Development of deep eutectic solvents applied in extraction and separation

Deep eutectic solvents, as an alternative to ionic liquids, have greener credentials than ionic liquids, and have attracted considerable attention in related chemical research. Deep eutectic solvents have attracted increasing attention in chemistry for the extraction and separation of various target compounds from natural products. This review highlights the preparation of deep eutectic solvents, unique properties of deep eutectic solvents, and synthesis of deep‐eutectic‐solvent‐based materials. On the other hand, application in the extraction and separation of deep eutectic solvents is also included in this report. In this paper, the available data and references in this field are reviewed to summarize the applications and developments of deep eutectic solvents. Based on the development of deep eutectic solvents, an exploitation of new deep eutectic solvents and deep eutectic solvents‐based materials is expected to diversify into extraction and separation.     

Advances of responsive deep eutectic solvents and application in extraction and separation of bioactive compounds

In recent years, it has been found that changing ambient conditions (CO₂/N₂, temperature, pH) can trigger a switchable phase transition of deep eutectic solvents, and such solvents are known as responsive deep eutectic solvents. In this work, we present the development history, properties, and preparation of responsive deep eutectic solvents, followed by the application of responsive deep eutectic solvents in the extraction and separation of bioactive compounds are presented. Importantly, the mechanism of responsive deep eutectic solvents in the extraction of bioactive compounds is discussed. Finally, the challenges and prospects of responsive deep eutectic solvents in the extraction and separation of bioactive compounds are proposed. Responsive deep eutectic solvents are considered green and efficient solvents. Some methods for extraction and separation of bioactive compounds by responsive deep eutectic solvents can increase the possibility of recycling the deep eutectic solvents, and provide higher efficiency in the extraction and separation field. It is hoped that this will provide a reference for the green and sustainable extraction and separation of various bioactive compounds.     

大口径毛细管气相色谱检查药物中残留溶剂的方法研究

 以药物合成中常用的 16种有机溶剂为研究对象 ,建立了用大口径毛细管柱检查残留有机溶剂的气相色谱法 ,并考察了不同极性的色谱柱及不同提取溶剂对分离与检测的影响。实验表明 ,根据原料药合成中可能存在的残留溶剂 ,选用适当的提取溶剂 ,采用大口径毛细管气相色谱法检查 ,可获得较满意的结果。     

A mini review on synthesis,properties and applications of deep eutectic solvents

Organic solvents have been of great importance for many chemical synthesis, storage and separation processes. The industries and research laboratories are heavily dependent on organic solvents in bulk; are highly volatile, lipophilic, toxic and causes a number of issues to the human health and the environmental fitness. Neoteric solvents have been proposed as a better substitute to these harmful organic solvents, and scientists have come up with several neoteric solvents in the last three decades, to name a few: ionic liquids (ILs), switchable solvents, bio-based solvents and deep eutectic solvents (DESs). These neoteric solvents attract a great deal of interest from the scientific community due to plenty of possibilities, therefore, they have huge impact and novel studies are reported quite frequently on the same. In this review, we intend to focus to brief on deep eutectic solvents, about their properties, synthesis, promising applications, and how they gradually emerged from ILs and later stood out as a different class of neoteric solvent, which overcomes many shortcomings of ILs. DESs are possibly receptive synthetic compounds and their relationship based on the hydrogen bond donor or acceptor restricts their reactivity and allow to explore in different disciplines of science.     

Use of green alternative solvents in dispersive liquid-liquid microextraction: A review

Dispersive liquid-liquid microextraction is one of the most widely used microextraction techniques currently in the analytical chemistry field, mainly due to its simplicity and rapidity. The operational mode of this approach has been constantly changing since its introduction, adapting to new trends and applications. Most of these changes are related to the nature of the solvent employed for the microextraction. From the classical halogenated solvents (e.g., chloroform or dichloromethane), different alternatives have been proposed in order to obtain safer and non-pollutants microextraction applications. In this sense, low-density solvents, such as alkanols, switchable hydrophobicity solvents, and ionic liquids were the first and most popular replacements for halogenated solvents, which provided similar or better results than these classical dispersive liquid-liquid microextraction solvents. However, despite the good performances obtained with low-density solvents and ionic liquids, researchers have continued investigating in order to obtain even greener solvents for dispersive liquid-liquid microextraction. For that reason, in this review, the evolution over the last five years of the three types of solvents already mentioned and two of the most promising solvent alternatives (i.e., deep eutectic solvents and supramolecular solvents), have been studied in detail with the purpose of discussing which one provides the greenest alternative.     

