端基炔烃的简单快速二聚反应

端基炔烃在无钯催化剂的条件下, 以乙腈为溶剂, 三乙胺为碱, 与氯化亚铜和二醋酸碘苯反应, 常温下短时间内得到高产率的二聚产物, 提供了一个简单快速合成共轭二炔烃的新方法. 比较了反应条件, 并提出了可能的反应机理.     

丙烯腈催化二聚反应的研究进展

丙烯腈是廉价易得的化工原料.丙烯腈的线性二聚可以构建己(烯)二腈分子骨架,经过进一步的加氢还原可制备己二胺.己二胺是重要的工业中间体,有着广泛的用途和广阔的市场,主要用于合成尼龙66.因此,丙烯腈的线性二聚是非常重要的有机化学反应.与已经实现工业化的电解法相比,催化二聚有着能耗低、装置要求低等优点.除此之外,丙烯腈催化二聚还可能生成非线性聚合产物2-亚甲基戊二腈.它是生产广谱抗菌剂溴菌腈的重要中间体.溴菌腈的市场需求量虽然不如尼龙66巨大,但也是重要的化工产品之一.然而,在丙烯腈的催化二聚领域,至今未有系统性的综述报导.对丙烯腈催化二聚反应的研究进展进行整理与系统性地阐述,按照催化剂种类,主要分为钌催化、其它金属催化以及膦催化二聚等三部分,供国内相关领域技术人员参考.     

酸性分子筛催化乙烯二聚反应

应用密度泛函理论(DFT), 采用5T簇模型来模拟分子筛催化剂的酸性位, 在B3LYP/6-311+G(3df, 2p)的条件下通过理论计算研究了乙烯在酸性分子筛上的二聚反应. 对反应各驻点进行了全局优化, 经过零点能校正后, 计算得出乙烯二聚反应的活化能. 研究表明, 乙烯在分子筛上的二聚反应分三步进行: 单个乙烯分子化学吸附→第二个乙烯分子的物理吸附→两乙烯分子二聚反应. 乙烯化学吸附生成的烷氧化合物与物理吸附的乙烯分子发生二聚反应生成新的C—C键同时生成新的烷氧化合物. 计算得到的乙烯化学吸附和二聚反应的反应能垒分别为108和149 kJ·mol-1. 反应的逆过程也就是1-丁烯在酸性分子筛表面的1-丁基烷氧化合物发生β分裂反应, 计算所得相应的1-丁烯β分裂反应的能垒为217 kJ·mol-1, 远高于相应的乙烯二聚反应能垒. 此外还进一步研究了所用基组对计算结果的影响.     

硬脂酸镉分子在乙醇溶液中的二维螯聚反应

在乙醇中 ,硬脂酸根与二价镉离子反应生成一种新的硬脂酸镉晶体 ,对其进行了微分扫描量热 (DSC)、红外 (IR)、X -光衍射 (XRD)、紫外 -可见扩散反射 (DRS)等项分析 ,结果表明 :在乙醇中硬脂酸镉发生二维螯聚反应。     

末端炔烃二聚反应合成共轭烯炔的研究进展

综述了不同催化体系催化末端炔烃二聚反应合成共轭烯炔化合物的研究进展. 其中催化体系主要包括过渡金属配合物、镧系和锕系金属配合物、第三主族元素配合物以及有机催化剂. 实验结果表明: 不同催化体系对末端炔烃二聚反应的选择性控制有影响, 尤其是区域选择性(头-头二聚或头-尾二聚).     

杂多化合物催化异丁烯氧化反应(英文)

The compositions and structures of heteropoly compounds as well as their catalytic behaviors for the isobutene partial oxidation have been studied by means of flow reactor, XRD, IR and DTA. It is found that the heteropoly compounds of PMo12As0.6Cu0.1Ox with appropriate quantities of K and V display good catalytic performances for one-step process of isobutene oxidation to methacrylic acid. Through modulating the compositions of catalysts and optimizing the reaction conditions, a yield of 67. 1% for methacrylic acid and methacrolein was obtained.     

