Nanofluid flow and heat transfer due to a stretching cylinder in the presence of magnetic field

In this paper, flow and heat transfer of a nanofluid over a stretching cylinder in the presence of magnetic field has been investigated. The governing partial differential equations with the corresponding boundary conditions are reduced to a set of ordinary differential equations with the appropriate boundary conditions using similarity transformation, which is then solved numerically by the fourth order Runge–Kutta integration scheme featuring a shooting technique. Different types of nanoparticles as copper (Cu), silver (Ag), alumina (Al₂O₃) and titanium oxide (TiO₂) with water as their base fluid has been considered. The influence of significant parameters such as nanoparticle volume fraction, nanofluids type, magnetic parameter and Reynolds number on the flow and heat transfer characteristics is discussed. It was found that the Nusselt number increases as each of Reynolds number or nanoparticles volume fraction increase, but it decreases as magnetic parameter increase. Also it can be found that choosing copper (for small of magnetic parameter) and alumina (for large values of magnetic parameter) leads to the highest cooling performance for this problem.     

Series solutions for steady three-dimensional stagnation point flow of a nanofluid past a circular cylinder with sinusoidal radius variation

This article deals with the study of the steady three-dimensional stagnation point flow of a nanofluid past a circular cylinder that has a sinusoidal radius variation. By means of similarity transformation, the governing partial differential equations are reduced into highly non-linear ordinary differential equations. The resulting non-linear system has been solved analytically using an efficient technique namely homotopy analysis method (HAM). Expressions for velocity and temperature fields are developed in series form. In this study, three different types of nanoparticles are considered, namely alumina (Al₂O₃), titania (TiO₂), and copper (Cu) with water as the base fluid. For alumina–water nanofluid, graphical results are presented to describe the influence of the nanoparticle volume fraction φ and the ratio of the gradient of velocities c on the velocity and temperature fields. Moreover, the features of the flow and heat transfer characteristics are analyzed and discussed for foregoing nanofluids. It is found that the skin friction coefficient and the heat transfer rate at the surface are highest for copper–water nanofluid compared to the alumina–water and titania–water nanofluids.     

A similarity solution for the flow and heat transfer over a moving permeable flat plate in a parallel free stream

This paper presents both a numerical and analytical study in connection with the steady boundary layer flow and heat transfer induced by a moving permeable semi-infinite flat plate in a parallel free stream. Both the velocities of the flat plate and the free stream are proportional to x ^1/3. The surface temperature is assumed to be constant. The governing partial differential equations are converted into ordinary differential equations by a new similarity transformation. Numerical results for the flow and heat transfer characteristics are obtained for various values of the moving parameter, transpiration parameter and the Prandtl number. Approximate analytical solutions are also obtained when the suction or injection parameter is very large. It is found that dual solutions exist for the case when the fluid and the plate move in the opposite directions.     

Numerical solutions of free convection boundary layer flow on a solid sphere with Newtonian heating in a micropolar fluid

In this paper, the problem of free convection boundary layer flow on a solid sphere in a micropolar fluid with Newtonian heating, in which the heat transfer from the surface is proportional to the local surface temperature, is considered. The transformed boundary layer equations in the form of partial differential equations are solved numerically using an implicit finite-difference scheme. Numerical solutions are obtained for the local wall temperature, the local skin friction coefficient, as well as the velocity, angular velocity and temperature profiles. The features of the flow and heat transfer characteristics for different values of the material or micropolar parameter K, the Prandtl number Pr and the conjugate parameter γ are analyzed and discussed.     

Slip effects on unsteady mixed convection of hybrid nanofluid flow near the stagnation point

The unsteady mixed convection of the Al2O3-Cu/H2O hybrid nanofluid flow near the stagnation point past a vertical plate is analyzed. The bvp4c technique is used to solve the resulting ordinary differential equations. The combined effects of the velocity and thermal slip are addressed. The effects of different relevant physical parameters are studied numerically. The results show that the heat transfer rate is reduced when the volume fraction of the nanoparticles increases, while the unsteadiness...     

