The Mobility of Threaded α-Cyclodextrins in PR Copolymer and Its Influences on Mechanical Properties

The methylated polyrotaxane(Me PR) copolymer was prepared via the methylation of hydroxyl of threaded α-cyclodextrin(α-CDs) in polyrotaxane(PR) copolymer by CH_3I/Na H. Its structure was characterized by GPC, IR and NMR. The WXRD and TGA measurements showed the destruction of channel-like crystalline structure in Me PR copolymer. The sliding of threaded α-CDs along PEG axis in PR and Me PR copolymers was demonstrated by their dielectric spectra that also evidenced the presence of rotating of threaded α-CDs around PEG axis in Me PR copolymer. The frequent and vigorous molecular mobility in Me PR and PR copolymers was also verified by dynamic mechanical analysis(DMA) and rheological measurement, which was possibly assigned to the sliding and rotating of threaded α-CDs. DMA and rheological results showed that the mobility of α-CDs could simultaneously strengthen and toughen PR copolymer proved by stress-stain curves. In this paper, we report the CD mobility in PR and Me PR copolymers. The macroscopic behaviors of PR copolymer, such as mechanical properties in solid state, were also found to be benefited from CD mobility.     

SYNTHESIS AND CHARACTERIZATION OF POLYROTAXANES MADE FROM α-CDs THREADED ONTO TRIBLOCK COPOLYMERS WITH PEG AS A CENTRAL AXLE AND FLANKED BY TWO LOW MOLECULAR WEIGHT POLYSTYRENES AS OUTER STOPPERS

A study has been conducted on the synthesis and characterization of a kind of novel polyrotaxanes comprisingα- cyclodextrins (α-CDs) threaded on triblock eopolymers with poly(ethylene glycol) (PEG) as a central axle and flanked by two low molecular weight polystyrenes as outer stoppers.Styrene was allowed to telomerize with polypseudorotaxanes as chain transfer agents made from the self-assembly of a distal thiol-capped PEG with a varying amount ofα-CDs in the presence of a redox initiation system at 40~C in aqueous solutions.The resulting polyrotaxanes were characterized in detail by ~1H-NMR,FTIR,XRD,TG and DSC analyses.The findings from the study demonstrated that the low molecular weight polystyrenes were successfully attached to two axle terminals of polypseudorotaxanes,and the number ofα-CDs threaded onto the PEG backbone was tunable by varying its molar feeding ratio to some extent,while the polymerization degree of PS nearly remained constant in this radical telomerization process.     

Fabrication of Macroporous Protein-containing Films through the Reverse Emulsions Approach Featuring β-Cyclodextrin-conjugated PEG-PLGA Copolymers

A series of β-cyclodextrin-conjugated 4-arm poly(ethylene glycol)-poly(lactide-co-glycolide)(4-arm PEG-PLGA)copolymers were synthesized by a ring-opening polymerization of D,L-lactide and glycolide using 4-arm PEG as initiator,and then conjugated with mono(6-ethylenediamine-6-deoxy)- β-cyclodextrin(CDen) or ethylenediamino-bridged bis- β-CD(BCDen). The chemical structures of copolymers were confirmed by ~1H-NMR and FTIR spectroscopy. The β-CD-conjugated PEG-PLGA formed stable reverse micelles due to the formation of β-CD and bovine serum albumin(BSA) inclusion complexation, which could accommodate BSA in the organic solvent with improved encapsulation efficiency. Moreover, we demonstrated a one-step approach to construct macroporous protein-containing films using these reverse micelles. The films with ordered pore arrays were directly prepared from reverse micelles. Interestingly, the protein was totally located in the whole matrix except for the pores.     

Fabrication of Tubular Structure Agglomerates of Calcium Carbonate by Using Collodion Film

A novel and simple method for preparing tubular structure agglomerates of calcium carbonate (CC-tube) is described. Calcium chloride and sodium carbonate aqueous solutions were used as reactants separated by a collodion film (a nitrocellulose material) in aqueous solution. The effects of the concentrations of calcium chloride and sodium carbonate aqueous solutions on the morphology and phase structure of the as-obtained samples were investigated. The CC-tube growth was prevented with the increase of reactant concentration from 0.5 to 1.0 mol•L－1. Compared with Na2CO3 aqueous solution, it is favourable to grow calcite crystals in CaCl2 aqueous solution. The products were characterized by X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron- microscopy.     

