Theoretical study on gas-phase conformations and vibrational assignment of methylphenidate

The molecular geometry, the normal mode frequencies and corresponding vibrational assignments of methylphenidate in the ground state were performed by DFT/B3LYP level of theory using the 6-311++G(d, p) basis set. Harmonic vibrational frequencies were calculated. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The conformational stabilities and optimized geometrical parameters have been carried out with density functional theory with 6-311++G(d, p) basic set by the DFT/B3LYP method. The frequency calculations have been performed with DFT to study the vibrational properties and their dependence on the molecular conformation.     

Structural elucidation of nitro-substituted five-membered aromatic heterocycles utilizing GIAO DFT calculations

The GIAO (Gauge Including Atomic Orbitals) DFT (Density Functional Theory) method is applied at the B3LYP/6-31+G(d,p)//B3LYP/6-31+G(d), B3LYP/6-311++G(d,p)//B3LYP/6-31+G(d), B3LYP/6-311+G (2d,p)//B3LYP/6-31+G(d) and B3LYP/6-311++G(d,p)//B3LYP/6-311++G(d,p) levels of theory for the calculation of proton and carbon chemicals shifts and coupling constants for 25 nitro-substituted five-membered heterocycles. Difference (1D NOE) spectra in combination with long-range gHMBC experiments were used as tools for the structural elucidation of nitro-substituted five-membered heterocycles. The assigned NMR data (chemical shifts and coupling constants) for all compounds were found to be in good agreement with theoretical calculations using the GIAO DFT method. The magnitudes of one-bond (1JCH) and long-range (nJCH, n>1) coupling constants were utilized for unambiguous differentiation between regioisomers of nitro-substituted five-membered heterocycles.     

NMR spectra, GIAO and charge density calculations of five-membered aromatic heterocycles

The B3LYP/6-31+G(d) molecular geometry optimized structures of 17 five-membered heterocycles were employed together with the gauge including atomic orbitals (GIAO) density functional theory (DFT) method at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p) and B3LYP/6-311+G(2d,p) levels of theory for the calculation of proton and carbon chemicals shifts and coupling constants. The method of geometry optimization for pyrrole (1), N-methylpyrrole (2) and thiophene (7) using the larger 6-311++G(d,p) basis sets at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p), B3LYP/6-31+G(2d,p) and B3LYP/cc-pVTZ levels of theory gave little difference between calculated and experimental values of coupling constants. In general, the (1)H and 13C chemical shifts for all compounds are in good agreement with theoretical calculations using the smaller 6-31 basis set. The values of nJHH(n=3, 4, 5) and rmnJ(CH)(n=1, 2, 3, 4) were predicted well using the larger 6-31+G(d,p) and 6-311++G(d,p) basis sets and at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p), B3LYP/6-31+G(2d,2p) levels of theory. The computed atomic charges [Mülliken; Natural Bond Orbital Analysis (NBO); Merz-Kollman (MK); CHELP and CHELPG] for the B3LYP/6-311++G(d,p) geometry optimized structures of 1-17 were used to explore correlations with the experimental proton and carbon chemical shifts.     

Experimental (FT-IR and FT-Raman), electronic structure and DFT studies on 1-methoxynaphthalene

In this work, FT-IR and FT-Raman spectra of 1-methoxynapthalene (C(11)H(10)O) have been reported in the regions 4000-400 cm(-1) and 3500-100 cm(-1), respectively. Density functional method (DFT) has been used to calculate the optimized geometrical parameters, atomic charges, vibrational wavenumbers and intensity of the vibrational bands. The vibrational frequencies have been calculated and scaled values are compared with experimental FT-IR and FT-Raman spectra. The structure optimizations and normal coordinate force field calculations are based on density functional theory (DFT) method with B3LYP/3-21G, B3LYP/6-31G, B3LYP/6-31G(d,p) and B3LYP/6-311++G(d,p) basis sets. The complete vibrational assignments of wavenumbers are made on the basis of potential energy distribution (PED). The optimized geometric parameters are compared with experimental values of naphthoic acid. The results of the calculation shows excellent agreement between experimental and calculated frequencies in B3LYP/6-311++G(d,p) basis set. The effects due to the substitutions of methyl group and carbon-oxygen bond are also investigated. A study on the electronic properties, such as excitation energies and wavelengths, were performed by time-dependent DFT (TD-DFT) approach. HOMO and LUMO energies are calculated that these energies show charge transfer occurs within the molecule.     

