Glass transition temperature and thermal decomposition of cellulose powder

Cellulose powder and cellulose pellets obtained by pressing the microcrystalline powder were studied using differential scanning calorimetry (DSC), differential thermal analysis (DTA), and thermal gravimetry (TG). The TG method enabled the assessment of water content in the investigated samples. The glass phase transition in cellulose was studied using the DSC method, both in heating and cooling runs, in a wide temperature range from −100 to 180 °C. It is shown that the DSC cooling runs are more suitable for the glass phase transition visualisation than the heating runs. The discrepancy between glass phase transition temperature T _g found using DSC and predictions by Kaelbe’s approach are observed for “dry” (7 and 5.3% water content) cellulose. This could be explained by strong interactions between cellulose chains appearing when the water concentration decreases. The T _g measurements vs. moisture content may be used for cellulose crystallinity index determination.     

Short-wave near-infrared spectroscopy analysis of major compounds in milk powder and wavelength assignment

In this study, short-wave near-infrared (NIR) spectroscopy at 800–1050 nm region was investigated for the analysis of main compounds in milk powder. Through quantitative analysis, the feasibility is further demonstrated for the simultaneous measurement of fat, proteins and carbohydrate in milk powder. Two models, partial least-squares and least-squares support vector machine, were compared and utilized for regression coefficients and loading weights. The affect of standard normal variate spectral pretreatment to model performance was evaluated. Based on the resulted coefficients and loading weights, interesting wavelength regions of nutrition in milk powder are screened and the assignment of all specific wavelengths is firstly proposed in the details associated with chemical base. Instead of the whole short-wave NIR spectral data, these assigned wavelengths which can be reliably exploited were used for the content determination. Compared with other spectroscopy technique, assigned short-wave NIR spectral wavelengths did a good work. Determination coefficients for prediction are 0.981, 0.984, and 0.982, respectively for three components. The proposed wavelength assignment in the short-wave NIR region could be used for the component contents determination of milk powder, and could be as a guidance to interpret the spectra of milk powder.     

Chemical modification of rose leaf with polypyrrole for the removal of Pb (II) and Cd (II) from aqueous solution

The rose leaf was successfully modified through coating with polypyrrole (PPy) in chemical oxidative route in order to remove Pb(II) and Cd(II) from aqueous media. The rose leaf/polypyrrole (RL/PPy) composites were characterized in terms of morphology, chemical structure, and conductivity properties. The spectrum were obtained from FTIR results which support the formation of RL/PPy composites. FTIR and SEM results indicate that the polypyrrole is completely covered on rose leaf. The conductivity of composite (1.8215 S/cm) was higher than polypyrrole (2.06 × 10^?3 S/cm). The metal removal studies were monitored by Ultraviolet Visible Absorption Spectrometer (UV-Vis). The optimum conditions were detected for adsorption by changing some experimental conditions (such as adsorbent dosage, contact time and stirring speed, initial concentration of the metal solutions and pH). Following the determination of the optimum conditions, the results of the metal removal from wastewater studies were performed by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). Under the optimum conditions, the ICP-OES results obtained for waste water showed the useability of composite for the removal of Pb(II) and Cd(II). The Langmuir and Freundlich models are subjected to adsorption datas. The datas fitted better when by using Freundlich model.     

Artificial neural networks for non-destructive determination of acetylspiramycin powder by short-wavelength NIR spectroscopy

The present study has aimed at providing new insight into short-wavelength near-infrared (SW-NIR) spectroscopy (780–1100 nm) for non-destructive quantitative analysis of acetylspiramycin (macrolide antibiotics) powder by using artificial neural networks (ANNs). Presently, it was shown the third vibrational overtone of the CH stretching band can be used to quantitatively determine constituents in pharmaceutical. The third overtone referred to as the SW-NIR region ranges from 780 nm to 1100 nm. In this paper, 156 experimental samples of acetylspiramycin powder were analyzed using ANNs in the 780–1100 nm region of SW-NIR spectra. Four different pretreated methods (first-derivative, second-derivative, standard normal variate (SNV) and multiplicative scatter correction (MSC)) were applied to three sets of SW-NIR spectra of powder samples. The results presented here demonstrate that the SW-NIR region is promising for the fast and reliable determination of major component in pharmaceutical analysis. Degree of approximation as an evaluation criterion of the network was employed, which proved the accuracy of the predicted results.     

