Sub-2-µm sea-urchin-like TiO2 microspheres were prepared through the one-step solvothermal method. Results of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) show that there are a lot of nanorods coming out from the center of the TiO2 microsphere, making it look like a sea urchin. The morphology and structure of these microspheres are very suitable for chromatographic packing. During the separation of inorganic anions on this new stationary phase, the retention mechanism is electrostatic interaction, and the pH of the mobile phase plays an important role in retention behaviors. With this new stationary phase for separation of organic anions and nucleobases, Lewis acid–base interaction is more outstanding, which can cause peak broadening and tail for larger conjugated structure compounds. The separation of aromatic hydrocarbons on this new stationary phase demonstrates that Lewis acid–base interaction has a favorable influence on the separation of electron-rich aromatic hydrocarbons under normal phase chromatographic conditions.
Graphical abstractA simple, efficient and green approach to the synthesis of 1H-pyrazolo[1,2-b]phthalazine-5,10-diones has been developed via one-pot three-component reaction of aromatic aldehyde, malononitrile and phthalhydrazide catalyzed by zinc–proline complex (Zn[L-proline]2) using H2O: PEG400?=?6: 4 as solvent. Atom economy, good to excellent yield, operational simplicity and easy workup are important features of this method.
Graphical abstractExploitation of cotton fabric as electromagnetic interference (EMI) shielding substrates have attracted a growing interest due to their desirable low carbon footprint, economic feasibility, and sustainability. Herein, a facile strategy was proposed for preparing a cellulose-based multifunctional PNIPAAm/PPy hydrogel/cotton (PPHC) EMI shielding composites with simultaneous high-efficient electro-photo-thermal conversion and comfort regulation functions. The PPHC was fabricated via in situ polymerization conductive PPy hydrogel on cotton substrate followed by deposition of PNIPAAm. Benefiting from the unique interconnected three-dimensional networked conductive structure of PPy hydrogel, the obtained PPHC composites exhibited high conductivity (15 mS/cm), and EMI shielding effectiveness (EMI SE?~?40 dB) in the frequency of 8.2–12.3 GHz. Moreover, the PNIPAAm coating endowed the composite fabrics with adjustable wettability performance in response to external temperature, leading to excellent comfort regulation performance. This work provided feasible avenue toward low cost and sustainability cotton-based EMI shielding composites with efficient EMI shielding and comfort regulation performance.
Graphical abstractWe demonstrate a new pathway for the synthesis of carbon nanohorns (CNHs) in a reactor by using inductively coupled plasma (ICP) and gaseous precursors. Thermal plasma synthesis allows the formation of different carbon allotropes such as carbon nanoflakes, hybrid forms of flakes and nanotubules, CNHs embryos, seed-like CNHs and onion-like polyhedral graphitic nanocapsules. In this study, pressure has the greatest impact on the selectivity of carbon nanostructures: pressure below 53.3 kPa favors the growth of carbon nanoflakes and higher pressures, 66.7 kPa and above, promotes the formation of CNHs. The ratio between methane and hydrogen as well as the global concentration of CH4?+?H2 inside the plasma flame are also crucial to the reaction. CNHs are formed preferentially by injection of a 1:2 ratio of H2 to CH4 at 82.7 kPa with a production rate of 20 g/h. The synthesis pathway is easily scalable and could be made continuous, which offers an interesting alternative compared to methods based on laser-, arc- or induction-based vaporization of graphite rods.
Graphical AbstractWe present a new observation of electrochemical oscillation during the reduction of Co2+ from sulfate solution in the presence of but-2-yne-1,4-diol (butynediol) as an additive. Cyclic voltammetry, hydrodynamic voltammetry at galvanostatic condition, and electrochemical impedance spectroscopic studies suggest that the electrochemical oscillation observed was a relaxation type and was the manifestation of adsorbed hydrogen formation by electrochemical reduction of protons on cobalt and their chemical removal by semi-hydrogenation of butynediol to butenediol during the initial stages of electrodeposition.
