人类谷胱甘肽S-转移酶M1a-1a催化的亲核芳香取代反应的理论研究

利用分子力学和量子力学方法研究人类谷胱甘肽S-转移酶M1a-1a催化谷胱甘肽对1-氯-2,4二硝基苯(CDNB)的亲核芳香取代反应的细节.所获得的反应路径显示反应仅经历一个过渡态且能垒很低.电荷布居分析证明电子从谷胱甘肽基团流向二硝基苯,验证了反应的发生.计算结果表明活性位点3个残基(Tyr6,His107和Tyr115)参与了催化反应,尤其是His107,它在反应后期通过与产物形成氢键从而加速了Cl的释放.结果支持了Patskovsky等人提出的机理,并有助于其他谷胱甘肽S-转移酶的研究.     

Acid-catalyzed nucleophilic aromatic substitution: experimental and theoretical exploration of a multistep mechanism

The mechanism for the acid-mediated substitution of a phenolic hydroxyl group with a sulfur nucleophile has been investigated by a combination of experimental and theoretical methods. We conclude that the mechanism is distinctively different in nonpolar solvents (i.e., toluene) compared with polar solvents. The cationic mechanism, proposed for the reaction in polar solvents, is not feasible and the reaction instead proceeds through a multistep mechanism in which the acid (pTsOH) mediates the proton shuffling. From DFT calculations, we found a rate-determining transition state with protonation of the hydroxyl group to generate free water and a tight ion pair between a cationic protonated naphthalene species and a tosylate anion. Kinetic experiments support this mechanism and show that, at moderate concentrations, the reaction is first order with respect to 2-naphthol, n-propanethiol, and p-toluenesulfonic acid (pTsOH). Experimentally determined activation parameters are similar to the calculated values (Delta H exp not equal =105+/-9, Delta H calcd not equal =118 kJ mol(-1); Delta G exp not equal =112+/-18, Delta G calcd not equal =142 kJ mol(-1)).     

Synthesis of triarylamine‐containing poly(arylene ether)s by nucleophilic aromatic substitution reaction

We report synthesis of a series of new triarylamine‐containing AB‐type monomers and their polymers via nucleophilic aromatic substitution (S_NAr) reaction. Monomers consisting of a hydroxyl group at the para position of the nitrogen group in one phenyl ring and a fluorine leaving group at the para position in another phenyl ring were synthesized via palladium‐catalyzed amination reaction. The fluorine leaving group was activated by trifluoromethyl group at the ortho position and an electron‐withdrawing group (EWG) introduced at the para position of the unsubstituted phenyl ring that enabled control over monomer reactivity. S_NAr reaction of the monomers successfully produced corresponding poly(arylene ether)s with pendant EWGs that exhibited good solubility and thermal stability. Optical and electrochemical properties of the polymers were also affected by incorporation of EWGs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2692‐2702     

The first nucleophilic aromatic substitution of suitably activated 2-methoxyfurans with Grignard reagents

The reaction of 2-methoxyfuroates 1 with Grignard reagents 2 leads to tertiary alcohols or S_NAr products depending on the position of the alkoxycarbonyl group. OMe-Displacement occurs only for 3-substituted derivatives. It takes place even for 3-acetyl-2-methoxyfuran while the presence of a further ester function at 4 position induces the formation of the sole 4-tertiary alcohol. The OMe-substitution has been verified for a wide range of furans and Grignard reagents and low yields have been found only in the reactions with the benzylic and allylic reagents which are delocalized anions. A mechanistic interpretation is given.     

Poly(arylene sulfide)s via nucleophilic aromatic substitution reactions of halogenated pyromellitic diimides

Nucleophilic aromatic substitution (SNAr) reactions are exploited to prepare poly(arylene sulfide)s (PAS's) via the reaction of bis-thiolates and dibrominated pyromellitic diimide (PMDI) derivatives. Small-molecule model studies reveal the reaction is well-defined and proceeds in quantitative yield in practical times at room temperature. Variation in comonomer feed ratios allowed some control over target polymer molecular weights in the step polymerization, but control was likely limited by the relatively poor polymer solubility in the dipolar aprotic solvents typically employed to promote SNAr reactions. One substitution pattern produces a steric “pocket” around the PMDI units, inducing a peculiar solubility trend in halogenated solvents; that is, greatly reduced solubility in CHCl₃ relative to CH₂Cl₂ and C₂H₂Cl₄. One example small-molecule readily dissolves in CHCl₃ at room temperature, then rapidly grows poorly soluble crystals revealed by single-crystal XRD to contain CHCl₃ molecules in the steric pockets. Finally, the recently demonstrated depolymerization of phthalonitrile-based PAS's via ipso substitution with monothiolates as chain scission agents yields quantitative molecular weight reduction to monomeric species from the polymers reported here.     