Preparation of poly(vinylpyrrolidone)-protected Prussian blue nanoparticles-modified electrode and its electrocatalytic reduction for hemoglobin

In this paper, a novel modified electrode was developed by using highly dispersed Prussian blue (PB) nanoparticles protected by poly(vinylpyrrolidone) (PVP). The size of the nanoparticles was controlled through adjusting the feed ratio of PVP/Fe²⁺. Physical characteristics of the nanocomposite were studied by transmission electron microscopy (TEM), UV-vis, IR spectroscopy, and X-ray powder diffraction (XRPD) analysis. The electrocatalytic reduction of hemoglobin (Hb) at PVP-protected PB nanoparticles (PVP/PB NPs)-modified electrode had been investigated. In addition, the size effects and biocompatibility of PVP/PB NPs for the electrochemistry of Hb were also observed. Experimental results indicated that the reduction peak currents of Hb were linear with its concentrations over the range from 1.0 × 10⁻⁷ to 1.2 × 10⁻⁵ mol/L and the calculated detection limit (S/N = 3) was 4.0 × 10⁻⁸ mol/L.     

纤维素/聚硅氧烷离子液体混合气相色谱固定相的制备

纤维素是液相色谱中应用十分广泛的一类固定相,可是由于涂渍性能不佳,纤维素在气相色谱中的应用鲜有报道。本论文首先通过酯化反应合成了脂溶性较好的三醋酸纤维素（CTA）,然后与自制的聚硅氧烷离子液体（PIL-C12-NTf₂）混配,制备了含纤维素的气相色谱固定相（CTA@PIL-C12-NTf₂）,并涂渍了毛细管柱。其柱效为3165 plates/m（110 ℃,萘,k=4.95）。麦氏常数及溶剂化参数模型的测试结果证明,该固定相属中强极性固定相,主要作用力是氢键碱性作用和偶极作用。值得注意的是,引入纤维素可明显改善三取代芳香化合物位置异构体及壬烷（C9）同分异构体的分离选择性。此外,该固定相对正构烷烃、醇、脂肪酸酯及邻苯二甲酸酯等也具有良好的分离选择性。该研究不仅初步展现了纤维素在分离选择性上的特点,而且也为探索纤维素衍生物在气相色谱中的应用提供了一条新的途径。     

Preparation of Ion Exchange Films for Solid-Phase Spectrophotometry and Solid-Phase Fluorometry

ABSTRACT

Atomic spectroscopy has dominated the field of trace inorganic analysis because of its high sensitivity and selectivity. The advantages gained by the atomic spectroscopies come with the disadvantage of expensive and often complicated instrumentation. Solid-phase spectroscopy, in which the analyte is preconcentrated on a solid medium followed by conventional spectrophotometry or fluorometry, requires less expensive instrumentation and has considerable sensitivity and selectivity. The sensitivity gains come from preconcentration and the use of chromophore (or fluorophore) developers and the selectivity is. achieved by use of ion exchange conditions that favor the analyte in combination with speciative chromophores. Little work has been done to optimize the ion exchange medium (IEM) associated with these techniques. In this paper we present a method for making ion exchange polymer films which considerably simplify the solid-phase spectroscopic techniques. They are mechanically sturdy and optically transparent in the ultraviolet and visible portion of the spectrum, which makes them suitable for spectrophotometry and fluorometry.     

