Layer-by-layer electrostatic self-assembly of single-wall carbon nanotube polyelectrolytes

We have used anionic and cationic single-wall carbon nanotube polyelectrolytes (SWNT-PEs), prepared by the noncovalent adsorption of ionic naphthalene or pyrene derivatives on nanotube sidewalls, for the layer-by-layer self-assembly to prepare multilayers from carbon nanotubes with polycations, such as poly(diallyldimethylammonium) or poly(allylamine hydrochloride) (PDADMA or PAH, respectively), and polyanions (poly(styrenesulfonate), PSS). This is a general and powerful technique for the fabrication of thin carbon nanotube films of arbitrary composition and architecture and allows also an easy preparation of all-SWNT (SWNT/SWNT) multilayers. The multilayers were characterized with vis-near-IR spectroscopy, X-ray photoelectron spectroscopy (XPS), surface plasmon resonance (SPR) measurements, atomic force microscopy (AFM), and imaging ellipsometry. The charge compensation in multilayers is mainly intrinsic, which shows the electrostatic nature of the self-assembly process. The multilayer growth is linear after the initial layers, and in SWNT/polyelectrolyte films it can be greatly accelerated by increasing the ionic strength in the SWNT solution. However, SWNT/SWNT multilayers are much more inert to the effect of added electrolyte. In SWNT/SWNT multilayers, the adsorption results in the deposition of 1-3 theoretical nanotube monolayers per adsorbed layer, whereas the nominal SWNT layer thickness is 2-3 times higher in SWNT/polyelectrolyte films prepared with added electrolyte. AFM images show that the multilayers contain a random network of nanotube bundles lying on the surface. Flexible polyelectrolytes (e.g., PDADMA, PSS) probably surround the nanotubes and bind them together. On macroscopic scale, the surface roughness of the multilayers depends on the components and increases with the film thickness.     

Persistence length control of the polyelectrolyte layer-by-layer self-assembly on carbon nanotubes

We have studied layer-by-layer polyelectrolyte self-assembly on pristine individual single-wall carbon nanotubes as a function of solution ionic strength. We report the existence of an ionic strength threshold for the deposition, below which the majority of nanotubes remain uncoated. Once the ionic strength reaches the threshold value, the majority of the individual nanotubes become coated with polyelectrolytes. Our results indicate that the self-assembly process likely involves wrapping of polymer chains around nanotubes and that the polymer chain's ability to bend in order to accommodate the nanotube curvature is one of the critical parameters controlling layer-by-layer electrostatic self-assembly on these one-dimensional templates.     

Alternate assemblies of polyelectrolyte functionalized carbon nanotubes and platinum nanoparticles as tunable electrocatalysts for dioxygen reduction

A novel method based on electrostatic layer-by-layer self-assembly (LBL) technique for alternate assemblies of polyelectrolyte functionalized multi-walled carbon nanotubes (MWNTs) and platinum nanoparticles (PtNPs) is proposed. The shortened MWNTs can be functionalized with positively charged poly(diallyldimethylammonium chloride) (PDDA) based on electrostatic interaction. Through electrostatic layer-by-layer assembly, the positively charged PDDA functionalized MWNTs (PDWNTs) and negatively charged citrate-stabilized PtNPs were alternately assembled on a 3-mercaptopropanesulfonic sodium (MPS) modified gold electrode and also on other negatively charged surface, e.g. quartz slide and indium–tin-oxide (ITO) plate, directly forming the three-dimensional (3D) nanostructured materials. This is a very general and powerful technique for the assembling three-dimensional nanostructured materials containing carbon nanotubes (CNTs) and nanoparticles. Thus prepared multilayer films were characterized by ultraviolet–visible–near-infrared spectroscopy (UV–vis–NIR), scanning electron microscopy (SEM) and cyclic voltammetry (CV). Regular growth of the mutilayer films is monitored by UV–vis–NIR. SEM provides the morphology of the multilayer films. The PtNPs containing multilayer films exhibit high electrocatalytic activity for the reduction of dioxygen. Furthermore, the electrocatalytic activity of the films could be further tailored by simply choosing different cycles in the LBL process. This assembling method for polyelectrolyte functionalized carbon nanotubes and nanoparticles introduces new opportunities for the incorporation of various functionalities into nanotube devices, which, in turn, opens up the possibility of building more complex multicomponent nanostructures.     