水杨酸及其酯类化合物在不同溶剂中吸收光谱和荧光光谱的研究

本工作测定了水杨酸和水杨酸甲酯在不同溶剂中的吸收光谱和荧光光谱,并按在不同温度下测得的结果计算出它们在不同溶剂中平衡过程的函变△H.数据表明,在质子溶剂中,上述化合物有较小的△H值,即形成的分子内氢键只有较低的稳定性.根据这些结果可对该类化合物在不同溶剂中形成内氢键的能力作出恰当的评价.     

Solute–Solvent Interactions of Methyl Violet in Different Solvents on Spectral Data

Spectroscopic studies of Methyl violet in protic (water, methanol, ethanol, isopropanol and n-butanol) and aprotic solvents (acetone, DMF) were carried out. UV-Visible absorption spectra of Methyl violet in protic solvents showed a hypsochromic shift, as the solvent polarity was changed from less polar to more polar, while a bathochromic shift was observed for aprotic solvents. Transition energy of Methyl violet in different solvents was correlated with solvatochromic parameters to study solute–solvents interactions. The Kamlet–Taft, Catalan and unified scale models were applied to investigate interactions between Methyl violet and solvents. The best agreement is found for the Catalan model.     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). IV. Influence of solvent type

Methyl methacrylate (MMA) was polymerized by radical initiation at 25°C or 35°C in various solvents in the presence of stereoregular poly(methyl methacrylate) (PMMA). The occurrence of stereospecific replica polymerization appeared to be related to the capability of stereoassociation of isotactic and syndiotactic PMMA. The solvents can be roughly divided into three types. Type A solvents are polar solvents, which promote stereoassociation resulting in gelation and precipitation. Examples are dimethylformamide, dimethyl sulfoxide, and acetone. Type B solvents are nonpolar aromatic solvents like benzene and toluene, wherein stereoassociation is weaker but still leads to gelation. Type C solvents are very good solvents, in which stereoassociation does not occur. Chloroform and dichloromethane belong to this class. In solvents of type A as well as type B, polymerization in the presence of i-PMMA as a polymer matrix was syndiospecific. However, in the presence of s-PMMA as a polymer matrix the polymerization was isospecific only in type A solvents. The syndiotactic or isotactic triad contents of the polymer formed could be as high as ca. 90% at low conversions. In solvents of type C, polymerization in the presence of stereoregular PMMA proceeds according to a normal radical mechanism. Syndiotacticity was always less than 70%. Stereocomplexes formed in situ during replica polymerization were partly crystalline as detected by x-ray diffraction. The highest crystallinity was detected in those formed in type A solvents.     

Shared solvation of sodium ions in alcohol-water solutions explains the non-ideality of free energy of solvation

In order to explain the discrepancies between theories and experiments regarding the non-ideality in the free energy of solvation, here we present a microscopic picture of sodium ions dissolved in water-alcohol mixed solvents. We used X-ray absorption spectroscopy to probe the K-edge of sodium ions in mixed solvents of water and alcohols (methanol, ethanol) and in the respective pure solvents. In the mixed solvents a shared solvation of the sodium ions is observed. We find that specifically the water component plays a key role in stabilizing the solvation shell in mixed solvents, which was revealed by a selective photochemical process occurring only in the pure alcohol solvents.     

Influence des solvants sur la copolymérisation de l'acrylamide avec l'acrylonitrile

The copolymerization of acrylamide with acrylonitrile was investigated in various solvents, which can be put into three groups according to their influence on molecular associations; (1) solvents autoassociated by hydrogen- bonds (acetic acid, methanol, water, dimethylformamide); (2) polar solvents which can associate with the NH group of acrylamide (acetonitrile, dioxane, acetone); (3) inert solvents (toluene, benzene, hexane). The reaction kinetics and the compositions of the copolymers are different for each group of solvents. The composition of copolymers formed in solvents of group 1 vary widely, depend- ing on the solvent. Copolymers formed in all solvents of group 2 have the same composition which is that of copolymers formed in bulk. The amount of acrylamide is highest in copolymers formed in inert solvents of group 3. Such parameters as the degree of conversion, the reaction temperature, the mode of initiation and the extent of dilution only slightly affect the composition of copolymers. Homopolymerizations of acrylamide and acrylonitrile were investigated in all solvent used.The results suggest that the effects of solvents on the copolymerization of acrylamide with acrylonitrile are consequences of the various modes of molecular association of acrylamide. The solvents affect the equilibrium between auto- association of acrylamide and its association with solvent and thereby affect the reactivity of the monomer.     