Molecular structure, vibrational spectra and NBO analysis of phenylisothiocyanate by density functional method

The molecular geometry, vibrational frequencies and NBO analysis of phenylisothiocyanate (PITC) in the ground state have been calculated by using density functional theory calculation (B3LYP) with 6-311++G(d,p) basis set. The optimized geometrical parameters obtained by DFT calculations are in good agreement with experimental values. Comparison of the observed fundamental vibrational frequencies of the PITC and calculated result by density functional theory (B3LYP) indicates B3LYP is superior for molecular vibrational problems. The entropy of the title compound was also performed at HF/B3LYP/6-311++G(d,p) levels of theory. Natural bond orbital (NBO) analysis of title molecule is also carried out. A detailed interpretation of the IR and Raman spectra of PITC is reported on the basis of the calculated potential energy distribution (PED). The theoretical spectrogram for IR spectrum of the title molecule has been constructed.     

Molecular structure and vibrational analysis of 3-Ethylpyridine using ab initio HF and density functional theory (B3LYP) calculations

The FT-Raman and FT-IR spectra for 3-Ethylpyridine (3-EP) have been recorded in the region 4000-100 cm(-1) and compared with the harmonic vibrational frequencies calculated using HF/DFT (B3LYP) method by employing 6-31G(d,p) and 6-311++G(d,p) basis set with appropriate scale factors. IR intensities and Raman activities are also calculated by HF and DFT (B3LYP) methods. Optimized geometries of the molecule have been interpreted and compared with the reported experimental values of some substituted benzene. The experimental geometrical parameters show satisfactory agreement with the theoretical prediction from HF and DFT. The scaled vibrational frequencies at B3LYP/6-311++G(d,p) seem to coincide with the experimentally observed values with acceptable deviations. The theoretical spectrograms (IR and Raman) have been constructed and compared with the experimental FT-IR and FT-Raman spectra. Some of the vibrational frequencies of the pyridine are effected upon profusely with the C2H5 substitutions in comparison to pyridine and these differences are interpreted.     

FT-IR and FT-Raman spectroscopic investigation, computed vibrational frequency analysis and IR intensity and Raman activity peak resemblance analysis on 2-nitroanisole using HF and DFT (B3LYP and B3PW91) calculations

Fourier-transform Raman and infrared spectra of 2-nitroanisole are recorded (4000-100 cm(-1)) and interpreted by comparison with respective theoretical spectra calculated using HF and DFT method. The geometrical parameters with C(S) symmetry, harmonic vibrational frequencies, infrared and Raman scattering intensities are determined using HF/6-311++G (d, p), B3LYP/6-311+G (d, p), B3LYP/6-311++G (d, p) and B3PW91/6-311++G (d, p) level of theories. A detailed vibrational spectral analysis has been carried out and assignments of the observed fundamental bands have been proposed on the basis of peak positions and relative intensities. The results of the calculations have been used to simulate IR and Raman spectra for the molecule that showed good agreement with the observed spectra. The SQM method, which implies multiple scaling of the DFT force fields has been shown superior to the uniform scaling approach. The vibrational frequencies and the infrared intensities of the C-H modes involved in back-donation and conjugation are also investigated.     

Conformational analysis of 2,5-diaryl-4-methyl-2,4-dihydro-3H-1,2,4-triazol-3-ones: Multinuclear NMR and DFT calculations

Conformational exploration of five 2,5-diaryl-4-methyl-2,4-dihydro-3H-1,2,4-triazol-3-ones has been carried out based on a combination of their NMR chemical shifts determined in CDCl₃ and the scrutiny of their computed relative energies and absolute shieldings calculated at the DFT/GIAO/B3LYP/6–311++G(d,p) level. The very flat potential energy curves corresponding to the three relevant single bond rotations were explored by calculating the energy of the rotational barriers and comparing the experimental chemical shifts with those theoretically calculated in each rotamer by statistical analysis.     

