Rapid and sensitive genotyping of dopamine D4 receptor tandem repeats by automated ultrathin-layer gel electrophoresis

Prior studies have revealed possible association between the presence of a seven repeat of the 48 bp variable number tandem repeat polymorphism of the human dopamine D4 receptor gene (DRD4) and some normal and pathological human traits, such as novelty seeking, hyperactivity disorders, and substance abuse. Some reports supported this finding whereas others did not. Incorrect genotyping could be one of the reasons for these controversial results, and might originate from preferential amplification of shorter polymerase chain reaction (PCR) products, resulting in the so-called allele dropout. In this paper we optimized the conditions for simultaneous amplification of shorter and longer amplicons of the 48 bp repeat region of the DRD4 gene in order to avoid the loss of the longer allele and consequent incorrect genotyping, using very low DNA template concentrations and partial replacement of 2'-deoxyguanosine-5'-triphosphate (dGTP) by 2'-deoxyinosine-5'-triphosphate (dITP). The optimized PCR method in combination with high throughput automated ultrathin-layer gel electrophoresis was suitable for rapid genotyping from less than a nanogram DNA using noninvasive sampling (buccal epithelial cells). All detected genotypes are presented, including such rear heterozygotes as the 2 x and 8 x 48 bp repeats in the same sample, showing the reliability of our novel detection method of longer alleles in the presence of shorter alleles.     

Analysis of dopamine D4 receptor gene polymorphism using microchip electrophoresis

A microfabricated electrophoresis device was used for rapid polymerase chain reaction product analysis in genotyping the dopamine D4 receptor gene (DRD4) 48 base pairs repeat polymorphism. An allelic ladder, prepared from homozygous individuals, was used as internal standard during the microchip electrophoresis based analysis. Comparison of this novel separation method with the conventional slab gel and previously reported ultra-thin-layer techniques confirmed the reliability of this new method. Genotyping of 332 healthy Hungarian individuals gave the following allele frequencies: two-repeat: 0.089; three-repeat: 0.026; four-repeat: 0.674; five-repeat: 0.011; six-repeat: 0.002; seven-repeat: 0.189; eight-repeat: 0.011. The genotype frequencies obtained showed no deviation from the Hardy-Weinberg equilibrium (p>0.903), further underlying the reliability of this new genotyping technique.     

Ultra-thin-layer agarose gel electrophoresis. I. Effect of the gel concentration and temperature on the separation of DNA fragments

A novel, rapid and efficient separation method is described for the analysis of double stranded (ds) DNA fragments in the form of horizontal ultra-thin-layer agarose gel electrophoresis. This separation technique combines the multilane, high-throughput separation format of agarose slab gel electrophoresis with the excellent performance of capillary electrophoresis. The electrophoretic separation of the fluorophore (Cy5)-labeled dsDNA molecules were imaged in real time by a scanning laser-induced fluorescence/avalanche photodiode detection system. Effects of the gel concentration (Ferguson plot) and separation temperature (Arrhenius plot) on the migration characteristics of the DNA fragments are discussed. An important genotyping application is also shown by characterizing the polymorphic region (2× or 4×48 base pair repeats) of the dopamine D₄ receptor gene (D₄DR, exon III region) for ten individuals, using PCR technology with Cy5-labeled primers and ultra-thin-layer agarose gel electrophoresis.     

Rapid authentication of ginseng species using microchip electrophoresis with laser-induced fluorescence detection

Ginseng is one of the most expensive Chinese herbal medicines and the effectiveness of ginseng depends strongly on its botanical sources and the use of different parts of the plants. In this study, a microchip electrophoresis method coupled with the polymerase chain reaction (PCR)–short tandem repeats (STR) technique was developed for rapid authentication of ginseng species. A low viscosity hydroxypropyl methylcellulose (HPMC) solution was used as the sieving matrix for separation of the amplified STR fragments. The allele sizing of the amplified PCR products could be detected within 240 s or less. Good reproducibility and accuracy of the fragment size were obtained with the relative standard deviation for the allele sizes less than 1.0% (n=11). At two microsatellite loci (CT 12, CA 33), American ginseng had a different allele pattern on the electropherograms compared with that of the Oriental ginseng. Moreover, cultivated and wild American ginseng can be distinguished on the basis of allele sizing. This work establishes the feasibility of fast genetic authentication of ginseng species by use of microchip electrophoresis.     

