氮掺杂石墨烯负载的硫化镉空心球纳米复合材料的光催化性能

通过无模板法一步合成了一种新型N掺杂石墨烯负载的CdS空心球复合材料. 采用X射线衍射、透射电镜、红外光谱、紫外-可见光谱、N₂吸附-脱附、荧光光谱和X射线光电子能谱等技术对该材料进行了表征, 并在可见光照射下测试了其在降解亚甲基蓝和水杨酸中的光催化性能. 结果表明, 相对于氧化石墨烯负载硫化镉空心球和单独的硫化镉空心球, 氮掺杂石墨烯负载的硫化镉空心球具有更高的光催化活性和稳定性. 这是由于氮掺杂的石墨烯能充当优异的电子受体和传输体, 从而抑制了载流子的复合. 另外发现, 羟基自由基是可见光下降解亚甲基蓝的主要活性物种.     

A facile route to hollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via inverse miniemulsion polymerization

In this article, we report a facile route to the preparation of hollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via inverse miniemulsion polymerization at room temperature and under ambient pressure. Water droplets act as a soft template for the formation of hollow structure. Meanwhile, the existence of amphipathic magnetite nanoparticles (MPs) which can assemble at the interface of W/O is favorable to the interfacial polymerization of styrene, ensuring the formation of hollow nanocomposite microspheres. The final products were thoroughly characterized by X‐ray powder diffraction (XRD), fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), field‐emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), and X‐ray photoelectron spectroscopy (XPS), which showed the formation of hollow magnetite/polystyrene nanocomposite microspheres. Magnetic hysteresis loop measurements revealed that both MPs and hollow nanocomposite microspheres displayed superparamagnetism. The effects of the content of H₂O, sorbitan monooleate (Span 80) and styrene and the dose rate on the morphology of nanocomposite microspheres were studied. Furthermore, the mechanism of the formation of the hollow magnetic microspheres was also discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3900–3910, 2008     

Novel route for synthesizing hyperbranched polyamine

A novel route for the synthesis of hyperbranched polyamine containing imidazolidine rings was developed, proceeding by the step‐growth polymerization of acrolein with ethylene diamine. The reaction kinetics and polymerization mechanism were studied with NMR and ultraviolet–visible spectroscopy. The influence of the reaction temperature and the concentration and feed ratio of the reactants on the structural characteristics of the obtained products was investigated. To obtain stable hyperbranched polyamines as analogues of hyperbranched poly(ethylene imine) or dendrimeric poly(propylene imine), sodium borohydride was used to reduce the synthesized hyperbranched polyamines to open the imidazolidine rings. The molecular weights, degrees of branching, and glass‐transition temperatures of the hyperbranched polyamines before and after reduction were compared. The polymerization behaviors of acrolein with other amines such as ethanol amine, propylene diamine, and 1,6‐hexane diamine were also investigated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 699–708, 2007     

Synthesis and antibacterial property of hollow SiO2/Ag nanocomposite spheres

This paper presents a novel and facile method to fabricate hollow silica/sliver (SiO(2)/Ag) nanocomposite spheres. In this approach, the monodisperse hollow SiO(2) colloids bearing quantenary ammonium groups were prepared by dispersion polymerization combined sol-gel process and used as templates. The Ag(+) ions were first adsorbed onto the surfaces of the hollow SiO(2) beads via electrostatic interaction and then in situ reduced by the deprotonated silanol groups of the hollow SiO(2) beads, no extra reducing agents or catalysts were added during the reduction process. TEM, SEM and EDX analyses indicated that Ag nanoparticles were successfully deposited onto the surfaces of hollow SiO(2) beads. Some influencing parameters, such as the amount of quantenary ammonium groups in the inner wall of hollow SiO(2) colloids, Ag(+) ions concentration and reaction temperature, on the deposition of Ag nanoparticles onto SiO(2) colloids were investigated. Preliminary antibacterial tests indicated that these hollow nanocomposite spheres showed excellent antibacterial ability.     