Temperature responsive methacrylamide polymers with antibacterial activity

<正>A new methacrylamide monomer,hexylamine methacrylamide(MAHA),was synthesized and used in polymerizations.The homopolymer of MAHA and its copolymers were synthesized by free radical polymerization techniques with N-isopropyl acrylamide(NIPAAm) in two different compositions.The quaternization of the homopolymer and copolymers were carried out using 1-bromopropane.The copolymers with NIPAAm and a low MAHA content showed temperature-responsive behavior in an aqueous environment.The lower critical solution temperatures(LCSTs) of these polymers varied between 32℃and 44℃.The LCSTs of quaternized copolymers were higher than those of neutral copolymers because they were more hydrophilic.The obtained homopolymers and copolymers were tested for antibacterial activities against S.aureus and E.coli.The quaternized water-soluble copolymers showed antibacterial activities against S.aureus.The quaternization resulted in the synthesis of both antibacterial and temperature-responsive copolymers.     

Fluorocarbon- containing hydrophobically modified poly(N-isopropylacrylamide)

A fluorocarbon-modified poly(N-isopropylacrylamide) has been synthesized by copolymerization of N-isopropyl acrylamide with a small amount of acrylate or methacrylate containing a perfluoroalkyl group. It was found that the hydrophilicity of macromolecular backbone is an important factor to the solution properties of the copolymers and that hydrophobic association between fluorocarbon groups is stronger than that between the corresponding hydrocarbon analogies. The viscosity of some of the copolymer solutions was very sensitive to temperature. It was dilatant at higher fluorocarbon comonomer content ( > 0.20-1.0 mol%) and was Newtonian at very low fluorocarbon comonomer content (0.03-0.2 mol% ) . Evidence for hydrophobic association of the fluorocarbon groups was obtained from the effects of adding Nad and surfactants on the solution viscosity. The LC-ST properties of these copolymers were studied by DSC method and this was also found to be consistent with hydrophobic association between the fluorocarbo     

COMPARISON OF POLYSACCHARIDES ISOLATED FROM THE MYCELIA OF A CULTIVATED STRAIN OF PORIA COCOS GROWN IN DIFFERENT LIQUID CULTURE MEDIA

Mycelium of a cultivated strain of Poria cocos was grown by submerged fermentation in a liquid mediumcontaining corn steep liquor with orbital shaking. Six polysaccharides coded as ac-PCM1, ac-PCM2, ac-PCM3-Ⅰ andⅡ, ac-PCM4-Ⅰand Ⅱ were isolated from the myelium by extracting with 0.9% NaCl aqueous solution, hot water, 0.5 mol/L NaOHaqueous solution and 88% formic acid. Exo-polysaccharide was obtained from the culture medium and coded as ac-PCM0.The monosaccharide composition and molecular weights of these polysaccharides were characterized by using infraredspectroscopy, gas chromaography, elemental analysis, ~(13)C-NMR, viscometry and light scattering. The results indicated thatac-PCM0, ac-PCM1 and ac-PCM2 are heteropolysaccharides containing glucose, galactose, mannose and fucose, and ac-PCM3-Ⅰ and ac-PCM3-Ⅱ mainly consist of D-glucose. The content of the glucose in the polysaccharides increased with theisolation progress. Remarkably, α-glucan and β-glucan coexisted in the extract by NaOH aqueous solution (ac-PCM3), andcould be separated by chemical methods. The protein in the ac-PCM polysaccharides cultured from the medium containingcorn steep liquor was higher than that in the ab-PCM from the medium with bran extract. Therefore, the polysaccharidesfrom Poria cocos mycelia cultured in different media have different chemical composition, molecular weights and conformations.     

