Controlling the form of strong converging shocks by means of disturbances

The influence of artificial disturbances on the behavior of strong converging cylindrical shocks is investigated experimentally and numerically. Ring-shaped shocks, generated in an annular cross sectional shock tube are transformed to converging cylindrical shocks in a thin cylindrical test section, mounted at the rear end of the shock tube. The converging cylindrical shocks are perturbed by small cylinders placed at different locations and in various patterns in the test section. Their influence on the shock convergence and reflection process is investigated. It is found that disturbances arranged in a symmetrical pattern will produce a symmetrical deformation of the converging shockfront. For example, a square formation produces a square-like shock and an octagon formation a shock with an octagonal front. This introduces an alternative way of tailoring the form of a converging shock, instead of using a specific form of a reflector boundary. The influence of disturbances arranged in non-symmetric patterns on the shape of the shockfront is also investigated.      

Regular versus Mach reflection for converging polygonal shocks

The onset of Mach reflection or regular reflection at the vertices of a converging polygonal shock wave was investigated experimentally in a horizontal annular shock tube. The converging shock waves were visualized by schlieren optics. Two different types of polygonal shock convergence patterns were observed. We compared the behavior during the focusing process for triangular and square-shaped shocks. It is shown that once a triangular shaped shock is formed, the corners in the converging shock will undergo regular reflection and consequently the shape will remain unaltered during the focusing process. A square-shaped shock suffers Mach reflections at the corners and hence a reconfiguring process takes place; the converging shock wave alternates between a square and an octagon formation during the focusing process.      

Focusing of strong shocks in an elliptic cavity

Focusing of strong shock waves in a gas-filled thin chamber with an elliptic boundary is investigated theoretically and numerically. The process of reflection and convergence of cylindrical shocks generated at one of the focal points of the chamber is studied by means of Whitham's theory of geometrical shock dynamics (1957, 1959). The current calculations are based on the modified version of this theory, which takes into account the non-homogeneous flow ahead of the advancing shock, Apazidis and Lesser (1996). There are two main results of the present study indicating a qualitatively different behavior of strong shocks as compared to the linear acoustic case. (1) - the form of the reflected shock is not cylindrical and (2) - the reflected, converging shock does not focus at the geometrical second focal point of the chamber. The dependence of the form of the reflected shock and the location of its focusing point on the strength of the shock and the eccentricity of the chamber is investigated.     

An experimental and theoretical study of converging polygonal shock waves

An experimental investigation was carried out to explore the possibility of producing converging polygonal shocks in an essentially two-dimensional cavity. Previous calculations by Apazidis and Lesser (1996) suggested that such configurations could be produced by reflecting a cylindrical outgoing shock from a smoothly altered circular boundary, the alteration having n-gonal symmetry. In the experiments the outgoing shock was produced by a spark discharge which yielded shocks in the Mach number range from 1.1 to 1.7 at a radius just prior to the reflection. Polygonal shocks were observed as predicted by using a modified form of geometrical shock dynamics, derived in the above paper. In addition, the modified theory was used to calculate the results of an experiment carried out by Sturtevant and Kulkarny (1976). The results of the numerical calculations were found to be in substantial agreement with both experiments, suggesting that the modifications in geometrical shock dynamics for non-uniform flow ahead of an advancing shock are useful in the case of shock focusing. The experiment also showed that the polygonal shapes were stable in the examined range of shock Mach numbers, a result that may be of importance for a number of practical situations in which shock focusing is present. Received 9 October 2001 / Accepted 7 January 2002 – Published online 11 June 2002     

Measurement of Reflected-shock Bifurcation Over a Wide Range of Gas Composition and Pressure

To determine the extent and magnitude of reflected-shock bifurcation in shock-tube chemistry studies at elevated pressures, experiments were performed using a simple laser schlieren technique and a fast- response pressure transducer. The laser schlieren diagnostic provided a quantitative measurement of the normal-shock passage, an event normally obscured in pressure signals by the bifurcated region. A range of gas mixtures covering molecular weights from 14.7 to 44.0 and specific heat ratios from 1.29 to 1.51 was explored. The results were combined with a standard gas dynamic model to determine the time of arrival of the normal shock wave, the size and strength of the bifurcated region, and the characteristic passage times of dominant features. All results could be expressed in empirical correlations as functions of the gas properties and shock speed. The measured size of the bifurcation zone increased with increasing shock velocity and decreasing specific heat ratio, but displayed no pressure dependence for the conditions of this study (P ₅ = 11 − 265 atm., T ₅ = 780 − 1740 K).     