乙醇-水分子团簇C2H5OH(H2O)n (n=1-9)稳定结构的量子化学研究

采用密度泛函理论B3LYP方法, 在B3LYP/6-311++G(2d,2p)//B3LYP/6-311++G(d,p)基组水平上对乙醇-水分子团簇(C₂H₅OH(H₂O)_n (n=1-9))的各种性质进行研究, 如: 优化的几何构型、结构参数、氢键、结合能、平均氢键强度、自然键轨道(NBO)电荷分布、团簇的生长规律等. 结果表明, 从二维(2-D)环状结构到三维(3-D)笼状结构的过渡出现在n=5的乙醇-水分子团簇中. 此外, 利用团簇结合能的二阶差分、形成能、能隙等性质, 发现在n=6时乙醇-水分子团簇的最低能量结构稳定性较好, 可能为幻数结构. 最后, 为了进一步探讨氢键本质, 将C₂H₅OH(H₂O)_n (n=2-9)最低能量结构的各种性质与纯水分子团簇(H₂O)_n (n=3-10)比较, 结果表明前者与后者中的水分子之间氢键相似.     

Quantum chemical computations of 1,3-phenylenediacetic acid

Molecular geometry, vibrational wavenumbers and gauge including atomic orbital (GIAO) 13C NMR and 1H NMR chemical shift values of 1,3-phenylenediacetic acid (C10H10O4), in the ground state have been calculated by using ab initio Hartree-Fock (HF) and density functional theory (DFT/B3LYP) methods with 6-311++G(d,p) basis set for the first time. Comparison of the observed fundamental vibrational modes of 1,3-phenylenediacetic acid and calculated results by density functional B3LYP and Hartree-Fock methods indicate that B3LYP is superior to the scaled Hartree-Fock approach for quantum chemical studies. Geometric parameters (bond lengths and bond angles) and vibrational wavenumbers obtained by the HF and DFT/B3LYP methods are in good agreement with the experimental data. Furthermore, this is the first time the results of the calculated JCH and JCC coupling constants of the C10H10O4 molecule are presented in this study.     

Evaluation of the enthalpy of formation, proton affinity, and gas-phase basicity of gamma-butyrolactone and 2-pyrrolidinone by isodesmic reactions

The knowledge of thermochemical parameters such as the enthalpy of formation, gas-phase basicity, and proton affinity may be the key to understanding molecular reactivity. The obtention of these thermochemical parameters by theoretical chemical models may be advantageous when experimental measurements are difficult to accomplish. The development of ab initio composite models represents a major advance in the obtention of these thermochemical parameters, but these methods do not always lead to accurate values. Aiming at achieving a comparison between the ab initio models and the hybrid models based on the density functional theory (DFT), we have studied gamma-butyrolactone and 2-pyrrolidinone with a goal of obtaining high-quality thermochemical parameters using the composite chemical models G2, G2MP2, MP2, G3, CBS-Q, CBS-4, and CBS-QB3; the DFT methods B3LYP, B3P86, PW91PW91, mPW1PW, and B98; and the basis sets 6-31G(d), 6-31+G(d), 6-31G(d,p), 6-31+G(d,p), 6-31++G(d,p), 6-311G(d), 6-311+G(d), 6-311G(d,p), 6-311+G(d,p), 6-311++G(d,p), aug-cc-pVDZ, and aug-cc-pVTZ. Values obtained for the enthalpies of formation, proton affinity, and gas-phase basicity of the two target molecules were compared to the experimental data reported in the literature. The best results were achieved with the use of DFT models, and the B3LYP method led to the most accurate data.     

