Spectroscopic properties of Nd ions in nano-perovskite CaTiO3

In this work, we present for the first time the spectroscopic properties of perovskite nanocrystals CaTiO₃: Nd³⁺, measured at room and liquid nitrogen temperature. Samples were prepared by the sol–gel method and annealed at 700 and 1000 °C. The concentration of Nd³⁺ ranged from 0.5% to 5%. Average nanocrystallite size primarily depends on the annealed temperature and is about 25 and 50 nm for 700 and 1000 °C, respectively. The absorption, emission and excitation spectra (monitored at 1078 nm) as well as the decay time profile of the emission from the ⁴F_3/2 energy level of Nd³⁺ are obtained. The increasing amount of Nd³⁺ ions decreases the lifetime of the ⁴F_3/2 level and that changes from 146 μs for 0.5% to 50 μs for 5% of Nd³⁺ concentration. The strongest emission was observed at two regions: 1050–1120 nm and 865–930 nm and was assigned to the ⁴F_3/2→⁴I_11/2 and ⁴F_3/2→⁴I_9/2 transitions, respectively. The spectroscopic quality parameter of neodymium in the CaTiO₃ lattice has been calculated from the emission spectra. The influence of luminescent properties depending on the annealing temperature and concentration of neodymium ions is discussed.     

Upconversion Luminescence Properties of a LiNb0.3Ta0.7O3:Er3+,Yb3+ Ceramic

A co-doped LiNb_0.3Ta_0.7O₃:Er³⁺,Yb³⁺ ceramic was prepared by a high temperature solid state procedure. Under the excitation of 980 nm laser radiation, intense 660 nm red light and 550 nm green light emissions corresponding to the ⁴F_9/2→⁴I_15/2 and ²H_11/2/⁴S_3/2→⁴I_15/2 transitions of Er³⁺ were observed. The change of Yb³⁺ concentration has a more significant influence on luminous intensity than the Er³⁺ concentration. The emission of red and green lights is attributed to a two-photon process. The upconversion luminescence mechanisms were analyzed in detail.     

基于NaYF4:Yb3+,Er3+上转换发光纳米晶的复合微球组装及其光动力活性研究

采用微乳液法,以NaYF₄:Yb³⁺,Er³⁺纳米晶为发光基元,肽菁锌(ZnPc)光敏分子与十八碳烯-马来酸酐共聚物(PMAO)为功能分子,一步组装获得了NaYF₄-ZnPc-PMAO复合微球,此微球同时具备成像与光动力活性功能,NaYF₄可作为低生物背景的荧光成像剂,同时其上转换发光可以敏化ZnPc用于光动力活性研究,PMAO分子经过简单的水解反应即可实现表面羧基功能化。TEM,Zeta电位与PL测试证实了微球的结构与性能。利用荧光共聚焦成像技术实现了对Hela细胞的发光成像;进一步通过单线态氧监测及980 nm光照下的MTT法细胞活性测试表明微球具有光动力活性功能。     

The dependence of persistent phosphorescence on annealing temperatures in CaTiO3:Pr nanoparticles prepared by a coprecipitation technique

Red emitting phosphors of CaTiO₃:Pr³⁺ nanoparticles with size ranging from 6 to 95 nm have been prepared by a coprecipitation technique and structurally characterized by X-ray diffraction, energy dispersive spectroscopy and scanning electron microscopy. The fluorescence and phosphorescence of CaTiO₃:Pr³⁺ nanoparticles as a function of annealing temperature are investigated. It is found that fluorescence intensities monotonously increase with increasing temperature. However, a maximum in phosphorescence with the increase of annealing temperature occurs for the sample prepared at 700 °C. Based on the measurement of fluorescence emission, fluorescence excitation and reflectance spectra as well as time decay patterns of fluorescence and phosphorescence, it is demonstrated that the dependence of fluorescence and phosphorescence on annealing temperature originates from the decrease of surface defects with the increase of temperature.     