Reinvestigation of the noncatalyzed coupling of aryllithium with haloarene: a novel aromatic nucleophilic substitution pathway

Noncatalyzed coupling reactions of aryllithiums and haloarenes proceed not only through the well-known aryne route but also, in some cases, through a novel addition-elimination pathway. Indeed, ortho-chloro- and ortho-bromomethoxyarenes lead selectively to the corresponding ortho-biaryls through a chelation-driven aromatic nucleophilic substitution pathway. Contrary to common belief, such noncatalyzed coupling reactions often proceed with high regioselectivity and high yield. These results underline the potency of such simple reactions and open up a straightforward access to a wide range of biaryl structures; this also appears particularly useful for large-scale and biaryl building-block syntheses, as only cheap and readily available substrates are involved.     

Preparation of poly(ether ketone)s derived from 2,5‐furandicarboxylic acid via nucleophilic aromatic substitution polymerization

From the viewpoint of the suppression of the petroleum consumption, aromatic poly(ether ketone)s (PEKs) were prepared by the nucleophilic aromatic substitution polymerization of 2,5‐bis(4‐fluorobenzoyl)furan (BFBF) synthesized from biomass and aromatic bisphenols. The model reaction of BFBF and p‐methoxyphenol revealed that BFBF possessed enough reactivity for the nucleophilic aromatic substitution reactions. The polymerizations of BFBF and aromatic bisphenols afforded high molecular weight polymers with good yields in N‐methylpyrrolidone and diphenyl sulfone for several hours. The longer polymerization time brought about the formation of insoluble parts in any solvents and reduction of molecular weight. The obtained PEKs were thermoplastics and exhibited good thermal stability, mechanical properties, and chemical resistance comparable to common high‐performance polymers. The thermal properties were tunable with the structure of bisphenols. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3094–3101     

Evidences for the key role of hydrogen bonds in nucleophilic aromatic substitution reactions

The effect of hydrogen bonds on the fate of nucleophilic aromatic substitutions (S(N)Ar) has been studied in silico using a density functional theory approach in the condensed phase. The importance of these hydrogen bonds can explain the "built-in solvation" model of Bunnett concerning intermolecular processes between halogenonitrobenzenes and amines. It is also demonstrated that it can explain experimental results for a multicomponent reaction (the Ugi-Smiles coupling), involving an intramolecular S(N)Ar (the Smiles rearrangement) as the key step of the process. Modeling reveals that when an intramolecular hydrogen bond is present, it lowers the activation barrier of this step and enables the multicomponent reaction to proceed.     

New synthetic method of 1,2-diaryl-1,2-dicarba-closo-dodecaboranes employing aromatic nucleophilic substitution (SNAr) reaction

Aromatic nucleophilic substitution (S_NAr) reaction of 1-phenyl-o-carborane with 4-nitrofluorobenzene in the presence of NaH or KO^tBu proceeded smoothly to give 1-(4-nitrophenyl)-2-phenyl-o-carborane; similar reaction affords various 1,2-diaryl-o-carboranes, which are useful precursors for macromolecular construction and drug design.     

Synthesis of 2-(4-amino substituted benzylidene) indanone analogues from aromatic nucleophilic substitution (SNAr) reaction

A novel, efficient and convenient procedure has been developed for the synthesis of 2-(4-amino-substituted benzylidene)indanone derivatives. In the first step, the reaction of 4-fluorobenzaldehyde with 5, 6-dimethoxy-2, 3-dihydro-1H-inden-1-one in the presence of NaOH in EtOH was described. In the next step, a variety of aliphatic and aromatic amines were reacted with 2-(4-fluorobenzylidene)-5, 6-dimethoxy-2, 3-dihydro-1H-Inden-1-one via aromatic substitution (S_NAr) reaction to produce 2-(4-aminobenzylidene)-5, 6-dimethoxy-2, 3-dihydro-1H-Inden-1-one derivatives as a novel class of 1-indanones. These products have been successfully prepared in good to excellent yields. ^1?H and ^13?C NMR, FT-IR spectroscopy and CHN analysis supported the proposed structures of the products.     

