渣油加氢处理前后沥青质的微观结构研究

采用元素分析、扫描电镜和透射电镜等分析方法对渣油原料中的沥青质、加氢处理后的沥青质及添加高芳香性轻循环油(LCO)反应后的沥青质进行对比研究。结果发现,渣油加氢处理前后沥青质的表面呈现出光滑表面和多孔的球形颗粒表面两种完全不同的形貌。渣油加氢前后沥青质的芳核堆砌表现出明显的长程无序局部有序的特征;加氢处理后的沥青质芳核片层易于堆砌,出现了多层堆砌、长程有序的类石墨结构。渣油中高芳香性LCO的添加有利于促进沥青质的加氢反应、改善沥青质芳核系统在渣油加氢处理过程中的聚集行为。     

Characterization of nanomaterials in food by electron microscopy

Engineered nanomaterials (ENMs) are increasingly being used in the food industry. In order to assess the efficacy and the risks of these materials, it is essential to have access to methods that not only detect the nanomaterials, but also provide information on the characteristics of the materials (e.g., size and shape).This review presents an overview of electron microscopy (EM)-based methods that have been, or have the potential to be, applied to imaging ENMs in foodstuffs. We provide an overview of approaches to sample preparation, including drying, chemical treatment, fixation and cryogenic methods. We then describe standard and non-standard EM-based approaches that are available for imaging prepared samples. Finally, we present a strategy for selecting the most appropriate method for a particular foodstuff.     

Determination of Sulfite in Botanical Medicine Using Headspace Thin-Film Microextraction and Surface Enhanced Raman Spectrometry

A facile method using headspace thin-film microextraction (HS-TFME) coupled with surface enhanced Raman spectrometry (SERS) has been developed for the determination of sulfite in traditional Chinese herbal medicine. The extraction substrate was synthesized by depositing urchin-like ZnO micron particles on glass sheets using chemical liquid phase deposition. Under the optimal conditions, the intensity of the SERS signal at 630–640?cm^?1 provided a good linear relationship with the concentration of sulfite from 25 to 400?mg/kg, and the linear correlation coefficient (R) was 0.996 with a detection limit of 6?mg/kg. The method was employed for the determination of sulfite in herbal medicines, and the results were confirmed by a traditional distillation-titration method. Therefore, this developed HS-TFME-SERS method may play an important role in the rapid, simple, and selective determination of sulfite residues in Chinese herbal medicine and become a potentially universal method for this analyte in various solid samples.     

Structural Study of Micro and Nanotubes Synthesized by Rapid Thermal Chemical Vapor Deposition

The structures of micro and nanotubes obtained by pyrolysis of hydrocarbons, hold onto silicon (Si) substrates, are reported in this work. The tubes fabrication experiments were carried out by Rapid Thermal Chemical Vapor Deposition (RTCVD) using propane (C₃H₈) as carbon (C) precursor. Selection of parameters such as temperature of deposition, vacuum conditions or surface cleaning leads to the creation of tubular structures. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), selected area electron diffraction (SAED) and energy dispersive X-ray measurements (EDX) are the microbeam techniques that allow to characterize the tubes found in the studied specimens. Different tube configurations such as isolated nanorods, Y-type junctions or fiber-like layers are evidenced. Metallic catalysis seems to be the mechanism involved in the wires formation since Fe particles are present inside the CNT tubes. Other poly-crystalline inclusions are also evidenced by SAED. The composition of the nanotubes changes from tip to tail in an amorphous matrix. The growth mechanisms leading to tube formation are described.     

Macroscopic single‐domain graphene sheet on Ni(111)

We observed in situ growth of a single graphene sheet on Ni(111) by low‐energy electron microscopy. The sheet was grown epitaxially beyond the steps on the substrate. The crystalline shapes of graphene islands were clearly seen; the straight edges of the island are crossed at either 60 or 120°, and the linear edges shifted perpendicular to the edge keeping the equilibrium shape. Graphene islands were united to form a single sheet without any grain boundaries and any wrinkles. The Ni substrate of several centimeters in size was covered with a single‐domain graphene sheet. Copyright © 2011 John Wiley & Sons, Ltd.     

Theoretical and experimental analyses of the deposited silver thin films

The silver thin films have been prepared using magnetron DC‐sputtering. We discuss in detail the thin films AFM images and their properties in different sputtering times of 2 to 6 minutes. Despite the low thickness of the films, the roughness saturation amounts, W_s, are well separated. The surface data do not follow the normal Family‐Vicsek scaling, and we have the local growth exponent, β(W_s(t)∼t^β). We obtained the global roughness scaling exponent α=0.36 and growth exponent, β=0.50. We also obtain the fractal spectrum of the data, f(α). The results show that the spectrum is right‐hook like. It distinguishes between different film thicknesses even in small sizes of hundreds of nanometers. Furthermore, we measure the surface conductivities and compare them to the thin film roughnesses. We investigate the roughness and fractality of the AFM data, looking for their relations to width and conductivity of the silver thin film samples.     

Advanced TEM Characterization for Single-atom Catalysts: from Ex-situ Towards In-situ

Clean energy innovation has triggered the development of single-atom catalysts(SACs) due to their excellent catalytic activity, high tunability and low cost. The success of SACs for many catalytic reactions has opened a new field, where the fundamentals of catalytic property-structure relationship at atomic level await exploration, and thus raises challenges for structural characterization. Among the characterization techniques for SACs, aberration-corrected transmission electron microscopy(TEM) has become an essential tool for direct visualization of single atoms. In this review, we briefly summarize recent studies on SACs using advanced TEM. We first introduce TEM methods, which are particularly important for SACs characterization, and then discuss the applications of advanced TEM for SAC characterization, where not only atomic dispersion of single atoms can be studied, but also the distribution of elements and the valence state with local coordination can be resolved. We further extend our review towards in-situ TEM, which has increasing importance for the fundamental understanding of catalytic mechanism. Perspectives of TEM for SACs are finally discussed.     