The molecular structure of fluoromalononitrile as determined by gas-phase electron diffraction and ab initio calculations

The molecular structure of fluoromalononitrile was studied by means of gas-phase electron diffraction and quantum mechanical methods using HF/6-31G(d), MP2/6-311++G(2df,2pd) and DFT/B3LYP/6-31G(d), B3PW91/6-31G(d), B3LYP/6-311++G(2df,2pd) and B3PW91/6-311++G(2df,2pd). The r(g) and angle(alpha) structural parameters we obtained from the present analysis are: CC=1.487(5) A, CN=1.157(3) A, CF=1.386(5) A, CH=1.096 A (ass.), angleCCC=106.7(1.0) degrees , angleCCF=108.0(0.7) degrees , angleCCN=177.6(2.0) degrees . Uncertainties in parenthesis are 3sigma.     

NMR spectra of salicylohydroxamic acid in DMSO-d6 solution: a DFT study

The ¹H, ¹³C and ¹H, ¹³C COSY NMR spectra of salicylohydroxamic acid (sha) were measured in DMSO-d₆ solution. The B3LYP GIAO method with the 6-311++G(d,p) basis set was chosen to reproduce the experimental spectra. All possible zusammen and entgegen conformers of monomeric sha were computed. After geometry optimisation (B3LYP/6-311++G(d,p)) only nine independent models of the molecule were shown to be stable. Additionally, the NMR chemical shifts of the Onsager model of the most stable monomer were calculated. The computed chemical shifts for the labile protons for all aforementioned geometries meaningfully underestimated experimental results suggesting the existence of the H-bonded structure of sha in DMSO solution. The most probable two dimeric structures along with two solvent-bounded aggregates were subsequently calculated at the same level of theory. The best agreement was obtained for sha H-bonded with two DMSO molecules (confirmed by the absence of concentration effect). The relative error not exceeding 10 and 4% for chemical shifts in ¹H and ¹³C NMR spectra of sha–(DMSO)₂, respectively, showed that the applied method with the B3LYP/6-311++G(d,p) basis set was efficient to predict the NMR shifts of a compound with strong H-bonds. Thus, this allows to assign properly NMR resonances to specific structure formed in DMSO solution.     

FT-IR and FT-Raman investigation, computed vibrational intensity analysis and computed vibrational frequency analysis on m-Xylol using ab-initio HF and DFT calculations

The FT-IR and FT-Raman spectra of m-Xylol molecule have been recorded using Bruker IFS 66V spectrometer in the range 4000-100cm(-1). The molecular geometry and vibrational frequencies in the ground state are evaluated using the Hartree-fock (HF) and B3LYP with 6-31+G (d, p), 6-31++G (d, p) and 6-311++G (d, p) basis sets. The computed frequencies are scaled using a suitable scale factors to yield good agreement with the observed values. The HF and DFT analysis agree well with experimental observations. Comparison of the fundamental vibrational frequencies with calculated results by HF and B3LYP methods indicate that B3LYP/6-311++G (d, p) is superior to HF/6-31+G (d, p) for molecular vibrational problems. The complete data of this title compound provide some useful information for the study of substituted benzenes. The influences of Methyl groups on the geometry of benzene and its normal modes of vibrations have also been discussed.     

Inductive effects in radicals calculated from DFT energies; substituted bicyclo[2.2.2]octan-1-yloxy radicals

Energies of a series of 4-substituted 1-oxybicyclo[2.2.2]octan-1-yloxy radicals with 18 various substituents were calculated within the framework of the DFT theory at the levels UB3LYP/6-311+G(d,p)//UB3LYP/6-311+G(d,p) and UB3LYP/6-311++G(2df,p)//UB3LYP/6-311+G(d,p) and compared with similar series of the parent alcohols, their deprotonated and protonated forms calculated at the levels B3LYP/6-311+G(d,p)//B3LYP/6-311+G(d,p) and B3LYP/6-311++G(2df,p)//B3LYP/6-311+G(d,p). The two levels are of the same performance and both are sufficient for molecules of this type according to comparison with scarce experimental gas-phase acidities and basicities. The substituent effects were analyzed in terms of isodesmic equations. In addition to strong dependence on the substituent inductive effect, a slight dependence on the electronegativity of the first atom of the substituent was proven in certain cases. In all aspects, there is no qualitative difference between the effects on radicals and on similar closed shell species. Radicals behave as slightly electron deficient; the substituent effect is weaker than that on the ions but stronger than on neutral molecules.     

