer with styrene was carried out at 140 °C for 72 h to give the corresponding block copolymer in 82% yield, in which the unimodal GPC curve was shifted to a higher molecular weight region. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3434–3439, 2000     

Nitroxide‐mediated living free‐radical polymerization of styrene: A systematic study of the variation of the alkoxyamine concentration

The effect of the variation of the alkoxyamine concentration on the conversion and polydispersity of the nitroxide‐mediated living free‐radical polymerization of styrene is discussed. Four different alkoxyamines ( 1 – 4 ) have been used for these studies. For an alkoxyamine with a small equilibrium rate constant (K), such as styryl–TEMPO 2 , the conversion is governed by the autopolymerization of styrene. For efficient alkoxyamines 1 , 3 , and 4 , the conversion at high alkoxyamine concentrations is higher than the conversion obtained by autopolymerization. At high alkoxyamine concentrations, the conversions vary to a small extent for all the alkoxyamines studied. As long as the conversion remains high, the polydispersity index is small. In addition, simulations of polymerizations with a program for modeling nonlinear dynamics are discussed. Polymerizations with efficient alkoxyamines at high alkoxyamine concentrations are well described by the kinetic scheme applied. K for alkoxyamines 1 and 4 has been estimated with the simulations. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3342–3351, 2004     

Syntheses of 12‐arm star polymers and star diblock copolymers by nitroxide‐mediated radical polymerization using dendritic dodecafunctional macroinitiators

Dendritic multifunctional macroinitiators having 12 TEMPO‐based alkoxyamines were prepared by the reaction of a benzyl alcohol having 4 TEMPO‐based alkoxyamines with 1,3,5‐tris[(4‐chlorocarbonyl)phenyl]benzene and 1,3,5‐tris(4‐isocyanatophenyl)benzene. Using the dodecafunctional macroinitiators, TEMPO‐mediated radical polymerizations of styrene (St) were carried out at 120 °C, and 12‐arm star polymers ( star‐12 ) with narrow polydispersities of M_w/M_n = 1.06–1.26 were obtained. To evaluate the livingness for the TEMPO‐mediated radical polymerizations of St, hydrolysis of the ester bonds of the 12‐arm star polymers and subsequent SEC measurements were carried out. Furthermore, using star‐12 as the macroinitiator, TEMPO‐mediated radical polymerization of 4‐vinylpyridine (4‐VP) was carried out, and well‐defined poly(St)‐b‐poly(4‐VP) 12‐arm star diblock copolymers with M_w/M_n = 1.18–1.19 were obtained. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3689–3700, 2005     

Metal‐Free 2,2,6,6‐Tetramethylpiperidin‐1‐yloxy Radical (TEMPO) Catalyzed Aerobic Oxidation of Hydroxylamines and Alkoxyamines to Oximes and Oxime Ethers

TEMPO‐Mediated oxidation of hydroxylamines (=hydroxyamines) and alkoxyamines to the corresponding oxime derivatives is reported (TEMPO=2,2,6,6‐tetramethylpiperidin‐1‐yloxy radical; Scheme 2). These environmentally benign oxidations proceed in good to excellent yields (Table 1). For alkoxyamines, oxidation to the corresponding oxime ethers can be performed by using dioxygen as a terminal oxidant in the presence of 5–10 mol‐% of TEMPO or 4‐substituted derivatives thereof as a catalyst (Scheme 3 and Table 2). Importantly, benzyl bromides can directly be transformed to oxime ethers via in situ alkoxyamine formation by a nucleophilic substitution followed by TEMPO‐mediated oxidation (Scheme 4 and Table 3).     

