Tribological properties of nanoparticle-laden ultrathin films formed by covalent molecular assembly

The tribological properties of ultrathin films containing nanoparticles encapsulated in immobilized dendrimers are investigated. The films were formed by covalent molecular assembly in supercritical carbon dioxide, and the Au nanoparticles were formed in aqueous solution. End-capping of the terminal amine groups of the dendrimer by fluorinated species resulted in a reduction in the size of the nanoparticles formed. The resulting film structure displayed a lower coefficient of friction when the nanoparticles were formed after fluorination. The observed improvement in the tribological properties is attributed to the reduction in agglomeration of the nanoparticles due to the presence of the fluorine moieties.     

Covalent molecular assembly of multilayer dendrimer ultrathin films in supercritical medium

Ultrathin films containing dendrimers are fabricated on amine- and anhydride-derivatized silicon dioxide surface through alternate layer-by-layer (LbL) assembly of pyromellitic dianhydride (PMDA) and poly(amidoamine) (PAMAM) dendrimer in supercritical carbon dioxide (SCCO2) with interlayer linkage established by covalent bonds. X-ray photoelectron and UV-visible absorption spectroscopies, atomic force microscopy (AFM), and ellipsometry were employed to study the interfacial chemistry, growth, morphology, and thickness of the assembled film. XPS analysis suggests that the PMDA/PAMAM interlayer covalent bond is established to completion, and functional surfaces for immobilization of the next layer are available after deposition of each layer. UV-visible absorption and ellipsometry revealed layer-by-layer growth of the film. The functional property film as a porous matrix was manifested in the reduction of the refractive index upon introduction of the dendrimer.     

Covalent molecular assembly of oligoimide ultrathin films in supercritical and liquid solvent media

An ultrathin film of oligoimide has been fabricated on amine-modified substrates of silicon and quartz through alternate layer-by-layer (LBL) assembly of pyromellitic dianhydride (PMDA) and diaminodiphenyl ether (DDE), with interlayer links established by covalent bonds. The assembly was formed in supercritical carbon dioxide (SCCO2) and in solution (dimethyl acetamide, DMAc), and the imidization reaction was performed by thermal and chemical methods, in benzene and in the supercritical medium. X-ray photoelectron and UV-visible absorption spectroscopies, atomic force microscopy (AFM), and ellipsometry were employed to study the interfacial chemistry, growth, morphology, and thickness of the assembled film. XPS analysis confirmed the sequential deposition of PMDA and DDE through formation of amic acids. At each deposition step, surface functionalities for the assembly of the next layer were generated. The interfacial chemical reaction was almost complete in the SCF (supercritical fluid) medium, as compared to the conversions observed in conventional assembly. Both the PMDA and DDE molecules were assembled in an organized manner, resulting in uniform surface morphology. Uniform film growth was revealed from the increase of UV absorption intensity and film thickness. The overall growth and quality of the films in SCF medium were greater than that for films formed in DMAc. The results of this novel study show that an environmentally friendly solvent can be used to obtain mechanically robust and thermally stable ultrathin films with little loss of material during the imidization step. In contrast to conventional deposition of the molecular layers that utilizes liquid solvents, use of SCCO(2) avoids solvent effects and posttreatment for solvent removal, while ensuring facile transport during contact.     

Interface effects on moisture absorption in ultrathin polyimide films

Water absorption in thin films (<1000 Å) of a commercial polyimide was evaluated by monitoring dimensional changes induced by a humid environment. Film thickness was measured using x-ray reflectivity, which is a nondestructive technique offering angstrom resolution in the measurements of thin film or multilayer thickness. The effect of several variables on the absorption of moisture were monitored in polyimide films adhered to polished silicon substrates, including total dry film thickness, exposure time, and the contribution of a coupling agent. The percentage increase in film thickness due to moisture uptake is found to be a weak function of dry film thickness, decreasing as dry film thickness increases, and to be somewhat affected by the use of an interfacial coupling agent. The observed behavior points to the polymer/substrate interface as a strong factor controlling the absorption of moisture in the polyimide/silicon system, and is believed to reflect the presence of a highly moisture-saturated interfacial layer. A bilayer model is proposed, and the feasibility of using this model to describe the observed behavior is considered. Published 1998 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

