Synthesis of aromatic oxazolyl‐ and carboxyl‐functionalized polymers: Atom transfer radical polymerization of styrene initiated by 2‐[(4‐bromomethyl)phenyl]‐4,5‐dihydro‐4,4‐dimethyloxazole

The synthesis of a new compound, 2‐[(4‐bromomethyl)phenyl]‐4,5‐dihydro‐4,4‐dimethyloxazole ( 1 ), and its utility in the synthesis of oxazoline‐functionalized polystyrene by atom transfer radical polymerization (ATRP) methods are described. Aromatic oxazolyl‐functionalized polymers were prepared by the ATRP of styrene, initiated by ( 1 ) in the presence of copper(I) bromide/2,2′‐bipyridyl catalyst system, to afford the corresponding α‐oxazolyl‐functionalized polystyrene ( 2 ). The polymerization proceeded via a controlled free radical polymerization process to produce the corresponding α‐oxazolyl‐functionalized polymers with predictable number‐average molecular weights, narrow molecular weight distributions in high‐initiator efficiency reactions. Post‐ATRP chain end modification of α‐oxazolyl‐functionalized polystyrene ( 2 ) to form the corresponding α‐carboxyl‐functionalized polystyrene ( 3 ) was achieved by successive acid‐catalyzed hydrolysis and saponification reactions. The polymerization processes were monitored by gas chromatography analyses. The unimolecular‐functionalized initiator and functionalized polymers were characterized by thin layer chromatography, spectroscopy, size exclusion chromatography, and nonaqueous titration analysis. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis and association of poly(N,N‐dimethylacrylamide) copolymers with perfluorocarbon pendent groups connected through polyethylene‐glycol tethers

The synthesis is reported of copolymers of N,N‐dimethylacrylamide (DMA) and methacrylates containing 2,2′‐dihydroperfluorodecanoyl (RF) groups separated from the methacrylate by long polyethylene glycol (PEG) tether groups (between 1000 and 14,000 Da). At concentrations of between 1 and 8 wt % the copolymers with macromonomer contents of 1 mol % or less give gels in organic solvents such as dioxane, THF, or methanol, as well as in water. Given the low molecular weights, this indicates very efficient association of very low numbers of RF groups. Association and gel formation is enormously enhanced in the presence of longer PEG tethers. This is consistent with smaller poly(N,N,‐dimethylacrylamide) (PDMA) intermolecular excluded volume effects that are mediated by the longer PEG tethers and possibly by the incompatibility of PEG and PDMA that may lead to the formation of PEG microdomains. This increases the local concentrations of the RF groups in the PEO domains that are not diluted by the PDMA chains, as would be the case in the absence of PEG tethers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 360–373, 2004     

Synthesis of lipo‐glycopolymer amphiphiles by nitroxide‐mediated living free‐radical polymerization

The nitroxide‐mediated living free‐radical polymerization of 1,2,5,6‐di(isopropylidene)‐D ‐glucose‐2‐propenoate was achieved in dimethylformamide at 105 °C with an α‐hydrido alkoxyamine initiator functionalized with a lipophilic N,N‐di(octadecyl)amine group. The kinetics of the polymerization were investigated, and the mechanism was shown to be a living process allowing, after hydrolysis, controlled molecular weight, low‐polydispersity lipo‐glycopolymers to be prepared. The amphiphilic character of the macromolecule could be altered by either the exchange of the alkoxyamine at the chain end with hydrogen or the preparation of copolymers with lipophilic monomers such as N,N‐di(octadecyl)acrylamide. The surface and membrane‐forming properties of these novel lipopolymers demonstrate their amphiphilic character. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3379–3391, 2002     

Multisensitive polymers based on 2‐vinylpyridine and N‐isopropylacrylamide *

Poly(2‐vinylpyridine) (P2VP) containing functionalized end groups was synthesized using nitroxyl‐mediated radical polymerization with a hydroxy‐functionalized stable free radical. It was shown that P2VP could be synthesized with variable molar masses and low polydispersities. The transformation of the hydroxy groups to an acrylic ester led to the formation of macromonomers. A free‐radical copolymerization of these macromonomers with N‐isopropylacrylamide gave a graft copolymer with a poly(N‐ispopropylacrylamide) backbone and P2VP side chains. Polymers containing different amounts of the monomers were synthesized. It was possible to vary both the amount of P2VP side chains at a constant chain length of the macromonomer and the chain length at a nearly constant chain number. The behavior of the multifunctional macromolecules at different temperatures and pH values was investigated using dynamic light scattering and DSC. The macromolecules were found to retain the specific properties of the homopolymers. The hydrodynamic radii of the synthesized graft copolymers were both dependent on the temperature and pH value. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3797–3804, 2001     

