Click chemistry‐assisted triazole‐substituted azobenzene and fulgimide units in the pendant‐based copoly(decyloxymethacrylate)s for dual‐mode optical switches

Copolymer containing new thermally reversible click chemistry‐assisted triazole‐substituted azobenzene and fulgimide units in the pendant F‐co‐A was prepared by free‐radical solution addition polymerization technique. The F and A were also prepared for comparison. The DSC analysis of F indicates that the polymer possessing the C‐form of fulgimide unit exhibited higher T_m than that of E‐form of the same polymer and revealed that the C‐form of fulgimide unit in F is highly ordered. The cis‐trans back isomerization behavior of the click chemistry‐assisted triazole‐substituted azobenzene unit in film A has thermal irreversibility, while in F‐co‐A it exhibited thermal reversibility. The UV‐exposed film of F‐co‐A heated around T_g leads to cis‐trans back isomerization of azobenzene unit and thermally stable C‐form of fulgimide which retains its conjugated structure where both the photochromic units are converted into planar conformations and exhibit high fluorescence properties. The fluorescence maxima of C‐form in F‐co‐A red shifted compared with F , because the substituted triazole ring in the azobenzene unit stabilized the C‐form of fulgimide unit. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7843–7860, 2008     

Dramatic decrease of the cis content and molecular weight of cis‐transoidal polyphenylacetylene at 23 °C in solutions prepared in air

The thermal cis–trans isomerization of cis‐transoidal polyphenylacetylene (PPA) synthesized with Noyori's catalyst [Rh(C?CPh)(norbornadiene)(PPh₃)₂] has been investigated under both ambient and inert atmospheres in solution and in bulk. In all cases, an intramolecular cyclization results in cis–trans isomerization, and subsequent chain cleavage produces 1,3,5‐triphenylbenzene. This reaction is accelerated by the presence of air, particularly when the reaction takes place in solution. Decreases in the cis content and molecular weight show that the intramolecular cyclization process takes place at 23 °C in solution. The mechanism of this reaction is identical to that reported previously for cis‐cisoidal and cis‐transoidal PPA synthesized with Ziegler–Natta catalysts. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3212–3220, 2002     

Hyperbranched photo responsive and liquid crystalline azo‐siloxane polymers synthesized by click chemistry

Three new types of hyperbranched photoactive liquid crystalline siloxane polymers containing azo moieties were synthesized using click chemistry methodology. The polymers were soluble in most of the polar solvents like chloroform, tetrahydrofuran, dimethylformamide, dimethyl sulphoxide and dichloromethane. The molecular weights of the polymers were in the range of 9000–12,000 g mol^?1. The trans‐cis photoisomerization of the polymer were studied both under UV radiation and dark. The isomerization rate constants were found to be in the range of 0.7–1.4 × 10^?2 sec^?1 and 7.0 × ?2.5 × 10^?5 sec^?1. The thermotropic behavior of the polymers was studied by using polarizing optical microscopy and differential scanning calorimetry, respectively. The polymers P1 and P2 showed liquid crystalline texture characteristic of nematic phase. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Syntheses of bisazo‐containing polymethacrylates using atom transfer radical polymerization and the photoalignment behavior

Three kinds of photoresponsive polymethacrylates containing different bisazo chromophores were prepared with atom transfer radical polymerization and characterized with proton nuclear magnetic resonance, gel permeation chromatography, and ultraviolet–visible spectra. These polymers had similar molecular weights, molecular weight distributions, glass‐transition temperatures, and absorption coefficients. The irradiation of these polymer films with a linearly polarized laser could induce birefringence because of the reorientation of the bisazo chromophores through trans–cis–trans isomerization cycles of double azo bonds, and the corresponding mechanism was also examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4237–4247, 2004     

Azobenzene‐Functionalized Metal–Organic Polyhedra for the Optically Responsive Capture and Release of Guest Molecules

Stimuli‐responsive metal–organic polyhedra (srMOPs) functionalized with azobenzene showed UV‐irradiation‐induced isomerization from the insoluble trans‐srMOP to the soluble cis‐srMOP, whereas irradiation with blue light reversed this process. Guest molecules were trapped and released upon cis‐to‐trans and trans‐to‐cis isomerization of the srMOPs, respectively. This study provides a new direction in the ever‐diversifying field of MOPs, while laying the groundwork for a new class of optically responsive materials.     