Layer-by-layer assembled multilayer films of titanate nanotubes, Ag- or Au-loaded nanotubes, and nanotubes/nanosheets with polycations

Aqueous suspensions of hydrothermally synthesized titanate nanotubes and poly(diallyldimethylammonium chloride) (PDDA) have been employed to fabricate multilayer films on various substrates in a layer-by-layer fashion. Atomic force microscopy displays the dense coverage of the substrate surface by the nanotubes. UV-vis absorption spectroscopy confirms the consecutive growth of PDDA/nanotube layer pairs. Single crystalline Ag and Au nanoparticles with narrow size distribution spatially correlating with the nanotubes have been obtained by treating the nanotubes with AgNO(3) or HAuCl(4) aqueous solution followed by chemical reduction. The noble metal nanoparticles show a strong surface plasmon absorption band. A multilayer film construction of the noble-metal-loaded nanotubes has also been achieved. This process has been further extended to the heteroassembly of nanotubes/nanosheets in different layer sequences.     

Layer-by-layer self-assembly of multiwalled carbon nanotube polyelectrolytes prepared by in situ radical polymerization

Anionic and cationic multiwalled carbon nanotube polyelectrolytes, prepared by covalent modification of multiwalled carbon nanotubes (MWCNTs) with poly(acrylic acid) and poly(acrylamide), were used for the layer-by-layer (LBL) self-assembly of MWCNTs on different substrates with polyelectrolytes, such as poly(diallyldimethylammonium chloride) and sodium poly(styrenesulfonate). Thermogravimetric analysis, Raman spectroscopy, and scanning electron microscopy (SEM) were used to demonstrate the modification of MWCNTs. Investigations using Fourier transform infrared spectroscopy, atomic force microscopy, SEM, and ultraviolet-visible spectroscopy proved this method to be practicable for preparing LBL films.     

Preparation and layer-by-layer self-assembly of positively charged multiwall carbon nanotubes

The report described a method of more stably dispersing oxidized carbon nanotubes (CNTs) by forming complex with polycation and the layer-by-layer self-assembly behavior of the complex with polyanion was studied. The properties of the self-assembled multilayer film containing carbon nanotubes were studied. Cyclic voltammetry, UV-vis-NIR spectroscopy, electrochemical impedance spectroscopy and scanning electron microscopy were used for characterization of film assembly. UV-vis-NIR spectroscopy and cyclic voltammetry study indicated the uniform growth of the film. Electrochemical impedance spectroscopy results showed that incorporating of carbon nanotubes in the polyelectrolyte multilayers decreased in the electron-transfer resistance R_ct, indicating more favorable electrochemical reaction interface. The electrocatalytic property of the multilayer modified electrode to NADH was investigated mainly with different numbers of the bilayers and the results showed that along with the increase of the assembled bilayers the overpotential of NADH oxidation decreased. The detection limit could reach 6 μM at a detection potential of 0.4 V.     

Functionalized multiwall carbon nanotube/gold nanoparticle composites

Multiwall carbon nanotubes (MWCNTs) were chemically oxidized in a mixture of sulfuric acid and nitric acid (3:1) while being ultrasonicated. The effect of oxidative ultrasonication at room temperature on development of functional groups on the carbon nanotubes was investigated. The dispersability and the carboxylic acid group concentration of functionalized MWCNTs (fMWNTs) varied with reaction time. The concentration of carboxylic acid groups on fMWNTs increased from 4 x 10(-4) mol/g of fMWNTs to 1.1 x 10(-3) mol/g by doubling the treatment period from 4 to 8 h. The colloidal stability of aqueous fMWCNTs dispersions was enhanced through elongated oxidation. fMWCNTs that were reacted longer than 4 h did not precipitate in aqueous media for at least 24 h. The layer-by-layer self-assembly of polyelectrolytes on fMWCNTs was characterized by zeta potential measurements. The zeta potential of fMWCNTs changed from negative charge to positive charge when cationic polyelectrolytes were self-assembled on their surface. With addition of anionic polyelectrolytes, cationic polyelectrolyte coated fMWCNTs showed the expected charge reversal as expected for multilayer self-assembly. Complex formation of positively charged gold nanoparticles and negatively charged fMWCNTs was achieved with and without polyelectrolyte coatings by electrostatic interaction. The complex formation was characterized by high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy. The here found complex formation of positively charged colloidal gold and defect sites on fMWNTs indicates the location of functional groups on carbon nanotubes. It is suggested that positively charged colloids such as gold nanoparticles could be used for detection of defect sites on carbon nanotubes.     