“Click” coupling between alkyne‐decorated multiwalled carbon nanotubes and reactive PDMA‐PNIPAM micelles

Covalent functionalization of alkyne‐decorated multiwalled carbon nanotubes (MWNTs) with a well‐defined, azide‐derivatized, thermoresponsive diblock copolymer, poly(N,N‐dimethylacrylamide)‐poly(N‐isopropylacrylamide) (PDMA‐PNIPAM) was accomplished by the Cu(I)‐catalyzed [3 + 2] Huisgen cycloaddition. It was found that this reaction could simultaneously increase the molecular size and bonding density of grafted polymers when PDMA‐PNIPAM micelles were employed in the coupling system. On the other hand, attachment of molecularly dissolved unimers of high‐molecular weight onto the nanotube resulted in low‐graft density. The block copolymer bearing azide groups at the PDMA end was prepared by reversible addition–fragmentation transfer polymerization, which formed micelles with a diameter of ～40 nm at temperatures above its critical micelle temperature. Scanning electron microscopy was utilized to demonstrate that the coupling reaction was successfully carried out between copolymer micelles and alkyne‐bearing MWNTs. FTIR spectroscopy was utilized to follow the introduction and consumption of alkyne groups on the MWNTs. Thermogravimetric analysis indicated that the functionalized MWNTs consisted of about 45% polymer. Transmission electron microscopy was utilized to image polymer‐functionalized MWNTs, showing relatively uniform polymer coatings present on the surface of nanotubes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7187–7199, 2008     

Synthesis of well‐defined azide‐terminated poly(vinyl alcohol) and their subsequent modification via click chemistry

A new azide‐functionalized xanthate, S‐(4‐azidomethylbenzyl) O‐(2‐methoxyethyl) xanthate, was synthesized and used to mediate the reversible addition fragmentation chain transfer polymerization of vinyl acetate. The polymerization was demonstrated to be controlled, and well‐defined PVAc with α‐azide, ω‐xanthate groups were obtained, the xanthate groups of which were further removed by radical‐induced reduction with lauroyl peroxide in the presence of excess 2‐propanol. Hydrolysis of α‐azide‐terminated PVAc (N₃‐PVAc) led to the formation of the corresponding α‐azide‐terminated PVA (N₃‐PVA). Finally, end‐modification of N₃‐PVA by click chemistry with alkyne‐end‐capped poly(caprolactone) (A‐PCL), alkynyl‐mannose, and alkynyl‐pyrene was carried out to obtain a new block copolymer PCL‐b‐PVA, and two PVA with mannose or pyrene as the end functional groups. The polymers were characterized by gel permeation chromatography, ¹H NMR spectroscopy, and FTIR. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4494–4504, 2009     

Hydrogen‐bonded supramolecular polymers from derivatives of α‐amino‐ε‐caprolactam: A bio‐based material

Hydrogen‐bonded supramolecular polymers were prepared from the derivatives of α‐amino‐ε‐caprolactam (ACL), obtained from a renewable resource. Several self‐complimentary bis‐ or tetra‐caprolactam monomers were synthesized by varying the number of carbons of the spacer between the hydrogen‐bonding end groups. Physical properties of these hydrogen‐bonded polymers were clearly demonstrated by differential scanning colorimetry, solid‐state NMR, and X‐ray powder diffraction analyses. The supramolecular behavior was also supported by fiber formation from the melt for several of these compounds, and stable glassy materials were prepared from the physical mixtures of two different biscaprolactams. The self‐association ability of ACL was also used by incorporating ACL at the chain ends of low‐molecular weight Jeffamine (M_n = 900 g/mol) using urea and amide linkages. The transformation of this liquid oligomer at room temperature into a self‐standing, transparent film clearly showed the improvement in mechanical properties obtained by the introduction of terminal hydrogen‐bonding groups. Finally, the use of monomers with a functionality of four gave rise to network formation either alone or combination with bifunctional monomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