Synthesis of methyl‐substituted azobenzene–carbazole conjugated copolymers with photoinduced structural changes

Azobenzene switches its structure instantaneously by reversible trans‐to‐cis and cis‐to‐trans photoisomerization with light irradiations. Dynamic change in polymer structure is expected via introducing an azobenzene unit into the main chain. In this study, a set of methyl‐substituted azobenzene–carbazole conjugated copolymers is synthesized by the Suzuki–Miyaura coupling method. Introduction of methyl substituents to the azobenzene unit of the monomer, and polymerization in a high‐boiling solvent improve the molecular weight of the polymer. Decrease of effective conjugation length due to the twisted structure of the main chain allows progress of photoisomerization. The microstructure of the polymer was determined with grazing incidence X‐ray diffraction (GIXD) measurements using synchrotron radiation. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1756–1764     

Photoswitchable architectural polymer: Toward azo‐based polyamidoamine side‐chain dendritic polyester

A versatile approach to the synthesis of novel polyamidoamine (PAMAM) side‐chain dendritic polyester (SCDPE) possessing azobenzene motifs in the polymeric core is described and displayed reversible cis–trans (E/Z) isomerization upon exposure to UV light. A polymerization reaction was conducted in solution using ester‐terminated PAMAM dendritic diol ( 1a , G 3.5) and azobenzene dicarboxylic acid chloride in the presence of triethylamine. PAMAM dendritic diol 1a as well as SCDPE ( 1 ) were thoroughly characterized by means of IR and NMR (¹H and ¹³C) spectroscopies. The intrinsic viscosity of 1 at 36 °C in CHCl₃ was found to be 0.38 dl/g. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4182–4188, 2001     

A novel generation of photoactive comb‐shaped polyamides for the photoalignment of liquid crystals

A new approach to the synthesis of photoactive comb‐shaped homo‐ and copolyamides containing azobenzene, cinnamate, and coumarin side groups for photoalignment of liquid crystals was elaborated. Photooptical properties and photoorientational ability of these polymers with respect to liquid crystals were studied. It was shown that polarized UV irradiation of all spin‐coated polyamides leads to orientation of liquid crystalline molecules deposited on the polyamide thin films. The synthesized polymers containing cinnamate and coumarin side groups as well as azobenzene‐containing cyano‐ and nitro‐substituted polymers demonstrated good orientation ability in relation to liquid crystals displaying photoinduced planar orientation with high dichroism values within the range of 0.68–0.72. Contrary to the above‐mentioned polyamides, azobenzene‐containing fluorosubstituted polymers induced a homeotropic orientation of liquid crystals. It was shown that the synthesized photoactive polyamides can be considered as promising photoalignment materials for application in display technology, photonics, and other “smart” optical devices. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4031–4041     

Controlled stereochemistry of polyamides derived from cis/trans‐1,4‐cyclohexanedicarboxylic acid

A series of copolyamides 12.y was synthesized either with y = 6, or 1,4‐cyclohexanedicarboxylic acid (1,4‐CHDA) residue, or a mixture of both. The influence of the synthetic route of 1,4‐CHDA containing polyamides on the obtained cis–trans ratio of the incorporated 1,4‐CHDA was investigated. The use of acid chlorides provided a synthetic route with full control of the cis–trans ratio of the 1,4‐CHDA residue during synthesis, whereas synthesis at elevated pressure and temperature caused isomerization. The content and cis–trans ratio of 1,4‐CHDA in the copolyamides were determined by solution ¹³C NMR spectroscopy. Increasing the degree of partial substitution of the adipic acid by 1,4‐CHDA resulted in an increase in T_m, even for low molar precentages of 1,4‐CHDA. This phenomenon points to isomorphous crystallization of both the 12.6 and 12.CHDA repeating units. The mps of the synthesized polyamides were independent of the initial cis–trans ratio of 1,4‐CHDA, provided that the samples were annealed at 300 °C before DSC analysis. The polyamides exhibited a different melting pattern depending on the 1,4‐CHDA content. At a low a 1,4‐CHDA content a net exothermic recrystallization occurred during melting, whereas at higher contents of 1,4‐CHDA this recrystallization occurs to a lesser extent, and two separate melting areas are observed. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 833–840, 2001     

Living cationic polymerization of azobenzene‐containing vinyl ether and its photoresponsive behavior

The living cationic polymerization of 4‐[2‐(vinyloxy)ethoxy]azobenzene (AzoVE) was achieved with various Lewis acids in the presence of an ester as an added base. When Et_1.5AlCl_1.5 was used as a catalyst, the living polymerization system was controllable by UV irradiation as a result of cis and trans isomerization of the azobenzene side groups. Furthermore, an initiating system consisting of SnCl₄ and EtAlCl₂ realized fast living polymerization of AzoVE. The polymerization rate of this system was 3 orders of magnitude faster than that obtained with Et_1.5AlCl_1.5. Poly(4‐[2‐(vinyloxy)ethoxy]azobenzene) was soluble in a diethyl ether/hexane mixture at 25 °C but became insoluble upon irradiation with UV light. This phase‐transition behavior was sensitive and reversible upon irradiation with UV or visible light and reflected the change in polarity occurring with cis and trans isomerization of the azobenzene side groups in the polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5138–5146, 2005     

