Applicability of winged bean extracts as organic corrosion inhibitors for reinforced steel in 0.5 ​M HCl electrolyte

Corrosion inhibition properties of winged bean (WB) extracts on reinforced steel in 0.5 ?M HCl solution was studied through experimental and theoretical calculation methods. The electrochemical studies suggested that inhibition efficiency increased with increasing concentration of WB extracts up to 95%. Nyquist diagrams revealed an increase in the charge transfer resistance values and a decrease in the constant phase element as the concentration of WB extracts were increased. The potentiodynamic polarization results revealed that WB extracts behave as mixed-type inhibitors, which physically adsorbed onto the reinforced steel surface. Effect of temperature study demonstrated that the corrosion resistance behaviour of WB extracts decreased with an increase in temperature, yielding a corrosion rate of 3.39 mmpy and 4.02 mmpy at 333 ?K with the incorporation of 1000 ?ppm WBW and WBE extracts, respectively. The thermodynamic study implied that the adsorption process follows the Langmuir isotherm with free energy adsorption of ΔG_ads WBW ?= ?-17.29 ?kJ ?mol^-1 and ΔG_ads WBE ?= ?-16.81 ?kJ ?mol^-1. Corresponding to the molecular modelling study, the semi-empirical method and molecular dynamics (MD) simulation investigated the correlation between the inhibitor compounds and the metal surface. One of the phenolic molecule constituents (gallic acid) was chosen to establish the structural and electronic parameters responsible for the high inhibition efficiency. A greater E_binding of 0.181 (a.u.) indicates that gallic acid in WB extracts can easily bind with the Fe surface, thus projecting a higher inhibitory performance. Surface morphology study affirmed the effective adsorption of WB extracts onto the surface of reinforced steel.     

Experimental and theoretical studies of acridine orange as corrosion inhibitor for copper protection in acidic media

The corrosion process commonly limits the use of copper in practical applications. The use of corrosion inhibitors is one of the effective methods to reduce the corrosion rate of copper. In this research, the inhibition effect of acridine orange (3,6-bis(dimethylamine)acridine) (AcO) for the protection of copper in 0.5 ?M ?H₂SO₄ solution was studied. For this aim, the change of open circuit potential with exposure time (E_ocp-t), electrochemical impedance spectroscopy (EIS), linear polarization resistance (LPR), anodic and cathodic potentiodynamic polarization measurements (PP) and chronoamperometry (CA) techniques were used. Some quantum chemical parameters (E_HOMO, E_LUMO and dipole moment) were calculated and discussed. The AcO film formed over the copper surface was examined by SEM, EDX, AFM and contact angle measurements. The electrochemical data showed that AcO is an effective corrosion inhibitor even at low concentrations (ranging between 99.1% and %99.4 ?at concentrations from 0.01 ?mM to 1 ?mM). The corrosion rate of copper decreases in the presence of the inhibitor by reducing both anodic and cathodic rates, which is depended on its concentration. This compound behaves as mixed-type corrosion inhibitors with predominantly cathodic type. Its adsorption on the copper surface obeys Langmuir adsorption isotherm. The value of adsorption equilibrium constant (K_ads) and the standard free energy of adsorption were ΔG_ads 1.298 x 10³ ?M^?1 and -27.71 ?kJ/mol in the case of 0.5 ?M ?H₂SO₄ solution containing 1.0 ?mM AcO, which shows the adsorption is high and spontaneous. The adsorbed inhibitor film over the metal increase contact angle of the surface, which suggests the more hydrophobic properties of the surface are increasing coming from the orientation of hydrophobic sites to the electrolyte. The zero charge potential (E_pzc) studies showed that the surface charge of the metal is positive in the corrosive media containing the inhibitor. Quantum chemical calculations showed that the binding of inhibitor molecules to the metal surface takes place through N atoms of the inhibitor.     

Corrosion Behavior of Carbon Steel in Lithium Bromide Solution

Weight‐loss tests and electrochemical techniques are used to study the inhibition of BTA and Na₂MoO₄ either individually or in different combinations for carbon steel in boiling 10.24 mol/L LiBr solution containing 0.07 mol/L LiOH. The result indicates the corrosion of carbon steel is effectively inhibited when BTA or Na₂MoO₄ is added to the solution individually. The adsorptions of BTA or Na₂MoO₄ on carbon steel surfaces can be well fitted to a Langmuir adsorption isotherm. The free energy of adsorption of BTA and Na₂MoO₄ are ?45.07 kJ/mol and ?40.69 kJ/mol, respectively. The corrosion rate is decreased to the minimal value, which is 8.39 μm/y, when 7.28 × 10^?4 mol/L Na₂MoO₄ and 8.39 × 10^?4 mol/L BTA are added to a 10.24 mol/L LiBr solution containing 0.07 mol/L LiOH. The inhibition mechanism of the above mixed inhibitors results from the complemental effect of the compact inner layer film composed of Fe‐BTA and the absorbed MoO₄^2? in small quantity of the active site and the outer layer. The passive film of the coordination compound and the adsorbed MoO₄^2? prevent Br^? from absorbing and effectively decrease the corrosion of carbon steel.     