End group effect on the thermo‐sensitive properties of well‐defined water‐soluble polystyrenics with short pendant oligo(ethylene glycol) groups synthesized by nitroxide‐mediated radical polymerization

The effects of hydrophobic chain end groups on the cloud points of thermo‐sensitive water‐soluble polystyrenics were investigated. Well‐defined poly (4‐vinylbenzyl methoxytris(oxyethylene) ether) (PTEGSt) and poly(α‐hydro‐ω‐(4‐vinylbenzyl)tetrakis(oxyethylene)) (PHTrEGSt) were prepared by nitroxide‐mediated radical polymerization using α‐hydrido alkoxyamine initiators including two monomer‐based initiators. The polymers were reduced with (n‐Bu)₃SnH to replace the alkoxyamine end group with hydrogen. In the studied molecular weight range (M_n,GPC = 3000 to 28,000 g/mol), we found that the hydrophobic end groups decreased the cloud point by 1–20 °C depending on the molecular weight and the largest depression was observed at the lowest molar mass. The cloud points of PTEGSt and PHTrEGSt with two hydrophobic end groups, phenylethyl and alkoxyamine, exhibited a monotonic increase with the increase of molecular weight. For polymers with only one hydrophobic end group, either phenylethyl or alkoxyamine, the cloud point initially increased with the increase of molecular weight but leveled off/decreased slightly with further increasing molar mass. For polymers with essentially no end groups, the cloud point decreased with the increase of chain length, which represents the “true” molecular weight dependence of the cloud point. The observed molecular weight dependences of the cloud points of polystyrenics with hydrophobic end group(s) are believed to result from the combined end group effect and “true” molecular weight effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3707–3721, 2007     

End‐functionalized copolymers prepared by the addition–fragmentation chain‐transfer method: Vinyl acetate/methacrylonitrile system

Copolymers of vinyl acetate and methacrylonitrile were prepared by free‐radical polymerization in the presence of the chain‐transfer agent (CTA) ethyl‐α‐ (t‐butanethiomethyl)acrylate. Molecular weight measurements showed that the chain‐transfer constants increased with the vinyl acetate content of the comonomer mixture, ranging from 0.42 for methacrylonitrile to 6.3 for the copolymerization of a vinyl acetate‐rich monomer mix (89/11). The bulk copolymer composition was not appreciably affected by the amount of CTA used in the copolymerization. The efficiency of the addition–fragmentation mechanism in producing specifically end‐functionalized copolymers was investigated with ¹H NMR spectroscopy. Spectral peaks consistent with all the expected end groups were observed for all comonomer feeds. Peaks consistent with other end groups were also observed, and these were particularly prominent for copolymers made with lower CTA concentrations. At the highest concentrations used, quantitative measurements of end‐group concentrations indicated that 70–80% of the end groups were those expected on the basis of the addition–fragmentation chain‐transfer mechanism. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2911–2919, 2001     

Separation of polyethylene glycols and maleimide‐terminated polyethylene glycols by reversed‐phase liquid chromatography under critical conditions

The separation of polyethylene glycols and maleimide‐substituted polyethylene glycol derivatives based on the number of maleimide end‐groups under critical liquid chromatography conditions has been investigated on a reversed‐phase column. The critical solvent compositions for nonfunctional polyethylene glycols and bifunctional maleimide‐substituted polyethylene glycols were determined to be identical at about 40% acetonitrile in water on a reversed‐phase octadecyl carbon chain‐bonded silica column using mixtures of acetonitrile and water of varying composition as the mobile phase at 25°C. The maleimide‐functionalized polyethylene glycols were successfully separated according to maleimide functionality (with zero, one, two, or three maleimide end‐groups, respectively) under the critical isocratic elution conditions without obvious effect of molar mass. The separation was mainly due to the hydrophobic interaction between the maleimide end‐groups and the column packing. Off‐line matrix‐assisted laser desorption/ionization time of flight mass spectrometry was used to identify the repeating units and, especially, the end‐groups of the maleimide‐substituted polyethylene glycols. Liquid chromatography analysis at critical conditions could provide useful information to optimize the synthesis of functional polyethylene glycols. To our knowledge, this is the first report of the baseline separation of maleimide‐functionalized polyethylene glycols based on the functionality independent of the molar mass without derivatization by isocratic elution.     