Frequency upconversion in rare-earth doped fluoroindate glasses

We present recent results on frequency upconversion (UPC) obtained in fluoroindate glasses (FIG) doped with Ho³⁺, Tm³⁺ and Nd³⁺ ions and codoped with Pr³⁺/Nd³⁺ and Yb³⁺/Tb³⁺ ions. The results for the Ho³⁺-doped samples show strong evidence of energy transfer (ET) between Ho³⁺ ions resonantly excited at 640 nm. The origin of the blue-green upconverted fluorescence observed was identified and the dynamics of the signals revealed the pathways involved in the UPC process. In the case of Tm³⁺-doped FIG, the samples were resonantly excited at 650 nm and the main mechanism that contributes for the red-to-blue upconversion is excited-state absorption (ESA). The FIG samples codoped with Pr³⁺/Nd³⁺ were excited at 588 nm in resonance with transitions starting from the ground state of the Nd³⁺ and the Pr³⁺ ions. It was observed that the presence of Nd³⁺ ions enhanced the Pr³⁺ emission at 480 nm by two orders of magnitude. Multiphonon (MP)-assisted upconversion is also discussed for Nd³⁺-doped FIG pumped at 866 nm. Emission at 750 nm with a peculiar linear dependence with the laser intensity was observed and explained. A rate-equation model that includes MP absorption via thermally coupled electronic excited states of Nd³⁺ was developed and describes well the experimental results. The role played by effective phonon modes is clearly demonstrated. MP-assisted UPC process was also studied in Yb³⁺/Tb³⁺-codoped FIG samples excited at 1064 nm, which is off-resonance with electronic transitions starting from the ground state. It was determined that the mechanism leading to Tb³⁺ emission in the blue is due to ET from a pair of excited Yb³⁺ ions followed by ESA in the Tb³⁺ ions.     

Microstructure and luminescence of transparent glass ceramic containing Er:BaF2 nano-crystals

Transparent BaF₂-SiO₂ glass ceramics doped with different content of Er³⁺ were prepared by sol-gel method. The microstructural evolution of the samples was studied with X-ray diffraction (XRD), transmission electron microscope (TEM), absorption and infrared spectra (IR). BaF₂ nano-crystals with 2-15 nm in size, depending on the crystallization temperature, distributed homogeneously among the amorphous silica matrix. The BaF₂ lattice parameters decreased with the increasing of Er³⁺ doping, indicating the incorporation of Er³⁺ into nano-crystals, which was further confirmed by energy dispersive X-ray spectroscopy (EDS) and absorption spectra analysis. The upconversion emissions of Er³⁺ emerged under the excitation at 980 nm for glass ceramic heat-treated at 800 °C.     

Sr7Zr(PO4)6∶xEu2+蓝色荧光粉的合成及其发光特性

通过高温固相反应合成了新型的蓝色荧光粉Sr₇Zr(PO₄)₆∶xEu²⁺。通过X射线粉末衍射(XRD)、紫外可见(UV-Vis)吸收光谱、荧光光谱研究了Sr₇Zr(PO₄)₆∶xEu²⁺材料的相纯度及荧光性质。结果表明,Eu²⁺掺杂获得的Sr₇Zr(PO₄)₆∶xEu²⁺荧光粉为纯相,且200~400 nm范围内的近紫外(NUV)光均能对其进行有效的激发。在315 nm的激发下,Sr₇Zr(PO₄)₆∶xEu²⁺荧光粉发射出峰值位于415 nm左右的蓝光,且Eu²⁺在Sr₇Zr (PO₄)₆基质中的最佳掺杂浓度为0.05,相应的CIE色度坐标为(0.164,0.021),比商用BaMgAl₁₀O₁₇∶Eu²⁺(BAM)蓝色荧光粉具有更高的色纯度。     