Supramolecular Micelles and Reverse Micelles Based on Cyclodextrin Polyrotaxanes

A new supramolecular self-assembly approach to construct micelles and reverse micelles was reported.Double-hydrophilic block copolymers poly(ethylene oxide)-b-poly(N-isopropylacrylamide) (PEO-b-PNIPAAm) was synthesized via atom transfer radical polymerization (ATRP) using PEO macroinitiator.Because of the lower critical solution temperature (LCST) phase behavior of PNIPAAm,PEO-b-PNIPAAm block copolymers self-assembled to form PNIPAAm-core micelles at 40 ℃.The PNIPAAm-core micelles were disassembled to unimers when the temperature was decreased to 25 ℃.But the addition of α-cyclodextrins (α-CDs) could induce the formation of PNIPAAm-shell micelles because of the "channel-type" crystallities induced by PEO/α-CDs polyrotaxanes.The assembly and disassembly procedure of micelles and reverse micelles were investigated by dynamic light scattering (DLS),X-ray diffraction (XRD),1H NMR and transmission electron microscopy (TEM).     

Phase Transition and Micellization of Temperature Responsive Dextran—graft—poly（N—isopropylacrylamide）Polymers

Phase behavior and micellization of dextran-graft-poly(N-isopropylacrylamide)(PNIPAAm)polymers in aqueous solution are investigated in this paper using DSC and AFM methods.It is found that with the increase of grafting(G%) of the copolymers the endothermic enthalpy during the phase transition increases significantly and the transition temperature decreases slightly.The phase transition behavior of the copolymers is scanning rate dependent.Micelles are formed whenever the solution temperature is raised above the LCST of the copolymers.It is proposed that by using this thermal responsive property of the copolymers,drugs could be incorporated into the micelles without employing any organic solvent.     

Thermosensitive polyion complex micelles prepared by self-assembly of two oppositely charged diblock copolymers

Polyion complex (PIC) micelles were spontaneously formed in aqueous solutions through electrostatic interaction between two oppositely charged block copolymers, poly(N-isopropylacrylamide)-b-poly(L-glutamic acid) and poly(N-isopropylacrylamide)-b-poly(L-lysine). Their controlled synthesis was achieved via the ring opening polymerization of N-carboxyanhydrides (NCA), ε-benzyloxycarbonyl-L-lysine (Lys(Z)-NCA) or γ-benzyl-L-glutamate (BLG-NCA) with amino-terminated poly(N-isopropylacrylamide) macroinitiator and the subsequent deprotection reaction. The formation of PIC micelles was confirmed by dynamic light scattering and transmission electron microscopy. Turbidimetric characterization suggested that the formed PIC micelles had a concentration-dependent thermosensitivity and their phase transition behaviors could be easily adjusted either by the block length of coplymers or the concentration of micelles.     

N-ALKYLPHENOTHIAZINE RADICAL CATIONS GENERATED IN THE CAVITY OF β-CYCLODEXTRINS IN A(?)UEOUS SOLUTION

Phenothiazine and i~+s derivatives were oxidized by l_2 and 2,2,6,6-tetrametbyl-4-acetyloxypiperidine oxoammonium hexachloroantimonate to the corresponding radical cationsin the cavity of β-cyclodextrins in aqueous solution.The mechanism of electron transferbetween substrates and oxidants is discussed in terms of association of β-CDs.     

SYNTHESIS AND CHARACTERIZATION OF A NOVEL FLUORINE-CONTAINING HYDROPHOBICALLY ASSOCIATING POLYMER*

In this article, the synthesis and characterization of a novel fluoromonomer and its copolymer withacrylamide is reported. 2 -perfluoroamyl -4- hydroxylquinoline 2 was synthesized from ethyl 2, 2 -dihydro-perfluoroheptanoate in high yields. The monomer 4 was then synthesized from 2 in two steps readily in highyields. Synthesis and characterization of copolymers of acrylamide (AM) and the fluoromonomer wereinvestigated. The composition and intrinsic viscosity of these copolymers were studied. It was found that therheological properties of aqueous solutions of polyacrylamide were modified significantly when a smallproportion of the fluoromonomer 4 was incorporated on investigating the viscosity-concentration profiles,pseudoplasticity of these solutions and the effect of the presence of surfactant These results could beexplained by the hydrophobic association of the fluorocarbon segments in the aqueous solutions of thesecopolymers.     