J Polym Sci B: Polym Phys 36 : 155–162, 1998     

Preparation and adhesion of ultrathin polyimide films on polycrystalline silver

4.4-oxydianiline (ODA) and 1,2,3,5-benzenetetracarboxylic anhydride (PMDA) were deposited from the vapor phase onto a polycrystalline silver substrate and polymerization of the two components to form ultrathin polyimide films (d≈ 11 Å) was followed by X-ray photoelectron spectroscopy. Both PMDA and ODA chemisorb on the clean surface under partial fragmentation. Co-deposition of ODA and PMDA followed by heating of the substrate led to formation of thermally stable (T<450°C) polyimide films. Our data indicate that adhesion of the polyimide film to the surface involves chemical bonding to fragmented PMDA and/or ODA chemisorbed on the substrate. Our experiments show that polyimide films can be prepared sufficiently thin to allow the application of surface sensitive techniques to probe the substrate-polymer interface and to study the basic physics and chemistry of adhesion.     

Synthesis of ultrathin polymer films by self assembly

Recent progresses in the self assembly of ultrathin polymer films are described. Bilayer membranes of polymeric hydrogen-bond networks are formed in water. Two-dimensional networks of organic and inorganic polymers are formed in cast films of synthetic bilayer membranes to give stable multilayer films upon removal of the matrices. The monolayer at the air-water interface constitutes suitable templates for 2D polymer networks, and it may be either removed or part of the 2D film. Successive adsorption of polycations and polyanions under carefully controlled conditions produces layered polyion complexes in the stepwise manner. Various polymer chains are epitaxially adsorbed onto graphite. All these results indicate that molecularly defined 2D polymer structures are readily available.     

Spectroscopic and optical characterization of porphyrin chromophores incorporated into ultrathin polyimide films

Polyamic acid (PAA) containing free-base porphyrin and zinc(II) porphyrin chromophores was synthesized by copolymerization of diphenylether-type tetracarboxylic dianhydride and diamines. The monolayer of the alkylamine salts of PAA (PAASs) at the air/water interface was deposited on solid substrates by the Langmuir-Blodgett (LB) technique. The PAAS LB films thus obtained were converted to polyimide (PI) LB films by chemical treatment. The fluorescence of porphyrin moieties in the PI LB film was observed, because of the weak electron-accepting properties of the diphenylether unit. Therefore, the photophysically important processes, such as photoinduced electron transfer, excitation energy transfer, and excitation energy migration could be investigated in relation to the layered nanostructures of the ultrathin PI films. The fluorescence spectrum suggested that the aggregation of porphyrin moieties in the PI LB films was effectively prevented by the use of polymeric films. The surface plasmon (SP) measurement showed that the thickness of the monolayers was 0.9-1.0 nm for PAAS films and 0.32-0.40 nm on average for PI LB films. The absorption dichroism of the Soret band of porphyrin indicated that porphyrin moieties in the PAAS and PI LB films are oriented in parallel with the substrate. These results showed that the orientation and the spatial distribution of porphyrin units can be efficiently regulated in the PI LB films in a nanometer dimension.     

Layer-by-layer assembly for rapid fabrication of thick polymeric films

In the past two decades, layer-by-layer (LbL) assembly has been proven to be a convenient and versatile method to fabricate functional films. However, using traditional dipping LbL assembly to fabricate micrometer-thick films is time consuming. Compared with ultrathin films, micrometer-thick films prepared by LbL assembly possess enhanced mechanical stability, and allow deposition of a significantly increased amount of materials and the integration of multiple functions. These merits of thick films produced by LbL assembly can result in new functions and allow the functions of ultrathin films fabricated by LbL assembly to be optimized. In this tutorial review, the methods for rapid fabrication of thick polymeric films involving LbL assembly are reviewed. The functions of such films that are relevant to their micrometer thickness are discussed.     