AucoreCoshell纳米粒子的制备、表征及其表面增强拉曼光谱研究

在乙醇体系中和在制备好的Au纳米粒子表面, 用水合肼还原钴盐制备Co壳, 首次通过化学还原法制得核壳结构的Au-Co纳米粒子, 并通过控制钴盐的投料, 得到不同包裹层厚度的AucoreCoshell纳米粒子. 用扫描电子显微镜(SEM)和电化学循环伏安法(CV)等测试方法对其进行表征, 并用吡啶(Py)作为探针分子研究了其SERS效应.     

DDM-PMDA-HAB-噁唑酰亚胺共聚物的合成及其耐热性

DDM-PMDA-HAB-噁唑酰亚胺共聚物的合成及其耐热性;共聚酰胺酸;共聚酰亚胺;噁唑酰亚胺共聚物;聚苯并噁唑;制备;耐热性中     

C60接枝聚(N-乙烯基咔唑)的合成、表征及光电导性能

自从Ｃ６０被发现和被制备出来以后,其特殊的结构和独特的物理和化学性质受到各研究领域学者的广泛青睐．聚（Ｎ－乙烯基咔唑）（ＰＶＫ）体系经 Ｃ６０掺杂后光电导性能有很大幅度提高．但掺杂体系不稳定,因而限制了对该类材料的应用．为了克服这种缺点,我们尝试用各种简单的方法把Ｃ６０化学键合到高分子链中,制备具有光电导性能的Ｃ６０高分子衍生物． 最近,唐本忠［１］和 Ｐａｔｉｌ［２］等分别用常规的自由基聚合方法,将Ｃ６０接枝到聚合物分子主链上,我们已研究了不含导电高分子的Ｃ６０共聚物的光电导性能［３］,本文采用…     

发酵虫草菌粉及产品指纹图谱建立及多指标成分分析

《中国药典》收载的发酵虫草菌粉产品的质量标准中,规定以鸟苷、腺苷、尿苷的含量作为评价相关产品质量的标准.但除此之外,还有许多其他的核苷类成分对发酵虫草菌粉质量控制的影响尚未被探讨.为探究发酵虫草菌粉及产品质控指标选择的合理性,采用超高效液相色谱-紫外检测法对19批发酵虫草菌粉及产品中9种核苷成分(尿嘧啶、胞苷、鸟嘌呤、...     

超声波萃取-高效液相色谱测定咖啡粉和速溶咖啡中的葫芦巴碱

建立了高效液相色谱测定咖啡粉和速溶咖啡中葫芦巴碱含量的方法。采用Waters BondPak NH2色谱柱(250 mm×4.6 mm, 5 μm),以甲醇-水(82:18, v/v)为流动相,流速0.8 mL/min,检测波长260 nm。葫芦巴碱线性范围为1～40 mg/L (相关系数为0.9998)。分别进行日内、日间和人员比对测定葫芦巴碱的重复性试验及加标回收率试验。经测定,样品的加标回收率大于90%,相对标准偏差小于3%。比较了超声波萃取和热浸提萃取方法测定葫芦巴碱含量的差异,两个方法的测定结果符合线性关系,相关系数为0.9964。该法简便、快速、灵敏度高,适用于咖啡豆中葫芦巴碱分析以及咖啡豆原料与制品的质量控制。     

Preparation and Characterization of PVA Hidrogels Nanofibers

Summary: Poly(vinyl alcohol) (PVA) is a biomaterial that has interesting features for applications in soft tissue replacement due to its similarities in the mechanical properties of such tissues. This paper describes the preparation and characterization of PVA fibers obtained by electrospinning and crosslinked with potassium persulfate as thermoinitiator. These PVA fibers were characterized by Scanning Electron Microscopy (SEM) and Optical Microscopy (OM) to analyze the morphology of the spun samples. Finally, Fourier Transform Infrared Spectroscopy (FTIR) and differential scanning calorimetry (DSC) were performed and the results showed that the biomaterial was partially cross-linked, which indicates a potential use for dermal regeneration applications. The morphology of the fibers indicated that structural changes occurred in the biomaterial after thermal crosslinking.     

