A NOVEL THEORY OF EFFECTIVE MECHANICAL PROPERTIES OF CLOSED-CELL FOAM MATERIALS

In this paper a new theory of effective mechanical properties of foam materials is proposed. A cell volume distribution coefficient is introduced to modify the original Gibson-Ashby equations of effective mechanical properties of foam materials. The constants that influence the effective modulus are replaced by the coeff~cient. Based on the modified distribution coefficient, the yield stress is also recalculated. Using X-ray microtomography, the internal structures of dif- ferent samples of polypropylene-nanoclay foam are obtained. The cell volume distributions of these samples are derived from the experiment by image analysis and the fitting curves are plot- ted. The distribution coefficient is acquired using the parameters from the theoretical model of the distribution curves. The results of the improved theory are compared with the experimental values and show good fitting quality. It was found that the precision of the improved theory is high and the cell volume distribution has an impact on the effective mechanical properties that would lead to the optimization of the synthesis procedure.     

弹性地基上含孔隙功能梯度材料板的自由振动和动力响应

为研究弹性地基上含孔隙的材料特性沿厚度呈Sigmoid函数变化的功能梯度材料(S-FGM)板的振动特性,本文基于改进的Voigt模型,分别建立了孔隙为均匀分布和非均匀分布两种类型的功能梯度材料的物性参数模型.根据复合材料薄板理论导出了弹性地基上含孔隙的功能梯度材料板的运动方程,用伽辽金法寻求四边简支边界条件下板自由振动...     

An efficient shear deformation theory for vibration of functionally graded plates

This paper presents an efficient shear deformation theory for vibration of functionally graded plates. The theory accounts for parabolic distribution of the transverse shear strains and satisfies the zero traction boundary conditions on the surfaces of the plate without using shear correction factors. The mechanical properties of functionally graded plate are assumed to vary according to a power law distribution of the volume fraction of the constituents. Equations of motion are derived from the Hamilton??s principle. Analytical solutions of natural frequency are obtained for simply supported plates. The accuracy of the present solutions is verified by comparing the obtained results with those predicted by classical theory, first-order shear deformation theory, and higher-order shear deformation theory. It can be concluded that the present theory is not only accurate but also simple in predicting the natural frequencies of functionally graded plates.     

A Shear-Corrected Formulation for the Sandwich Twist Specimen

The sandwich plate twist test method involves torsion loading of a panel by application of concentrated loads at two diagonally opposite corners and supporting the panel at the other two corners. Compliance measured in this test can be used to extract the shear moduli of monolithic, composite and sandwich plates, and it may also be employed for determination of the twist stiffness, D ₆₆ . Previous studies of the plate twist specimen have shown that classical laminated plate theory does not adequately predict the compliance of sandwich panels with a low density/modulus core, as a result of transverse shear deformation. This work proposes a “shear-corrected” model for accurate prediction of the plate twist compliance by incorporation of the transverse shear stiffnesses of the core. This model was used to extract the transverse shear modulus of a range of low density PVC foam cores from the measured panel twist compliance. Good agreement with published PVC foam core shear modulus values was obtained.     

具有填充材料的金属格栅夹层板在高速冲击下动态响应的数值分析

利用大型非线性有限元程序ABAQUS和LS-DYNA,对具有填充材料的金属格栅结构的冲击问题进行数值模拟.研究了不同的填充材料(金属泡沫和陶瓷)分别填充到不同的格栅构型(波纹型、蜂窝型和加强六边形)夹层板后,各类夹层板受到金属泡沫子弹和不锈钢子弹冲击时变形与能量吸收特性,探讨了夹层板上下面层板、支撑格栅及填充材料等各部分的吸能比率.研究结果表明,泡沫填充夹层板在缓冲吸能方面具有优势,陶瓷填充夹层板则在抵抗冲击穿透方面更具有优势,不同构型的夹层板,性能略有不同.     