A microemulsion-template-interfacial-reaction route to copper sulfide hollow spheres

CuS hollow spheres have been successfully synthesized through a facile microemulsion-template-interfacial-reaction route using copper naphthenate as metal precursor and thioacetamide as the source of S(2-). In this way, hollow spheres could be obtained directly since the reaction of two reactants respectively dissolved in two different phases of an oil-in-water (o/w) microemulsion only occurs at the oil/water interface. Therefore, it is a key for forming hollow spheres to optimize the interfacial reaction rate by controlling reaction conditions. Furthermore, the size of the hollow spheres can be tailored by changing the content of oil phase. In this study, the average diameter of the CuS hollow spheres can be adjusted from 110 to 280 nm by changing the content of oil phase from 0.5 ml to 1.5 ml. In addition, the reaction temperature is a very important factor for forming CuS hollow spheres and the appropriate reaction temperature is about 50 °C.     

Fabrication of polystyrene/upconversion nanocrystals nanocomposite spheres through in situ dispersion polymerization

This paper presents a feasible and efficacious procedure to synthesize polystyrene/upconversion nanocrystals (PS/UCNCs) nanocomposite spheres with raspberry-like structure via an in situ dispersion polymerization technique. During this process, polyacrylic acid (PAA) as stabilizer plays the key role in adsorbing UCNCs, including NaYF(4):Yb(3+)-Er(3+), NaYF(4):Yb(3+)-Tm(3+) and NaYF(4):Yb(3+)-Ho(3+) onto the PS surfaces. TEM and SEM images confirmed the raspberry-like morphology of the obtained nanocomposite spheres. The effect of synthetic conditions, for instances, PAA amount, type and concentration of UCNCs on the structure and fluorescence of the PS/UCNCs nanocomposite spheres were studied in detail.     

Easy method for preparing nanocrystalline CdS hollow spheres using miniemulsion droplets as templates

CdS hollow spheres with well-controlled morphology and uniform size were successfully prepared using a miniemulsion technique, in which miniemulsion droplets of isooctane prepared with dodecylmercaptane as a co-stabilizer were employed as templates. The SH groups of dodecylmercaptane generated S(-) ions under alkaline conditions, and further reacted with Cd(2+) ions to form cadmium thiolate around the droplets. The cadmium thiolate then reacted with S(2-) ions, stemming from Na(2)S9H(2)O, to directly form CdS hollow spheres owing to the evaporation of isooctane during the reaction and/or the subsequent drying process. No additional dissolution, calcination or additional surface modification of the templates was needed. The size of the hollow spheres could be tuned by altering the molar ratio of the anionic and non-ionic surfactants, while their shell thickness could be adjusted by changing the amount of co-stabilizer.     

Titanium compounds as coatings on polystyrene latices and as hollow spheres

Sub-micron-sized anionic polystyrene latices have been coated with uniform layers of amorphous titanium dioxide by hydrolysis of titanium tetrabutoxide in ethanolic solutions containing the polymer cores. The thickness of the coating layer could be altered by adjusting the concentration of titanium tetrabutoxide and the amount of polymer latex added to the system. Hollow colloidal spheres of crystal titanium dioxide were obtained by calcination of the so-coated polystyrene latices at an elevated temperature. Received: 29 July 1999/Accepted in revised form: 15 October 1999     

A spontaneous combustion reaction for synthesizing Pt hollow capsules using colloidal carbon spheres as templates

Here we report a spontaneous combustion reaction in synthesizing Pt hollow capsules. In brief, Pt nanoparticles were loaded on the surface of colloidal carbon spheres by wet-chemical impregnation. When Pt-loaded carbon spheres were taken out of an argon-filled tube furnace at room temperature and exposed to air, they underwent spontaneous combustion. The internal carbon spheres templates were removed to leave nanostructured Pt hollow capsules. There are at least two critical conditions for the occurrence of the spontaneous combustion: the Pt particle size is below 5.8 nm, and the hydrogen content in the carbon spheres is above 2.570 wt %. Such a reaction is interesting for the preparation of metal hollow spheres and is also relevant with respect to removal of accumulated carbon on catalysts and for soot oxidation at room temperature.     