Graphical abstract
Activated carbon paper-based materials were prepared from softwood pulp, activated carbon powder, and polyester fiber through wet forming process. Then polyethyleneimine was loaded on the activated carbon paper-based materials using physical impregnation method to fabricate green, low cost, and degradable PEI/activated carbon composite paper-based adsorbent materials (PPCA) for the removal of Cr(VI) from drinking water. The surface characteristics of the adsorbent were analyzed by SEM, EDX, BET, FT-IR, and XPS. It was found that the maximum adsorption capacity of Cr(VI) could reach up to 1.58 mg g?1 when the PEI immersion concentration is 1%, the contact time is 180 min, the temperature is 30 °C and pH?=?2. The adsorption of Cr(VI) on PPCA conformed to both the freundlich isotherm model and the quasi-second-order kinetic model, indicating that the adsorption was multi-molecular layer adsorption controlled by chemical reaction process. The adsorption mechanism of Cr(VI) on PPCA included electrostatic attraction, redox and chelation. Overall, this study provides a green, large-scalable production way for the preparation of biodegradable adsorption materials for the efficient removal of Cr(VI) from drinking water aiding the safe management of aqueous system.
Graphical abstractThe cyanate anion (CNO−), formed spontaneously within cells from urea and carbamoyl phosphate, usually functions as a biomarker of some diseases such as chronic kidney disease. Therefore, accurate determination of CNO− is highly demanded. Herein, a 3-amino-2-naphthoic acid-based “turn-on” fluorescence probe was developed for specific detection of CNO−. Upon the addition of sodium cyanate, the weak-fluorescent 3-amino-2-naphthoic acid could react with CNO−, which triggered intense emission of green fluorescence. And up to 9-fold fluorescence enhancement was observed. The fluorescence enhancement ratios displayed a good linear relationship with the concentrations of CNO− in the range of 0.5–200 μM. The high selectivity and sensitivity for CNO− detection were investigated with the detection limit as low as 260 nM. The probe was further successfully applied to determine CNO− in real samples such as tap water, human urine and serum samples, which offered a promising approach in practical applications.
Graphical abstract
To obtain high performance of nanocomposite films made of cellulose nanofibrils (CNFs) and montmorillonites (MMTs), highly ordered nanostructures and abundant interfacial interactions are of extreme importance, especially for CNF film with high MMT content. Here, we tend to unveil the influence of exfoliation degree of MMTs and their interfacial interactions with CNFs on the properties of ensuing nanocomposite films. Monolayer MMTs (ML-MMTs) prefer to form highly ordered nanostructure during water evaporation induced self-assembly. The obtained nanocomposite film with 30 wt% ML-MMTs exhibits a tensile strength of 132 MPa, a total light transmittance of 90.2% (550 nm), and water vapor transmission rate (WVTR) of 41.5 g mm/m2 day, better than the film made of original MMTs (O-MMTs) and CNFs (30 MPa strength, 60% transparency, and 78.7 g mm/m2 day WVTR). Moreover, the physical properties (153 MPa strength and 20.9 g mm/m2 day WVTR) of nanocomposite film can be further enhanced by constructing ionic interactions between the ML-MMT and CNF using 0.5 wt% cationic polyethylenimine (PEI). However, as the amount of PEI continues to increase, its performance will be deteriorated dramatically because of the disordered orientation of ML-MMTs. This work could provide an insight into the fabrication of high performance MMT/CNF nanocomposite film for advanced applications.
Graphical abstractAn electrochemical cycle for the grid energy storage in the redox potential of Fe involves the electrolysis of a highly concentrated aqueous FeCl2 solution yielding solid iron deposits. For the high overall energy efficiency of the cycle, it is crucial to maximize the energy efficiency of the electrolysis process. Here we present a study of the influence of electrolysis parameters on the energy efficiency of such electrolysis, performed in an industrial-type electrolyzer. We studied the conductivity of the FeCl2 solution as a function of concentration and temperature and correlated it with the electrolysis energy efficiency. The deviation from the correlation indicated an important contribution from the conductivity of the ion-exchange membrane. Another important studied parameter was the applied current density. We quantitatively showed how the contribution of the resistance polarization increases with the current density, causing a decrease in overall energy efficiency. The highest energy efficiency of 89 ± 3% was achieved using 2.5 mol L−1 FeCl2 solution at 70 °C and a current density of 0.1 kA m−2. In terms of the energy input per Fe mass, this means 1.88 Wh g−1. The limiting energy input per mass of the Fe deposit was found to be 1.76 Wh g−1.
Graphical abstractA green, highly efficient, and eco-friendly protocol for Knoevenagel–Michael addition reaction is reported in Chickpea leaf exudates (CLE) as a naturally sourced biosurfactant. The reactions between dimedone/4-hydroxycoumarins and a variety of aryl aldehydes were carried out in presence of CLE to afford diketodiols/biscoumarins. The synthetic pathway complies with several key requirements of green chemistry principles such as the employment of natural feedstock as green reaction media, ambient temperature, atom economy along with natural biosurfactant type Bronsted acids, and recyclable and biodegradable catalyst which led to a 28-fold increase in molar efficiency versus industrial standard protocols. Its dynamic phase is confirmed by the optical microscopy technique and critical micelle concentration measurement. The notable advantages of the present protocol were simple work-up procedure, high yield within short reaction time, easy separation of products, avoiding tedious column chromatography thus making the protocol environmentally friendly, sustainable, and economical.