Patterned polyelectrolyte multilayer: surface modification for enhancing selective adsorption

This paper describes the use of surface chemical modification to enhance the difference of the surface charge on a patterned polyelectrolyte multilayer, which can be used for selectively adsorbing functional materials. We fabricated a patterned multilayer by combining the layer-by-layer self-assembly technique and photolithography and taking advantage of the different solubility of polyelectrolyte multilayers of diazo resins (DAR)/poly(acrylic acid) before and after UV irradiation. This patterned surface can be used as a matrix for selective adsorption of small molecular dyes, such as Methylene Blue. However the difference in surface charge on the patterned surface was not enough when we used it to selectively adsorb polystyrene (PS) nanoparticles using electrostatic force as the driving force. Therefore, we modified the patterned surface by interfacial chemistry. After modification, the patterned polyelectrolyte multilayer can be used as a good matrix for selective adsorption of PS nanoparticles with both positive and negative charges.     

Highly flexible polyelectrolyte nanotubes

A pressure-filter-template approach was employed to prepare polyelectrolyte nanotubes through layer-by-layer deposition in the alumina template. With the thicker wall, the ordered polymer nanotubes possess a high flexibility. The results demonstrate that the electrostatic interactions of polyelectrolytes play a key role in fabricating water-soluble charged polymer nanotubes. The structure of the polyelectrolyte nanotube was confirmed by SEM, TEM, and UV, respectively.     

Cellulose Nanocrystal-Assisted Dispersion of Luminescent Single-Walled Carbon Nanotubes for Layer-by-Layer Assembled Hybrid Thin Films

Highly stable single-walled carbon nanotube (SWNT) dispersions are obtained after ultrasonication in cellulose nanocrystal (CN) aqueous colloidal suspensions. Mild dispersion conditions were applied to preserve the SWNT length in order to facilitate the identification of hybrid objects. This led to a moderate dispersion of 24% of the SWNTs. Under these conditions, atomic force microscopy (AFM) and transmission electron microscopy (TEM) experiments succeeded in demonstrating the formation of hybrid particles in which CNs are aligned along the nanotube axis by a self-assembly process. These SWNT/CN dispersions are used to create multilayered thin films with the layer-by-layer method using polyallylamine hydrochloride as a polyelectrolyte. Homogeneous films from one to eight bilayers are obtained with an average bilayer thickness of 17 nm. The presence of SWNTs in each bilayer is attested to by characteristic Raman signals. It should be noted that these films exhibit a near-infrared luminescence signal due to isolated and well-separated nanotubes. Furthermore, scanning electron microscopy (SEM) suggests that the SWNT network is percolating through the film.     

Biopolymer and carbon nanotubes interface prepared by self-assembly for studying the electrochemistry of microperoxidase-11

Stable films of biopolymer chitosan and carbon nanotubes were prepared by a layer-by-layer self-assembly technique. Atomic force microscopy, scanning electron microscopy, cyclic voltammetry, and UV-vis spectroscopy were used to characterize the film assembly. Atomic force microscopy and scanning electron microscopy showed that an even, stable film was formed. The UV-vis spectroscopy and cyclic voltammetry study indicated the uniform growth of the film. The property of the self-assembled multilayer film in promoting protein electron transfer was demonstrated by incorporating microperoxidase-11 in the film. Microperoxidase-11 in the multilayer film could transfer electrons with the electrode indicating that carbon nanotubes could wire the protein to the electrode. The electrocatalytic activity of the microperoxidase-11 containing multilayer film-modified electrode toward H(2)O(2) and O(2) was investigated. The results showed that along with the increase in the assembled layers the electrocatalytic reduction potentials of H(2)O(2) and O(2) shifted positively. The prepared multilayer film of chitosan and carbon nanotubes containing protein was a sensitive interface for electrocatalytic study.     

Growth Mechanism of Vertically Aligned Carbon Nanotube Arrays

Vertically aligned multi-walled carbon nanotube arrays grown on quartz substrate are obtained by co-pyrolysis of xylene and ferrocene at 850 oC in a tube furnace. Raman spectroscopy and high resolution transmission electron microscopy measurements show that the single-walled carbon nanotubes are only present on top of vertically aligned multi-walled carbon nanotube arrays. It has been revealed that isolated single-walled carbon nanotubes are only present in those floating catalyst generated materials. It thus suggests that the single-walled carbon nanotubes here are also generated by floating catalyst. Vertically alignedcarbon nanotube arrays on the quartz substrate have shown good orientation and good graphitization. Meanwhile, to investigate the growth mechanism, two bi-layers carbon nan-otube films with di erent thickness have been synthesized and analyzed by Raman spectroscopy. The results show that the two-layer vertically aligned carbon nanotube films grow “bottom-up”. There are distinguished Raman scattering signals for the second layer itself, surface of the first layer, interface between the first and second layer, side wall and bottom surface. It indicates that the obtained carbon nanotubes follow the base-growth mechanism, and the single-walled carbon nanotubes grow from their base at the growth beginning when iron catalyst particles have small size. Those carbon nanotubes with few walls (typically <5 walls) have similar properties, which also agree with the base-growth mechanism.     

