Novel multifunctional water- and oil-repellent,antibacterial, and flame-retardant cellulose fibres created by the sol–gel process

This research aimed to prepare cotton fibres with novel multifunctional water- and oil-repellent, antibacterial, and flame-retardant properties. A three-component equimolar sol mixture, which included 1H,1H,2H,2H-perfluorooctyltriethoxysilane, 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride, and P,P-diphenyl-N-(3-(trimethoxysilyl)propyl) phosphinic amide, was applied to the cotton fabric using the sol–gel process. The presence of the coating on the cotton fibres was confirmed by Fourier transform-infrared spectroscopy and X-ray photoelectron spectroscopy. The functional properties of the coated cotton fabric were determined from liquid contact angle measurements and antibacterial activity, burning behaviour, and thermo-oxidative stability studies. The results demonstrate that a unique, compatible, and uniform organic-inorganic hybrid polymer network was formed on the fabric surface, which preserved its simultaneous hydrophobic (water contact angle of 135 ± 2°), oleophobic (n-hexadecane contact angle of 117 ± 1°), and bactericidal (bacterial reduction of 100 %) properties and incorporated the enhanced thermo-oxidative stability of the modified cellulose fibres.     

Facile fabrication of hydrophobic octadecylamine-functionalized polyurethane foam for oil spill cleanup

To improve the hydrophobic property of polyurethane foam for oil spill cleanup, the polyurethane foam with nitrile groups is modified by grafting with oleophilic octadecylamine. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and optical contact angle measuring device are used to characterize the modified polyurethane foam. The results show that the octadecylamine has been successfully grafted onto the polyurethane foam and improved the foam hydrophobicity. The modified foam exhibits higher contact angle (146.3 ± 2.8°) compared to the unmodified foam (121.4 ± 3.2°). Moreover, the water sorption of the modified foam is 0.11g/g, which is much lower than that of the unmodified foam (0.84g/g). On the other hand, the sorption capacity of the modified foam for toluene, gasoline and diesel sorption is increased by 20?40%. Therefore, the polyurethane foam prepared by us can be effectively used in oil/solvent spill cleanup.     

Design and fabrication of thin polymer coating on cotton fabric surface to impart hydrophobicity: An admicellar polymerization approach

The fluorinated poly(trifluoroethylmethacrylate) thin polymers were successfully prepared through free radical initiating admicellar polymerization approach using fluorosurfactant and 2,2,2-trifluoroethylmethacrylate (TFEM, monomer) system, which was initiated with potassium persulfate (KPS) initiator. The structure of the resultant polymer and morphology of the modified cotton fabric surfaces were confirmed by SEM and EDX analysis. The surface wettability of the modified cotton fabric was characterized by a water drop stay time and contact angle (CA) measurement. The coated cotton fabric exhibited excellent hydrophobicity with a water contact angle of 137.79°.     

Effects of plasma treatments for improving extreme wettability behavior of cotton fabrics

A simple, environmentally benign and energy efficient process for fabricating single faced superhydrophilic/hydrophobic cotton fabrics by controlling surface texture and chemistry at the nano/microscale is reported here. Stable ultra-hydrophobic surfaces with advancing and receding water droplet contact angles in excess of 146° as well as extreme superhydrophilic surfaces are obtained. Hydrophobic water-repellent cotton fabrics were obtained following plasma treatment through diamond-like carbon (DLC) coating by plasma enhanced chemical vapour deposition. The influence of changing different precursor’s plasma pre-treatments such as H₂, Ar or O₂ on the properties of DLC coatings is also evaluated using atomic force microscopy, X-ray photoelectron spectroscopy, attenuated total reflection Fourier transform infrared spectroscopy, and analysed in terms of contact angle measurements. Because of the DLC coating, the coated fabric showed to endure its superhydrophobic character even after 12 months.     