Rapid sizing of microsatellite alleles by gel electrophoresis on microfabricated channels: application to the D19S394 tetranucleotide repeat for cosegregation study of familial hypercholesterolemia.

This study evaluated the applicability of microchip electrophoresis to the sizing of microsatellites suitable to genetic, clinical and forensic applications. The evaluation was performed with the D19S394 tetranucleotide (AAAG) repeat characterized by a wide variation in the repeat number (1-17) and a short recombination distance from the low-density lipoprotein (LDL)-receptor gene that makes it suitable to cosegregation analysis of familial hypercholesterolemia (FH). The study was performed with 70 carriers of two LDL-receptor mutations common in northern Italy (i.e., the 4 bp insertion in exon 10 known as FH-Savona and the D200G missense mutation in the exon 4, known as FH-Padova 1) and 100 healthy controls. The polymerase chain reaction (PCR) amplification products prepared with a cosolvent PCR protocol and an antibody-protected polymerase were directly analyzed with an apparatus for high-voltage capillary electrophoresis on microchips and laser-induced fluorescence detection equipped with chips for the analysis of 25-500 bp dsDNA fragments. The test could not be extended to dinucleotide repeats due to the resolution characteristics of the available microchip. This novel approach was able to distinguish 17 microsatellite alleles varying from 0 to 17 repeats. Many of these alleles were quite rare, but the seven more abundant accounted for over the 70% of allele distribution in control population. The standard deviation in the sizing of the most abundant alleles ranged from +0.60 to +/- 0.75 bp. This indicated that the size attribution to a conventional allele using the +/- 1 bp range around it allowed a confidence limit above the 80 %. The sizing of D19S394 obtained this way allowed the cosegregation analysis with both the FH mutations tested. Therefore, this innovative approach to microsatellite sizing was much simpler, but equally effective as traditional capillary electrophoresis, at least with tetranucleotide repeats.     

Detection of errors in dinucleotide repeat typing by nondenaturing electrophoresis.

This study shows that consideration of minor bands (heteroduplex, shadow, and faint bands) associated with allele bands in nondenaturing polyacrylamide gel electrophoresis (PAGE) after polymerase chain reaction (PCR) is effective for detecting PCR processing errors that lead to mistyping of heterozygotes as homozygotes. Notably, we show that minor bands in native gels are highly effective for detecting allele dropout and preferential amplification in PCR amplification of dinucleotide repeats. These findings are based on an analysis of Mendelian inheritance patterns in families, and the reproduction of heterozygous band patterns by mixing homozygous DNAs before PCR, for a total of six (AC)n repeats located on human chromosome 11p15. To investigate the utility of our approach, a large population sample of 405 unrelated individuals was genotyped for each (AC)n repeat using minor bands as internal quality controls. Genotype frequencies at each of the six loci were in close agreement with Hardy-Weinberg proportions, which suggests that there were few genotyping errors. Our observations add to the evidence indicating that minor bands in native gels are of diagnostic value in the genotyping of dinucleotide repeats.     

Human dopamine D4 receptor allele genotyping by ultrathin agarose gel electrophoresis with To-Pro-3 complexation

Growing evidence shows the correlation between the allelic type of the dopamine D4 receptor and the human novelty-seeking personality trait. A sensitive, ultrathin agarose gel electrophoresis-based, high-throughput screening method was developed for genotyping the dopamine D4 receptor (D4DR) exon III 48 base pair repeat polymorphism. The efficiency of the method was increased by reamplification nested polymerase chain reaction (PCR) - of the 48 base pair repeat containing the PCR product with internal primers. The nested PCR fragments were analyzed by ultrathin layer agarose gel electrophoresis with an automated real-time laser-induced fluorescent detection system. Noncovalent affinity complexation was accomplished during the separation process by the addition of a very low concentration of intercalation dye, To-Pro-3 (2 nM) to the gel buffer system. This resulted in instant fluorescent labeling of the migrating PCR fragments. This method can readily facilitate genetic association studies between dopamine receptor genotypes and some human behavioral and neuropsychiatric disorders.     