Vibration of thick auxetic plates

This short communication investigates the effect of negative Poisson's ratio on the natural frequency of thick plates of arbitrary shape. Using the Mindlin plate theory, it was generally found that as the plate's Poisson's ratio becomes more negative, the Mindlin-to-Kirchhoff natural frequency ratio increases with decreasing rate. Upon comparing (a) the use of the simplified constant shear correction factor and the more accurate variable shear correction factor, (b) with and without rotary inertia, it was found that all the four combinations stated in (a) and (b) do not give appreciable difference when the Poisson's ratio of the plate is positive. However in the case of plates with negative Poisson's ratio, results reveal that when at least one of the simplifying assumptions is used, the Mindlin-to-Kirchhoff natural frequency ratio is overestimated, and that the overestimation further increases when both the simplifying assumptions are used. When benchmarked against Reddy plate theory, the use of variable shear correction factor has almost the same effect as the inclusion of rotary inertia. Hence the use of either variable shear correction factor or rotary inertia is proposed for modeling the vibrational frequencies of conventional and auxetic isotropic plates.     

Non-linear analysis of functionally graded plates in cylindrical bending under thermomechanical loadings based on a layerwise theory

A layerwise theory is used to analyze analytically displacements and stresses in functionally graded composite plates in cylindrical bending subjected to thermomechanical loadings. The plates are assumed to have isotropic, two-constituent material distribution through the thickness, and the modulus of elasticity of the plate is assumed to vary according to a power-law distribution in terms of the volume fractions of the constituents. The non-linear strain–displacement relations in the von Kármán sense are used to study the effect of geometric non-linearity. The equilibrium equations are solved exactly and also by using a perturbation technique. Numerical results are presented to show the effect of the material distribution on the deflections and stresses.     

Static and free vibration analysis of four-parameter continuous grading elliptical sandwich plates

In the present study, the static and dynamic analyses of elliptical functionally graded sandwich(FGS) plates are investigated. The constituent materials of the sandwich plates are ceramic and metal so that the core is made of pure metal, while the face sheets consist of a combination of metal and ceramic according to a four-parameter power-law distribution. Different material profiles such as classic, symmetric, and asymmetric can be obtained using the applied generalized power-law distribution ...     

A comprehensive analysis of functionally graded sandwich plates: Part 1—Deflection and stresses

A two-dimensional solution is presented for bending analysis of simply supported functionally graded ceramic–metal sandwich plates. The sandwich plate faces are assumed to have isotropic, two-constituent material distribution through the thickness, and the modulus of elasticity and Poisson’s ratio of the faces are assumed to vary according to a power-law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic ceramic material. Several kinds of sandwich plates are used taking into account the symmetry of the plate and the thickness of each layer. We derive field equations for functionally graded sandwich plates whose deformations are governed by either the shear deformation theories or the classical theory. Displacement functions that identically satisfy boundary conditions are used to reduce the governing equations to a set of coupled ordinary differential equations with variable coefficients. Numerical results of the sinusoidal, third-order, first-order and classical theories are presented to show the effect of material distribution on the deflections and stresses.     

Micromorphic continuum modelling of the deformation and fracture behaviour of nickel foams

An anisotropic compressible plasticity model is incorporated into the framework of the micromorphic continuum theory in order to describe some size effects observed in ductile nickel foams. This continuum model reproduces the fact that the presence of a machined hole in a foam plate does not affect its mechanical response when the hole size becomes comparable to the cell size of the material. Finite element simulations are compared to strain field measurements in nickel foam plates with a machined hole for different hole sizes, in order to identify the characteristic length of the model. Based on a simple ductile damage law, the model is then shown to be able to account for the strong anisotropy of the initiation of crack propagation in central crack panels made of nickel foams under mode I loading conditions.     