Dissolved carbon dioxide effect on the behavior of carbon steel in a simulated solution at different temperatures and immersion times

Dissolved carbon dioxide effect on the behavior of carbon steel (0.4%carbon), in a simulated solution at different temperatures and immersion times, has been investigated using different techniques as potentiodynamic polarization, linear polarization resistance, and electrochemical impedance spectroscopy. The observation of the steel surface was done by scanning electron microscopy. All measurements reveal that the corrosion resistance is strongly dependent on both the temperature and immersion times. The corrosion resistance of carbon steel decreases in the solution considered as the temperature increases from 20?°C to 50?°C. Potentiodynamic polarization curves showed that cathodic and anodic current densities increase with the increased temperature. Besides, the study concluded that the addition of CO₂ gas to the simulated solution affects negatively the corrosion resistance in one hand and that, on the other hand, the higher the time of immersion the higher is the resistance to corrosion.     

Corrosion resistances of passive films on low‐Cr steel and carbon steel in simulated concrete pore solution

The passive ranges of carbon steel rebar and 3Cr steel rebar in saturated Ca(OH)₂‐simulated concrete pore solution with pH 12.6 were determined by means of cyclic voltammetry and potentiodynamic polarization curves. Chronopotentiometry was used to obtain steady‐state conditions for the formation of passive films on rebar samples at different anodic potentials. Electrochemical impedance spectroscopy, Mott–Schottky and X‐ray photoelectron spectrometer curves were employed to compare the formed passive films at different potentials. Additionally, cyclic polarization curves were used to compare the corrosion resistances of formed passive films on the two rebars in saturated Ca(OH)₂‐simulated concrete pore solution with different concentration of Cl^?. The results show that the passive ranges of the two rebars are all between ?0.15 and +0.6 V, and more stable passive films can be formed on both rebars at the anodic potential of +0.3 V. In the absence of Cl^?, the stability and corrosion resistance of the passive film formed on the 3Cr rebar are better than those of CS rebar. The passive film of 3Cr steel has the relatively better pitting corrosion resistance than carbon steel in saturated Ca(OH)₂‐simulated concrete pore solution that contains different concentration of Cl^?. Copyright © 2016 John Wiley & Sons, Ltd.     

The inhibitory effect of bipyridine and its cobalt complex on the corrosion behaviour of carbon steel in acidic medium

The bipyridine (bipy) and its cobalt complex (Co-bipy) were tested as corrosion inhibitors for N80 carbon steel in 0.1 M H₂SO₄ solution by electrochemical polarization and electrochemical impedance spectroscopy (EIS) method. Scanning electron microscopy (SEM) techniques were used to characterize the mild steel surface. The test results showed that the complex and ligand are mixed-type inhibitors and the compounds are adsorbed on the steel surface according to Temkin adsorption isotherm. The inhibition efficiency of the inhibitors follows the trend Co-bipy > bipy. The adsorption of the inhibitors can be classifies as physical adsorption.     

嘧啶衍生物对钢在盐酸溶液中的缓蚀作用

采用失重法、动电位极化曲线、电化学阻抗谱(EIS)、量子化学计算研究了两种嘧啶衍生物(2-羟基嘧啶(HP)和2-巯基嘧啶(MP))在1.0-5.0 mol·L^-1 HCl溶液中对冷轧钢(CRS)的缓蚀作用. 结果表明: HP和MP在1.0 mol·L^-1 HCl溶液中对冷轧钢具有良好的缓蚀作用, 且在钢表面的吸附符合Langmuir吸附等温式. 缓蚀率随缓蚀剂浓度的增加而增大, 但随盐酸浓度的增加而减小.求出了相应的吸附热力学参数(吸附平衡常数(K),吸附自由能(ΔG⁰))和腐蚀动力学参数(表观活化能(E_a)、指前因子(A)、腐蚀速率常数(k)、动力学常数(B)), 并根据这些参数讨论了缓蚀作用机理. 动电位极化曲线表明, MP和HP均为混合抑制型缓蚀剂; EIS谱呈单一容抗弧,电荷转移电阻随缓蚀剂浓度的增加而增大. 两种嘧啶化合物的缓蚀率排序为MP>HP. 量子化学计算结果表明,MP比HP更具吸附活性,缓蚀性能的理论计算和实验结果相一致.     