Genotyping the -6A/G functional polymorphism in the core promoter region of angiotensinogen gene by microchip electrophoresis

Angiotensinogen (AGT) gene has been regarded as one of the candidate genes for essential hypertension. In our study, the role of AGT gene as a putatively predisposing gene for hypertension was evaluated by genotyping a A (-6) G polymorphism in the core promoter region in 123 patients with essential hypertension and 103 healthy controls. A microchip electrophoresis method coupled with polymorphism chain reaction (PCR)-restriction fragment length polymorphism (RFLP) assay was used for genotyping the A (-6) G single-nucleotide polymorphism. The separation and detection of the digested PCR amplicons were completed just in 280 s or less. The genotype frequency fulfilled the criteria of the Hardy-Weinbery equilibrium (X2 = 3.067, P > 0.05). The results showed a higher frequency of the -6 A allele (0.70) in the normotensive subjects, which is higher than those reported in Germany (0.47) and Czech (0.40) populations, but similar to that found in Japanese populations (0.73). The frequencies of genotype AA, AG, and GG were 0.46, 0.49, and 0.05 in hypertensive subjects, and 0.44, 0.53, and 0.03 in control subjects. There is no significant difference in the distributions of the genotype and allele between the two groups (X2 = 0.88, P > 0.05; X2 = 0.024, P > 0.05). These findings differ from some of the results obtained in other ethnic groups, indicating the potential importance of ethnic origin in the assessment of genetic risk identifiers for a complex disease.     

Characterization of a highly variable short tandem repeat polymorphism at the D2S1242 locus

We report the evaluation of short tandem repeat (STR) locus D2S1242 (GDB ID G00-309-429) for forensic purposes, investigated by polymerase chain reaction (PCR) amplification and both native and denaturating polyacrylamide gel electrophoresis in 147 unrelated Austrians. No deviations from Hardy-Weinberg expectations were observed. The mean exclusion chance (MEC) was 0.669, the discriminating power (DP) was 0.947, and the observed heterozygosity rate was 0.856. An allelic ladder consisting of eight sequenced alleles (141-167 and 175 bp) was constructed. Sequence analysis revealed that the locus comprised two repeat motifs varying in number between alleles GAAA and GAAG. According to the number of tetranucleotide repeats the smallest allele was designated as 10 and the largest allele as 18.     

High-throughput genotyping of factor V Leiden mutation by ultrathin-layer agarose gel electrophoresis.

Ultrathin-layer agarose gel electrophoresis is a novel combination of the established methodologies of slab gel electrophoresis and capillary gel electrophoresis. This new format provides a multilane separation platform with rapid analysis time and excellent sensitivity by using laser-induced fluorescence scanning detection system. Sample injection onto the ultrathin-layer separation platform is easily accomplished by membrane mediated loading technology. In this paper, we demonstrate the sensitivity and high-throughput fashion of this novel separation and detection system for rapid genotyping of the coagulation factor V Leiden mutation by polymerase chain reaction (PCR)-restriction fragment length polymorphism (RFLP) analysis. The PCR amplified fragment from exon 10 of the factor V gene was digested by the Mnl I restriction enzyme, followed by automated ultrathin-layer agarose gel electrophoresis analysis with "in migratio" fluorescent labeling during the separation process. Due to its speed and automation, this method should be considered for large scale screening of factor V Leiden mutation.     

Multiplex agarose gel electrophoresis system for variable number of tandem repeats genotyping: Analysis example using Mycobacterium tuberculosis

As one genotyping method for Mycobacterium tuberculosis, variable number of tandem repeats (VNTR) is a promising tool to trace the undefined transmission of tuberculosis, but it often requires large equipment such as a genetic analyzer for DNA fragment analysis or CE system to conduct systematic analyses. For convenient genotyping at low cost in laboratories, we designed a multiplex PCR system that is applicable to agarose gel electrophoresis using fluorescent PCR primers. For tuberculosis genotyping by VNTR, the copy quantities of minisatellite DNA must be determined in more than 12 loci. The system can halve laborious electrophoresis processes by presenting an image of two VNTR amplicons on a single lane. No expensive equipment is necessary for this method. Therefore, it is useful even in developing countries.     