Phthalide as an activating group for the synthesis of poly(aryl ether phthalide)s by nucleophilic aromatic substitution

The phthalide ring was examined as an activating group for nucleophilic aromatic substitution. The proposed mechanism by which activation occurs is through a ring opening of the phthalide ring to form a Meisenheimer‐like σ complex. 3,3‐Bis(4‐fluorophenyl)phthalide was synthesized and examined under different reaction conditions to determine its suitability for polymer formation. Semiempirical calculations at the PM3 level suggested that 3,3‐bis(4‐fluorophenyl)phthalide is only moderately activated, whereas ¹H, ¹³C, and ¹⁹F NMR spectroscopy suggested that the monomer was not sufficiently activated for nucleophilic aromatic substitution. However, low‐molecular‐weight polymers (number‐average molecular weight < 7000 g/mol) were produced from bisphenol A, hydroquinone, and phenolphthalein. The polymers were characterized by gel permeation chromatography, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, NMR spectroscopy, and differential scanning calorimetry. The polymers displayed relatively high glass‐transition temperatures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3046–3054, 2002     

Phase-transfer agents as catalysts for a nucleophilic substitution reaction in microemulsions

The reaction between 4-tert-butylbenzyl bromide and potassium iodide was carried out in microemulsions based on different nonionic surfactants, and the reaction rates were compared with those obtained in two-phase systems with added phase-transfer agent, either a quaternary ammonium salt or a crown ether. The reactions were relatively fast in the microemulsions and extremely sluggish in the two-phase systems without additional phase-transfer agent. Addition of a phase-transfer agent did not accelerate the reaction when a hydrocarbon was used as organic solvent, neither in the two-phase system nor in the microemulsion. When a chlorinated hydrocarbon was used as solvent, phase-transfer catalysis became effective and the rate obtained in the two-phase system with an equimolar amount of phase-transfer agent added was higher than that obtained in the microemulsion. When a catalytic amount of phase-transfer agent was used, the rate in the two-phase system was about the same as the rate obtained in the microemulsion without the phase-transfer agent. The combined approach, that is, use of a microemulsion as the reaction medium and addition of a phase-transfer agent, gave the highest reaction rate. The quaternary ammonium salt (tetrabutylammonium hydrogen sulfate) was a more efficient catalyst in the microemulsion system than the crown ether ([18]crown-6).     

Multicomponent reaction of amine,carbon disulfide,and fluoronitrobenzene via nucleophilic attack on the fluorinated carbon for the synthesis of nitrophenyl methylcarbamodithioates

In this paper, multicomponent reaction of amine, carbon disulfide and fluoronitrobenzene is reported for the synthesis of nitrophenyl methylcarbamodithioate derivatives. The method is based on the nucleophilic attack of the activated methylcarbamodithioate salt to fluoronitrobenzene. Several starting materials are tested and successfully produced the corresponding nitrophenyl methylcarbamodithioate. A possible mechanism for the reaction is suggested.     

PEG 400 promoted nucleophilic substitution reaction of halides into organic azides under mild conditions

Abstract

Polyethylene glycol 400 (PEG 400) has been demonstrated as an efficient and eco-friendly reaction medium for the preparation of organic azides from structurally diverse halides by nucleophilic substitution reaction with NaN₃ under mild conditions. The advantages of this protocol are: operational simplicity, environmental safety, broad substrate scope, excellent functional group tolerance, and short reaction time. The PEG 400 can be recovered and reused.     

Study on the synthesis of 6-alkylaminouridines via the nucleophilic aromatic substitution reaction of 6-cyanouridine derivatives

6-Cyanouracil derivatives underwent direct substitution reactions with selective primary amines in the presence of N,N-dimethylaminopyridine as a catalyst to give the corresponding 6-alkylaminouracils. This reaction provides a facile access to versatile 6-alkylaminouridine derivatives.