Combined Experimental and Theoretical Insights into the Corrosion Inhibition Activity on Carbon Steel Iron of Phosphonic Acids

The inhibition effect of N,N′-phosphonomethylglycine (PMG) and vinyl phosphonic acid (VPA) on the 3% NaCl acidic solution corrosion of carbon steel iron was studied at different immersion times by potentiodynamic polarization, electrochemical impedance spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and computational methods. It is found from the polarization studies that PMG and VPA behave as mixed-type inhibitors in NaCl. Values of charge transfer resistance (R_ct) and double layer capacitance (C_dl) in the absence and presence of inhibitors are determined. The PMG and VPA inhibitors were capable of inhibiting the corrosion process up to ≈91% and ≈85%, respectively. In the presence of PMG, the synergic effect of chlorine ions was observed. Density functional theory (DFT) was engaged to establish the adsorption site of PMG, VPA, and their deprotonated states. For studied compounds, the resulted values of E_LUMO, E_HOMO, energy gap (∆E), dipole moment (μ), electronic hardness (η), global softness (σ), electrophilic index (ω), and the electronic potential map are in concordance with the experimental data results regarding their corrosion inhibition behavior and adsorption on the metal surface.     

Corrosion inhibition investigations of 3-acetylpyridine semicarbazone on carbon steel in hydrochloric acid medium

The corrosion inhibition efficiency of 3-acetylpyridine-semicarbazide (3APSC) on carbon steel (CS) in 1.0 M HCl solution has been investigated using weight loss measurements, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization studies. The results show that inhibition efficiency on metal increases with the inhibitor concentration. 3APSC exhibited marked inhibition towards carbon steel in HCl medium even at low concentrations. The adsorption of inhibitor on the surfaces of the corroding metal obeys the Langmiur isotherm and thermodynamic parameters (K _ads, ?G _ads ⁰ ) were calculated. Activation parameters of the corrosion process (E _a, ?H* and ?S*) were also calculated from the corrosion rates. Polarization studies revealed that 3APSC act as a mixed-type inhibitor. Surface analysis of the metal specimens was performed by scanning electron microscopy.     

Corrosion inhibition of mild steel by Laurus nobilis leaves extract as green inhibitor

The efficiency of Laurus nobilis leaves?? extract as a corrosion inhibitor for mild steel in acidic medium (1?M H₂SO₄) was investigated by use of the electrochemical techniques potentiodynamic polarization, electrochemical impedance spectroscopy, and polarization resistance measurements. According to the experimental results, L. nobilis extract acts as a good corrosion inhibitor. In the presence of the inhibitor, corrosion potential shifted toward a more negative value than for the blank solution. Inhibitor efficiency increased with increasing inhibitor concentration, as expected. According to the potentiodynamic polarization results the corrosion of mild steel increased with increasing temperature both in the presence and absence of the inhibitor. The activation energy (E _a) of the corrosion process was calculated from the variation of corrosion current density with temperature.     

Monte Carlo simulation and electrochemical performance corrosion inhibition whid benzimidazole derivative for XC48 steel in 0.5 M H2SO4 and 1.0 M HCl solutions

The inhibition of 1-(4-methoxybenzyl)-2-(4-methoxyphenyl)-1H-benzimidazole (MMB) on corrosion of XC48 steel in solutions 1.0 M HCl and 0.5 M H₂SO₄ were studied by potentiodynamic polarization and electrochemical impedance spectroscopy techniques (EIS). Potentiodynmic polarization curves revealed that MMB acts as a mixed-type inhibitor in both acidic media. The impedance results indicated that the corrosion process occurs under activation control. Furthermore, MMB shows a higher inhibition efficiency in HCl (97%) than in H₂SO₄ (92%) at 10^?4 M MMB. The values of ΔG°_ads, ΔH_a, E_a and ΔS_a in temperature range 293–323 K indicated that MMB strongly retarded the corrosion of XC48 steel in both solutions by a chemisorptions process. The adsorption of Benzimidazole (MMB) on carbon steel surface followed Langmuir adsorption isotherm. Scanning electron microscopy (SEM) analysis confirmed that there is an adsorbed film on the surface of XC48 steel. The results of Monte Carlo simulations studies confirmed the inhibition action of MMB.     