Solvent polarity induced structural changes in 2,6-diamino-9,10-anthraquinone dye

Photophysical properties of 2,6-diamino-9,10-anthraquinone (2,6-DAAQ) dye have been investigated in different solvents and solvent mixtures. The fluorescence quantum yields, fluorescence lifetimes, radiative rate constants, nonradiative rate constants and absorption and fluorescence spectral characteristics show unusual deviations in the lower polarity aprotic solvents in comparison to those in other aprotic solvents of medium to higher polarities. The results indicate that the dye exists in different structural forms in the lower and in the medium to higher polarity solvents. Drawing an analogy with the results reported for other amino-substituted dyes, it is inferred that 2,6-DAAQ dye adopts a planar intramolecular charge transfer (ICT) structure in medium to higher polarity solvents, where the amino lone pairs are in good resonance with the anthraquinone pi-cloud. In the lower polarity solvents, however, the dye is inferred to exist in a nonplanar structure where the amino lone pairs are not in good resonance with the anthraquinone pi-cloud. Due to these structural differences, the dye displays significantly different photophysical behavior in the lower polarity solvents than in the other solvents of medium to higher polarities. Supportive evidence for the above structural changes has been obtained from ab initio quantum chemical calculations on the structures of the dye under different conditions. Unusual deviations in the photophysical properties of 2,6-DAAQ dye in protic solvents in comparison to those in aprotic solvents of similar polarities are attributed to the intermolecular hydrogen bonding effect involving the OH groups of the protic solvents and the quinonoid oxygens of the dye.     

Kinetics and Mechanism of Monomolecular Heterolysis of Commercial Organohalogen Compounds: XXXI. Solvent Effect on the Rate of 1-Methyl-1-chlorocyclopentane Heterolysis. Correlation Analysis of Solvation Effects

Heterolysis of 1-methyl-1-chlorocyclopentane in protic and aprotic solvents occurs by the E1 mechanism. The reaction rate in aprotic solvents or in a set of protic and aprotic solvents is satisfactorily described by the parameters of the polarity and electrophilicity or ionizing power of the solvents. In protic solvents, the reaction rate grows with increasing polarity or ionizing power of the solvent and decreases with increasing nucleophilicity.     

Solvent extraction of ionic solutes in aqueous solutions

Extraction of ionic solutes in aqueous solutions into various organic solvents is reviewed by showing several examples. The extraction of strong acids into polar organic solvents and nonpolar solvents containing hydrogen-bonding extractants is described as the first example and the extraction of simple metal salts into strongly dielectric or solvating polarsolvents and nonpolar solvents containing solvating extractants is then reported. Finally, the solvent extraction of anionic metal complexes with bulky cations into nonpolar solvents as ion-paris is described and the statistical method for such extraction equilibria is considered.     

Potential use of deep eutectic solvents to facilitate lignocellulosic biomass utilization and conversion

High reliance on crude oil for energy consumption results in the urgent need to explore and develop alternative renewable sources. One of the most promising routes is the transformation of biomass into biofuels and chemicals. The introduction of deep eutectic solvents in 2004 received a considerable amount of attention across different research fields, particularly in biomass processing. The effectiveness of deep eutectic solvents in breaking down the recalcitrant structure in biomass highlights its impact on the transformation of biomass into various value-added products. In addition, deep eutectic solvents are widely regarded as promising “green” solvents due to their low cost, low toxicity, and biodegradable properties. In this paper, some background information on lignocellulosic biomass and deep eutectic solvents is given. Furthermore, the roles of deep eutectic solvents in biomass processing are discussed, focusing on the impacts of deep eutectic solvents on the selectivity of chemical processes and dissolution of biomass. This review also highlights the advantages and limitations of deep eutectic solvents associated with their usage in biomass valorization.     