Synthesis of a new polymer surface bearing grafted azo polymer chains

Azobenzene, a photosensitive chromophore that undergoes photoinduced and thermal cis–trans isomerization, can be applied in a nonlinear optical field. {4′‐[(Hydroxy)ethyl]amino}‐4‐nitroazobenzene (disperse red 1) corresponds to one of these azo compounds, which can be grafted to a polymer chain as a part of the main chain, as a dangling group, or onto the polymer surface. In the last case, disperse red 1 is transformed into an acrylic monomer and then grafted onto a polypropylene surface modified with a cold carbon dioxide‐plasma treatment. A method is proposed for quantifying the radicals formed during the plasma treatment and, consequently, for optimizing the grafting reaction. The best conditions (the nature of the solvent, temperature, monomer concentration, and duration) are given. Both IR and Raman spectroscopies were used as efficient techniques for grafting characterization. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3052–3061, 2001     

Copolymers of phenylacetylene and para‐nitrophenylacetylene with nonlinear optical properties: Further insight on the conformational structure

Copolymers of phenylacetylene (PA) and para‐nitrophenylacetylene (pNPA), named poly(PA‐co‐pNPA), were obtained in different PA/pNPA ratios and different reaction conditions with Rh(I) catalysts. The structure of the copolymers was investigated with IR, laser Raman, ¹H NMR, electron spin resonance (ESR), and diffuse reflective ultraviolet–visible (DRUV) light spectroscopies. The pristine polymers had a cis–transoidal structure as the predominant conformation with some trans sequences. Detailed ESR studies supported by computer simulation and conformation analysis have suggested that the trans sequences were due to pNPA sequences and that the cis‐C?C bond sequences of pNPA were associated with a stabilized cis radical formed by four to five of pNPA monomers. This particular stabilization was probably the reason for the higher reactivity of pNPA as compared with PA. These cis sequences were preferentially cleaved to generate π radicals. The compression and, to a minor extent, thermal treatment of poly(PA‐co‐pNPA) samples induced a cis‐to‐trans isomerization, leading to a trans–transoidal form with a planar zigzag structure and with a conjugation length up to n = 24 repeat units, determined by DRUV and Raman experiments. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2365–2376, 2004     

Synthesis and polymerization of amphiphilic methacrylates containing permanent dipole azobenzene chromophores

New amphiphilic photochromic methacrylates with the structures of 4‐[ω‐methacryloyloxyoligo(ethyleneglycol)]‐4′‐cyanoazobenzene (MEn) and 4‐methacryloyloxy‐4′‐{2‐cyano‐3‐oxy‐3‐[ω‐methoxyoligo(ethyleneglycol)]prop‐1‐en‐1‐yl}azobenzene (MEnMe) and oligo(oxyethylene) segments of different lengths were synthesized. These methacrylates were characterized by the presence of permanent dipole azobenzene chromophores and hydrophilic oligo (oxyethylene) segments. The methacrylates were obtained with six‐step and five‐step synthetic sequences, respectively, in 12–47% overall yields. The radical polymerization of the MEn monomers afforded a 50% yield of the corresponding polymers as orange solids with a number‐average molecular weight of about 40 kD. No solid polymer was obtained from the radical polymerization of the MEnME compounds. Two‐dimensional NMR spectra allowed the unequivocal assignment of the NMR signals and demonstrated a significant contribution of internal charge transfer to the electronic distribution of the azobenzene chromophore. Relaxation time measurements confirmed that the flexible polyether segment effectively decoupled photochromic groups from the polymer backbone. Optical microscopy, differential scanning calorimetry analysis, and X‐ray diffraction data demonstrated the presence of interdigitated smectic mesophases. The stability of mesophases showed a significant dependence on the chemical structure of the analyzed compounds. The glass‐transition temperatures of the polymers were rather low because of the plasticizing effect of the spacers. The monomers and polymers were used for the deposition of Langmuir films and Langmuir–Blodgett–Kuhn multilayers. A strong influence of the macromolecular structure on the film properties was observed. The photoresponsive properties of monomers and polymers were investigated with irradiation at different wavelengths. Isomerization kinetics were independent of both molecular weight and spacer length. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2957–2977, 2001     