Indole‐3‐acetic acid and N‐acetyltryptophan corrosion inhibition effects on mild steel in 1 M hydrochloric acid solution

Corrosion inhibition of indole‐3‐acetic acid and N‐acetyl tryptophan on carbon steel was investigated using polarization and electrochemical impedance spectroscopy (EIS). Polarization results revealed that corrosion inhibitors could reduce the rate of cathodic and anodic reactions on metal surface. EIS analysis showed inhibition efficiency of indoles increases by increasing the inhibitor concentration. The maximum inhibition efficiency was 97% and 80% in solutions containing 10 mM indole‐3‐acetic acid and 10 mM N‐acetyl tryptophan, respectively. The adsorption of inhibitors was found to follow Langmuir isotherm. Adsorption and film formation of inhibitors on the metal substrate were confirmed by calculating thermodynamic adsorption parameter (ΔG⁰_ads) and characterization of exposed metals' surface through contact angle measurements. Copyright © 2014 John Wiley & Sons, Ltd.     

Adsorption Behavior and Inhibition Corrosion Effect of Sodium Carboxymethyl Cellulose on Mild Steel in Acidic Medium

The effect of sodium carboxymethyl cellulose (Na-CMC) on the corrosion behavior of mild steel in 1.0 mol·L⁻¹ HCl solution has been investigated by using weight loss (WL) measurement, potentiodynamic polarization, linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS) methods. These results showed that the inhibition efficiency of Na-CMC increased with increasing the inhibitor concentration. Potentiodynamic polarization studies revealed that the Na-CMC was a mixed type inhibitor in 1.0 mol·L⁻¹ HCl. The adsorption of the inhibitor on mild steel surface has been found to obey the Langmuir isotherm. The effect of temperature on the corrosion behavior of mild steel in 1.0 mol·L⁻¹ HCl with addition of 0.04% of Na-CMC has been studied in the temperature range of 298–328 K. The associated apparent activation energy (E^*_a) of corrosion reaction has been determined. Scanning electron microscopy (SEM) has been applied to investigate the surface morphology of mild steel in the absence and presence of the inhibitor molecules.     

饱和NaCl溶液浸泡下混凝土试块中有机阻锈剂对钢筋腐蚀行为的影响

利用电化学阻抗谱(EIS)、半电池腐蚀电位(Ecorr)和宏观电池腐蚀电流密度(Icorr)测量技术,在饱和NaCl溶液浸泡的硬化混凝土试块中,研究了4种醇胺基阻锈剂对钢筋电极腐蚀电化学行为的影响和长期阻锈性能.在浸泡初始的100d内,与空白样相比,添加阻锈剂后钢筋电极腐蚀电位升高,阻抗膜值增大,腐蚀电流密度值降低,表明电极表面处于钝态,阻锈剂表现出良好的阻锈性能.随浸泡时间延长,电极腐蚀电位和阻抗膜值下降,腐蚀电流密度增大.浸泡后期,除添加醇胺基CI-4样外,电极电位和腐蚀电流密度与空白样相比无明显差别,表明电极由钝态转变为活性腐蚀状态.但添加CI-4样品,钢筋电极始终保持在钝化状态,阻锈性能最好.基于阻锈剂与Cl-间的竞争吸附,分析探讨了可能的阻锈机理.     

Inhibition of acid corrosion of mild steel by Anacyclus pyrethrum L. extracts

Inhibition of the corrosion of mild steel in sulfuric acid by extracts of Anacyclus pyrethrum L. (leaves and stems, AP-LS; flowers AP-F; roots, AP-R) has been studied by use of electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization. Anacyclus pyrethrum L. inhibited the corrosion of mild steel in 0.5 M H₂SO₄ solution. Polarization curves show that the different parts of plants act as anodic type inhibitors. Changes in impedance data (charge transfer resistance, R _t, and double layer capacitance, C _dl) were indicative of adsorption of the extracts on the metal surface, leading to the formation of protective films. The extent of surface coverage by the inhibitors was determined by measurement of ac impedance; it was found that adsorption of these inhibitors on the mild steel surface obeys the Langmuir adsorption isotherm. Activation energies in the presence and absence of AP-LS and AP-F were obtained by measuring the temperature dependence of the corrosion current.     

Medicago sativa as a green corrosion inhibitor for 1018 carbon steel in 0.5 M H2SO4 solution

A study on the use of the methanol extract of Medicago sativa as a green corrosion inhibitor for 1018 carbon steel in 0.5?M of sulfuric acid has been carried out by using potentiodynamic polarization curves, electrochemical impedance spectroscopy and gravimetric tests. Testing temperatures were 25°C, 40°C and 60°C. Results showed that M. sativa is a good corrosion inhibitor, with its efficiency increasing with its concentration and with time, but decreasing with the temperature. M. sativa forms a passive film on top of the steel with a passive current density and pitting potential values lower than that for uninhibited solution, and remained on the steel for 8–12?h. This film formed by iron ions and heteroatoms present in OH^? and amine groups from the extract are adsorbed on the steel and form a protective film on to the steel.     