Preparation,spectroscopic, thermal and powder X‐ray diffraction characterization,and antimicrobial activities of mixed bis(O,O′‐diisopropyldithiophosphato‐S,S′)antimony(III) derivatives with some oxygen and sulfur donor ligands

Newly synthesized mixed bis(O,O′‐diisopropyldithiophosphato‐S,S′)antimony(III) derivatives have been characterized using physicochemical, spectral, thermal and powder X‐ray diffraction studies, and their antimicrobial activities were investigated. These derivatives have nanometric crystallite size (11.39–14.67 nm) with unit cell volume (4968.47 and 5079.79 ų) and lower symmetry (monoclinic) crystal system. After thermal decomposition in inert atmosphere, these derivatives give antimony sulfide as a final decomposition product which has many potential applications, and they exhibit enhanced antimicrobial activities (greater zone of inhibition) as compared to the free ligands and standard drugs (chloroamphenicol and terbinafine were used as standard antibacterial and antifungal drugs, respectively) due to the nanometric size of the complexes.     

Synthesis,X‐ray powder structure analysis and biological properties of a mononuclear Cu(II) complex of N‐2‐hydroxyhippuric acid

A mononuclear copper (II) complex of N‐2‐hydroxyhippuric acid (2HHA), [Cu(HA)(H₂O)₂], has been synthesized and characterized by spectroscopic and X‐ray powder diffraction studies. Crystal structure of [Cu(HA)(H₂O)₂] reveals a distorted square‐pyramidal geometry around the metal center. The crystal packing in the complex exhibits a three‐dimensional framework formed by intermolecular O? ; H···O and C? H···O hydrogen bonds. Toxicity and antitumor properties of the complex have been studied in vivo. The complex, capable of depleting glutathione (GSH) at nontoxic doses, may be utilized to sensitize drug‐resistant cells where resistance is due to an elevated level of GSH. Copyright © 2009 John Wiley & Sons, Ltd.     

纳米钛酸钙粉体的制备及其对水中铅和镉的吸附行为

采用柠檬酸络合溶胶-凝胶法制备了纳米钛酸钙粉体. 以X射线衍射(XRD)、透射电子显微镜(TEM)和傅立叶变换红外光谱(FTIR)对其进行了表征. 考察了该纳米粉体对水中重金属铅和镉的吸附性能, 并以镉离子为例, 系统地研究了吸附热力学和动力学. 结果表明, 该法合成的钛酸钙为钙钛矿结构的纳米粉体, 粒径大小受灼烧温度的影响, 灼烧温度越高, 粉体平均粒径越大, 600 ℃灼烧2 h条件下, 粉体的平均粒径最小, 约为20 nm. 当介质的pH值为4～8时, 钛酸钙对水中的铅和镉具有很强的吸附能力. 其对镉离子的吸附行为符合Langmuir 吸附等温模型和HO准二级动力学方程式, 吸附过程焓变(ΔH)为39.312 kJ•mol－1, 各温度下的自由能变(ΔG)均小于零, 熵变(ΔS)均为正值, 吸附过程的活化能(Ea)为20.359 kJ•mol－1. 该吸附过程是自发的吸热物理过程. 被吸附的铅和镉均可用1 mol•L－1的硝酸完全洗脱回收. 对铅和镉的富集因子均超过200. 将其应用于水中痕量铅和镉的吸附富集和测定, 回收率分别为96.3%～107.2%和93.5%～104.0%, 与石墨炉原子吸收光谱法测定结果一致.     