Hierarchical structure microspheres of PCL block copolymers via electrospraying as coatings for fabric with mechanical durability and self‐cleaning ability

The various morphology and structure microspheres were fabricated via one‐step single‐solvent electrospraying of hydrophilic and hydrophobic block modified copolymer of polycaprolactone (PCL). A honeycomb‐like hierarchical structure microspheres of PCL‐b‐PTFOA(4h) and abundant nanometer pores of PCL‐b‐PEG400 microspheres were obtained due to the solvent evaporation, thermally and polymer diffusion‐induced phase separation effect. Furthermore, a superhydrophobic coatings and robust superhydrophobic‐coated cotton woven fabric surfaces were prepared by using PCL‐b‐PTFOA(4h) microspheres with hierarchical structure and low surface energy. The contact angle (CA) and sliding angle (SA) of PCL‐b‐PTFOA(4h) microspheres‐coated cotton woven fabric surfaces reached 164.4 ± 5.5° and 6.8 ± 0.5°, respectively, which allows for self‐cleaning. The self‐cleaning test demonstrated that the coated superhydrophobic surface could shed aqueous dyes and dust without any trace. The superhydrophobic‐coated fabric shows good soaping fastness against mechanical abrasion without significant reduction of CA. This electrospraying coating of block copolymers can provide a simple, facile, and promising technique for producing multifunctional textiles.     

聚酯织物表面耐用超疏水涂层的制备及在油水分离中的应用

使用在含有甲基MQ(M:单官能团Si-O单元R₃SiO_1/2, Q:四官能团Si-O单元SiO₂)硅树脂与疏水SiO₂的二甲苯溶液中浸渍的方法,在聚酯织物表面制备了耐用超疏水涂层。经过处理后,微米级聚酯纤维表面被紧密的疏水纳米颗粒包裹,通过这种方法降低了纤维的表面能。聚酯织物展现出良好的超疏水特性,与水滴的静态接触角为156°,滚动角为5°。得到的超疏水聚酯织物在机械磨损、酸碱环境及紫外线照射条件下,表现出了良好的稳定性。此外,用超疏水聚酯织物作为过滤材料得到的油水分离效率达99%以上。该方法为大面积工业制备超疏水织物提供了新的思路。     

Hydrophobicity modification of woven cotton fabric by hydrophobic fumed silica coating

Water repellency of woven cotton fabric was achieved by coating with the aqueous dispersion containing organosilane agent (HDTMS) and fumed silica. The coating agents were applied using padding method and then followed by batching the coated fabric at the ambient temperature for 24 h to allow the condensation reaction between HDTMS silanol group and fumed silica silanol group, rendering silica particles hydrophobic. An ultrasonicator was employed to prepare the homogenous coating dispersion. The water repellency evaluated by water contact angle determination which showed the contact angle over 110° was obtained with low amount of applied HDTMS of 1 wt%. The effect of fumed silica addition on an increase in fiber surface roughness geometry showed the influential result in improving the water contact angle. From durability to washing test, the hydrophobic coatings evidenced from SEM and ATR/FTIR remained adhering to fiber surface, indicating the durability. After washing, the coating on the fabric with fumed silica addition appeared to be scatter particles which made a contribution to the higher contact angle value when compared to sheet-like layer coating in case of HDTMS coating alone.     

Fabrication of durable superhydrophobic nanofibrous filters for oil‐water separation using three novel modified nanoparticles (ZnO‐NSPO,AlOO‐NSPO,and TiO2‐NSPO)

Three reusable and durable superhydrophobic nanofibrous filters were prepared by dip coating the nanofibrous fabric in the three different dispersed solutions of the newly modified nanoparticles (ZnO‐NSPO, AlOO‐NSPO, and titanium dioxide [TiO₂]‐NSPO). The contact angle results proved that the TiO₂‐NSPO coated nanofibrous polyacrylonitrile (PAN) filter was hydrophobic with the water contact angle (WCA) of 141° while the ZnO‐NSPO and AlOO‐NSPO coated nanofibrous PAN filters were superhydrophobic with the WCA of 168° and 152°, respectively. The as‐prepared filters can be utilized as an effective martial for oil‐water separation with separation efficiency of over 98%.     