Synthesis and characterization of well‐defined ABC‐type triblock copolymers via atom transfer radical polymerization and stable free‐radical polymerization

An asymmetric difunctional initiator 2‐phenyl‐2‐[(2,2,6,6 tetramethylpiperidino)oxy] ethyl 2‐bromo propanoate ( 1 ) was used for the synthesis of ABC‐type methyl methacrylate (MMA)‐tert‐butylacrylate (tBA)‐styrene (St) triblock copolymers via a combination of atom transfer radical polymerization (ATRP) and stable free‐radical polymerization (SFRP). The ATRP‐ATRP‐SFRP or SFRP‐ATRP‐ATRP route led to ABC‐type triblock copolymers with controlled molecular weight and moderate polydispersity (M_w/M_n < 1.35). The block copolymers were characterized by gel permeation chromatography and ¹H NMR. The retaining chain‐end functionality and the applying halide exchange afforded high blocking efficiency as well as maintained control over entire routes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2025–2032, 2002     

Multifunctional ATRP initiators: Synthesis of four‐arm star homopolymers of methyl methacrylate and graft copolymers of polystyrene and poly(t‐butyl methacrylate)

Tetrakis bromomethyl benzene was used as a tetrafunctional initiator in the synthesis of four‐armed star polymers of methyl methacrylate via atom transfer radical polymerization (ATRP) with a CuBr/2,2 bipyridine catalytic system and benzene as a solvent. Relatively low polydispersities were achieved, and the experimental molecular weights were in agreement with the theoretical ones. A combination of 2,2,6,6‐tetramethyl piperidine‐N‐oxyl‐mediated free‐radical polymerization and ATRP was used to synthesize various graft copolymers with polystyrene backbones and poly(t‐butyl methacrylate) grafts. In this case, the backbone was produced with a 2,2,6,6‐tetramethyl piperidine‐N‐oxyl‐mediated stable free‐radical polymerization process from the copolymerization of styrene and p‐(chloromethyl) styrene. This polychloromethylated polymer was used as an ATRP multifunctional initiator for t‐butyl methacrylate polymerization, giving the desired graft copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 650–655, 2001     

Influence of nitroxide structure on polystyrene brushes “grafted‐from” silicon wafers

Alkoxyamine derivatives based on 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO), N‐tert‐butyl‐N‐(1‐diethylphosphono‐(2,2‐dimethylpropyl)) nitroxide (SG1) and N‐tert‐butyl‐N‐(2‐methyl‐1‐phenylpropyl) nitroxide (TIPNO) containing a C₁₁ hydrophobic spacer and a reactive triethoxysilyl polar head, were synthesized and anchored to silicon wafers by the Langmuir–Blodgett reactive deposition technique at surface pressures ranging from 15 to 32 mN/m. Polystyrene brushes (M_n ～ 8500–66,400 g/mol) were grown from the alkoxyamine functionalized silicon wafers by nitroxide mediated radical polymerization and characterized by ellipsometry and water contact angle measurements. The main parameters influencing the grafting density and the degree of stretching of the brushes are the nitroxide polarity and, therefore, the behavior of the corresponding alkoxyamines at the air/water interface of the Langmuir–Blodgett trough. Depending on the alkoxyamine chemical structure and the surface pressure during Langmuir–Blodgett deposition, polystyrene brushes with grafting densities of 0.3–1.0 chains/nm² and stretching values of 40–70% were obtained. Regarding alkoxyamines deposited at high surface pressures, size exclusion chromatography experiments performed on both cleaved polystyrene brushes and chains simultaneously grown in the bulk revealed that the polymerization degree of the bulk and surface chains are significantly different, suggesting that steric constrains affect the polymerization kinetics occurring at the silicon surface. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3367–3374, 2008     

Absolute Rate Constants for the Addition of the 1‐(tert‐Butoxy)carbonylethyl Radical to Alkenes in Solution