Covalent assembly of shortened multiwall carbon nanotubes on polyelectrolyte films and relevant electrochemistry study

A significant and versatile approach was developed for perpendicularly aligning multiwall carbon nanotubes on diverse substrates suitable for layer-by-layer self-assembly. The multiwall carbon nanotubes (s-MWNTs) used were shortened with oxidation under ultrasonic and functionalized with acyl chloride in thionyl chloride (SOCl2). The monolayer of s-MWNTs perpendicularly grafted to the substrate was obtained by dipping the polyelectrolyte modifying substrate into a tetrahydrofuran suspension of the functionalized s-MWNTs. The interaction proved to be stable and not liable to be affected by the ambience. Transmission electron microscopy and atomic force microscopy were used to examine the morphology of the MWNTs and s-MWNTs grafted on the substrates. Raman spectroscopy was applied to verify the existence of s-MWNTs for assembly, and Fourier transform infrared absorption spectra were used to investigate the interaction pattern between s-MWNTs and polyelectrolyte. The electrochemistry properties of the monolayer of s-MWNTs when the substrate was indium-tin oxide were studied.     

Layer-by-layer self-assembly of single-walled carbon nanotubes with amine-functionalized weak polyelectrolytes for electrochemically tunable pH sensitivity

The layer-by-layer (LbL) assembly of carboxylated single-walled carbon nanotubes (SWCNT) is demonstrated to tune the electrochemical pH sensitivity of thin-film devices. The positively charged amine containing weak polyelectrolyte (wPE) is used as a counter species to control the proximal ions. The LbL assembly process is monitored by the quartz crystal microbalance, which results in the linear growth of a multilayer. The amount adsorbed is strongly dependent on the surface charge of previously deposited species. However, the thickness of the multilayer is determined by both the amount adsorbed and the coiling of polyelectrolyte chains. Indeed, electrical and structural characteristics of the (wPE/SWCNT) multilayer thin film are obtained according to the acid dissociation constants of amino groups in wPE. The electrochemical pH sensitivity in the physiological range demonstrates the effects of both charge carrier doping/trapping and proximal ions on the conductance of the SWCNT multilayer. Although doping/trapping shows the decreasing conductance, the proximal ion effect reveals the increasing conductance with pH in the basic region as a result of the p-type semiconducting nature of SWCNTs and the ability of wPE to capture hydrogen ions. This work sheds light on the applicability of nanostructured and/or engineered functional thin films of SWCNTs as chemical and biological sensors.     

三步升温法合成阵列碳纳米管

本文使用结构简单的单温炉设备, 以二茂铁/三聚氰胺混合物为原料, 采用独特的三步升温方法于光滑的SiO₂衬底上合成出了大面积的阵列碳纳米管, 并对碳纳米管的形貌和结构进行了研究.     

Renewable nanocomposite layer-by-layer assembled catalytic interfaces for biosensing applications

A novel, easily renewable nanocomposite interface based on layer-by-layer (LbL) assembled cationic/anionic layers of carbon nanotubes customized with biopolymers is reported. A simple approach is proposed to fabricate a nanoscale structure composed of alternating layers of oxidized multiwalled carbon nanotubes upon which is immobilized either the cationic enzyme organophosphorus hydrolase (OPH; MWNT-OPH) or the anionic DNA (MWNT-DNA). The presence of carbon nanotubes with large surface area, high aspect ratio and excellent conductivity provides reliable immobilization of enzyme at the interface and promotes better electron transfer rates. The oxidized MWNTs were characterized by thermogravimetric analysis and Raman spectroscopy. Fourier transform infrared spectroscopy showed the surface functionalization of the MWNTs and successful immobilization of OPH on the MWNTs. Scanning electron microscopy images revealed that MWNTs were shortened during sonication and that LbL of the MWNT/biopolymer conjugates resulted in a continuous surface with a layered structure. The catalytic activity of the biopolymer layers was characterized using absorption spectroscopy and electrochemical analysis. Experimental results show that this approach yields an easily fabricated catalytic multilayer with well-defined structures and properties for biosensing applications whose interface can be reactivated via a simple procedure. In addition, this approach results in a biosensor with excellent sensitivity, a reliable calibration profile, and stable electrochemical response.     