Graphical abstractEucalyptus cellulose is usually pre-treated by oxidation with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO), NaBr and NaClO at pH 10.5 and 25 °C before the mechanical process required to obtain cellulose nanofibers (CNFs). In this study, different aspects to improve the effectiveness and sustainability of the TEMPO-mediated oxidation are analyzed. The optimization was carried out at different reaction times by modifying both the concentration of the NaClO and the amount of the catalysts (TEMPO and NaBr). Results show that the carboxyl groups increased up to 1.1 mmol/g with 5 mmol NaClO/g after 50 min, and that the catalyst concentration can be reduced to 0.025 mmol TEMPO/g and 0.5 mmol NaBr/g to minimize costs while maintaining the high fibrillation degree of the CNFs. The kinetic of the reaction can be considered as zero-order with respect to NaClO, and as first order with respect to cellulose. As a result of this work, the catalyst doses are reduced up to 75% compared to the most widely used catalyst doses (0.1 mmol/g TEMPO and 1 mmol/g NaBr), obtaining highly fibrillated CNFs with a lower environmental impact. This reduction of catalyst doses will reduce the costs and facilitate the implementation of CNF production at industrial scale.
Graphical abstractAluminum sacrificial anodes are currently the first choice for cathodic protection in numerous applications. The galvanic performance of aluminum-based sacrificial anodes is considerably enhanced by addition of certain alloying elements called activators. Recent researches proved that incorporation of specific metal oxides like MnO2, CeO2, RuO2, and IrO2 into the aluminum matrix could enhance the galvanic efficiency of aluminum anodes; however, the mechanism by which metal oxides improve galvanic properties of aluminum is still subject to discussion. The present work investigates the effect of incorporating commercially available low-cost manganese dioxide concentrate into Al-5Zn-0.1Sn sacrificial anodes in different volume fractions. It also studies the influence of heat treatment on anode’s galvanic performance by performing solution treatment at 3 different temperatures (250 °C, 400 °C, 550 °C). The electrochemical testing results proved an increase in efficiency of anodes incorporated with metal oxides and solution treated at 550 °C. The SEM imaging and EDX elemental mapping declared that the presence of SiO2 particles in the anode matrix which might cause effective and uniform corrosion of Al anodes and decreased non-coulombic losses.
Graphical abstractA cellulosic material has been synthesized that could efficiently and selectively adsorb organic and inorganic contaminants from aqueous solutions without interference from competing adsorption sites. Cellulose-graft-tetraethylenepentamine molecular imprinted polymer (C-TEPA-MIP) was synthesized by using 4-nitrophenol (4-NP) as the template. The C-TEPA-MIP adsorbent could adsorb 4-NP and Cr(VI) simultaneously and selectively, without being affected by the competitive adsorption sites of each of these pollutants. The adsorption of 4-NP was predominantly due to the imprinted sites of 4-NP in C-TEPA-MIP that were located inside of the adsorbent, whereas that of Cr(VI) was primarily due to the amine groups of TEPA found on the surface of the adsorbent. Compared with the non-imprint polymer synthesized without the template, C-TEPA-MIP showed higher selectivity for both 4-NP and Cr(VI) in unitary and binary systems. In addition, C-TEPA-MIP exhibited good stability and recyclability for 4-NP, which makes it a promising candidate material for applications concerning wastewater treatment.
Graphical abstractN-Methylpyrrolidine catalyzed, concise and attractive synthesis of a new class of 3-hydroxy-3,5/6-di-aryl-1H-imidazo[1,2-a]imidazol-2(3H)-ones was attained with impressive yields, in the presence of EtOH as a solvent, by means of a convenient and elegant condensation reaction between different aryl glyoxal monohydrates and guanidine hydrochloride under reflux conditions. Some specific merits of the current procedure, including encompasses low operating cost, availability of the starting substrates, reasonable reaction times, high reaction yield, operational simplicity, cleaner reaction profile, no harmful by-products, and the isolated product is in pure form. Structures of all the freshly synthesized products have been deduced by their FT-IR, 1H-NMR, 13C-NMR, Mass spectrometry data and microanalysis.