Mixed convection adjacent to inclined flat surfaces embedded in a porous medium

An analysis is performed to study the flow and heat transfer characteristics of laminar mixed convection boundary layer flows from inclined (including horizontal and vertical) surfaces embedded in a saturated porous medium with constant aiding external flows and uniform surface temperature. Both the streamwise and normal components of the buoyancy forces are retained in the momentum equations. Nondimensionalization of the boundary layer equations results in the following three governing parameter: (1)Gr/Re, the ratio of the Grashof number to the Reynolds number; (2)Pe _x =Re _x Pr, the Peclet number; (3) φ, the angle of inclination from the horizontal. The resulting nonsimilar equations are solved by an efficient implicit finite-difference scheme. Numerical results are presented for flows with different values ofGr/Re in the range of 0 to 50, over a wide range of the Peclet numbersPe _x, and various values of φ ranging from 0 to 90 degrees. It is found that the local surface heat transfer rate increases with increasing the local Peclet number. In addition, as the plate is tilted from the horizontal to the vertical orientation, the local Nusselt number increases for a given Peclet number and the effect of the buoyancy force on the surface heat transfer rate increases.     

Steady laminar mixed convection stagnation-point flow of a nanofluid over a vertical permeable surface in the presence of a magnetic field

A similarity solution for a steady laminar mixed convection boundary layer flow of a nanofluid near the stagnation point on a vertical permeable plate with a magnetic field and a buoyancy force is obtained by solving a system of nonlinear ordinary differential equations. These equations are solved analytically by using a new kind of a powerful analytic technique for nonlinear problems, namely, the homotopy analysis method (HAM). Three different types of nanoparticles, namely, copper (Cu), alumina (Al₂O₃), and titanium oxide (TiO₂), with water as the base fluid are considered. The influence of the volume fraction of nanoparticles, permeability parameter, magnetic parameter, and mixed convection parameter on the surface shear stress and surface heat transfer, as well as on the velocity and temperature profiles, is considered. It is observed that the skin friction coefficient and the local Nusselt number increase with the nanoparticle volume fraction for all types of nanoparticles considered in this study. The greatest values of the skin friction coefficient and the local Nusselt number are obtained for Cu nanoparticles.     

Mixed convection boundary layer flow over a horizontal circular cylinder with Newtonian heating

The steady mixed convection boundary layer flow over a horizontal circular cylinder, generated by Newtonian heating in which the heat transfer from the surface is proportional to the local surface temperature, is considered in this study. The governing boundary layer equations are first transformed into a system of non-dimensional equations via the non-dimensional variables, and then into non-similar equations before they are solved numerically using a numerical scheme known as the Keller-box method. Numerical solutions are obtained for the skin friction coefficient Re ^1/2 C _f and the local wall temperature θ _w (x) as well as the velocity and temperature profiles with two parameters, namely the mixed convection parameter λ and the Prandtl number Pr.     

Unsteady natural convection Couette flow of heat generating/absorbing fluid between vertical parallel plates filled with porous material

The extended Brinkman Darcy model for momentum equations and an energy equation is used to calculate the unsteady natural convection Couette flow of a viscous incompressible heat generating/absorbing fluid in a vertical channel(formed by two infinite vertical and parallel plates) filled with the fluid-saturated porous medium.The flow is triggered by the asymmetric heating and the accelerated motion of one of the bounding plates.The governing equations are simplified by the reasonable dimensionless parameters and solved analytically by the Laplace transform techniques to obtain the closed form solutions of the velocity and temperature profiles.Then,the skin friction and the rate of heat transfer are consequently derived.It is noticed that,at different sections within the vertical channel,the fluid flow and the temperature profiles increase with time,which are both higher near the moving plate.In particular,increasing the gap between the plates increases the velocity and the temperature of the fluid,however,reduces the skin friction and the rate of heat transfer.     