二杂芳基乙烯光二聚反应与二聚体的晶体结构

通过反-1,2-双(2-苯并唑基)乙烯(BBE)和反-1-(2-苯并咪唑基)-2-(2-苯并唑基)乙烯(BME)的光二聚反应合成了r-1,c-2,t-3,t-4-四(2-苯并唑基)环丁烷(BBC)和r-1,c-2,t-3,t-4-1,3-双(2-苯并咪唑基)-2,4-双(2-苯并唑基)环丁烷(BMC).用元素分析、红外、紫外、核磁共振谱、质谱及X射线衍射表征了二聚体的结构.BBC晶体属三斜晶系,空间群为P1.晶胞参数:a=0.64684(13)nm,b=1.3242(3)nm,c=1.6245(3)nm;α=74.66(3)°,β=78.77(3)°,γ=76.06(3)°,Z=2.BBC晶胞中分子有两种取向,两种取向不同分子的苯并唑平面间存在着π-堆积现象.π-堆积面间的距离在0.330～0.376nm之间,与石墨晶体中分子平面片层间的距离非常接近.BBC和BMC都具有中心对称性,光二聚反应的高度立体选择性以及BBE和BME的光二聚反应不受空气中氧的影响的事实表明它们是经激发单线态历程以面对面的方式进行二聚反应的,本文检测到了BBE和BME在高浓度溶液中的激基缔合物荧光.     

微波法合成邻异丁烯氧基苯酚

对在微波催化条件下邻苯二酚和氯代异丁烯单醚化反应进行了研究,考察了各种不同碱、相转化剂、溶剂、微波功能和反应时间对反应的影响,邻异丁烯氧基苯酚的收率由常规方法的５４％提高到６８％,反应速率是常规方法的１２０倍。     

杂多化合物膜催化异丁烯选择氧化反应

 以多孔钛片为支撑体,将组成为HxCu1．2PAs0．6Mo12Oy的杂多化合物与具有氧溢流效应的氧化物Sb2O4制成催化膜,在特制的膜催化反应器中进行异丁烯选择氧化反应．结果表明,杂多化合物－Sb2O4催化膜具有较高的催化活性;在适宜的条件下,甲基丙烯酸收率可达26.3％,甲基丙烯醛收率可达22.4％,液体产物（即可用产物,包括甲基丙烯酸、甲基丙烯醛、乙酸和丙酮）收率可达67.4％．     

在液镓电极上反丁烯二腈的电氢化二聚

在液镓电极上,反丁烯二腈（ＦＤＮ）的电氢化二聚（ＥＨＤ）不仅能在含离子型表面活性剂如四乙基对甲苯磺酸铵（ＴＥＡ－ＰＴＳ）溶液中发生,同样也能在含低浓度的强表面活性剂如ＴｒｉｔｏｎＸ－１００溶液中进行,在不含有机表面活性剂的溶液中,ＦＤＮ在滴镓电极上产生一个２电子还原波,生成为丁二腈的饱和单体。在水溶液中加入一定浓度的ＴＥＡ－ＰＴＳ或低浓度的ＴｒｉｔｏｎＸ－１００时,原来的２电子还原波分裂成两个连续     

Highly Selective Dimerization and Trimerization of Isobutene to Linearly Linked Products by Using Nickel Catalysts

The unique linear linkage of isobutene to generate highly valuable C₈ precursors for plasticizers is feasible by using special nickel catalysts. (4‐Cyclooctene‐1‐yl)(1,1,1,5,5,5‐hexafluoro‐2,4‐acetylacetonato)nickel and aluminum‐alkyl‐activated nickel acetylacetonates produce isobutene dimers with high selectivities of up to 95 %. Moreover, selectivity for the head‐to‐head products (2,5‐dimethylhexenes) is remarkably high at up to 99 %. Additionally, novel C₁₂ isobutene trimers are also formed with a very high selectivity of up to 99 % for the linear linkage. The trimer structure (2,5,8‐trimethylnonenes) reflects the stepwise characteristic of the reaction mechanism. Pathways of insertion and activation and the deactivation processes of the catalyst are discussed in detail.     

Cathodic Dimerization

The technical, electrochemical, and preparative aspects of cathodic dimerization, which leads to bifunctional compounds, are reviewed. With the hydrodimerization of acrylonitrile as an example, the effects of the reaction parameters and the mechanism are discussed in detail. In addition to the hydrodimerization of activated compounds, the coupling can also proceed via elimination of halide or via the discharge of cations. Processes of special preparative interest are those in which two different molecules are coupled, which can yield e.g. esters, alcohols, or ketones with cyano groups, as well as asymmetric diols. The reductive dimerizations of acrylonitrile, β-chloropropionitrile, acetone, acetylpyridine, nitrobenzene (→ benzidine), and pyridinium salts have already found industrial use.     