Absolute rate constants and some of their Arrhenius parameters are reported for the addition of the 1‐[(tert‐butoxy)carbonyl]ethyl radical (MeC . HCO₂Me₃) to several mono‐ or 1,1‐disubstituted alkenes in acetonitrile as obtained by time‐resolved electron spin resonance spectroscopy. At 295 K, the rate constants range from 470 M ⁻¹ s⁻¹ (but‐1‐ene) to 2.4⋅10⁵ M ⁻¹ s⁻¹ (1,1‐diphenylethene), the experimental activation energies range from 26.8 kJ/mol (but‐1‐ene) to 14.7 kJ/mol (styrene), and the frequency factors obey on the average log (A/M ⁻¹ s⁻¹)=7.9±0.5. The rate constants of the secondary 1‐[(tert‐butoxy)carbonyl]ethyl radical are close to the geometric mean of those of the related primary [(tert‐butoxy)carbonyl]methyl and the tertiary 2‐(methoxycarbonyl)propan‐2‐yl radicals. The activation energies for addition of these three carboxy‐substituted alkyl radicals are mainly governed by the addition enthalpy but are also substantially lowered by ambiphilic polar effects. The results support a previously derived predictive analysis, and relations to rate constants of acrylate polymerizations are discussed.     

Porphyrin derivatives act as vinylene monomers in TEMPO‐mediated radical copolymerization with styrene

In this article, we offer clear evidence for the radical copolymerizability of porphyrin rings in 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO)‐mediated radical copolymerizations with styrene. The radical copolymerizations of styrene with 5,10,15,20‐tetrakis(pentafluorophenyl)porphyrin (H₂TFPP) was conducted using 1‐phenyl‐1‐(2,2,6,6‐tetramethyl‐1‐piperidinyloxy)ethane as an initiator. The refractive index (RI) traces for the size‐exclusion chromatography of the resulting copolymers were unimodal with narrow molecular weight distributions. The RI traces shifted toward higher molecular weight regions as the polymerization progressed, and the number‐average molecular weights were close to those calculated on the basis of the feed compositions and monomer conversions. These features were in good agreement with a TEMPO‐mediated mechanism. The traces recorded by the ultraviolet‐visible (UV‐vis) detector (430 nm) were identical to those obtained by the RI detector, indicating a statistical copolymerization of styrene with H₂TFPP. This also indicated that H₂TFPP acted as a monomer and not as a terminator or a chain‐transfer agent under the conditions used. A benzyl radical addition to H₂TFPP was conducted as a model reaction for the copolymerization using tributyltin hydride as a chain‐transfer agent, affording a reduced porphyrin, 2‐benzyl‐5,10,15,20‐tetrakis(pentafluorophenyl)chlorin 1 , via radical addition to the β‐pyrrole position. The UV‐vis spectrum of 1 was fairly similar to that of poly(styrene‐co‐H₂TFPP), indicating that H₂TFPP polymerized at its β‐pyrrole position in the TEMPO‐mediated radical polymerization. TEMPO‐mediated radical copolymerizations of styrene with several porphyrin derivatives were also demonstrated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Deactivation reactions in the modeled 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐mediated free‐radical polymerization of styrene: A comparative study with the 2,2,6,6‐tetramethyl‐1‐piperidinyloxy/acrylonitrile system

The competitiveness of the combination and disproportionation reactions between a 1‐phenylpropyl radical, standing for a growing polystyryl macroradical, and a 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) radical in the nitroxide‐mediated free‐radical polymerization of styrene was quantitatively evaluated by the study of the transition geometry and the potential energy profiles for the competing reactions with the use of quantum‐mechanical calculations at the density functional theory (DFT) UB3‐LYP/6‐311+G(3df, 2p)//(unrestricted) Austin Model 1 level of theory. The search for transition geometries resulted in six and two transition structures for the radical combination and disproportionation reactions, respectively. The former transition structures, mainly differing in the out‐of‐plane angle of the N? O bond in the transition structure TEMPO molecule, were correlated with the activation energy, which was determined to be in the range of 8.4–19.4 kcal mol^?1 from a single‐point calculation at the DFT UB3‐LYP/6‐311+G(3df, 2p)//unrestricted Austin Model 1 level. The calculated activation energy for the disproportionation reaction was less favorable by a value of more than 30 kcal mol^?1 in comparison with that for the combination reaction. The approximate barrier difference for the TEMPO addition and disproportionation reaction was slightly smaller for the styrene polymerization system than for the acrylonitrile polymerization system, thus indicating that a β‐proton abstraction through a TEMPO radical from the polymer backbone could diminish control over the radical polymerization of styrene with the nitroxide even more than in the latter system. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 232–241, 2007     