环境样品酞酸酯分析中溶剂背景的影响

选择环境样品酞酸酯分析中常用的有机溶剂,通过GC-MS对浓缩后的色谱纯、分析纯以及分析纯经过重蒸处理的有机溶剂进行11种酞酸酯背景测定。结果表明这些常用有机溶剂存在一定程度的酞酸酯污染,特别是邻苯二甲酸二正丁酯(DBP)和邻苯二甲酸二(2-乙基)己酯(DEHP)等2种环境样品中常见酞酸酯污染单体,最高浓度可达74.2μg/L(DBP)和64.3μg/L(DEHP)。有机溶剂用量大的酞酸酯分析方法(如土壤提取)需要对提取剂背景进行严格控制。     

Poly(MMA-co-MBA-co-MA-POSS)三元共聚物溶液性质的反气相色谱表征

以20种溶剂作为探针分子,采用反气相色谱技术表征了甲基丙烯酸甲酯-甲基丙烯酸丁酯-甲基丙烯酰氧丙基七环戊基倍半硅氧烷三元共聚物[poly(MMA-co-MBA-co-MA-POSS)]的一系列物理化学性质,并分析了溶剂探针分子与共聚物分子间的相互作用以及共聚物在溶剂中的溶解性.结果表明:在实验温度范围内(343～393K),乙酸甲酯、乙酸乙酯、芳烃、二氯甲烷、三氯甲烷是良溶剂,乙酸丙酯、乙酸丁酯、乙酸戊酯、四氯化碳是中等溶剂,烷烃类和醇类是劣溶剂;随着共聚物中POSS含量的增大,溶剂探针分子溶解聚合物的能力增强,但引入POSS对共聚物的溶度参数无明显影响.     

Dimerization and association of an organophosphoric acid in various organic solvents

The association of bis (p-chlorophenyl) phosphoric acid with various organic solvents as well as its dimerization in these solvents was investigated. In inert solvents like kerosene, carbon tetrachloride and benzene, dimerization is very high and decreases with increasing polarity of the solvent. In polar solvents like alcohols and ketones, a strong association between HA and solvent molecules exists. The association constants were determined; the values may be regarded as a measure for the basicity of the solvents in question. The following order of the increasing basicity of the solvents was established: hydrocarbons and chlorinated hydrocarbons < ethers < ketones < alcohols.     

Determination of impurities in high-purity solvents by neutron activation analysis

The determination of impurities in high-purity solvents, (acetone, isopropanol, trichloroethylene and trichlorotrifluoroethane) used in the production of integrated circuits was carried out by reactor neutron activation analysis. A special vacuum evaporation technique was used for the preconcentration of the solvents. The results showed that sodium and iron are the main impurity components in the solvents and on the other hand the quality of the solvents satisfies the specifications required by high-technology standards. The suspended solid particles in solvents were counted by a Microscopic Image Analysis System (MIAS).     

Effect of sovents on radiation-induced ionic graft polymerization

The influence of various solvents on radiation-induced cationic (grafting of vinyl-n-butyl ether onto polyethylene) and anionic (grafting of 2-methyl-5-vinylpyridine onto polyethylene) graft polymerization was studied. This ionic grafting was performed in thoroughly dried systems at room temperature. It was established that electron-acceptor solvents promote cationic grafting but that electron-donor solvents promote the anionic. A clear correlation between the donor number of solvents and grafting value by the anionic mechanism was shown. There was no correlation between dielectric constants and grafting values. The reaction orders, according to monomer concentration by 2-methyl-5-vinylpyridine grafting in various solvents, were equal to approximately 1.5 and 2 for the radical and anionic mechanisms, respectively. The effect of solvents on radiation-induced ionic graft polymerization is discussed. The results of this study indicate the correct choice of solvents for radiation-induced ionic grafting.     

Effect of solvent properties on permeate flow through nanofiltration membranes. Part I: investigation of parameters affecting solvent flux

The objective of the present study was to characterize transport properties of solvents permeating through solvent resistant nanofiltration membranes that have only recently become available. Permeation flows of a number of solvents of different chemical families were measured in a batch cell. The solvents studied were alcohols, paraffins, ketones, acetates, and water, as well as their binary mixtures. The experimental data revealed a marked variation in the level of permeate flux among the various solvents. For instance, permeation flow of pentane was about 60-times faster compared to that of water while permeation flow of ethanol was about 10-times faster than that of water. The dependence of solution flux on the fractional composition of the solvents in the mixture was found to be highly non-linear. The flux of either pure or mixed solvents was mainly affected by surface tension and viscosity of the solvents. The flux of paraffins mixtures in particular was affected by the dielectric constant also.