Dual solutions of a mixed convection flow near the stagnation point region over an exponentially stretching/shrinking sheet in nanofluids

The aim of this paper is to study the development of mixed convection flow near the stagnation point region over an exponentially stretching/shrinking sheet in nanofluids. The external flow, stretching velocity and wall temperature are assumed to vary as prescribed exponential functions. Using the local similarity method, it has been shown that dual solutions of velocity and temperature exist for certain values of suction/injection, mixed convection, nanoparticle volume fraction and stretching/shrinking parameters. The transformed non-linear ordinary differential equations along with the boundary conditions form a two point boundary value problem and are solved using Shooting method, by converting into an initial value problem. In this method, the system of equations is converted into a set of first order system which is solved by fourth-order Runge–Kutta method. Three different types of nanoparticles, namely copper (Cu), aluminum oxide (Al₂O₃) and titanium oxide (TiO₂) are considered by using water-based fluid with Prandtl number Pr = 6.2. It is also found that the skin friction coefficient and the heat transfer rate at the surface are highest for Copper–water nanofluids as compared to Al₂O₃. The effect of the solid volume fraction parameter φ of the nanofluids on the heat transfer characteristics is also investigated. The results indicate that dual solutions exist only for shrinking sheet. The effects of various parameters on the velocity and temperature profiles are also presented here.     

Laminar convective heat transfer of non-Newtonian nanofluids with constant wall temperature

Nanofluids are obtained by dispersing homogeneously nanoparticles into a base fluid. Nanofluids often exhibit higher heat transfer rate in comparison with the base fluid. In the present study, forced convection heat transfer under laminar flow conditions was investigated experimentally for three types of non-Newtonian nanofluids in a circular tube with constant wall temperature. CMC solution was used as the base fluid and γ-Al₂O₃, TiO₂ and CuO nanoparticles were homogeneously dispersed to create nanodispersions of different concentrations. Nanofluids as well as the base fluid show shear thinning (pseudoplastic) rheological behavior. Results show that the presence of nanoparticles increases the convective heat transfer of the nanodispersions in comparison with the base fluid. The convective heat transfer enhancement is more significant when both the Peclet number and the nanoparticle concentration are increased. The increase in convective heat transfer is higher than the increase caused by the augmentation of the effective thermal conductivity.     

An exact solution of boundary layer flow over a moving surface embedded into a nanofluid in the presence of magnetic field and suction/injection

The effects of magnetic field, suction/injection, nanoparticles type, and nanoparticle volume fraction on heat transfer characteristics and mechanical properties of a moving surface embedded into cooling medium consists of water with Cu, Ag or Al₂O₃ particles are studied. The governing boundary layer equations are transformed to ordinary differential equations containing, suction/injection parameter, magnetic parameter, nanoparticle and volume fraction. These equations are solved analytically. The velocity and temperature profiles within the boundary layer are plotted and discussed in details for various values of the different parameters.     

Similarity solution of mixed convection over a horizontal moving plate

Investigation to the mixed convective heat and mass transfer over a horizontal plate has been carried out. By applying transformation group theory to analysis of the governing equations of continuity, momentum, energy and diffusion, we show the existence of similarity solution for the problem provided that the temperature and concentration at the wall are proportional to x ^4/(7-5n) and that the moving speed of the plate is proportional to x ^(3-n)/(7-5n), and further obtain a similarity representation of the problem. The similarity equations have been solved numerically by a fourth-order Runge–Kutta scheme. The numerical results obtained for Pr=0.72 and various values of the parameters Sc, K ₁, K ₂ and K ₃ reveals the influence of the parameters on the flow, heat and mass transfer behavior.     