GRAFTING OF ACRYLAMIDE ONTO SURFACE OF COPOLYMERS CONTAINING P-TOLYLCARBAMOYL PENDANT GROUP INITIATED WITH CERIC SALT

Two copolymers containing p-tolylcarbamoyl pendant group poly (MAMT-co-VAc) and poly(MAMT-co-MA) were synthesized f and the graft copolymerization of AAM onto these two func-tional copolymers films initiated with ceric salt were carried out in aqueous solution for variousperiods at 30℃. The formation of graft copolymer was verified by water absorption, ESCA andSEM photographs. Based on the results of the study of the initiation mechanism of model com-pounds and ceric salt systems, the reaction mechanism of the graft copolymerization initiated withceric salt was proposed.     

Study on the Supramolecular Interaction of β-Cyclodextrin with Gemfibrozil by Spectrofluorimetry and Its Analytical Application

The supramolecular interaction of gemfibrozil with β-cyclodextrin （β-CD） was studied by spectrofluorimetry. The mechanism of the inclusion was discussed by spectrofluoremetry, infrared spectrum and ^1H NMR spectrum. The results showed that a 1 ： 1 （β-CD ： gemfibrozil） complex was formed with an apparent association constant of 3.844 × 10^3 L·mol^-1. Based on the enhancement of the fluorescent intensity of gemfibrozil, a spectrofluorimetric method for the determination of gemfibrozil in bulk aqueous solution in the presence of β-CD was developed. The linear range was 3.30 ng·mL^- 1 -6.00 ug·mL^-1 with the detection limit of 0.980 ng·mL^-1. There was no interference from the excipients normally used in tablet composition and the serum main compositions. The proposed method was then successfully applied to the determination of gemfibrozil in capsules and serum.     

CATALYTIC COPOLYMERIZATION OF STYRENE AND ETHYLENE BY NEUTRAL NICKEL(Ⅱ) COMPLEXES IN EMULSION

Emulsion copolymerization of styrene and ethylene catalyzed by a series of neutral nickel(Ⅱ) complexes was carried out in an aqueous system to give high-molecular-weight copolymers.The copolymers and emulsions were characterized by an array of techniques including NMR,GPC,TEM,WAXD and DSC.The results indicate that the copolymers obtained are mostly block copolymers of polyethylene with random insertion of styrene units,and their M_W is in the range of 10~5-10~6.By enhancing the electron withdrawing of th...     

Removal of Cd（ Ⅱ ） from Aqueous Solutions by Natural Freshwater Surface Coatings

Natural freshwater surface coatings (biofilms and associated minerals), which were developed in the Nanhu Lake, Changchun, P. R. China, were used as an efficient biosorbent for the removal of Cd(Ⅱ) from aqueous solutions. The batch experiments were carried out to determine the adsorption properties of Cd(Ⅱ) onto the natural surface coatings. The classical Langmuir adsorption isotherm was applied to estimating the equilibrium coefficients of Cd(Ⅱ) adsorbed on the surface coatings. The results show that the maximum adsorption capacity of the surface coatings is 434. 78μmol Cd/m^2 (being equal to 0. 17mmol Cd/g of surface coatings or 10. 38mmol Cd/g Fe) and the Cd(Ⅱ) remnoval from solution media by the natural surface coatings was shown to be strongly affected by solution pH and ion strength. The resulted information also indicates that the maximum Cd removal efficiency(CRE) was determined to be approximately 90% at initial Cd mass concentration of 0. 1mg/L (the concentration limit of Cd (Ⅱ) in wastewaters for discharge in aquatic media in Chinese legislation), and the kinetic adsorption of Cd (Ⅱ) onto the surface coatings is fast with around 70% of the total adsorption-taking place in 150min in solution under the controlied laboratory conditions (mineral salts solution with defined speciation, ionic strength 0. 05mol/L, and 25℃). With the advantage of high Cd adsorption capacity, the natural surface coatings appear to be a potentially effective biosorbent for the removal and recovery of Cd(Ⅱ) from polluted water.     