Focusing of weak shock waves in confined axisymmetric chambers

Theoretical study of a weak shock wave focusing process on a spherical region in confined 3-D axisymmetric chambers is presented. The chambers are elliptic or parabolic in the plane cross-section containing their axis of symmetry. In the elliptic case a spherical shock wave of constant strength generated at one of the focal points will reflect off the chamber wall and converge on a spherical region around the second focus of the chamber. It is shown that the pressure distribution on the converging spherical shock wave is not homogeneous. In the parabolic case two possibilities of shock generation are considered. In the first one a plane shock wave of constant intensity is send in the inner of the chamber. This shock wave with the plane perpendicular to the symmetry axis will after the reflection off the chamber wall transform to a spherical shock with non-homogeneous pressure distribution. Alternatively, a spherical shock of constant intensity generated at the focus of the paraboloidal chamber will after the reflection transform to a plane shock with non-homogeneous pressure distribution propagating in the outer of the chamber. The above mentioned problems are solved within the frame of the geometrical acoustics approximation and the flow fields as well as the non-uniform shock strengths behind the converging wave fronts are calculated.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.     

Shock waves in an elliptical cavity with varying height

Transient shock waves in a confined elliptical chamber are experimentally investigated. Quantitative results of the pressure distribution are obtained for an air-filled cavity. Lower bounding surfaces of different geometrical shapes can be inserted making it possible to get chambers with varying height. An electrical discharge across a pair of electrodes inside the cavity gives rise to the shock waves. Double pulsed holographic interferometry is used to study the propagation and focusing process of the waves. The results are quantitatively evaluated by using the method of two-reference-beam holography. The angular pressure distribution behind the converging wave front is presented for different geometries of an air-filled cavity. The pressure distribution is non-homogeneous but symmetric along the wave front. The pressure level is higher for the geometry where the height of the chamber decreases with the radial distance from the outgoing focus and lower for increasing height of the chamber. In addition, shock waves in a water-filled cavity are studied. In this case qualitative results are obtained. Received 3 November 1996 / Accepted 5 January 1997     

双驱动激波管稀疏波破膜技术研究

本文介绍了在双驱动激波管中运用稀疏波破膜的技术。在以压缩空气和氮气作实验气体的情形下,实验研究了中间段长度、稀疏波强度及中间段B膜的破膜压力（压差）对第二激波追韩第一激波的影响。实验结果表明：中间段的长短,显著地制约着前后两道激波的间隔;稀疏波强度及中间段B膜的破膜压力对稀疏波破膜时间及第二激小对反射稀疏波的追赶有重要影响。     

激波管实验研究非均匀流场R-M不稳定性

利用激波管装置及马赫数为1.27的弱入射激波实验研究了SF6非均匀流场的R-M不稳定性。Air/SF6初始正弦界面由厚度为0.5μm的薄膜相隔得到,由阴影方法记录界面演化过程。实验结果表明:由于不稳定性,重流体(SF6)向轻流体(Air)演化成"尖钉"结构,而轻流体演化为"气泡"结构;由于界面切向速度差的Kelvin-Helmholtz不稳定性,"尖钉"头部翻转成蘑菇头形状;由于流场密度分布不均,低密度区流场扰动增长较快,扰动振幅发展的实验结果与PPM数值计算的结果较吻合。     

Investigation of high-speed combustible gas ignited by a hot gas jetproduced in the shock tube

The high-speed combustible gas ignited by a hot gas jet, which is induced by shock focusing, was experimentally investigated. By use of the separation mode of shock tube, the test section of a single shock tube is split into two parts, which provide the high-speed flow of combustible gas and pilot flame of hot gas jet, respectively. In the interface of two parts of test sections the flame of jet was formed and spread to the high-speed combustible gas. Two kinds of the ignitions, 3-D “line-flame ignition” and 2-D “plane-flame ignition”, were investigated. In the condition of 3-D “line-flame ignition” of combustion, thicker hot gas jet than pure air jet, was observed in schlieren photos. In the condition of 2-D “plane-flame ignition” of combustion, the delay time of ignition and the angle of flame front in schlieren photos were measured, from which the velocity of flame propagation in the high-speed combustible gas is estimated in the range of 30–90m/s and the delay time of ignition is estimated in the range of 0.12–0.29ms. PACS 47.40.Nm; 82.40.FpPart of this paper was presented at the 5th International Workshop on Shock/Vortex Interaction, Kaohsiung, October 27–31, 2003.     

Characteristics of an annular vertical diaphragmless shock tube

Abstract. This paper reports on the characteristics of a compact vertical diaphragmless shock tube, which was constructed and tested in the Shock Wave Research Center to study experimentally the behavior of toroidal shock waves. It is 1.15 m in height and has a self-sustained co-axial vertical structure consisting of a 100 mm i.d. outer tube and an 80 mm o.d. inner tube. To create a ring shaped shock wave between the inner and outer tubes, a rubber sheet is inserted to separate a high pressure driver gas from a test gas, which is bulged with auxiliary high pressure helium from the behind. When the rubber membrane is contracted by the sudden release of the auxiliary gas so as to break the seal, shock waves are formed. Special design features of the shock tube are described and their role in producing repeatable shock waves is discussed. Its special opening characteristics make possible the production of annular shaped shock waves that are unlikely met with a conventional tube that uses rupturing diaphragms. Performance of the shock tube is evaluated in terms of the shock wave Mach numbers and the measured flow properties. It eventually showed a higher degree of repeatability and the scatter in the shock wave Mach numbers Ms was found to be 0.2% for Ms ranging from 1.1 to 1.8. The shock wave Mach number so far measured agreed very well with the simple shock tube theory. Received 3 February 1999 / Accepted 6 April 2000     