两亲性聚合物修饰碳纳米管研究进展

随着两亲性共聚物在越来越多的领域显示出其功能,它的重要理论和应用意义正为人们所认识。用它来修饰碳纳米管,将会赋予碳纳米管更加优异的性能,因此为碳纳米管的研究提供了一个方向。本文综述了两亲性聚合物修饰碳纳米管表面的研究进展,从化学修饰和物理吸附、包裹两种修饰手段入手,着重介绍了两亲性聚合物化学修饰碳纳米管的方法和研究状况。最后,对修饰后的两亲性聚合物碳纳米管的分散性和自组装行为进行了综述。     

Layer-by-Layer Construction of Novel Biofunctional Fluorescent Microparticles for Immunoassay Applications

A novel class of biofunctional fluorescent microparticles for application in immunoassays was constructed by using the layer-by-layer self-assembly method to deposit multiple layers of fluorescently labeled polyelectrolytes onto colloidal particles, followed by deposition of a protein (immunoglobulin G, IgG) layer. Microelectrophoresis experiments revealed alternating negative and positive zeta-potentials with deposition of each successive polyelectrolyte layer, indicating that the alternate electrostatic adsorption of polyelectrolytes of opposite charge was successfully achieved. Transmission electron microscopy images showed a change of the particle surface texture after polyelectrolyte multilayer deposition. Fluorescence microscopy image (FMI) analysis provided direct measurement of the fluorescence intensity of single microparticles. The observed systematic increase of the fluorescence intensity of individual microparticles with increasing polyelectrolyte layer number from FMI analysis further demonstrated the controlled regular adsorption of polyelectrolyte layers onto the polystyrene (PS) particles. Protein immobilization onto the polyelectrolyte multilayer-coated particles was verified by the different surface properties of the microparticles with respect to surface charge under pH conditions above and below the isoelectric point of the proteins. The assembly of IgG and fluorescein isothiocyanate-labeled IgG onto polyelectrolyte multilayer-coated PS microparticles and their potential use was ultimately confirmed by a solid phase immunotest. Copyright 2001 Academic Press.     

Chemically Modified Carbon Nanotubes for Use in Electroanalysis

The discovery of carbon nanotubes has had a profound impact on many areas of science and technology, not least that of electroanalysis. The properties and applications of carbon nanotubes themselves have been well reviewed in the literature and a number of reviews with an electrochemical emphasis have been published. However, the modification of carbon nanotubes has recently been the focus of much research, primarily to improve their solubility in various solvents. Yet modified carbon nanotube electrodes also allow the electrochemist to tailor the properties of the carbon nanotubes, or the electrode surface to impart desired properties such as enhanced sensing capabilities. In this review we attempt to comprehensively cover the different chemical and electrochemical modification strategies and research carried out using modified carbon nanotubes for electroanalytical and bioanalytical applications. Furthermore we also discuss the use of modified carbon nanotubes in electrocatalysis and biocatalysis from an analytical aspect, as well as seeking to dispel some of the myths surrounding the “electrocatalytic” properties of carbon nanotubes.     

基于层层自组装的CuTsPc/DPDCH纳米管的制备

在阳极多孔氧化铝模板中利用层层自组装技术制备出了高度有序的聚电解质磺化酞菁铜(CuTsPc)/4,4′-联吡啶盐酸盐(DPDCH)纳米管, 并对其组装过程用UV-Vis, XRD和FT-IR进行了分析, 纳米管的微观形貌通过SEM和TEM进行表征. 结果表明, 第一层 CuTsPc和第二层DPDCH在AAO模板上的沉积平衡时间均约为60 min, 沉积过程主要有三个阶段: 模板孔外的吸附过程、孔内扩散控制的沉积过程和孔内表面沉积控制过程. CuTsPc主要以磺酸根吸附于AAO模板上. CuTsPc/DPDCH纳米管为非晶态体系. CuTsPc/DPDCH纳米管的外径和壁厚分别为200和20 nm, 外径受控于AAO模板的孔径, 壁厚与组装的层数有关, 利用此方法还可以制备其他带有相反电荷的有机小分子对纳米管或纳米线.