Catalyzed oxidation of 2,6-dimethylphenol in Triton X- 100 micellar solution

The oxidative coupling reaction of 2,6-dimethylphenol with H2O2 catalyzed by a copper(Ⅱ) Schiff complex in aqueous and Triton X-100 micellar solution under mild conditions was investigated. The kinetics of formation of 3,3′,5,5′-tetramethyl-4,4′-diphenoquinone (DPQ) was studied. Rate constant k2 were obtained. The optimum pH for DPQ generation reaction is 7.25. The main product was DPQ in aqueous buffer solution, but PPE and the oxidized products of PPE remained in Triton X-100 micellar solution.     

Synthesis and characterization of poly[(methylsilylene ethynylenephenyleneethynylene)-co-(dimethylsilylene ethynylenephenyleneethynylene)]s

<正>A series of poly[(methylsilylene ethynylenephenyleneethynylene)-co-(dimethylsilylene ethynylenephenyleneethynylene)]s were synthesized by the incorporation of various ratios of methylsilylene to dimethylsilylene units into the polymer chain backbone.The resultant copolymers were soluble in a variety of common organic solvents at room temperature.The copolymers were characterized by FT-IR,~1H-NMR,GPC,rheological analysis,differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA).The results showed that the copolymers exhibited good processability and cured at low temperatures like 200℃.The curing reactions involved in hydrosilylation of Si—H and alkyne groups and the polymerization of alkynes.Y_(d5)(5%weight loss) of the cured copolymers ranged from 629℃to 686℃,and the decomposition residues of cured copolymers at 1000℃ranged from 88.1%to 90.9%under nitrogen.Thermal stability of the copolymers increased with the introduction of methylsilylene units into polymer chains.The cured copolymers were sintered at 1450℃,and the results of X-ray diffraction analysis showed that β-SiC was formed in the sintered products.     

Synthesis and Characterization of a Novel Acrylonitrile Copolymer Containing Glucose Pendants

In this work,a novel sugar-containing copolymer was synthesized by the copolymerization of α-allyl glucoside(AG) with acryloniutrile(AN).The copolymers were characterized by NMR Spectroscopy.It was found that acrylonitrile-based copolymers containing as high as 22wt.% of α-allyl glucoside can be synthesized by the free radical solution copolymerization of the two monomers in DMSO with AIBN as initiator.     

The amphiphilic multiarm copolymers based on hyperbranched polyester and lysine: Synthesis and self-assembly

The amphiphilic multiarm copolymers were synthesized through the modification of commercially available hyperbranched polyesters(Boltorn H40) with N-ε-carbobenzoxy-L-Lysine N-carboxyanhydride(ZLys-NCA).After being condensed with N-Boc-phenylalanine(Boc-~NPhe) and deprotected the Boc-groups in trifluoroacetic acid(TFA),the original terminal hydroxyl groups were transformed into the amino groups and then initiated the ring-opening polymerization of ZLys-NCA.The hydrophilic poly(L-lysine) was grafted to the surface of Boltorn H40 successfully after the protecting benzyl groups were removed by the HBr solution in glacial acetic acid(33 wt%).The resulting multiarm copolymers were characterized by the ~1H-NMR,GPC and FTIR.The arm length calculated by NMR and GPC analysis was about 3 and 13 lysine-units for H40-Phe-PLysl and H40-Phe-PLys2 respectively.Due to the amphiphilic molecular structure,they displayed ability to self-assemble into spherical micelles in aqueous solution with the average diameter in the range from 70 nm to 250 nm.The CMC of H40-Phe-PLysl and H40-Phe-PLys2 was 0.013 mg/mL and 0.028 mg/mL,respectively, indicating that H40-Phe-PLysl with shorter arm length is easier to self-assemble than H40-Phe-PLys2 with longer arm length.