多孔金属夹层板在冲击载荷作用下的动态响应

借助两种有限元软件ABAQUS和LS_DYNA, 模拟和分析了两种厚度不同的泡沫铝合金夹层板(三明治板)、方孔蜂窝形夹层板和波纹形夹层板在冲击载荷下的动态响应. 4种夹层板的单位面积密度相同,冲击载荷分别用泡沫铝子弹与不锈钢子弹模拟. 讨论了泡沫金属夹层板和格构式夹层板在不同冲击载荷作用下的变形机制,重点在于对夹层板的吸能特性及板内各部分吸能变化规律的探讨.研究结果表明: 在泡沫子弹冲击下,夹层板主要是通过自身变形来消耗子弹动能,并转化为自身内能. 厚度为22\,mm的泡沫金属夹层板吸收能量最多,底面变形最小,是结构性能最优的夹层板;在刚性子弹高速冲击穿透过程中,格构式夹层板的吸能性能比单位面积密度相同的泡沫金属夹层板的吸能性能更好. 波纹形夹层板的能量吸收能力在4种板中最高.      

Two new refined shear displacement models for functionally graded sandwich plates

Two refined displacement models, RSDT1 and RSDT2, are developed for a bending analysis of functionally graded sandwich plates. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The developed models are variationally consistent, have strong similarity with classical plate theory in many aspects, do not require shear correction factor, and give rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress-free surface conditions. The accuracy of the analysis presented is demonstrated by comparing the results with solutions derived from other higher-order models. The functionally graded layers are assumed to have isotropic, two-constituent material distribution through the thickness, and the modulus of elasticity, Poisson’s ratio of the faces, and thermal expansion coefficients are assumed to vary according to a power-law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic ceramic material. Numerical results for deflections and stresses of functionally graded metal–ceramic plates are investigated. It can be concluded that the proposed models are accurate and simple in solving the bending behavior of functionally graded plates.     

VIBRATION ANALYSIS OF MICROSCALE PLATES BASED ON MODIFIED COUPLE STRESS THEORY

A non-classical Kirchhoff plate model is developed for the dynamic analysis of microscale plates based on the modified couple stress theory in which an internal material length scale parameter is included. Unlike the classical Kirchhoff plate model, the newly developed model can capture the size effect of microscale plates. Two boundary value problems of rectangular micro- plates are solved and the size effect on the lowest two natural frequencies is investigated. It is shown that the natural frequencies of the microscale plates predicted by the current model are size-dependent when the plate thickness is comparable to the material length scale parameter.     

碳纳米管增强型复合材料功能梯度板的自由振动模型与尺度效应

基于一种新的各向异性修正偶应力理论,建立了碳纳米管增强复合材料功能梯度板的自由振动模型。该模型能够描述尺度效应,且仅包含一个尺度参数。基于一阶剪切变形理论和哈密顿原理推演了板的运动微分方程,并以四边简支板为例给出了自振频率的解析解。讨论了板的几何尺寸、碳纳米管体分比含量和分布方式等因素对板的自振频率的影响。结果表明,本文模型所预测的板的自振基频总是高于经典弹性理论的Mindlin板模型的预测结果,两者间的差异在板的几何尺寸接近尺度参数的值时非常明显,且会随着板的几何尺寸的增大而逐渐消失。     

An efficient method for vibration and stability analysis of rectangular plates axially moving in fluid

An efficient method is developed to investigate the vibration and stability of moving plates immersed in fluid by applying the Kirchhoff plate theory and finite element method. The fluid is considered as an ideal fluid and is described with Bernoulli’s equation and the linear potential flow theory. Hamilton’s principle is used to acquire the dynamic equations of the immersed moving plate. The mass matrix, stiffness matrix,and gyroscopic inertia matrix are determined by the exact analytical integ...     

TWO KINDS OF SCALE EFFECTS OF VIBRATION CHARACTERISTICS OF NANO-PLATE1)

利用非局部应变梯度理论研究了纳米板横向自由振动特性。通过迭代法获得非局部应力的渐近表达式,利用哈密顿变分原理推导了纳米板的振动控制方程。针对四边简支边界条件,运用双重三角级数法给出了板固有频率的表达式,然后研究了非局部参数、材料特征参数、几何尺寸对纳米板自振频率的影响。数值结果表明：非局部效应会弱化纳米板的等效刚度,因而使板的固有频率降低,应变梯度效应则与之相反,两类效应仅在纳米尺度下对自振频率有显著影响;板几何尺寸的改变也会对其振动频率产生重要影响。     