TiO<Subscript>2</Subscript>-water nanofluid in a porous channel under the effects of an inclined magnetic field and variable thermal conductivity

The TiO₂-water based nanofluid flow in a channel bounded by two porous plates under an oblique magnetic field and variable thermal conductivity is formulated as a boundary-value problem (BVP). The BVP is analytically solved with the homotopy analysis method (HAM). The result shows that the concentration of the nanoparticles is independent of the volume fraction of TiO₂ nanoparticles, the magnetic field intensity, and the angle. It is inversely proportional to the mass diffusivity. The fluid speed decreases whereas the temperature increases when the volume fraction of the TiO₂ nanoparticles increases. This confirms the fact that the occurrence of the TiO₂ nanoparticles results in the increase in the thermal transfer rate. The fluid speed decreases and the temperature increases for both the pure water and the nanofluid when the magnetic field intensity and angle increase. The maximum velocity does not exist at the middle of the symmetric channel, which is in contrast to the plane-Poiseuille flow, but it deviates a little bit towards the lower plate, which absorbs the fluid with a very low suction velocity. If this suction velocity is increased, the temperature in the vicinity of the lower plate will be increased. An explicit expression for the friction factor-Reynolds number is then developed. It is shown that the Hartmann number of the nanofluid is smaller than that of pure water, while the Nusselt number of the nanofluid is larger than that of pure water. However, both the parameters increase if the magnetic field intensity increases.     

Coupled heat and mass transfer in mixed convection over a vertical flat plate embedded in saturated porous media: PST/PSC or PHF/PMF

A boundary layer analysis is used to investigate the heat and mass transfer characteristics of mixed convection about a vertical flat plate embedded in a saturated porous medium under the coupled effects of thermal and mass diffusion. The plate is maintained at prescribed surface temperature/concentration (PST/PSC) or prescribed heat/mass flux (PHF/PMF). The nonsimilar governing equations are obtained by using a suitable transformation and solved by Keller box method. Numerical results for the local heat transfer rate and the local mass transfer rate are presented for various parameters. The local heat and mass transfer rates increase with increasing n and m and buoyancy parameter ξ. When buoyancy parameter ξ is very small (large) the value of local Nusselt and the local Sherwood number correspond with the pure forced (free) convection, respectively. Increasing buoyancy ratio N (or N ^*) increases the local heat and mass transfer rates. It is apparent that Lewis number has a pronounced effect on the local mass transfer rate than it does on the local heat transfer rate. Furthermore, increasing Lewis number decreases (increases) the local heat (mass) transfer rate. Received on 8 December 1997     

Scaling group transformation for MHD boundary layer flow over permeable stretching sheet in presence of slip flow with Newtonian heating effects

Taking into account the slip flow effects, Newtonian heating, and thermal radiation, two-dimensional magnetohydrodynamic （MHD） flows and heat transfer past a permeable stretching sheet are investigated numerically. We use one parameter group transformation to develop similarity transformation. By using the similarity transformation, we transform the governing boundary layer equations along with the boundary conditions into ordinary differential equations with relevant boundary conditions. The obtained ordinary differential equations are solved with the fourth-fifth order Runge-Kutta- Fehlberg method using MAPLE 13. The present paper is compared with a published one. Good agreement is obtained. Numerical results for dimensionless velocity, temperature distributions, skin friction factor, and heat transfer rates are discussed for various values of controlling parameters.     

Oblique stagnation-point flow and heat transfer towards a shrinking sheet with thermal radiation

An analysis is made of steady two-dimensional oblique stagnation-point flow and radiative heat transfer of an incompressible viscous fluid towards a shrinking sheet which is shrunk in its own plane with a velocity proportional to the distance from a fixed point. Here the axis of the stagnation flow and that of the shrinking sheet are not aligned. A similarity transformation reduces the Navier-Stokes equations to a set of non-linear ordinary differential equations and are solved numerically using a shooting technique. The analysis of the results obtained shows that multiple solutions exist for a certain range of the ratio of the shrinking velocity to the free stream velocity. The effect of non-alignment for the wall shear stress and the horizontal velocity components are discussed. Streamline patterns are also shown for shrinking at the sheet with aligned and non-aligned cases. It is found that the temperature at a point in the fluid decreases with increase in effective Prandtl number (Pr _eff ). The results pertaining to the present study indicate that as Pr _eff increases, the rate of heat transfer also increases. The reported results are in good agreement with the available published work in the literature.     