Siloxane polymers containing azo moieties synthesized by click chemistry for photo responsive and liquid crystalline applications

Three new types of siloxane‐based photoactive liquid crystalline polymers containing azo side groups were synthesized through the click chemistry route. The polymers having molecular weight range of 14,000–34,000 g mol^?1 were soluble in most of the polar solvents like chloroform, tetrahydrofuran, dimethylformamide, dimethyl sulfoxide, and dichloromethane. The photoresponsive trans–cis photoisomerization under UV radiation and cis–trans relaxation process in dark for the polymers were studied. The isomerization rate constants were found to be 0.01–0.04 sec^?1 and 1.16*10^?4–4.67*10^?4 sec^?1, respectively. It has been noted that the polymers showed high intensity absorption for n‐π* in chloroform. Both trans and cis forms of azide monomers having azo moiety exhibited molar extinction coefficient ( ? _max) in the range of 22,000–33,000 L mol^?1 cm^?1. The thermotropic behavior of the polymers was studied by polarizing optical microscope (POM) and differential scanning calorimetry (DSC) experiments. Polymer P1 showed liquid crystalline textures of nematic droplets, whereas P2 showed smectic focal conic texture and nematic droplets. Polymer P1 was also studied for photomechanical bending on exposure to UV radiation. The polymers showed initial degradation temperature in the range of 210–275°C. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation and photoinduced isomerization study of a homopolymer and a copolymer based on 4′‐(6‐acryloxy)hexyloxy‐4‐methoxyazobenzene and acrylic acid

The synthesis and characterization of a copolymer based on 4′‐(6‐acryloxy)hexyloxy‐4‐methoxyazobenzene (MAB6) and acrylic acid (AA) are reported. A reaction was carried out by free‐radical polymerization, yielding an MAB6 homopolymer and an AA–MAB6 copolymer with an MAB6 concentration of 16–80%. A nematic phase was observed in the copolymer when the MAB6 content was 44% or higher. Both nematic and smectic phases were observed in the MAB6 homopolymer. All of the polymers were investigated for trans–cis–trans isomerization in a solid film. The samples were irradiated with nonpolarized ultraviolet light (385 nm) before absorption measurements were taken with an ultraviolet–visible spectrometer. The copolymer and homopolymer exhibited a thermal cis–trans isomerization, which could be described by a double‐exponential relaxation process (fast and slow). The relaxation experiment suggested that the hydrogen bonding may have hindered the slow process but had no effect on the fast process. A film of a copolymer sample with a high MAB6 content could be optically aligned by the exposure of the sample to polarized light (385 nm). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 4017–4024, 2003     

Influence of the alkene structure on the mechanism and kinetics of thiol–alkene photopolymerizations with real‐time infrared spectroscopy

The effect of the chemical structure on the reactivity of alkenes used in thiol–ene photopolymerizations has been investigated with real‐time infrared spectroscopy. Model studies of thiol–ene photoreactions with various monofunctional hydrocarbon alkenes and the monofunctional thiol ethyl‐3‐mercaptopropionate have been performed to identify and understand structure–reactivity relationships. The results demonstrate that terminal enes react very rapidly with thiol, achieve complete conversion, and are independent of the aliphatic hydrocarbon substituent length. Disubstitution on a single carbon of a terminal ene significantly reduces the reactivity, whereas substitution on the carbon α to the terminal ene has a minimal influence on the reactivity. Internal trans enes display reduced reactivity and a lower overall conversion and deviate from the standard thiol–ene reaction mechanism because of steric strain induced by 1,3‐interactions. The reactivity and conversion of internal trans enes decrease as the substituents on the ene become larger, reaching a minimum when the substituent size is greater than or equal to that of propyl groups. Internal cis enes react rapidly with thiol; however, they undergo a fast isomerization–elimination reaction sequence generating the trans ene, which proceeds to react at a reduced rate with thiol. The reactivity of cyclic enes is dictated by ring strain, stereoelectronic effects, and hydrogen abstractability. The reactivity trends in the model studies have been used to explain the photopolymerization mechanism and kinetics of a series of multifunctional thiol–ene systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6283–6298, 2004     

Synthesis,characterization, and photoresponsive behavior of new azobenzene‐containing polyethers