Anionic synthesis and characterization of ω‐carboaldehyde‐functionalized polybutadienes and polyisoprenes

Attempted preparation of ω‐formyl‐functionalized polydienes by termination of poly(butadienyl)lithium and poly(isoprenyl)lithium with 4‐morpholinecarboaldehyde resulted in 73 and 38% dimer formation (SEC), respectively, under conditions that quantitativey produced ω‐formyl‐functionalized polystyrene. Dimer formation was attributed to postfunctionalization, base‐catalyzed, aldol‐type condensation based on FTIR and ¹H‐NMR analysis of the dimer products. High yields (>97%) of ω‐formyl‐functionalized polydienes were formed by workup using acidic methanol; quantitative functionalization resulted from end capping the polymeric organolithium chain ends with 1,1‐diphenylethylene prior to the functionalization reaction. The ω‐formylpolydienes were characterized by hydroxylamine end‐group titration, FTIR, and both ¹H‐ and ¹³C‐NMR spectroscopy. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1143–1156, 1999     

Synthesis and characterization of water‐soluble barbiturate‐ and thiobarbiturate‐functionalized polystyrene

The synthesis and characterization of barbiturate‐ and thiobarbiturate‐functionalized polystyrene from polystyrene homopolymer by polymer‐modification reactions is discussed. Polystyrene homopolymer quantitatively functionalized at the para postion with diethyl oxomalonate functionality was subjected to a condensation reaction with urea and thiourea in the presence of sodium methoxide in methanol. This reaction proceeded essentially to quantitative conversion to the barbiturate‐ (BAPS) and thiobarbiturate‐functionalized polystyrenes (TBAPS) as estimated by ¹H NMR, UV, and IR spectroscopies. Thus, several copolymers of styrene with barbiturate‐ and thiobarbiturate‐functionalized styrene were synthesized. The detailed characterizations of quantitatively functionalized polystyrene using gel permeation chromatographic, IR, UV, and ¹H NMR spectroscopic techniques as well as thermogravimetric analysis are discussed. An application of the newly synthesized polymer in removing Cu(II) ions from aqueous solution is demonstrated. This is the first report on the synthesis of BAPS and TBAPS by the polymer‐modification route or otherwise. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 731–737, 2002; DOI 10.1002/pola.10154     

Raft polymerization of N,N‐dimethylacrylamide from magnetic poly(2‐hydroxyethyl methacrylate) microspheres to suppress nonspecific protein adsorption

Nonspecific interaction is a key parameter affecting the efficiency of proteins, nucleic acids or cell separation. Currently, many approaches to introduce antifouling properties to materials have been developed. Among these, surface modification with polymer brushes plays a prominent role. The aim of this study was to synthesize new magnetic microspheres grafted with poly(N,N‐dimethylacrylamide) (PDMA) that resist nonspecific protein adsorption. Monodisperse macroporous poly(2‐hydroxyethyl methacrylate) (PHEMA) microspheres, 4 μm in size, were synthesized by a multiple swelling polymerization method. To render the microspheres magnetic, iron oxide was precipitated inside the microsphere pores. Functional carboxyl groups, introduced by the hydrolysis of the 2‐(methacryloyl)oxyethyl acetate (HEMA‐Ac) comonomer, were used to react with propargylamine, followed by coupling of a chain transfer agent via an azide‐alkyne click reaction. PDMA was grafted from the PHEMA microspheres using reversible addition‐fragmentation chain transfer polymerization (RAFT), resulting in surfaces with more than 81 wt % PDMA attached. The successful modification of the microspheres was confirmed by XPS. The magnetic microspheres grafted with PDMA showed excellent antifouling properties as tested in bovine serum protein solutions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1036–1043     

Chemical synthesis of poly‐γ‐glutamic acid by polycondensation of γ‐glutamic acid dimer: Synthesis and reaction of poly‐γ‐glutamic acid methyl ester