In-situ growth of silica nanoparticles on cellulose and application of hierarchical structure in biomimetic hydrophobicity

Monodispersed silica nanoparticles were prepared by a simple two-step method with hydrolysis and condensation. The materials were characterized by dynamic light scattering (DLS), SEM and TEM. Through in-situ growth of silica nanoparticles on cotton fabrics, a dual-scaled surface with nanoscaled roughness of silica and microscaled roughness of cellulose fiber was generated. After the modification of the low surface energy, the wettability of smooth silicon slide, silicon slide with nanoscaled roughness of silica particles, cotton fabric, and cotton fabric with silica particles was evaluated by the tests of the contact angle (CA) and the advancing and receding contact angle (ARCA). The cotton fabric with dual-scaled roughness exhibits a static CA of 149.8° for 4 μL water droplet and a hysteresis contact angle (HCA) of 1.8°. The results of CA and HCA show that microscaled roughness plays a more important role than nanoscaled roughness for the value of CA and HCA. The results in the hydrostatic pressure test and the rain test show the important contribution of nanoscaled roughness for hydrophobicity.     

Asymmetrically superhydrophobic cotton fabrics fabricated by mist polymerization of lauryl methacrylate

A graft-polymerization process with atomized lauryl methacrylate as monomer is used to fabricate fluorine-less and asymmetrically superhydrophobic cotton fabrics. The polymers synthesized in the process can form nanoscale hierarchical structures on the cotton surface, and the surface morphology can be controlled by choosing a suitable solvent or by varying the feeding quantity of the monomer mist stream. After applying the surface modification to cotton fabrics, an asymmetrically superhydrophobic surface is achieved without any additional nanosized particles, and the solvent damages on the cotton fabrics are controllable at a very low level. Surface characterization reveals that the modified side of the cotton fabric has laundering-durable and mechanically stable superhydrophobicity with a water contact angle of more than 150°, whereas the opposite inherits the hydrophilic property of pristine cotton fabric. The modified cotton fabrics are found to have medium-level water-absorbing ability between pristine cotton and PET fabrics, as well as good vapor transmissibility similar to pristine cotton fabric. These properties are of great significance in textile and medical applications.     

Tailoring of multifunctional cellulose fibres with “lotus effect” and flame retardant properties

This research aimed to create multifunctional cellulose fibres with water- and oil-repellent, self-cleaning, and flame retardant properties. A sol mixture of fluoroalkyl-functional siloxane, organophosphonate and methylol melamine resin was applied to cotton fabric by the pad-dry-cure method. Successful coating was verified by atomic force microscopy and Fourier transform infrared spectroscopy. The functional properties of the coated fibres were investigated using the static contact angles of water and n-hexadecane, the water sliding angles, the vertical test of flammability, the limiting oxygen index, and simultaneous thermal analysis. The results reveal that a homogeneous composite inorganic–organic polymer film formed on the cotton fabric surface exhibited the following properties: static contact angle of water of 150° and of n-hexadecane of 128°, water sliding angle of 10°, limiting oxygen index of 34 %, and high thermal stability. These results demonstrate the synergistic activity of the compounds in the coating, which resulted in the creation of a “lotus effect” on the fabric surface as well as excellent flame retardancy and thermal stability.     

Preparation of superhydrophobic electroconductive graphene-coated cotton cellulose

A simple and versatile method based on cotton cellulose coated with graphene is reported for the fabrication of superhydrophobic and electroconductive textiles. Graphene oxide was deposited on cotton fibers by a dip-pad-dry method followed by reduction with ascorbic acid to yield a fabric with a layer of graphene. The fabric was then reacted with methyltrichlorosilane to form polymethylsiloxane (PMS) nanofilaments on the fibers surface. The surface chemistry and morphology were characterized by UV–visible reflectance spectrophotometry, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy and scanning electron microscopy. The water contact angle (CA)/shedding angle (SHA) and resistivity measurements were used for assessing hydrophobicity and conductivity, respectively. The graphene-coated fabric showed hydrophobicity with the CA of 143.2° ± 2.9° and SHA of 41°. The formation of PMS nanofilaments displayed superhydrophobicity with CA of 163° ± 3.4° and SHA of 7°, which indicated the self-cleaning ability. Conductivity of the graphene-coated fabric was confirmed by the electrical resistivity of 91.8 kΩ/sq which increased to 112.5 kΩ/sq after the formation of PMS nanofilaments.     