Application of electrophoresis technology to DNA analysis

We used the variable number tandem repeat (VNTR) polymorphism and the ten short tandem repeat (STR) polymorphisms to study a number of disputed paternity cases in the Japanese population. For the determination of VNTR locus (D1S80) and the ten STR loci (vWA, F13B, TH01, TPOX, CSF1PO, F13A01, LPL, D3S1744, D12S1090, D18S849) we used polymerase chain reaction (PCR) amplification and the vertical polyacrylamide gel electrophoresis technique followed by SYBR green I staining. The irregular repeats were analyzed by sequencing from bands of vertical polyacrylamide gel electrophoresis using the latest gene analyzing equipment, the ABI PRISM 310 Genetic Analyzer. The probable genotypes of the deceased putative father were deduced by Komatu's method from the genotypes of the widow and the genotypes of their children. The calculation of paternity probability used the Essen-Moller formula and Bayes's theorem. Calculated in eleven loci, the distinguishing probabilities (DP) and the mean exclusion chance (MEC) were 0.9999 and 0.9989, respectively. Therefore, information obtained from eleven DNA polymorphisms is enough to determine paternity plausibility.     

Analysis of multiplex PCR fragments with PMMA microchip

Microchip electrophoresis is a promising technique for analysis of bio-molecules. It has the advantages of fast analysis, high sensitivity, high resolution and low-cost of samples. Plastic chip has the potential of mass production for clinical use for its advantages in biocompatibility and low cost. In this work, the method for fabrication of poly(methyl methacrylate) (PMMA) chip was described, and conditions for DNA separation were investigated with the chip. The PMMA microchip was used for detection of multiplex PCR products of 18 and 36 cases with SARS and hepatitis B virus infection under optimized separation conditions. Microchip electrophoresis showed higher sensitivity, higher resolution and less time consumption when compared with gel electrophoresis. The microchip electrophoresis with PMMA chip provided a rapid, sensitive and reliable method for analysis of multiplex PCR products.     

Fast separation of oligonucleotide and triplet repeat DNA on a microfabricated capillary electrophoresis device and capillary electrophoresis

A laser-induced fluorescence detection system coupled with a highly sensitive silicon-intensified target (SIT) camera is successfully applied to the imaging of a band for DNA fragment labeling by fluorescence dye in a microchannel, and to the visualizing of the separation process on a microfabricated chip. We demonstrated that an only 6 mm separation channel is sufficient for the separation of triplet repeat DNA fragment and DNA molecular marker within only 12 s. The separation using the microfabricated capillary electrophoresis device is confirmed to be at least 18 times faster than the same separation carried out by conventional capillary electrophoresis with 24.5 cm effective length. The use of a short capillary with 8.5 cm effective length is also efficient for fast separation of DNA; however, the microchip technology is even faster than capillary electrophoresis using a short capillary.     

Precision and accuracy in fluorescent short tandem repeat DNA typing: assessment of benefits imparted by the use of allelic ladders with the AmpF/STR Profiler Plus kit

Base-calling precision of short tandem repeat (STR) allelic bands on dynamic slab-gel electrophoresis systems was evaluated. Data was collected from over 6000 population database allele peaks generated from 468 population database samples amplified with the AmpF/STR Profiler Plus (PP) kit and electrophoresed on ABD 377 DNA sequencers. Precision was measured by way of standard deviations and was shown to be essentially the same, whether using fixed or floating bin genotyping. However, the allelic ladders have proven more sensitive to electrophoretic variations than database samples, which have caused some floating bins of D18S51 to shift on occasion. This observation prompted the investigation of polyacrylamide gel formulations in order to stabilize allelic ladder migration. The results demonstrate that, although alleles comprised in allelic ladders and questioned samples run on the same gel should migrate in an identical manner, this premise needs to be verified for any given electrophoresis platform and gel formulation. We show that the compilation of base-calling data is a very informative and useful tool for assessing the performance stability of dynamic gel electrophoresis systems, stability on which depends genotyping result quality.     

High-sensitivity capillary gel electrophoretic analysis of DNA fragments on an electrophoresis microchip using electrokinetic injection with transient isotachophoretic preconcentration

The research adopted a single-channel microchip as the probe, and focused electrokinetic injection combined with transient isotachophoresis preconcentration technique on capillary electrophoresis microchip to improve the analytical sensitivity of DNA fragments. The channel length, channel width and channel depth of the used microchip were 40.5 mm, and 110 and 50 μm, respectively. The separation was detected by CCD (charge-coupled device) (effective LENGTH=25 mm, 260 nm). A 1/100 diluted sample (0.2 mg/l of each DNA fragment) of commercially available stepladder DNA sample could be baseline separated in 120 s with S/N=2–5. Compared with conventional chip gel electrophoresis, the proposed method is ideally suited to improve the sensitivity of DNA analysis by chip electrophoresis.     