α‐Methyl glutamic acid (L ‐L )‐, (L ‐D )‐, (D ‐L )‐, and (D ‐D )‐γ‐dimers were synthesized from L ‐ and D ‐glutamic acids, and the obtained dimers were subjected to polycondensation with 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride and 1‐hydroxybenzotriazole hydrate as condensation reagents. Poly‐γ‐glutamic acid (γ‐PGA) methyl ester with the number‐average molecular weights of 5000∼20,000 were obtained by polycondensation in N,N‐dimethylformamide in 44∼91% yields. The polycondensation of (L ‐L )‐ and (D ‐D )‐dimers afforded the polymers with much larger |[α]_D | compared with the corresponding dimers. The polymer could be transformed into γ‐PGA by alkaline hydrolysis or transesterification into α‐benzyl ester followed by hydrogenation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 732–741, 2001     

Dual‐responsive supramolecular self‐assembly of inclusion complex of an azobenzene‐ended poly(ε‐caprolactone) with a water‐soluble pillar[6]arene and its application in controlled drug release

Dual photo‐ and pH‐responsive polymeric vesicles are constructed from a host–guest complex between a water‐soluble pillar[6]arene and an azobenzene ended functionalized poly(ε‐caprolactone). Reversible morphological transitions between vesicles and solid aggregates are achieved upon repeated UV stimulus and pH stimulus. Moreover, the polymeric vesicles present excellent cytocompatibility toward HepG2 cells and can be further applied for controlled release of a hydrophilic model drug, DOX?HCl. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2477–2482     

Tuning the sugar‐response of boronic acid block copolymers

A detailed study of the pH‐ and sugar‐responsive behavior of poly(3‐acrylamidophenylboronic acid pinacol ester)‐b‐poly(N,N‐dimethylacrylamide) (PAPBAE‐b‐PDMA) block copolymers is presented. Reversible addition‐fragmentation chain transfer (RAFT) polymerization of the pinacol ester of 3‐acrylamidophenylboronic acid resulted in homopolymers with molecular weights between 12,000 and 37,000 g/mol. The resulting homopolymers were employed as macro‐chain transfer agents during the polymerization of N,N‐dimethylacrylamide (DMA). Successful chain extension and removal of the pinacol protecting groups to yield poly(3‐acrylamidophenylboronic acid)‐b‐PDMA (PAPBA‐b‐PDMA) with free boronic acid moieties resulted in pH‐ and sugar‐responsive block copolymers that were subsequently investigated for their behavior in aqueous solution. The PAPBA‐b‐PDMA block copolymers were capable of solution self‐assembly due to the PAPBA block being water‐insoluble below its pK_a. The resulting aggregates were demonstrated to solubilize and release model hydrophobic compounds, as demonstrated by fluorescence studies. Dissociation of the aggregates was induced by raising the pH above the pK_a of the boronic acid residues or by adding sugars capable of forming boronate esters. Aggregate size, dissociation kinetics, and the effect of various sugars were considered. The critical sugar concentration needed to induce aggregate dissociation was tuned by incorporation of hydrophilic DMA units within the PAPBA responsive segment to yield PDMA‐b‐poly(3‐acrylamidophenylboronic acid‐co‐DMA) block copolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of well‐defined polymers end‐functionalized with crosslinkable aziridine groups by living anionic polymerization

Well‐defined end‐functionalized polystyrene, poly(α‐methylstyrene), and polyisoprene with polymerizable aziridine groups were synthesized by the termination reactions of the anionic living polymers of styrene, α‐methylstyrene, and isoprene with 1‐[2‐(4‐chlorobutoxy)ethyl]aziridine in tetrahydrofuran at ?78 °C. The resulting polymers possessed the predicted molecular weights and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.1) as well as aziridine terminal moieties. The cationic ring‐opening polymerization of the ω‐monofunctionalized polystyrene having an aziridinyl group with Et₃OBF₄ gave the polymacromonomer, whereas the α,ω‐difunctional polystyrene underwent crosslinking reactions to afford an insoluble gel. Crosslinking products were similarly obtained by the reaction of the α,ω‐diaziridinyl polystyrene with poly(acrylic acid)‐co‐poly(butyl acrylate). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4126–4135, 2005     