One-step fabrication of ultralow dielectric polyimide films consisting of size-controlled mesoporous nanoparticles

Dielectric materials with ultralow dielectric constants (<2.0) are desiderated in the integrated circuits (ICs). In this work, we fabricated polyimide (PI) films consisting of mesoporous nanoparticles (MPNPs-PF) through a one-step solvent evaporation induced self-assembly method. Poly(amic acid) was selected as the polymer matrix; and the commercial triblock copolymer F127 was adopted as the mesoporous template as well as the nanoparticle morphology controller, respectively. After imidization and template removal, the dense films consisting of closed-packed PI nanoparticles with an average diameter less than 50 nm were obtained. Since the nanoparticles were fully composed of worm-like mesopores, the dielectric constant (k value) of the resultant porous PI films can reach as low as 1.92. When the reactive end-capper of maleic anhydride (MA) was blended into poly(amic acid), k value decreased even lower to 1.86. Meanwhile, the modulus of the resultant porous PI films was higher than 1 GPa.     

Alignment of liquid crystals on ultrathin organized molecular films

Liquid crystal (LC) alignment techniques based on various kinds of ultrathin organized molecular films are reviewed. The mechanisms of LC alignment on the organized films are discussed. For the homeotropic alignment of LCs the main anchoring mechanism is due to the dipole–dipole interaction between polar groups of an aligning agent and LC molecules while the homogeneous alignment is mainly attributed to the orientation of polymer chains or polymer aggregates. An experimental system for an anchoring transition induced by a conformation change of aligning molecules is introduced. Finally the AFM experimental observations on the rubbed polymer films and its mechanisms are summarized.     

Simultaneous direct electrochemiluminescence and catalytic voltammetry detection of DNA in ultrathin films

Direct electrochemiluminescence (ECL) involving DNA was demonstrated in 10 nm films of cationic polymer [Ru(bpy)(2)(PVP)(10)](2+) assembled layer-by-layer with DNA. A square wave voltammetric waveform oxidized the Ru(II) sites in the metallopolymer to Ru(III), and ECL was measured simultaneously with catalytic voltammetric peaks in a simple apparatus. Significant ECL generation occurred only when guanine bases were present on oligonucleotides in the films. This result along with knowledge of proposed ECL pathways suggests that guanine radicals initially formed by catalytic oxidation of guanines by Ru(III) react with the metallopolymer to produce electronically exited Ru(II) sites in the film. ECL and catalytic SWV peaks were sensitive to oligonucleotide hybridization and chemical DNA damage. Simultaneous linear growth of ECL and SWV peaks occurred after incubation with known DNA damage agent styrene oxide over 20 min. The estimated detection limit was 1 damaged DNA base in 1000. Control incubations of metallopolymer/ds-DNA films in buffer containing unreactive toluene resulted in no significant changes of the ECL or SWV peaks.     

PM-IRRAS mapping of ultrathin molecular films with high spatial resolution

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) is a very sensitive technique to characterize the degree of molecular ordering in thin films on metallic surfaces. This is the first report of the coupling of a PM-IRRAS microscope to a free electron laser (FEL), a light source of highest brilliance. Some FELs emit in the infrared region and permit the mapping of molecular properties at high lateral resolution. We studied the molecular orientation of octadecanephosphonic acid (OPA) attached to a gold surface with microstructured aluminum oxide islands on the gold. The spatial resolution achieved is 12 μm which corresponds to the diffraction limit of the infrared light used in this study. This is a substantial improvement compared to previous studies using a PM-IRRA accessory together with a commercial Fourier transform infrared spectrometer, where the lateral resolution is noise-limited rather than diffraction-limited. The spectral maps reveal that OPA is preferably attached to the aluminum oxide islands via the bidentate binding mode whereas the tridentate mode is dominating in case of OPA attached to the gold areas.     

Dielectrophoresis of cellulose nanocrystals and alignment in ultrathin films by electric field-assisted shear assembly

Ultrathin films of cellulose nanocrystals (CNCs) are obtained by using a convective assembly setup coupled with a low-strength external AC electric field. The orientation and degree of alignment of the rod-like nanoparticles are controlled by the applied field strength and frequency used during film formation. Calculated dipole moments and Clausius-Mossotti factors allowed the determination of the critical frequencies, the peak dielectrophoresis as well as the principal orientation of the CNCs in the ultrathin films. As a result of the combination of shear forces and low electric field highly ultrathin films with controlled, unprecedented CNC alignment are achieved.     