Plastic microchip electrophoresis for genetic screening: the analysis of polymerase chain reactions products of fragile X (CGG)n alleles

Clinical screening of abnormal chromosomes associated with fragile X syndrome (FXS) demands a high-throughput method including DNA sizing and detection of the amplified products. This study is to explore the use of polymer microchip electrophoresis for the analysis of polymerase chain reaction (PCR) products of fragile X (CGG)n alleles to facilitate a fast exclusion test of FXS. The sequences flanking the CGG-repeat of FMR1 gene was amplified by betaine-PCR and the amplified products were desalted and then analyzed by microchips which were fabricated on poly(methyl methacrylate) (PMMA) substrate. The PCR bands with more than six CGG-repeats in difference could be clearly distinguished in less than 3 min by microchip electrophoresis with a separation length of 6 cm. It was found that the signal was greatly enhanced with the use of both covalent (Cy5) and intercalating dye (TORRO-3), which has never been demonstrated before. We tested the method by reanalysis of twelve samples from males and six samples from females. For female samples with less than six repeat differences, Southern blotting method was performed to confirm or exclude the findings from microchips. It was found that the test results from all male and female samples show a 100% correlation between the microchip electrophoresis and the existing methods.     

Genotyping the -521C/T functional polymorphism in the promoter region of dopamine D4 receptor (DRD4) gene

The -521C/Tsingle nucleotide polymorphism (SNP) in the promoter region of the dopamine D4 receptor gene (DRD4) has recently been detected in oriental (Japanese) individuals and related to novelty seeking and schizophrenia. Here, we report the analysis of the -521C/T polymorphism in a Caucasian (Hungarian) population using two independent genotyping methods. The polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) procedure utilized the Fspl restriction site around the -521 position. An additional, nonpolymorphic cleavage site was also included into the amplified region to serve as an internal standard for verifying the completion of the digestion. As another independent method, a tetraprimer system for single-tube allele-specific PCR (SAS-PCR) was developed to generate -521C and -521T specific PCR products with different fragment sizes. Consequently, genotyping with SAS-PCR is based on the gel-electrophoretic separation of the allele-specific double-stranded DNA (dsDNA) fragments. 119 healthy Hungarian individuals were genotyped for -521C/T polymorphism of the dopamine D4 promoter region, using both methods. Similar allele frequencies were found (-521C allele: 0.43; -521T allele: 0.57) as reported earlier for the Japanese population.     

微流控芯片快速鉴定黄山松DNA多态性片段

黄山松是中国山区特有的优质针叶松,有关其遗传图谱的建立一直受到人们的关注,然而迄今为止,运用分子标记法来建立其遗传图谱尚未见报道．随机引物扩增DNA多态性标记(简称RAPD)可快速提供联锁信息,尤其适用于建立针叶树类的基因图谱,通常采用平板凝胶电泳对多态性的     

Microchip Electrophoretic Analysis of Phaseolin Patterns and Its Comparison with Currently Used SDS-PAGE Techniques

The goal of this work was to compare reproducibility of phaseolin patterns of common bean obtained by two electrophoretic protein separation techniques including the conventional SDS-PAGE and an automated chip electrophoresis system. Five standard cultivars of common bean provided by the United States Department of Agriculture (Beltsville, Maryland) that represented five phaseolin types, T (Tendergreen), C (Contender) and S (Sanilac), B (Boyaca) and P (Pampa), were used in this study. Comparison of the phaseolin patterns revealed that the chip-on-a-lab electrophoresis provided a good reproducibility. The phaseolin polymorphism included four to seven polypeptides typical for the pattern composition of the T, C and S types. The polymorphism of the B and P patterns was also established. Phaseolin polypeptides separated by the microchip electrophoresis exhibited differences with respect to the molecular weights and electrophoretic mobility as compared to the SDS-PAGE technique. This phenomenon could be attributed to the absence of a solid separation phase in the microchip electrophoresis. Moreover, this technique has potential to substantially accelerate screening of large bean germplasm collections since it allows for the accurate analysis of the higher number of individual plants within accessions than the conventional, tedious and time consuming SDS-PAGE method.