Preparation, evaluation and application of molecularly imprinted solid-phase microextraction monolith for selective extraction of pirimicarb in tomato and pear

A simple, rapid and sensitive method for the determination of pirimicarb in tomato and pear using polymer monolith microextraction (PMME) based on the molecularly imprinted polymer (MIP) monolith combined with high-performance liquid chromatography-photodiodes array detector (HPLC-PAD) was developed. By optimizing the polymerization conditions, such as the nature of porogenic solvent and functional monomer, the molar ratio of the monomer and cross-linker, an pirimicarb MIP monolith was synthesized in a micropipette tip using methacrylic acid (MAA) as the functional monomer, ethylene dimethacrylate (EGDMA) as the cross-linker and the mixture of toluene-dodecanol as the porogenic solvent. The MIP monolith showed highly specific recognition for the template pirimicarb. The monolith was applied for the selective extraction of pirimicarb in tomato and pear. Several parameters affecting MIP-PMME were investigated, including the nature and volume of extraction solvent, sample volume, flow rate and sample pH. Under the optimum PMME and HPLC conditions, the linear ranges were 2.0-1400 μg/kg for pirimicarb in tomato and pear with the correlation coefficient of above 0.999. The detection limits (s/n=3) were both 0.6 μg/kg. The proposed method was successfully applied for the selective extraction and determination of pirimicarb in tomato and pear.     

固相萃取-超高效液相色谱-串联质谱法测定乳粉和果冻中的氯化胆碱

建立了固相萃取-超高效液相色谱-串联质谱测定乳粉和果冻中氯化胆碱的分析方法。样品在10 mL 0.02mol/L乙酸铵溶液(冰乙酸调节pH至3.0)中水解3 h后离心,上清液经DIKMA ProElut PLS固相萃取柱(60 mg/3 mL)净化后,用Agilent ZORBAX 300 SCX色谱柱(150 mm×2.1 mm,5μm)进行分离,通过电喷雾正离子(ESI~+)模式电离,多反应监测(MRM)模式进行定性和定量分析。方法的检出限(LOD,S/N=3)和定量限(LOQ,S/N=10)分别为0.15 mg/kg和0.50 mg/kg,加标回收率为70.8%~100.2%,相对标准偏差(RSD)均不大于6.83%(n=6)。目标化合物在0.05~8.0 mg/L范围内线性关系良好,线性方程为Y=2.05×10~5X+3.24×10~4,相关系数(r)为0.996。对市售乳粉和果冻中的氯化胆碱进行检测,结果表明,乳粉和果冻中氯化胆碱的含量分别为251.0~2 448 mg/kg和0.261~0.314 mg/kg。该法准确可靠、灵敏度高,适用于乳粉和果冻中氯化胆碱的测定。     

大黄游离羟基蒽醌的TG—DTA和XRD谱图特征分析

中药大黄属蓼科植物,性寒味苦,是中医临床常用药物,具有攻坚破积、活血化瘀、泻火凉血、清热解毒及抗菌、抗炎、调节免疫、抗肿瘤、止血和保健等作用[1].     

Effect of the pH on the complexation of Cu(II), Ni(II) and Fe(III) Ions by a vine leaf litter extract by fluorescence quenching

An extract of dead vine leaves (vitis viniferal) (VLE) was obtained by the extraction procedure for fulvic acids and its interaction (at a concentration of 25mg/L in 0.1 M KNO₃) with the Cu(II), Ni(II) and Fe(III) ions was studied in the pH range between 3 and 6. This interaction was monitored by synchronous molecular fluorescence, since bands due to the fluorescent ligands undergo quenching upon complex formation. After the chemometric isolation of the quenching profiles from the raw spectra by a self-modeling mixture analysis, SIMPLISMA, they were analyzed by two methods: (i) graphical procedures based on the Stern-Volmer model; and (ii) a non-linear least-squares procedure. For the Cu(II) and Ni(II) ions, the treatment by these two methods provided similar values both for the logarithm of the conditional stability constants (log Kc) and the percentage of fluorescent structures that do not participate in the complexation. The log Kc were (standard deviations in parenthesis): Cu(II) ion, 2.4 (3), 3.37(3), 4.4(1) and 4.92(9), respectively, for pH = 3, 4, 5 and 6; Ni(II)ion, 2.9(1), 3.3(2), and 4.09(3), respectively, for pH = 4, 5 and 6. For Fe(III) an interaction with VLE was observed, but no values for Kc could be obtained.