含氟环氧树脂杂化纳米二氧化硅超疏水材料的制备与性能

目前超疏水材料的制备方法大都存在着制备工艺复杂的缺点。 本文采用传统自由基聚合方法,以甲基丙烯酸缩水甘油酯(GMA)和苯乙烯(St)为单体,合成具有交联性的前驱聚合物P(GMA-r-St)。 再用三氟乙酸(TFA)对其进行接枝改性,制备含氟环氧聚合物P(GMA-r-St)-g-TFA。 利用γ-氨丙基三乙氧基硅烷(KH-550)改性纳米二氧化硅(SiO₂),对其进行傅里叶变换红外光谱(FTIR)、热重(TG)表征。 氨基改性的纳米二氧化硅与含氟环氧聚合物混合制备的超疏水改性材料,棉织物表面经其浸泡,可快速构建超疏水结构。 通过改变改性纳米颗粒的含量,探究其构筑的棉织物的疏水性能和耐溶剂性能。 研究结果表明,经浸泡改性的棉织物,水接触角为160°,耐溶剂性时间为130 min,具备很好的耐溶剂性。 该方法可广泛应用于多种基底材料表面的疏水改性。     

Cotton fabric modification for imparting high water and oil repellency using perfluoroalkyl phosphate acrylate via γ-ray-induced grafting

The perfluoroalkyl phosphate acrylates were grafted onto a cotton fabric via γ-ray irradiation to improve the hydrophobic and oleophobic properties. The change in chemical structure of grafted cotton fabric was detected by the Fourier transform infrared spectroscopy and the X-ray photoelectron spectroscopy. The contact angles for water and sunflower oil were determined to be over 150° and 140°, respectively, after irradiated with a dose range of 471–5664 Gy. The flame retardancy of the fabric with a grafting ratio of over 13.0 wt% was improved, reaching to 24 compared with 18 of which before grafted, according to the limiting oxygen index measurement. The microstructure of the fabric before and after grafted was observed by the scanning electron microscope.     

Hydrophobic thin fluoropolymer coating on cotton surfaces

We report a simple novel procedure to prepare hydrophobic cotton textiles by admicellar polymerization. By in situ introducing fluoropolymer on cotton fibers to generate a dual-size surface roughness, followed by hydrophobization with a little amount of fluoromonomer Octafluoropentamethyl methacrylate (OFPM) with short time, normally hydrophilic cotton has been easily turned into hydrophobic. Hydrophobic cotton textile exhibits a static water contact angle of 124° for a 10?µl droplet. When an octa fluoroalkyl chain is introduced to the cotton surface, the originally smooth surface changed immediately to rough surface which is the key factor for hydrophobicity like lotus leaves.     

Surface hydrophobization of cotton via laccase-mediated polydopamine deposition and dodecyl gallate grafting

Natural fibers containing components with phenolic hydroxyl groups, such as jute, wool, and silk, can be directly modified by laccase-catalyzed grafting. However, cellulosic fibers like cotton cannot be functionalized in this manner. In this work, we developed a facile two-step method to graft polymers on cotton fabric via laccase catalysis. First, polydopamine (PDA) coating was deposited on the surface of the cotton fabrics via catalysis of laccase/2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) system. Then, the newly formed PDA coating acted as the secondary reaction platform for subsequent laccase-mediated grafting of hydrophobic monomer dodecyl gallate (DG). The oxidation of dopamine (DA) catalyzed with the laccase/TEMPO system was investigated using UV–visible (UV–vis) spectroscopy. The scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) results verified that the PDA was coated on the surface of cotton fibers. Fourier transform infrared (FTIR) spectra indicated that the PDA-coated cotton was successfully grafted with DG (DG-PDA-cotton). According to the weighting method, the grafting percentage was about 1.06%. The hydrophobicity of the DG-PDA-cotton fabrics was greatly improved with a contact angle of 133°. Also, the grafted cotton fabrics show repellency of water-soluble stains like coffee, milk, and tea. This study provides a new strategy for surface modification of cotton by laccase-mediated grafting, which offers the references for the green fabrication of cotton fabrics with improved functionalization.     