荧光纳米材料YPO4∶Sm3+@YPO4@聚乙二醇的构筑及其荧光性能

为了改善稀土磷酸盐的疏水性和荧光性能,利用水热和微波的方法构筑了双层荧光纳米材料YPO₄∶Sm³⁺@YPO₄@PEG (PEG为聚乙二醇)。首先通过调控YPO₄∶Sm³⁺与YPO₄的物质的量之比制备不同壳厚的核壳结构纳米发光材料YPO₄∶Sm³⁺@YPO₄,优选能够增强主体荧光性能的最佳物质的量之比。然后选用PEG进行包覆,得到YPO₄∶Sm³⁺@YPO₄@PEG。利用X射线衍射、扫描电子显微镜、透射电子显微镜、傅里叶变换红外光谱和荧光光谱对产物的结构、形貌和荧光性能进行了表征。结果表明：包覆前后的纳米荧光粉都具有单一的四方晶系(YPO₄)结构,呈纳米球型,半径60~100 nm,包覆层的厚度10~20 nm。双层核壳结构的YPO₄∶Sm³⁺@YPO₄@PEG的荧光强度比纳米荧光粉YPO₄∶Sm³⁺增强了6倍多。可见该双层荧光纳米材料不仅具有亲水性和生物相容性,也增强了YPO₄∶Sm³⁺的荧光强度。     

不同掺杂浓度Tm3+：LiLuF4单晶的1800 nm荧光发射

采用坩埚下降法生长了Tm³⁺掺杂浓度为0.45%,0.90%,1.63%与3.25%（摩尔分数,x）的LiLuF₄单晶.测试了样品的电感耦合等离子体原子发射光谱（ICP-AES）、X射线衍射（XRD）谱、吸收光谱（1400-2000 nm）,并且分析比较了808 nm半导体激光器（LD）激发下荧光光谱. 结果表明：当Tm³⁺的浓度从0.45%变化到3.25%时,1800 nm处的荧光强度呈现了先增后减的趋势,当掺杂浓度约为0.90%时达到最大值,而位于1470 nm处的荧光强度则呈现了相反的趋势. Tm³⁺：³F₄能级的荧光衰减寿命随着掺杂浓度的增加不断减小. 1800 nm处的这种荧光强度变化归结于Tm³⁺离子间的交叉驰豫效应（³H₆,³H₄→³F₄,³F₄）和自身的浓度猝灭效应. 同时计算得到了浓度为0.90%的样品在1890 nm处的最大发射截面为0.392×10^-20 cm². 并且根据Judd-Ofelt 理论所得寿命和测定的荧光寿命计算得到了³F₄→³H₆的最大量子效率约为120%.     

Synthesis of Gd3PO7:Eu nanospheres via a facile combustion method and optical properties

Eu³⁺-doped Gd₃PO₇ nanospheres with an average diameter of ∼300 nm and a narrow size distribution have been prepared by a facile combustion method and structurally characterized by X-ray diffraction and field emission scanning electron microscopy. The luminescent properties were systemically studied by the measurement of excitation/emission spectra, and emission spectra under different temperatures, as well as by photostability. The strong red-emission intensity peaking at 614 nm originates the ⁵D₀→⁷F₂ transition and is observed under 254-nm irradiation, indicating that Eu³⁺ ions in Gd₃PO₇ mainly occupied non-centrosymmetry sites. The CIE1931 XY chromaticity coordinates of Gd₃PO₇:Eu³⁺ nanospheres are (x=0.654, y=0.345) in the red area, which is near the National Television Standard Committee standard chromaticity coordinates for red. Thus, Gd₃PO₇:Eu³⁺ nanospheres may be potential red-emitting phosphors for PDP and Xe-based mercury-free lamps.     