Mild, quasireverse emulsion route to submicrometer lithium niobate hollow spheres

A water/ethylene glycol (H2O/EG) system has been designed to synthesize lithium niobate (LiNbO3) powders by a mild, one-step quasireverse emulsion method. A morphology transformation from initial nuclei to flowerlike structures and then to hollow spheres is confirmed by the time-dependent experiment. The as-obtained LiNbO3 hollow spheres are formed via Ostwald ripening under solvothermal conditions, and their absorption edge in UV/vis diffuse reflectance spectra can be effectively tuned by the current morphology control strategies. This facile, efficient, and economic work provides a new route to simply and mildly synthesize hollow LiNbO3 particles and is a good initiation in the morphology control study of LiNbO3 powders.     

Facile route to Zn-based II-VI semiconductor spheres, hollow spheres, and core/shell nanocrystals and their optical properties

A convenient chemical conversion method that allows the direct preparation of nanocrystalline ZnE (E = O, S, Se) semiconductor spheres and hollow spheres as well as their core/shell structures is reported. By using monodisperse ZnO nanospheres as a starting reactant and in situ template, ZnS, ZnSe solid and hollow nanospheres, and ZnO/ZnS and ZnO/ZnSe core/shell nanostructures have been obtained through an ultrasound-assisted solution-phase conversion process. The formation mechanism of these nanocrystals is connected with the sonochemical effect of ultrasound irradiation. The photoluminescence and electrogenerated chemiluminescence properties of the as-prepared nanocrystals were investigated.     

A facile one-step route to synthesize titania hollow microspheres with incontinuous multicavities

The titania hollow microspheres with incontinuous multicavities were successfully fabricated via an oil/ water(O/W) emulsion process accompanied by sol–gel reaction in the presence of polyvinylpyrrolidone(PVP). In the one-step route, the addition of PVP to the tetrabutyl titanate(TBT) 1-octanol solution as the oil phase of the O/W emulsion clearly expands the size of the cavities inside the microspheres. The and atoleine alters the polarity of the oil phase to affect the interior structure significantly. The Span 80 is used as a stabilizer to preserve spherical shape. A preliminary mechanism based on phaseseparation for the structural evolution of titania hollow microspheres with multicavities is suggested. Zirconia and alumina hollow microspheres with incontinuous multicavities can also be prepared by this one-step route successfully.     

Novel and facile method for the preparation of monodispersed titania hollow spheres

The fabrication of monodispersed hollow spheres in varying sizes and shapes is very interesting and has a lot of potential applications. This paper provides a very simple route to preparing hollow titania spheres using polystyrene (PS) as a template. In this approach, the titania shells were first formed and the PS cores were dissolved subsequently, even synchronously, in the same medium; neither an additional dissolution nor a calcination process was needed to remove the PS cores. Transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and Barret-Emmet-Teller measurements were used to characterize the monodispersed hollow titania spheres. A possible formation mechanism of the hollow spheres was proposed.     

Hematite nanoparticles as polystyrene microsphere coatings and hollow spheres: preparation and characterization

A novel method of fabricating composite particles with core–shell structures is demonstrated. The particles comprised monodisperse submicrometer-sized copolymer latex spheres as cores and Fe₂O₃ crystallites as shells. The shell was formed by controlled hydrolysis of aqueous iron solutions, and the growth of hematite on the surface of the copolymer spheres was controlled by slow injection. Hollow spheres were obtained by calcinations of the so-coated copolymer lattices at 500°C in air. The void size of these hollow spheres was determined by the diameter of the copolymer template, and the wall thickness could be easily controlled in the range of 20–60 nm by using this coating process. The structure and the composition of the spheres were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). It can be seen that a crystallite change and a crystal phase transformation occurred during coating and calcination of the composite spheres. The formation of the composite particles is simply explained by the nucleation of iron oxide on the surface of the latex followed by growth of the iron compound shell.     