碳氟基团修饰的疏水微孔二氧化硅膜制备与表征

采用三氟丙基三乙氧基硅烷（TFPTES）和正硅酸乙酯（TEOS）作为前驱体,通过溶胶-凝胶法制备了三氟丙基修饰的SiO2膜材料。利用扫描电镜、N2 吸附、 红外光谱仪以及视频光学接触角测量仪对膜的断面形貌、孔结构以及疏水性能进行了表征。结果表明,随着三氟丙基三乙氧基硅烷加入量的增大,膜的疏水性逐渐增强,膜的孔结构基本保持不变。当TFPTES/TEOS的摩尔比例达到0.6时,膜对水的接触角达到 111.6°±0.5º,膜材料仍保持良好的微孔结构,其孔体积为0.19cm3•g-1,孔径为0.97nm。     

Polyhedral oligomeric silsesquioxane‐based fluoroether‐containing terpolymers: Synthesis,characterization and their water and oil repellency evaluation for cotton fabric

A series of polyhedral oligomeric silsesquioxane (POSS) based hybrid copolymers poly(POSS‐co‐methyl methacrylate ?co‐ 4‐vinylbenzyl fluoroether carboxylate) ( P(POSS‐MMA‐VBFC) ) were prepared via radical polymerization and characterized by nuclear magnetic resonance, fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, gel permeation chromatography, X‐ray powder diffraction, scanning electron microscopy and transmission electron microscopy. The thermal properties of these polymers (T_d > 250 °C) were improved by the introduction of POSS cage. The cotton fabrics coated with the polymers possessed excellent water and oil repellency. The water and salad oil contact angle could be achieved from 133° to 159° and from 127° to 141° respectively as the content of POSS in the polymer increased from 0 to 7.1 wt %. Moreover, the cotton fabric coated with the terpolymer was less flammable than the uncoated one. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The surface modification of cellulose fibres to create super-hydrophobic, oleophobic and self-cleaning properties

The surface modification of cellulose fibres was performed with the use of low-pressure water vapour plasma, followed by the application of a pad-dry-cure sol–gel coating with the water- and oil-repellent organic–inorganic hybrid precursor fluoroalkyl-functional siloxane (FAS), with the aim of creating the “lotus effect” on the cotton fabric surface. The tailored “lotus effect” was confirmed by measurements of the contact angle of water (154°) and n-hexadecane (140°), as well as by measurements of the water sliding angle (7°), which were used to identify the super-hydrophobic, oleophobic and self-cleaning properties of the modified fibres. The chemical and morphological changes caused by modifications of the fibres were investigated by XPS, FTIR, AFM and SEM. The results show that the plasma pre-treatment simultaneously increased the surface polarity, average roughness, and surface area of the fabric. The application of the FAS coating after plasma pre-treatment caused only a slight increase in the surface roughness, accompanied by a decrease in the surface area, indicating that the architecture of the surface was significantly changed. This result suggests that the surface pattern affected the “lotus effect” more than the average surface roughness. The plasma pre-treatment increased the effective concentration of the FAS network on the fabric, which resulted in enhanced repellency before and after repetitive washing, compared with that of the FAS-coated fabric sample without the plasma pre-treatment. Despite the fact that the plasma pre-treatment increased the concentration of the oxygen-containing functional groups on the fabric surface, this phenomenon insignificantly contributed to the adhesion ability and, consequently, the washing fastness of the FAS coating.     

Surface modification of cellulose with plant triglycerides for hydrophobicity

Hydrophobic cotton was achieved by surface modification of the cellulose with triglycerides from several plant oils including soybean, rapeseed, olive and coconut oils. These oils were delivered to the cellulose substrates in homogeneous solutions of ethanol or acetone as well as aqueous emulsions. Surface modification was facilitated by solvent evaporation followed by heating between 110 and 120 °C for 60 min. All oils, except for coconut, produced hydrophobic and less water-absorbing cotton, supporting the desirable role of higher unsaturation in the fatty acids to achieve crosslinked network. The most hydrophobic surfaces were obtained by the reaction with 1% soybean oil in acetone. On both bleached and scoured cotton, a water contact angle of 80° and water absorption value of 0.82 μL/mg were achieved. The acquired hydrophobicity was not only retained after water washing but also improved with subsequent exposures to elevated temperatures. The surface tension of scoured cotton cellulose was lowered from 63.81 mJ/m² to 25.74 mJ/m² when modified by soybean oil delivered in acetone, which is lower than that of poly(ethylene terephthalate). An aqueous emulsion of soybean oil also rendered the scoured cotton hydrophobic, which shows promise for a green chemistry and bio-based approach to achieve water repellency on cellulosic materials.