Rare-Earth Actived Sol-Gel Films for Scintillator Applications

Recently, there has been a growth of interest in new phosphors preparation for high resolution X-rays imaging systems. Sol-gel method has been used to synthesize europium doped gadolinium and lutetium oxide films. Structural and optical results are investigated and discussed on both Gd₂O₃:Eu³⁺ (5 mol%) and Lu₂O₃:Eu³⁺ (5 mol%). Those films are crystallized into cubic phase and present a density of 7.1 g/cm³ and 8.4 g/cm³ for Gd₂O₃:Eu³⁺ and Lu₂O₃:Eu³⁺ respectively. Room temperature emission spectra using an excitation of 468 nm was used to obtain the intense red emission ⁵D₀ ⁷F₂ (611 nm) of Eu³⁺. Scintillation properties at 611 nm are finally proved using X-rays excitation.     

Eu,Dy co-doped SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript> phosphors prepared by sol–gel-combustion processing

SrAl₂O₄:Eu²⁺, Dy³⁺ powders were synthesized by sol–gel–combustion process using metal nitrates as the source of metal ions and citric acid as a chelating agent of metal ions. The amounts of citric acid in mole were two times those of the metal ions. By tracing the formation process of the sol–gel, it is found that decreasing the amount of NO₃ ⁻ in the solution is necessary for the formation of transparent sol and gel, and the dropping of ethanol into the precursor solution can decrease the amount of NO₃ ⁻ in the solution. By combusting citrate sol at 600 °C, followed by heating the resultant combustion ash at 1,100–1,300 °C in a weak reductive atmosphere containing active carbon, SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors can prepared. X-ray diffraction, Thermogravimetry–differential thermal analysis, scanning electron microscopy and fluorescence spectrophotometer were used to investigate the formation process and luminescent properties of the as-synthesized SrAl₂O₄:Eu²⁺, Dy³⁺. The results reveal that the SrAl₂O₄ crystallizes completely when the combustion ash was sintered at 1,200–1,300 °C. The excitation and emission spectra indicate that excitation broadband mainly lies in a visible range and the phosphors emit strong light at 510 nm under the excitation of 348 nm. The afterglow of phosphors lasts for over 10 h when the excited source is cut off.     

Effect of SnO2 Nanocrystals on the Emission of Eu3+ Ions in Silica Matrix

Silica xerogels containing Eu³⁺ ions and SnO₂ nanocrystals were prepared in the sol‐gel process, and characterized by x‐ray diffraction (XRD) and photoluminescence spectra. Under the excitation at 393 nm, characteristic emission of Eu³⁺ ions at 614 nm was enhanced with increasing amount of SnO₂ nanocrystals. Moreover, when the Eu³⁺/SnO₂ co‐doped samples were excited at 345 nm, corresponding to the sideband of SnO₂ nanocrystals, the emission of Eu³⁺ ions at 614 nm was clearly observed, while no emission of Eu³⁺ ions for the Eu³⁺‐doped sample. It may be ascribed to the energy transfer from SnO₂ conduction band to Eu³⁺ conduction band. Further experimental results suggest that the energy transfer may be achieved through surface transition state.     

Comparison between electron-phonon coupling strengths of U and Nd ions doped in LaCl3 and U in LaBr3 single crystals

Temperature-dependent line width and line shift measurements between 7 and 280 K have been performed for a number of absorption transitions in the 4000-21,000 cm⁻¹ energy range of the U³⁺:LaCl₃, Nd³⁺:LaCl₃ and U³⁺:LaBr₃ single crystal spectra. The values of the electron-phonon coupling parameter were determined for U³⁺:LaCl₃ and Nd³⁺:LaCl₃ by a fit of experimentally observed line widths to an equation containing the temperature dependent broadening due to the Raman two-phonon process. For both ions diluted in LaCl₃ the values of the parameters are considerably lower than in K₂LaCl₅, and the value of for U³⁺ in the LaCl₃ host is markedly larger as compared with that of Nd³⁺. Factors influencing these differences are discussed. With a temperature increase a blue shift of the absorption lines of the U³⁺ ions in LaCl₃ and LaBr₃ is observed. A comparison has been performed among the electron-phonon coupling parameters obtained from an analysis of the line widths of the U³⁺:LaCl₃ single crystal and those determined from temperature induced line shifts as well as between the magnitudes of the absolute increase in line width and line shifts in the 7-290 K temperature range for U³⁺ doped LaCl₃ and LaBr₃ crystals. The electron-phonon coupling is stronger for U³⁺ in the tribromide as compared with the trichloride host which is mainly due to a larger covalency of the first one.     