Corrosion mechanism of pure aluminium in aqueous alkaline solution

The corrosion of pure aluminium in alkaline solution has been explored using an open circuit potential transient, potentiodynamic polarization experiment and a.c. impedance spectroscopy. The steady-state value of the open circuit potential (E _ocp ^ss ) of pure aluminium in alkaline solution was observed to decrease with increasing rotation rate of the specimen, which is ascribed to the enhanced anodic reaction. The extent of anodic polarization for the aluminium dissolution reaction on pure aluminium at E _ocp ^ss was found to be greater than that of cathodic polarization for the water reduction reaction. This indicates that the rate of corrosion of pure aluminium is mainly determined by the anodic reaction in alkaline solution. Based upon the experimental results, a corrosion mechanism for pure aluminium has been proposed in the presence of the native surface oxide film in alkaline solution, involving consecutive oxide film formation and dissolution, and simultaneous water reduction.     

Adsorption and inhibitive properties of aminobiphenyl and its Schiff base on mild steel corrosion in 0.5 M HCl medium

Electrochemical measurements were performed to investigate the effectiveness and adsorption behaviour of aminobiphenyl (Aph) and 2-(3-hydroxybenzylideneamino)biphenyl (Aph-S), as corrosion inhibitors for mild steel (MS) in 0.5 M HCl solution. Potentiodynamic polarization, linear polarization resistance (LP) and electrochemical impedance spectroscopy (EIS) techniques were applied to study the metal corrosion behaviour in the absence and presence of different concentrations of Aph and Aph-S. In order to gain more information about adsorption mechanism the AC impedance technique was used to evaluate the potential of zero charge (PZC) from polarization resistance (R_p) versus voltage (E) plot. Potentiodynamic polarization measurements showed that Aph act as cathodic type inhibitor where as Aph-S act mixed type. The inhibition efficiency (IE%) increases with increasing concentration of compounds and reached 92.6% for Aph and 97.2% for Aph-S at 5 × 10⁻³ M. Double layer capacitance (C_dl) and polarization resistance (R_p) values are derived from Nyquist plots obtained from AC impedance studies. The experimental data fit Langmuir isotherm for both Aph and Aph-S, and from the adsorption isotherm some thermodynamic data for the adsorption processes are calculated and discussed. The effect of exposure time on the corrosion behaviour of mild steel in the absence and presence of inhibitor over 168 h was also studied.     

A study of synthesized Mannich base inhibition on mild steel corrosion in acid medium

1((Cyclohexylamino)methyl)urea Mannich base was synthesized and characterized using FT-IR, H¹NMR and C¹³NMR spectra and it was tested as a corrosion inhibitor for mild steel in 1?N HCl and 1?N H₂SO₄ solutions using potentiodynamic polarization and AC impedance techniques over the temperature range of 303?C333?K. The inhibition efficiency was increased with respect to concentration of inhibitor and temperature in 1?N HCl, whereas the inhibition efficiency was increased with respect to concentration of inhibitor and decreased with respect to temperature in 1?N H₂SO₄. Potentiodynamic polarization results revealed that the inhibitor acts as mixed type inhibitor. AC impedance study indicates that the corrosion of steel was mainly controlled by a charge transfer process. Surface analysis was carried out using SEM technique. The adsorption of inhibitor follows Langmuir adsorption isotherm. Activation and adsorption parameters were calculated to gain information about the inhibitive action mechanism.     

Extracts of Punica granatum Linne husk as green and eco-friendly corrosion inhibitors for mild steel in oil fields

Extracts of pomegranate have been investigated, by use of weight loss and potentiodynamic polarization techniques, as green and eco-friendly inhibitors of corrosion of Q235A steel in 1 M hydrochloric acid solution at 60 °C. The efficiency of inhibition by the extracts varied with extract concentration from 10 to 1,000 mg/L; the highest efficiency was 95.0 %. The extracts inhibit corrosion mainly by an adsorption mechanism. In addition, the hydroxyl and ether groups of polyphenols can capture the H⁺ to reduce the corrosion, and the polyphenols can eliminate dissolved O₂ to inhibit oxygen-adsorption corrosion. Potentiodynamic polarization studies show that extracts are mixed-type inhibitors.