等离子体引发HEMA的RAFT接枝聚合改性聚丙烯多孔膜

采用等离子体引发的可逆加成-断裂链转移(RAFT)接枝聚合法,以甲基丙烯酸羟乙酯(HEMA)为单体,对聚丙烯(PP)多孔膜表面作了亲水改性.研究了接枝聚合动力学,并以FT-IR、SEM、压汞、水通量等方法研究了改性膜的表面结构形态及孔结构.结果表明,等离子体引发的RAFT接枝聚合速率显著低于普通等离子体引发的接枝聚合速率.表面接枝率随着接枝聚合时间的延长呈线性增长趋势,同时改性膜的孔径和水通量随之减小.     

聚烯烃分离膜表面改性研究进展

综述了聚烯烃类分离膜表面改性研究的主要进展,着重介绍了高能辐射接枝、光引发接枝、等离子体接枝、表面臭氧处理、以及超临界CO2状态下接枝等表面改性方法的特点,分析了改性后聚烯烃膜的性能,并对聚烯烃分离膜表面改性进行了展望。     

溶剂对等离子体引发的衰减链转移接枝聚合动力学的影响

采用等离子体引发的衰减链转移(DT)接枝聚合法,以丙烯酸(AA)为单体,碘仿为链转移剂,对聚丙烯(PP)薄膜进行表面改性。研究了水和N,N-二甲基甲酰胺(DMF)对等离子体引发聚合及等离子体引发DT聚合动力学的影响。结果表明,采用等离子体引发的方法可以实现DT可控-活性聚合,DMF介质中的可控性优于水介质,等离子体引发DT聚合的溶剂效应明显减弱,接枝量与转化率成正比关系并与FT-IR、接触角的表征结果相符。     

超高分子量聚乙烯纤维表面改性的研究进展

超高分子量聚乙烯(UHMWPE)纤维具有诸多优异性能,因此被广泛应用于纤维增强复合材料(FRP)。但是由于UHMWPE纤维表面光滑且无极性基团,与树脂基体粘接性差,可通过纤维表面改性有效提高FRP的界面强度,进而提升材料性能。本文总结了近几年基于化学处理、等离子体处理、电晕放电和辐射引发表面接枝等方法对UHMWPE纤维表面改性的研究进展,并对改性方法的发展进行了展望。     

等离子体引发甲基丙烯酸缩水甘油酯在聚丙烯膜上的接枝反应及肝素的固定化

等离子体引发甲基丙烯酸缩水甘油酯在聚丙烯膜上的接枝反应及肝素的固定化李刚孙求实後晓淮（中国科学院化学研究所北京１０００８０）关键词甲基丙烯酸缩水甘油酯，肝素，等离子体，等离子体引发接枝聚合利用等离子体表面处理能使高分子材料表面生成自由基，这已被许多...     

聚偏氟乙烯微孔膜的亲水化改性及功能化研究进展

聚偏氟乙烯(PVDF)微孔膜的亲水化改性方法有物理共混、化学共聚、表面涂覆、表面化学处理、表面接枝等几种。其中物理共混和表面涂覆法比较成熟且已获得应用，而PVDF微孔膜的表面化学处理、等离子体或光引发改性技术以及环境敏感性等将成为PVDF微孔膜的改性和功能化研究的主要方向。     

表面温度敏感性聚酯薄膜的制备

通过在聚酯(PET)薄膜表面固定原子转移自由基聚合(ATRP)的引发基团,继而引发接枝聚N-异丙基丙烯酰胺(NIPAM),制备表面具有温度敏感性的聚酯薄膜.利用X射线光电子能谱仪(XPS),衰减全反射傅立叶变换红外光谱仪(FTIR/ATR),扫描电子显微镜(SEM)对接枝改性前后PET薄膜的表面组成,结构和形貌进行分析与表征;利用接触角测试仪对比研究接枝改性前后PET薄膜的表面性能;研究数据表明,随着反应时间的延长,接枝到PET薄膜表面PNIPAM的量在增加.当接枝聚合反应时间为16 h,接枝量达到0.239mg/cm2.表明SI-ATRP具有一定的"活性"特征;接枝PNIPAM改性后的PET薄膜表现出对温度的刺激响应性.     

PEGDA/HEMA水凝胶等离子体表面改性的研究

采用紫外光聚合法合成了聚乙二醇双丙烯酸酯(PEGDA)/甲基丙烯酸-2-羟基乙酯(HEMA)复合凝胶,在不同的条件下进行等离子处理后,紫外光下进行表面接枝改性。在凝胶表面引入亲水性基团,改善材料的亲水性。研究了不同等离子体处理条件及辐射条件对丙烯酰胺(AAm)接枝率的影响。研究表明,丙烯酰胺接枝率随着等离子体处理时间的增加先增大后减小,随着紫外光照射时间、丙烯酰胺浓度的增大而增大。     

表面引发接枝聚合法制备高接枝度的接枝微粒SiO2-g-PMAA

将偶联剂γ-氨丙基三甲氧基硅烷(AMPS)键合在硅胶微粒表面,得到改性微粒AMPS-SiO2;使改性微粒表面的氨基与溶液中的过硫酸铵构成氧化-还原引发体系,实现了甲基丙烯酸(MAA)在硅胶微粒的表面引发接枝聚合,制得了高接枝度(0.30 g/g)的接枝微粒SiO2-g-PMAA;研究了影响表面引发接枝聚合的主要因素。 结果表明,适宜的温度为40 ℃。 已接枝到硅胶表面的聚合物层对后续的接枝聚合产生阻隔作用。 适宜的引发剂用量为单体质量的1.1%,适宜的单体质量分数为5%左右。     

利用等离子体技术研究聚苯乙烯表面的接枝聚合反应

用O₂等离子体对聚苯乙烯(PS)进行预处理, 再用Ar等离子体引发N-乙烯基吡咯烷酮(NVP)在其表面接枝聚合. 通过接触角(CA)及表面自由能(SE)分析, 探讨了O₂等离子体预处理条件对PS表面自由能的影响, 确定了预处理的最佳条件. 通过衰减全反射红外光谱(ATR-FTIR)、X射线光电子能谱(XPS)和动态接触角(DCA)分析, 比较了O₂等离子体预处理前后和接枝聚合前后PS的表面组成及表面性能, 实验结果表明, 利用等离子体技术能成功地将NVP接枝聚合于PS表面, 接枝聚合后的PS表面由于极性高分子链和粗糙度的增加, 亲水性增强, 水滴易在其表面铺展. 由于接枝聚合后PS表面的高分子链在水中发生重构, 使后退角降低幅度较大, 接触角滞后现象明显.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。