激波管中实验模拟爆炸波对水汽作用的研究

利用激波管中波系间的相互干扰，实验模拟了爆炸波对水汽的作用，并通过光学测试方法，对水汽同质核化、凝结非定常瞬态变化过程进行了测定．结果表明：在爆炸波强度较弱时，水汽不发生凝结；而在一定强度爆炸波后的非定常流场中，水汽会发生同质核化、凝结．这说明较强爆炸波后的绝热冷却过程可以使水汽发生相变     

激波在平板上诱导的旋涡强度的测量

运动激波通过两个等攻角平板后诱导出两个同向旋转的旋涡，这两个旋涡在随当地气流向下游运动的同时，绕涡核连线中心旋转。本文通过测量涡对的转动角度速度，获得了每个旋涡的强度。实验结果表明，由此测得的旋涡强度不同用于小攻角平板起动涡公式计算了起动涡强度。     

Shock pattern in the plume of rocket nozzles: needs for design consideration

For ideal nozzles, basically two different types of shock structures in the plume may appear for overexpanded flow conditions, a regular shock reflection or a Mach reflection at the nozzle centreline. Especially for rocket propulsion, other nozzle types besides the ideal nozzles are often used, including simple conical, thrust-optimized or parabolic contoured nozzles. Depending on the contour type, another shock structure may appear: the so-called cap-shock pattern. The exact knowledge of the plume pattern is of importance for mastering the engine operation featuring uncontrolled flow separation inside the nozzle, appearing during engine start-up and shut-down operation. As consequence of uncontrolled flow separation, lateral loads may be induced. The side-load character strongly depends on the nozzle design, and is a key feature for the nozzle’s mechanical structure layout. It is shown especially for the VULCAIN and VULCAIN 2 nozzle, how specific shock patterns evolve during transients, and how - by the nozzle design - undesired flow phenomena can be avoided.     

一种新的运动激波--非定常边界层相互干扰现象

本文探讨了一种新的激波－非定常边界层相互干扰现象，这种激波－边界层干扰现象既不同于定常激波－边界层干扰现象，又不同于激波在端面反射后与该激波所诱导的边界层之间的干扰现象，而是运动激波与稀疏波和第一激波所诱导的非这常边界层之间的干扰现象，本文对这种现象用微波动力学理论进行分析，并把这种干扰现象看成激波的绕射现象，同时在稀疏波破膜的双驱动激波管中进行实验观察，最后把理论分析与实验观察进行了比较。     

环空后台阶管道内气固两相流动的数值模拟研究

环空管道后台阶突扩流动是空气正循环钻井过程中十分重要的关键部分,直接决定了钻探岩屑是否能够顺利上返地面.本文采用Euler-Lagrange两相流研究方法,气相湍流采用Realizable k-ε模型,固相采用离散相模型(DPM),固相的湍流耗散采用随机轨道模型,对环空后台阶突扩管道内气固两相流动进行了数值模拟研究.得出了气相场大涡演变规律,在此基础上研究了不同粒径时颗粒在流道中的浓度分布规律、运动轨迹,以及速度场分布规律.这为细观框架下研究气固两相相互作用规律提供了依据.     

Stability of Semi-Discrete Shock Profiles by Means of an Evans Function in Infinite Dimensions

Semi-discrete shock profiles are traveling wave solutions of hyperbolic systems of conservation laws under discretization in space. The existence of semi-discrete shocks has been investigated in earlier papers. Here the spectral stability of those nonlinear waves is addressed, and formulated in terms of a variational delay differential operator. Constructing a generalized Evans function, in infinite dimensions, it is shown how to derive stability criteria. Some examples are given when the criterion is fully explicit, e.g., for extreme Lax shocks. Additionally, connection is made with the alternative approach proposed by Chow, Mallet-Paret, and Shen (Journal of Differential Equations 1998), regarding the stability of traveling waves in general Lattice Dynamical Systems.     

Numerical investigation of toroidal shock wave focusing in a cylindrical chamber

In this paper, focusing of a toroidal shock wave propagating from an annular shock tube into a cylindrical chamber was investigated numerically with the dispersion controlled dissipation (DCD) scheme. The first case for an incident Mach number of 1.5 was conducted and compared with experiments for validation. Then, several cases were calculated for higher incident Mach numbers varying from 2.0 to 5.0, and complicated flow structures were observed. The numerical study was mainly focused on two aspects: focusing process and flow structures. The process, including diffraction, focusing, and reflection, is displayed to reveal the focusing mechanism, and the flow structures at different incident. Mach numbers are used to demonstrate shock reflection styles and focusing characteristics. PACS 47.40.Ki; 47.40.Nm; 52.35.Tc