Study on Fe3O4/polyaniline electromagnetic composite hollow spheres prepared against sulfonated polystyrene colloid template

Fe₃O₄/polyaniline (PANI) composite hollow spheres were prepared by using sulfonated polystyrene (SPS) microspheres as templates. The sulfonic acid groups were applied to induce absorbing Fe₃O₄ nanoparticle, and subsequently, conductive PANI was grown. Finally, the polystyrene cores were selectively dissolved to yield composite hollow microspheres with electromagnetic properties. The analysis results indicated that the adsorption of Fe₃O₄ on template core by electrostatic interaction resulted in magnetic composite microspheres. The conductivity of composite hollow spheres was remarkably increased after polyvinylpyrrolidone modification which favored the growth of PANI on SPS/Fe₃O₄ and enhanced the integrity of hollow microspheres. The saturated magnetization of the composite hollow microspheres was tuned from 2.7 to 9.1 emu/g, and the conductivity was in the range from 10^?2 to 10⁰?S/cm.     

Controllable synthesis of functionalized CdS nanocrystals and CdS/PMMA nanocomposite hybrids

We reported controllable synthesis of CdS nanocrystal-polymer transparent hybrids by using polymethylmethacrylate (PMMA) as a polymer matrix. In a typical run, the appropriate amounts of cadmium chloride (CdCl₂) and sodium sulfide (Na₂S) in the presence of 2-mercaptoethanol (ME) as the organic ligand are well dispersed in H₂O/DMF solution without any aggregation. From a combination of transmission electron microscopy (TEM) and a computing method of Brus’s model according UV-vis absorption spectra, the particle size of as-prepared hydroxyl-coated CdS nanocrystal was determined to be about 5 nm. Then, with the surface treatment with methacryloxypropyltrimethoxysilane (MPS), CdS-PMMA hybrids were obtained via free radical polymerization in situ. FT-IR characterization indicates the formation of robust bonding between CdS nanocrystals and the organic ligand and the formation of double-bond functional CdS nanocrystals. The TGA measurement displays CdS-PMMA hybrids possess better thermal stability compared with pure PMMA polymer. The fluorescence measurement shows that CdS nanocrystals and CdS-PMMA hybrids exhibit good optical properties. Also, the luminescent photographs taken under ultraviolet light prove the luminescence properties.     

Synthesis of high quality inorganic fullerene-like BN hollow spheres via a simple chemical route

High quality inorganic fullerene-like boron nitride hollow spheres (100-200 nm) have been successfully synthesized via a simple chemical route with a 30-40% yield of BN hollow spheres.     

A facile interfacial reaction route to prepare magnetic hollow spheres with tunable shell thickness

Magnetic Fe3O4 hollow spheres were successfully synthesized with a water in oil in water (W/O/W) emulsion. During the facile procedure, no high pressure, high temperature, or other complex reaction conditions were required. Transmission electric microscope (TEM) images showed that all the hollow structural products have a good spherical morphology with an average diameter of 160 nm. The average size and the size distribution were further determined with dynamic light scattering (DLS), which reveals that the hollow nanospheres have a narrow size distribution. The average size from DLS was about 180 nm, which approximated that from TEM data. X-ray diffraction (XRD) demonstrates that the products were all Fe3O4 phase without any impurity. By increasing or decreasing the dosage of precipitate and precipitant sources, we controlled the shell thickness successfully in the tens of nanometers range. The formation mechanism of those hollow magnetic nanospheres was discussed by using the "reverse micelle transport" mechanism.