GdAlO_3:Er~(3+),Yb~(3+)荧光粉的制备与上转换发光性能

采用共沉淀、溶胶-凝胶和固相反应法制备了GdAlO3:Er3+,Yb3+荧光粉.借助X射线衍射、扫描电子显微镜、傅里叶变换红外光谱、N2-吸附、吸收光谱和荧光光谱等手段研究了不同方法制备的GdAlO3:Er3+,Yb3+荧光粉结构、形貌、表面基团和光吸收及上转换发光性能.结果表明:用共沉淀法比固相反应法和溶胶-凝胶法可以在更温和的条件下制得纯相GdAlO3:Er3+,Yb3+荧光粉,用共沉淀法和溶胶-凝胶法制备的GdAlO3:Er3+,Yb3+荧光粉颗粒都在纳米尺寸,溶胶-凝胶法制得的样品存在相对严重的颗粒团聚现象,而用固相反应法制备的荧光粉为微米级颗粒.GdAlO3:Er3+,Yb3+荧光粉在980 nm激发的上转换发射光谱包含波长为524和546 nm的绿光与659 nm的红光,且三种方法制备的样品绿光发射强度都显著高于红光.不同方法制备的荧光粉上转换发光强度和红光/绿光强度比相差较大,共沉淀法制备的样品上转换发光强度要显著高于固相法以及溶胶-凝胶法制备的样品,而溶胶-凝胶法制备的样品发光中红光/绿光相对强度比最高.红外光谱显示,不同方法制备的GdAlO3:Er3+,Yb3+荧光粉表面OH-、CO32-及CO2官能团含量不同,溶胶-凝胶法制备的样品要明显高些.基于红外光谱、不同Er3+和Yb3+离子掺杂浓度及不同激光功率上转换发光的结果,对Er3+和Yb3+之间的能量传递过程及不同方法制备荧光粉的上转换发光性能进行了讨论.     

La7O6(BO3)(PO4)2:Eu3+/Tb3+荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La₇O₆（BO₃）（PO₄）₂：Eu³⁺材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为⁵D₀→⁷F₂特征能级跃迁,Eu³⁺的最优掺杂浓度为0.08,对应的CIE坐标为（0.610 2,0.382 3）;La₇O₆（BO₃）（PO₄）₂：Tb³⁺材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb³⁺的⁵D₄→⁷F₅能级跃迁,Tb³⁺离子的最优掺杂浓度为0.15,对应的CIE坐标为（0.317 7,0.535 2）。此外,对2种材料的变温光谱分析发现Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂荧光材料均具有良好的热稳定性。     

Nd3+/Yb3+离子共掺的氧化钛基上转换发光玻璃的热学和力学性能

利用气悬浮无容器技术制备出了Nd³⁺/Yb³⁺稀土离子共掺杂的TiO₂-La₂O₃-ZrO₂(TLZ)发光玻璃. 利用差热分析(DTA)技术研究了该类新型稀土掺杂TiO₂基上转换发光玻璃的热稳定性,主要包括玻璃化转变温度、析晶起始温度以及析晶峰值温度. 并采用两种热分析动力学计算方法得到TLZ玻璃的析晶活化能值和指前因子.本文还研究了TLZ 发光玻璃的力学性能,发现其维氏硬度大小为7.50 GPa,断裂韧性大于1.20 MPa·m^1/2. 此外,还对TLZ玻璃在808 nm激光激发下的上转换发光性能进行了研究,实验结果显示光谱中有三个强发射谱峰. 优异的上转换发光性能以及良好的热稳定性和机械性能表明,这类新材料在上转换器件的实际应用中具有很大的潜力.     