Two new polyethers, bearing azobenzene moiety in the side chain, were synthesized in excellent yields by means of anionic polymerization of 4‐glycidyloxyazobenzene and 4‐cyano‐4′‐glycidyloxyazobenzene (leading to azo‐P1 and azo‐P2 polymers, respectively) with the system polyiminophosphazene base t‐Bu‐P₄/3,5‐di‐tert‐butylphenol as initiator. The polymers were characterized with respect to their molecular weights, structure, and calorimetric features. The polyether bearing cyanoazobenzene group in the side chain was found to exhibit nematic phase up to 200 °C. E–Z isomerization of both polymers in tetrahydrofuran solution, after irradiating with UV light at 364 nm for 15 min, was investigated by means of UV–visible absorption spectroscopy. In the case of glycidylic monomers as well as the resulting polymers, E–Z isomerization was also investigated by means of ¹H NMR, by direct irradiation in the NMR probe in deuterated 1,1,2,2‐tetrachloroethane solution. By this technique, in the case of 4‐cyano‐4′‐glycidyloxyazobenzene, it was found that irradiation led to a photostationary state corresponding to an amount of Z isomer equal to 25%. For azo‐P1 polymer, Z–E or “reverse” isomerization was investigated at 60, 70, or 80 °C directly in the NMR probe; as expected, the process followed a first‐order rate law. The kinetic constants as well as the activation energy for the process were determined in this temperature range. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5426–5436, 2009     

Thiol–ene coupling reaction of fatty acid monomers

The reactivities and reaction rates of the thiol–ene coupling reaction of 2‐ethyl‐(hydroxymethyl)‐1,3‐propanediol trimercapto acetate and 2‐ethyl‐(hydroxymethyl)‐1,3‐propanediol trimercapto propionate with two common unsaturated fatty acid methyl esters (methyl oleate and methyl linoleate) were evaluated. The reactions were monitored with real‐time IR and ¹H NMR, which both showed that the mercapto acetate was more reactive than the mercapto propionate. Both thiols were more prone to add to the monounsaturated methyl oleate than to methyl linoleate, which contained two unconjugated double bonds. According to bond energy calculations, the thiol hydrogen of mercapto acetate was somewhat more difficult to abstract than the hydrogen of mercapto propionate. Consequently, the formed S? C bond in the acetate case was stronger than in the propionate case, and so the equilibrium was more shifted toward the addition products. The real‐time IR measurements also showed that the cis unsaturation in methyl oleate isomerized much more quickly than that in methyl linoleate, and this also had an impact on the overall addition rate of the thiols because a trans unsaturation was more reactive than a cis unsaturation. The higher isomerization rates in the oleate systems, compared with those of the linoleate systems, was suggested to be due to a more restricted rotation along the C? C bond of the reacted unsaturation in linoleate. This study showed the importance of trans unsaturations in obtaining reasonable reaction rates in thiol–ene reactions with fatty acid derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6346–6352, 2004     

Synthesis and characterization of new thermotropic liquid crystalline polymers with paired mesogens containing azobenzene unit: Poly(malonic ester)s

New thermotropic liquid crystalline poly(malonic ester)s with two symmetrical mesogenic units (paired mesogens) were prepared by the polycondensation of 1,6-dibromohexane and novel malonic ester compounds with different flexible ethyleneoxy spacer lengths linked to azobenzene group. All the prepared malonic esters and the resulting polymers exhibited monotropic liquid crystallinity with a nematic texture. The length of the spacer had influence on the temperature of phase transition of them. A possibility of application of the prepared polymers to reversible optical information storage media was also identified through a trans–cis isomerization of azobenzene by UV irradiation.     

The preparation of 3,6‐bis(3‐hexylthien‐2‐yl)‐s‐tetrazine and its conjugated polymers

We demonstrated, for the first time, that 3,6‐bis(3‐hexylthien‐2‐yl)‐s‐tetrazine (TTz) with hexyl group at the 3‐position of thiophene rings can be prepared using a modified sulfur‐assisted Pinner synthesis. Although the hexyl group creates large steric hindrance to the tetrazine ring formation reaction, and the reaction under a traditional condition only produces trace amount of the target product, the yield of this reaction under a modified reaction condition using anhydrous hydrazine at 68 °C can reach 65%. Two new copolymers of the resulting TTz and hexyl‐ or 2‐ethylhexyl‐substituted cyclepentadithiophene have been prepared. The polymers show a broader light absorption in film than in solution attributing to the large distribution of effective conjugation length of polymer chain due to the existence of both cis‐ and trans‐orientations of the 3‐hexylthiophene units in the planar polymer chain in solid state. Although the polymers show a narrow band gap and a deep HOMO level, which are desirable for generating an efficient light absorption and a larger open circuit voltage (V_oc) of the resulting solar cell devices, the device performance is not as good as expected. It is attributed to the random distribution of the cis‐ and trans‐conformations along the polymer chain. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.