Structure Elucidation and Theoretical Investigation of Key Steps in the Biogenetic Pathway of Schisanartane Nortriterpenoids by Using DFT Methods

Rubrifloradilactone C ( 4 ), a novel bioactive nortriterpenoid, along with four other nortriterpenoids ( 1 – 3 , 5 ) were isolated from Schisandra rubriflora. The structure of 4 was determined by extensive NMR spectral analysis, computational evidence by using the GIAO method at the B3LYP/6–311++G(2d,p)//B3LYP/6–31G(d) levels, and X‐ray analysis. DFT at the B3LYP/6–311+G(d,p) level was selected to clarify the key mechanistic steps in the formation of 1 and 4 through transition‐state (TS) investigations. The effect of enzymes on the TS barriers was considered by using the polarized continuum model. Other possible products based on the new mechanism were predicted.     

Molecular structure and vibrational spectra of indole and 5-aminoindole by density functional theory and ab initio Hartree–Fock calculations

The molecular geometry and vibrational frequencies of indole and 5-aminoindole in the ground state have been calculated by using the Hartree–Fock and density functional method with 6-311++G(d,p) basis set. The optimized geometrical parameters obtained by DFT calculations are in good agreement with the experimental values. Comparison of the observed fundamental vibrational frequencies of indole and 5-aminoindole with the calculated results by density functional and Hartree–Fock methods indicates that B3LYP is superior to the scaled Hartree–Fock approach for molecular vibrational problems. The theoretical spectrograms for FT-IR spectrum of 5-aminoindole have been constructed.     

Synthesis, spectroscopic characterization, X-ray structure and DFT studies on 4-(2-hydroxyphenyl)-4,5,6,7-tetrahydro-1H-imidazo[4,5-c]pyridin-5-ium chloride hydrate

The title molecular salt, 4-(2-hydroxyphenyl)-4,5,6,7-tetrahydro-1H-imidazo[4,5-c]pyridin-5-ium chloride hydrate (C₁₂H₁₄N₃O⁺·Clˉ·H₂O), was synthesized and characterized by IR-NMR spectroscopy and single-crystal X-ray diffraction. In addition to the molecular geometry from X-ray experiment, the molecular geometry, vibrational frequencies and gauge-independent atomic orbital (GIAO) ¹H and ¹³C NMR chemical shift values of the title compound in the ground state have been calculated using the density functional theory (DFT/B3LYP) method with the 6-31++G(d,p) and 6-311++G(d,p) basis sets, and compared with the experimental data. Besides, molecular electrostatic potential (MEP) distribution and non-linear optical properties of the title compound were investigated by theoretical calculations at the B3LYP/6-311++G(d,p) level.     

GIAO/DFT studies on 1,2,4‐triazole‐5‐thiones and their propargyl derivatives

Density functional theory (DFT)/Becke–Lee–Yang–Parr (B3LYP) and gauge‐including atomic orbital (GIAO) calculations were performed on a number of 1,2,4‐triazole derivatives, and the optimized structural parameters were employed to ascertain the nature of their predominant tautomers. ¹³C and ¹⁵N NMR chemical shifts of 3‐substituted 1,2,4‐triazole‐5‐thiones and their propargylated derivatives were calculated via GIAO/DFT approach at the B3LYP level of theory with geometry optimization using a 6‐311++G** basis set. A good agreement between theoretical and experimental ¹³C and ¹⁵N NMR chemical shifts could be found for the systems investigated. The data generated were useful in predicting ¹⁵N chemical shifts of all the nitrogen atoms of the triazole ring, some of which could not be obtained in solution state ¹⁵N HMBC/HSQC NMR measurements. The energy profile computed for the dipropargylated derivatives was found to follow the product distribution profile of regioisomers formed during propargylation of 1,2,4‐triazole thiones. Copyright © 2013 John Wiley & Sons, Ltd.