Chebyshev finite difference approach to modeling the thermoviscosity effect in a power-law liquid film on an unsteady stretching surface

The effect of thermoviscosity (temperature-dependent viscosity) on the heat transfer in a power-law liquid film over an unsteady stretching sheet is investigated. Similarity analysis is used to transform the governing equations for mass, momentum and energy into a system of ordinary differential equations, which contain a thermoviscosity parameter θ_r, unsteadiness parameter S, generalized Prandtl number Pr and power-law index n. The film thickness, the temperature distributions, the local heat transfer rate, and the local skin-friction coefficient were obtained using the Chebyshev finite difference method (ChFD). The results show that thermoviscosity significantly increases the film thickness and the local heat transfer rate while decreasing the local skin-friction coefficient as θ_r → 1. It is found that liquids with a higher power-law index will have a larger film thickness and a higher free-surface temperature, which indicate a lower local heat transfer rate, ?θ′(0).     

Study on laminar film condensation of saturated steam on a vertical flat plate for consideration of various physical factors including variable thermophysical properties

The extended theory of the steady state laminar film condensation process of pure saturated vapour at atmospheric pressure on an isothermal vertical flat plate is established. Its equations provide a complete account of the physical process for consideration of various physical factors including variable thermophysical properties, except for surface tension at the liquid-vapour film interface. First, similarity considerations are proposed to transform the governing system of partial differential equations and its boundary conditions into the corresponding dimensionless system. Then, the dimensionless new system is computed numerically in two steps: First neglecting shear force at the interface, so that the initial values of the boundary conditionsW _{xl, s} andW _{yl, s} are obtained. Then, the calculations of a problem of the three-point boundary-value for coupling the equations of liquid film with those of vapour film are carried out. Furthermore, the correlations for heat transfer coefficient and mass flow rate are proposed by analysis of heat and mass transfer and it is found that the heat transfer coefficient is function of dimensionless temperature gradient $\dot L$ , and that the condensate mass flow rate is function of the mass flow rate parameter (η _lδ W _{xl, s} ? 4W _{yl, s} )of liquid. In addition, the corresponding heat and mass transfer correlations expressed by subcooled temperature Δt are developed. According to Nusselt's theory four different assumptions are set up for an investigation of the effects of the film condensation of saturated vapour, so that the validity of Nusselt's theory can be further clarified. Quantitative comparisons from the results of the heat transfer coefficient and mass flow rate of the condensate indicate that the effect of variable thermophysical properties on the heat and mass transfer is appreciable. The effect of thermal convection in the condensate film is obviously larger than those of shear force at liquid-vapour interface, and the effect of the inertia in the condensate film is very small. Finally, it is also shown that Nusselt's theory, in using Drew reference temperature, will decrease the heat transfer coefficient by at most 5.11%, and will increase the mass flow rate of the condensate by at most 2.45%, provided that the effect of the surface tension is not taken into account.     

Transient conjugate heat transfer from a hemispherical plate during free liquid jet impingement on the convex surface

This paper considers the analysis of transient heating of a hemispherical solid plate of finite thickness during impingement of a free liquid jet. A constant heat flux was imposed at the inner surface of the hemispherical plate at t = 0 and heat transfer was monitored for the entire duration of the transient until a steady state condition was reached. Calculations were done for Reynolds number (Re) ranging from 500 to 1,500 and dimensionless plate thicknesses to nozzle diameter ratio (b/d _n) from 0.083 to 1.5. Results are presented for local and average Nusselt number using water as the coolant and various solid materials such as silicon, constantan, and copper. It was detected that increasing the Reynolds number decreases the time for the plate to achieve the steady-state condition. Also, a higher Reynolds number increases the Nusselt number. Hemispherical plate materials with higher thermal conductivity maintain lower temperature non-uniformity at the solid–fluid interface. Increasing the plate thickness decreases the maximum temperature in the solid and increases the time to reach the steady-state condition.