Nitroxide‐Mediated Radical Polymerization in Microemulsion

Nitroxide‐mediated polymerizations of styrene in microemulsion have been carried out at 125 °C using the cationic surfactant tetradecyltrimethylammonium bromide and the nitroxides 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (TEMPO) and N‐tert‐butyl‐N‐[1‐diethylphosphono‐(2,2‐dimethylpropyl)] nitroxide (SG1). TEMPO‐mediated polymerizations were extremely slow, with large particles (d_n = 39–129 nm) and broad molecular weight distributions (MWDs). The origin of the broad MWDs was likely significant alkoxyamine decomposition and differing diffusion rates of monomer and low MW alkoxyamines (and nitroxide) between monomer‐swollen micelles and polymer particles. SG1‐mediated polymerizations proceeded at higher rates, resulting in nanoparticles (d_n = 21–37 nm) and lower than for TEMPO.

     

Enantioselective Syntheses of Conformationally Rigid,Highly Lipophilic Mesityl‐Substituted Amino Acids

Three N‐Boc‐protected amino acids substituted with a mesityl (=2,4,6‐trimethylphenyl) group were synthesized in enantiomerically pure form, either by asymmetric epoxidation or by aminohydroxylation as the source of chirality. The 3‐mesityloxirane‐2‐methanol 7 , easily available in high enantiomer purity by Sharpless epoxidation, was converted into 3‐{[(tert‐butoxy)carbonyl]amino}‐3‐mesitylpropane‐1,2‐diol 9 by a regio‐ and stereoselective ring opening with an ammonia equivalent (sodium azide or benzhydrylamine), followed by hydrogenation and in situ treatment with (Boc)₂O (Boc=[(tert‐butoxy)carbonyl]) (Scheme 3). Oxidative cleavage of the diol fragment in 9 afforded N‐[(tert‐butoxy)carbonyl]‐α‐mesitylglycine 1 of >99% ee. This amino acid was also prepared in enantiomerically pure form starting from 2,4,6‐trimethylstyrene ( 11 ) by a regioselective Sharpless asymmetric aminohydroxylation, followed by a 2,2,6,6‐tetramethylpiperidin‐1‐yloxyl (TEMPO)‐catalyzed oxidation (Scheme 4). On the other hand, 1‐[(tert‐butoxy)carbonyl]‐2‐{{[(tert‐butyl)dimethylsilyl]oxy}methyl}‐3‐mesitylaziridine 14 was prepared from 9 by a sequence involving selective protection of the primary alcohol (as a silyl ether), activation of the secondary alcohol as a mesylate, and base‐induced (NaH) cyclization (Scheme 5). The reductive cleavage of the aziridine ring (H₂, Pd/C), followed by alcohol deprotection (Bu₄NF/THF) and oxidation (pyridinium dichromate (PDC)/DMF or (TEMPO)/NaClO) provided, in high yield and enantiomeric purity, N‐[(tert‐butoxy)carbonyl]‐β‐mesitylalanine 2 . Alternatively, the regioselective ring opening of the aziridine ring of 14 with lithium dimethylcuprate, followed by silyl‐ether cleavage and oxidation lead to N‐[(tert‐butoxy)carbonyl]‐β‐mesityl‐β‐methylalanine 3 . A conformational study of the methyl esters of the N‐Boc‐protected amino acids 1 and 3 carried out by variable‐temperature ¹H‐NMR and semi‐empirical (AM1) calculations shows the strong rotational restriction imposed by the mesityl group.     