Enhancement of the Up-conversion Luminescence of 12CaO · 7Al2O3:Tm3+/Yb3+ Doped with Alkaline Earth Metal Ions

12CaO?·?7Al₂O₃ doped with lanthanide is characterized by remarkable and technologically important up-conversion emission. However, the low up-conversion efficiency still remains the main limitation for practical applications. To improve the efficiency, bivalent alkaline earth ions (Mg²⁺, Sr²⁺, Ba²⁺)-tridoped Tm³⁺/Yb³⁺/12CaO?·?7Al₂O₃ were synthesized through a high-temperature solid-state reaction. The up-conversion luminescence properties of the samples were investigated by X-ray diffraction, fluorescence spectral measurement pump power, and fluorescence decay curves. The luminescence intensity of samples was significantly enhanced by bivalent alkaline earth ions. 12CaO?·?7Al₂O₃ doped with Sr²⁺ ions has stronger effects on up-conversion enhancement, which is better than Mg²⁺ and Ba²⁺. The up-conversion emission intensity was enhanced by 318 times and the red emission intensity by 218 times with 10?mol% Sr²⁺ ion. Additionally, the blue and red up-conversion emission peaks at 475 and 650?nm corresponding to energy transitions of ¹G₄ → ³H₆ and ¹G₄ → ³F₄, ³F₂ → ³H₆ were characterized using steady-state rate equations.     

Fabrication and optical properties of core-shell structured spherical SiO2@GdVO4:Eu phosphors via sol-gel process

Europium-doped nanocrystalline GdVO₄ phosphor layers were coated on the surface of preformed submicron silica spheres by sol-gel method. The resulted SiO₂@Gd_0.95Eu_0.05VO₄ core-shell particles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra, low voltage cathodoluminescence (CL), time resolved PL spectra and kinetic decays. The XRD results demonstrate that the Gd_0.95Eu_0.05VO₄ layers begin to crystallize on the SiO₂ spheres after annealing at 600 ^°C and the crystallinity increases with raising the annealing temperature. The obtained core-shell phosphors have spherical shape, narrow size distribution (average size ca. 600 nm), non-agglomeration. The thickness of the Gd_0.95Eu_0.05VO₄ shells on the SiO₂ cores could be easily tailored by varying the number of deposition cycles (50 nm for four deposition cycles). PL and CL show that the emissions are dominated by ⁵D₀-⁷F₂ transition of Eu³⁺ (618 nm, red). The PL and CL intensities of Eu³⁺ increase with increasing the annealing temperature and the number of coating cycles. The optimum concentration for Eu³⁺ was determined to be 5 mol% of Gd³⁺ in GdVO₄ host.     

Vacuum Ultraviolet Excited Photoluminescence Properties of Y2O2S：Eu^3＋,Bi^3＋ Phosphor

As an Hg-free lamp using phosphor, the Bi^3＋ and EH^3＋ co-doped Y2O2S phosphors were prepared and their luminescence properties under vacuum ultraviolet（VUV） excitation were investigated. The VUV photoluminescent intensity of Y2O2S：Eu^3＋ was weak, however, considerably stronger red emission at 626 nm with good color purity was observed in Y2O2S：Eu^3＋,Bi^3＋ systems. Investigation on the photoluminescence reveals that the strong VUV luminescence of Y2O2S：Eu^3＋,Bi^3＋ at 147 nm is mainly because the Bi^3＋ acts as a medium and effectively performs the energy transfer process： Y^3＋-O^2-→Bi^3＋→Eu^3＋, while the intense emission band at 172 nm is attributed to the absorption of the characteristic ^1So-^1P1 transition of Bi^3＋ and the direct energy transfer from Bi^3＋ to Eu^3＋. The Y2O2S：Eu^3＋,Bi^3＋ shows excellent VUV optical properties compared with the commercial （Y,Gd）BO3：Eu^3＋. Thus, the Y2O2S：Eu^3＋,Bi^3＋ can be a potential red VUV-excited candidate applied in Hg-free lamps for backlight of liquid crystal display.