Polymerization and self‐assembly of thermally responsive in‐chain functionalized double‐hydrophilic macromonomers

Double‐hydrophilic in‐chain functionalized macromonomers consisting of poly(N‐isopropylacrylamide) (PNIPAM) and poly(ethylene oxide) were prepared by a multistep procedure including esterification of PNIPAM monoester of maleic acid with α‐methoxy‐ω‐hydroxypolyoxyethylene or its amidation with α‐methoxy‐ω‐aminopolyoxyethylene. The polymerization of the macromonomers was carried out in aqueous solutions. The temperature was the key parameter controlling the polymerization process that was performed in the organized domains formed by the macromonomers below and above the phase transition temperature (T_tr). Polymacromonomers with higher degrees of polymerization were prepared at temperatures just below the T_tr. Static light scattering measurements on dilute aqueous solutions of thermally‐responsive macromonomers and their polymerization products demonstrated that they formed aggregates below the T_tr. Supramolecular structures with low density cores, formed by the polymacromonomers at room temperature, were imaged by SEM. Morphological tuning was achieved by varying both the composition of the copolymer and the concentration of the aqueous solution. The rheological behavior of the polymacromonomers in 25 wt % aqueous solution was compared to that of the respective macromonomers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4720–4732, 2007     

Star‐shaped and photocrosslinked poly(1,5‐dioxepan‐2‐one): Synthesis and characterization

New star‐shaped and photocrosslinked poly(1,5‐dioxepan‐2‐one) (PDXO) has been synthesized through ring‐opening polymerization initiated by SnOct₂/pentaerythritol. The star‐shaped PDXO was end‐functionalized by acrolyol chloride to form acrylate end groups. The end‐functionalized PDXO was photocrosslinked initiated by 2,2‐dimethoxy‐2‐phenylacetophenone. The gel content ranged from 80 to 99%, indicating a high degree of crosslinking. The thermal properties of the star‐shaped PDXO and the photocrosslinked PDXO were analyzed by differential scanning calorimetry. The glass‐transition temperature was determined to approximately ?32 °C for the crosslinked PDXO. The viscosity numbers were determined for star‐shaped PDXO, with reference to linear homologues. The star‐shaped PDXO had lower viscosity numbers than the linear counterparts. The crosslinked PDXO showed a rather hydrophilic surface as compared with other resorbable polyesters. The advancing contact angle was 64 ± 2, and the receding angle was 57 ± 4. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2049–2054, 2002     

The incorporation of carboxylate groups into temperature‐responsive poly(N‐isopropylacrylamide)‐based hydrogels promotes rapid gel shrinking

Aqueous gel deswelling rates for copolymer hydrogels comprising N‐isopropylacrylamide (IPAAm) and 2‐carboxyisopropylacrylamide (CIPAAm) in response to increasing temperatures were investigated. Compared with pure IPAAm‐based gels, IPAAm–CIPAAm gels shrink very rapidly in response to small temperature increases across their lower critical solution temperature (their volume is reduced by five‐sixths within 60 s). Shrinking rates for these hydrogels increase with increasing CIPAAm content. In contrast, structurally analogous IPAAm–acrylic acid (AAc) copolymer gels lose their temperature sensitivity with the introduction of only a few mole percent of AAc. Additionally, deswelling rates of IPAAm–AAc gels decrease with increasing AAc content. These results indicate that IPAAm–CIPAAm copolymer gels behave distinctly from IPAAm–AAc systems even if both comonomers, CIPAAm and AAc, possess carboxylic acid groups. Thus, we propose that the sensitive deswelling behavior for IPAAm–CIPAAm gels results from strong hydrophobic chain aggregation maintained between network polymer chains due to the similar chemical structures of CIPAAm and IPAAm. This structural homology facilitates aggregation of chain isopropylamide groups for both IPAAm and CIPAAm sequences with increasing temperature. The incorporation of AAc, however, shows no structural homology to IPAAm, inhibiting chain aggregation and limiting collapse. A functionalized temperature‐sensitive poly(N‐isopropylacrylamide) hydrogel containing carboxylic acid groups is possible with CIPAAm, producing rapid and large volume changes in response to smaller temperature changes. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 335–342, 2001