Investigations of thermal polymerization in the stable free‐radical polymerization of 2‐vinylnaphthalene

The feasibility of utilizing stable free‐radical polymerization (SFRP) in the synthesis of well‐defined poly(2‐vinylnaphthalene) homopolymers has been investigated. Efforts to control molecular weight by manipulating initiator concentration while maintaining a 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (TEMPO):benzoyl peroxide (BPO) molar ratio of 1.2:1 proved unsuccessful. In addition, systematic variations of the TEMPO: BPO molar ratio did not result in narrow molecular weight distributions. In situ Fourier transform infrared spectroscopy (FTIR) indicated that the rate of monomer disappearance under SFRP and thermal conditions were identical. This observation indicated a lack of control in the presence of the stable free radical, TEMPO. The similarities in chemical structure between styrene and 2‐vinylnaphthalene suggested thermally initiated polymerization occurred via the Mayo mechanism. A kinetic analysis of the thermal polymerization of styrene and 2‐vinylnaphthalene suggested that the additional fused ring in 2‐vinylnaphthalene increased the propensity for thermal polymerization. The observed rate constant for thermal polymerization of 2‐vinylnaphthalene was determined using in situ FTIR spectroscopy and was one order of magnitude greater than styrene, assuming pseudo‐first‐order kinetics. Also, an Arrhenius analysis indicated that the activation energy for the thermal polymerization of 2‐vinylnaphthalene was 30 kJ/mol less than styrene. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 583–590, 2002; DOI 10.1002/pola.10131     

Synthesis of star polymers via nitroxide mediated free‐radical polymerization: A “core‐first” approach using resorcinarene‐based alkoxyamine initiators

The synthesis of new octafunctional alkoxyamine initiators for nitroxide‐mediated radical polymerization (NMRP), by the derivatization of resorcinarene with nitroxide free radicals viz TEMPO and a freshly prepared phosphonylated nitroxide, is described. The efficiency of these initiators toward the controlled radical polymerization of styrene and tert‐butyl acrylate is investigated in detail. Linear analogues of these multifunctional initiators were also prepared to compare and evaluate their initiation efficiency. The favorable conditions for polymerization were optimized by varying the concentration of initiators and free nitroxides, reaction conditions, etc., to obtain well‐defined star polymers. Star polystyrene thus obtained were further used as macro‐initiator for the block copolymerization with tert‐butyl acrylate. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5559–5572, 2007     

Synthesis of miktoarm star and miktoarm star block copolymers via a combination of atom transfer radical polymerization and stable free‐radical polymerization

A trifunctional initiator, 2‐phenyl‐2‐[(2,2,6,6‐tetramethyl)‐1‐piperidinyloxy] ethyl 2,2‐bis[methyl(2‐bromopropionato)] propionate, was synthesized and used for the synthesis of miktoarm star AB₂ and miktoarm star block AB₂C₂ copolymers via a combination of stable free‐radical polymerization (SFRP) and atom transfer radical polymerization (ATRP) in a two‐step or three‐step reaction sequence, respectively. In the first step, a polystyrene (PSt) macroinitiator with dual ω‐bromo functionality was obtained by SFRP of styrene (St) in bulk at 125 °C. Next, this PSt precursor was used as a macroinitiator for ATRP of tert‐butyl acrylate (tBA) in the presence of Cu(I)Br and pentamethyldiethylenetriamine at 80 °C, affording miktoarm star (PSt)(PtBA)₂ [where PtBA is poly(tert‐butyl acrylate)]. In the third step, the obtained St(tBA)₂ macroinitiator with two terminal bromine groups was further polymerized with methyl methacrylate by ATRP, and this resulted in (PSt)(PtBA)₂(PMMA)₂‐type miktoarm star block copolymer [where PMMA is poly(methyl methacrylate)] with a controlled molecular weight and a moderate polydispersity (weight‐average molecular weight/number‐average molecular weight < 1.38). All polymers were characterized by gel permeation chromatography and ¹H NMR. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2542–2548, 2003