Thermal elimination of isobutene from meta and para tert-di-butyl pyromellitic acid

An investigation of the kinetics of the thermal elimination of isobutene from the meta and para isomers of the tert-butyl diesters of pyromellitic acid has been carried out using Fourier transform-Raman spectroscopy and mass spectroscopy. These studies indicate that the elimination of the tert-butyl group occurs at a temperature 26°C lower for the meta isomer than for the para isomer; the maximum rate of elimination occurs at 184°C for the former and at 210°C for the latter. Analysis of the Raman spectra of the compounds indicates that this effect results from the better packing arrangement in the para monomer compared with the meta monomer. Formation of pyromellitic dianhydride in the tert-butyl diesters of pyromellitic acid occurred only after formation of the pyromellitic acid; thus it occurred at lower temperatures for the meta isomer. When the meta and para tert-butyl diesters of pyromellitic acid are dissolved at 1% concentration in poly (vinyl acetate), the elimination of isobutene occurs at 173°C for both isomers, indicating that it is the differences in crystal packing which give rise to the 26°C difference in the solid-state samples. For the meta, para, and 50/50 mixed isomers of the tert-butyl esters of oxydianiline/pyromellitic dianhydride polyamic acid, the elimination of the tert-butyl group occurs at the same temperature (177°C). This result indicates that the packing arrangement of the tert-butyl group is disrupted in the polymer chain, so that intermolecular bonding does not hinder thermal deprotection of the tert-butyl group from the polymer. © 1992 John Wiley & Sons, Inc.     

Mechanochemical Dimerization of Aldoximes to Furoxans

Solvent-free mechanical milling is a new, environmentally friendly and cost-effective technology that is now widely used in the field of organic synthesis. The mechanochemical solvent-free synthesis of furoxans from aldoximes was achieved through dimerization of the in situ generated nitrile oxides in the presence of sodium chloride, Oxone and a base. A variety of furoxans was obtained with up to a 92% yield. The present protocol has the advantages of high reaction efficiency and mild reaction conditions.     

Light-Induced Dimerization Approaches to Control Cellular Processes

Light-inducible approaches provide a means to control biological systems with spatial and temporal resolution that is unmatched by traditional genetic perturbations. Recent developments of optogenetic and chemo-optogenetic systems for induced proximity in cells facilitate rapid and reversible manipulation of highly dynamic cellular processes and have become valuable tools in diverse biological applications. New expansions of the toolbox facilitate control of signal transduction, genome editing, “painting” patterns of active molecules onto cellular membranes, and light-induced cell cycle control. A combination of light- and chemically induced dimerization approaches have also seen interesting progress. Herein, an overview of optogenetic systems and emerging chemo-optogenetic systems is provided, and recent applications in tackling complex biological problems are discussed.     

Radical copolymerization of N-alkylmaleimides with isobutene and the properties of the resulting alternating copolymers

Radical copolymerization of N-methylmaleimide (MeMI) as well as other N-alkylmaleimides (RMI) and isobutene (IB) was carried out with 2,2′-azobis(isobutyronitrile) as an initiator at 60°C. The initial rate of the copolymerization (R_p) was dependent on the monomer composition and was maximum at the 40 mol % of MeMI in the feed. A solvent effect on the R_p and the monomer reactivity ratio was observed in this copolymerization system, i.e., copolymerization in chloroform produced a higher R_p and an alternating tendency compared with those in dioxane (r_MeMI = 0.14, r_1B = 0 in chloroform and r_MeMI = 0.47, r_1B = 0 in dioxane). The alternating copolymer of RMI and IB shows a high glass transition temperature (T_g) and excellent thermal stability, e.g., the T_g and the thermal decomposition temperature (T_d) were 152 and 363°C, respectively, for the alternating copolymer of MeMI and IB. Both the T_g and T_d increased as the concentration of the MeMI unit in the copolymers increased. Colorless transparent sheets were obtained from press molding the alternating copolymers. They showed excellent mechanical and optical properties. © 1996 John Wiley & Sons, Inc.     

二茂铁亚胺环钯化合物－－一种新型芳基氯化汞偶联催化剂

发现在催化量二茂铁亚胺环钯化合物催化下，芳基氯化汞可在湿和条件下偶联 ，以中等或高的收率生成联芳烃。对于铑盐不能催化偶联的邻位取代苯基氯化汞和 α－基氯化汞，在此体系中亦可发生偶联。以HMPA为溶剂，在x = 0.025（摩尔分 数）化合物1或2催化下与2.0当量氯化锂存在时，得到最好的催化效果。     

Coke precursor as an intermediate during the alkylation of isobutene/butene over a solid superacid

~~Coke precursor as an intermediate during the alkylation of isobutene/butene over a solid superacid~~