Graphical abstractIncreasing electromagnetic pollution calls for electromagnetic interference (EMI) shielding materials, especially sustainable, lightweight, and environmentally stable, biomass-based materials. MXene-coated wood (M/wood) is prepared by simply spraying MXene sheets on the wood surface. Varying this spray coating manipulates the shielding performance and its application to different wood species. The M/wood exhibits high electrical conductivity (sheet resistance is only 0.65 Ω/sq) with an excellent EMI shielding effectiveness of 31.1 dB at 8.2?~?12.4 GHz and is also fire retardant. Furthermore, waterborne acrylic resin (WA) is coated on M/wood to enhance environmental stability. The WA coating improves EMI shielding performance stability after water-soaking and drying testing and prevents the peeling of MXene from wood. These satisfactory properties of WA-M/wood and the facile manufacturing approach promote the feasibility of wood-based EMI shielding materials.
Graphical abstractMultifunctional materials for water purification have attracted significant attention due to the increased water pollution problems. However, fabricating the low-cost, effective, and recyclable separation material for wastewater containing various hazardous substances is still a challenge. Herein, we developed an Ag/TiO2@PDMS coated cotton fabric with self-cleaning ability, high flux, superior visible-light photocatalytic ability, and recyclability via the “powder?+?glue” strategy. The composites are superhydrophobic (water contact angle 157°) and show high separation efficiency. After 20 times of repeated use, the separation efficiency remains 16,322 Lm?2 h?1, and methylene blue (MB) 's degradation rate remains almost unchanged. The high oil purification, catalytic property, excellent stability in harsh conditions, and recyclability enable the material as a satisfactory candidate for water purification.
Graphical abstractWith the purpose of fast characterization of electrode reactions, a dynamic electrochemical impedance spectrum (dEIS) measurement system has been assembled which permits the continuous collection of audio-frequency impedance spectra while performing cyclic voltammetry measurements with the usual scan rates of up to 200 mV/s. The performance of this system was tested by analyzing the CV curves and impedance spectra taken simultaneously in ferro-/ferricyanide containing aqueous solutions yielding an experimental demonstration of the connection of the semi-integrated reversible voltammograms and the Warburg coefficients.
Graphical abstract
Exosomes are membrane-bound vesicles secreted by cells, and contain various important biological molecules, such as lipids, proteins, messenger RNAs, microRNAs, and noncoding RNAs. Emerging evidence demonstrates that proteomic analysis of exosomes is of great significance in studying metabolic diseases, tumor metastasis, immune regulation, and so forth. However, exosome proteomic analysis has high requirements with regard to the purity of collected exosomes. Here recent advances in the methods for isolating exosomes and their applications in proteomic analysis are summarized.
Graphical abstract
Clay adsorbents are considered an inexpensive and readily available solution for removing heavy metals, including cadmium, from the environment to reduce pollution. In this study, thiol-modified bentonite (SH-Bent) was prepared by grafting cysteamine hydrochloride onto natural bentonite (Bent). The effects of pH, equilibrium contact time, and temperature on the adsorption–desorption behavior of Cd2+ were studied, and adsorption isotherm models were applied to examine the adsorption behavior of SH-bent. SH-Bent demonstrated better performance and stability for Cd2+ adsorption than Bent. SH-Bent exhibited an enhanced adsorption capacity for Cd2+ at equilibrium of 49.3 mg/g at pH 6, 120 min, and 303 K, which was 42-fold higher than that of Bent under the same conditions. An investigation of the desorption behavior of Cd2+ adsorbed on Bent and SH-Bent in simulated acid rain revealed that SH-Bent has high stability, with a desorption rate of 5.73% at pH 4.5, 60 min, and 303 K, which was much lower than that demonstrated by Bent under the same conditions (45.68%). The Langmuir equation was the best-fitted adsorption isotherm model, closely followed by the Freundlich, Tempkin, and Dubinin–Radushkevich models. A significant difference in diffusion was observed between the two types of clay according to the intraparticle diffusion model. The adsorption–desorption processes of SH-Bent and Bent fit the pseudo-second-order model best among the five kinetic models examined. The information provided in this study can be used to apply thiol-modified clay for wastewater treatment or for the removal of cadmium from soil.
Graphical abstractMetals often are classified as “noble” or “base”—characterizing their reduction potential as one of the most important chemical properties. We show that metals are only as noble as allowed by their environment, i.e. this is a relative term, and the “frame of reference” simply is the solvent in which the redox system is present. We prove that silver is a prime example for a noble metal that forfeits its noble character in the simple ionic liquid HMIM Br (1-hexyl-3-methylimidazolium bromide) as an example for such a solvent.
Graphical Abstract