Pd-Pt and Fe-Ni nanoparticles formed by covalent molecular assembly in supercritical carbon dioxide

We report the formation of Pd-Pt nanoparticles within a dendrimer-laden ultrathin film matrix immobilized on a solid support and constructed by covalent layer-by-layer (LbL) assembly using supercritical carbon dioxide (SCCO2) as the processing medium. Particle size distribution and composition were controlled by precursor composition. The precursor compositions are optimized for Pd-Pt nanoparticles and later extended to the formation of Fe-Ni nanoparticles. As an example of the application of nanoparticles in tribology, Fe-Ni nanoparticle-laden films were observed to exhibit better tribological properties than those containing the monometallic species, thereby suggesting that combination of nanoparticles can be used to derive greater benefits.     

High modulus polyimide/polyimide molecular composite films that utilize acetylene unit as a crosslink site

Polyimide/polyimide molecular composite (MC) films comprised of a rigid polyimide derived from biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA) and a flexible polyimide derived from BPDA and bis (3,3'-diaminodiphenyl) acetylene (intA) and/or oxydianiline (ODA) were prepared by blending the polyamic acid solutions in 7 : 3 weight ratio, and then imidizing the blend films. Acetylene content in the flexible polyimide backbone was controlled by the ratio of intA and ODA. Cold-drawing of the blend polyamic acid films, followed by imidization, gives high modulus polyimide/polyimide MC films. The modulus of the MC films increased almost linearly with the draw ratio, reaching 25.5 GPa for the 40% drawn film. Acetylene groups in the flexible polyimide can be thermally cured to crosslink. The onset of exotherm appeared at 340°C on DSC, reaching maximum at 398°C. After the thermal crosslinking, the MC films maintained the high modulus, though elongation became small. Taking advantage of the crosslinkable acetylene units, two MC films were laminated and processed at 400°C for 20 min under 100 kg/cm² to give a good-quality laminate film. The interface of the two films was strongly bonded through the crosslinking of acetylene groups. Laminate films maintained the high modulus afforded by the cold-drawing. © 1994 John Wiley & Sons, Inc.     

Stability and disintegration of ultrathin heptane films in water: molecular dynamics simulations

Molecular dynamics simulations of ultrathin heptane films (less than 5 nm in thickness) in water were conducted to study their stability and disintegration behavior. The density distributions of heptane and water molecules across the film were determined for different equilibrium film thicknesses ranging from 1.5 to 4 nm. The potential energy of the system was computed as a function of the heptane number fraction, and the results were employed to determine the excess energy of mixing of heptane in water. The diffusion coefficients of heptane and water obtained from the MD simulations were also compared with experimental data. A good agreement was found between the heptane self-diffusivity obtained from the MD simulations and its literature reported value. Following an analysis of the equilibrium properties of the heptane films and associated structures, we performed simulations where the shapes of the heptane films were initially perturbed. Different perturbations of these ultrathin films led to formation of various associated structures, including cylindrical rodlike heptane droplets, films with holes, and intact films. The different shapes are formed in systems with the same heptane/water composition. An analysis of this behavior is presented showing the possibility of multiple associated structures with similar total energy in these highly confined systems.     

Heterogeneous ultrathin films fabricated by alternate assembly of exfoliated layered double hydroxides and polyanion

Transparent heterogeneous ultrathin films of exfoliated layered double hydroxide (LDHs) nanosheets, fabricated alternately with polyanion, have been obtained via a layer-by-layer electrostatic self-assembly which yields a series of novel LDH films with potential multifunctionality.     

Polydiacetylene nanowires in ultrathin films

In this paper the results of studies carried out on thin films of new poly[bis(carbazol-9-ylmethyl)diacetylene]s (PCDAs) are reported. The preparation of the films has required clever synthesis to make processable the conjugated polymers without degrading their optoelectronic properties. To this end, the parent poly(diacetylene), (polyDCHD), has been modified by introducing long alkyl or acyl chains in the 3 and 6 positions of the carbazole rings. Electronic absorption spectra and linear and nonlinear optical characterization of three types of PCDAs are reported and compared.