A comprehensive analysis of functionally graded sandwich plates: Part 2—Buckling and free vibration

The sinusoidal shear deformation plate theory, presented in the first part of this paper, is used to study the buckling and free vibration of the simply supported functionally graded sandwich plate. Effects of rotatory inertia are considered. The critical buckling load and the vibration natural frequency are investigated. Some available results for sandwich plates non-symmetric about the mid-plane can be retrieved from the present analysis. The influences of the transverse shear deformation, plate aspect ratio, side-to-thickness ratio and volume fraction distributions are studied. In addition, the effect of the core thickness, relative to the total thickness of the plate, on the critical buckling load and the eigenfrequencies is investigated.     

热环境中旋转运动功能梯度圆板的强非线性固有振动

研究热环境中旋转运动功能梯度圆板的非线性固有振动问题．针对金属－陶瓷功能梯度圆板,考虑几何非线性、材料物理属性参数随温度变化以及材料组分沿厚度方向按幂律分布的情况,应用哈密顿原理推得热环境中旋转运动功能梯度圆板的非线性振动微分方程．考虑周边夹支边界条件,利用伽辽金法得到了横向非线性固有振动方程,并确定了静载荷引起的静挠度．用改进的多尺度法求解强非线性方程,得出非线性固有频率表达式．通过算例,分析了旋转运动功能梯度圆板固有频率随转速、温度等参量的变化情况．结果表明,非线性固有频率随金属含量的增加而降低;随转速和圆板厚度的增大而升高;随功能梯度圆板表面温度的升高而降低．     

An experimental study of the heat transfer in PS foam insulation

Heat transfer mechanisms in 14 samples of vacuum insulation panels (VIPs) are examined to reveal the influence of porous foam structure on VIP performance. The samples were produced by in-house equipment that was able to vary the foam structure by modulating the process temperature and pressure. Two parameters are proposed to describe the foam structure, namely, the broken cell ratio and the average cell size. Under a specific solid volume fraction, the average cell size shows a linear dependence on the broken cell ratio. Furthermore, the radiation and conduction heat transport data correlate well with these parameters. Radiation heat transfer increases as the broken cell ratio (cell size) increases, but solid conduction decreases as the broken cell ratio (cell size) increases. Consequently, an optimum broken cell ratio (cell size) exists such that the total heat transport is minimum under a specific solid volume fraction. However, the majority of VIP heat transfer is solid conduction. Solid conduction accounts for more than 80% of the total heat transport and is largely affected by the solid volume fraction. A rule of thumb for improving VIP performance is to reduce the solid volume fraction as much as possible to eliminate solid conduction, and maintain the cell size at an optimum value that is dependent on the solid volume fraction.     

Semi-analytical solution for three-dimensional vibration of thick continuous grading fiber reinforced (CGFR) annular plates on Pasternak elastic foundations with arbitrary boundary conditions on their circular edges

In this paper free vibration of continuous grading fiber reinforced (CGFR) annular plates on an elastic foundation, based on the three-dimensional theory of elasticity, for different boundary conditions at the circular edges is investigated. The foundation is described by the Pasternak or two-parameter model. The CGFR annular plates have an arbitrary variation of fiber volume fraction in the thickness direction. A semi-analytical approach composed of differential quadrature method (DQM) and series solution is adopted to solve the equations of motion. The fast rate of convergence of the method is demonstrated and comparison studies are carried out to establish its very high accuracy and versatility. Some new results for the natural frequencies of the plate are prepared, which include the effects of elastic coefficients of foundation, boundary conditions, material and geometrical parameters. Besides, results for CGFR plate with arbitrary variation of fiber volume fraction in the thickness direction of the plate are compared with discrete laminated composite plate. The main contribution of this work is to present useful results for continuous grading of fiber reinforcement in the thickness direction of a plate on an elastic foundation and comparison with similar discrete laminated composite plate. The interesting and new results show that non-dimensional natural frequency parameters of a functionally graded fiber volume fraction is larger than that of a discrete laminated and close to that of a 2-layer. The new results can be taken as the benchmark solutions for those from numerical methods and future researches.