AFM imaging of RGD presenting synthetic extracellular matrix using gold nanoparticles

Several high-resolution imaging techniques such as FESEM, TEM and AFM are compared with respect to their application on alginate hydrogels, a widely used polysaccharide biomaterial. A new AFM method applicable to RGD peptides covalently conjugated to alginate hydrogels is described. High-resolution images of RGD adhesion ligand distribution were obtained by labeling biotinylated RGD peptides with streptavidin-labeled gold nanoparticles. This method may broadly provide a useful tool for sECM characterization and design for tissue regeneration strategies.     

Statistical evaluation of potash-lime-silica glass weathering

Two potash-lime-silica model glasses with compositions similar to those of medieval stained glass were exposed at 26 test sites all over Europe and in North America for 3–6 years. The objectives of this large-scale field exposure programme were: (a) a qualitative analysis of the weathering products formed on the surface of the samples in the (environmental) scanning electron microscope in combination with energy dispersive X-ray microanalysis (ESEM/EDX or SEM/EDX, respectively); (b) a statistical evaluation of the weathering phenomena by applying a multiple linear regression (MLR) analysis to find correlations between the degree of weathering, which was measured in terms of surface coverage with reaction products, and environmental parameters such as the concentration (c) of the acidifying gases SO₂, NO₂ and O₃, the temperature (T) and the relative humidity (RH); and (c) the calculation of a time-dependence function of the weathering process of these glasses. Mainly sulfates of calcium and potassium such as gypsum (CaSO₄·2 H₂O), arcanite (K₂SO₄) and syngenite (CaSO₄·K₂SO₄·H₂O) could be identified in the SEM and ESEM. Carbonates, nitrates and many particles deposited on the glass surface were found as well. MLR calculations exhibit significant dependencies of the degree of weathering on T, RH, c(NO_x), c(SO₂) and c(O₃). Applying a time-dependence function of the general form y=a·t^b (t=time) results in a value of approximately 0.42 for the exponent b, which comes close to values expected from various studies in the literature.     

The performance of degradable polymer bags

The use of degradable polymers for the collection and composting of organic wastes is explored within this paper. With reference to one trial where the performance of a ‘degradable’ polyethylene based sack for the kerbside collection of organic wastes was investigated. Areas for consideration were the impacts of the degradable polymer on the composting process and the quality of the finished product. This trial also included a comparative study of two different types of ‘degradable’ polymer sacks currently on the European market (polyethylene and starch). A number of quantitative tests were conducted on the different polymers to assess the mechanisms of degradation and how this affected their suitability for the treatment of organic wastes. Provisional results have indicated that the polyethylene (PE) sacks are not degrading as anticipated within open windrow conditions, adversely affecting both the composting process and the quality of the finished compost product. Whilst the degradable starch based sacks appear to actively degrade within open windrow compost conditions.     

Energy filtered transmission electron microscopy for the physico-chemical characterization of aquatic submicron colloids

A combination of energy filtered transmission electron microscopic (EF-TEM) procedures is proposed for the non-perturbing physico-chemical characterization of submicron mineral and organic colloids in aquatic systems. Synthetic hematite microparticles and xanthan polysaccharides were used as well-characterized model colloids in order to determine the optimum EF-TEM analysis conditions. In this paper, it is demonstrated that (i) our model colloids are morphologically representative of naturally occurring mineral/organic associations, (ii) EF-TEM allows the detection of fine xanthan ultrastructures without artefacts of conventional staining methods and (iii) submicron hematite particles can be specifically visualized and spectrometrically measured by EF-TEM within a hematite/xanthan mixture. This EF-TEM procedure appears to be appropriate for the characterization of real aquatic samples.     

Study of PVB aggregation process by electron microscopy

The structure of aggregates formed from poly(vinyl butyral) (PVB) in tetrahydrofuran (THF) was studied by transmission electron microscopy (TEM). We have found that the primary associated particles are nearly spherical and, as the association advances, the particles lengthen. Eventually aggregates branch to form a three-dimensional network. The bulk PVB was investigated by scanning electron microscopy (SEM). We have found that the bulk PVB grains are aggregates of the particles the shape and dimension of which are similar to those of the primary associated particles formed in PVB solution. © 1994 John Wiley & Sons. Inc.     

Photo Polymerized Interpenetrating Polymer Network of Poly(antimony acrylate) and Poly(arsenic acrylate): Synthesis and Characterization

A series of IPN based on poly(antimony acrylate) and poly(arsenic acrylate) have been synthesized by a sequential mode of synthesis. Formation of complex based on “polymer solvent” method reflects the contraction of the polymer coils by determining the value of mutual interaction constant (k_AB) in different solvents such as dimethylsulphoxide (DMSO) (k_AB=0.60); dimethylformamide (DMF) (k_AB=0.42); dioxane (k_AB=0.26) predicting weak Vander Waal interaction. The scanning electron microscopy reveals dual phase morphology of both metal acrylates. The infrared spectrum indicates characteristic frequencies of (>C?O) at 1730 cm^?1,thus giving structural evidence for IPN. The properties namely percentage swelling, average molecular weight between crosslinks(M_c),Young's modulus, increases with concentrations of linear polymer(polyantimony acrylate) and initiator (benzoyl peroxide). However, it decreases with concentrations of monomer (arsenic acrylate) and crosslinker (divinyl benzene).The value of activation energy calculated from thermo gravimetric analysis is 15 KJ/mol.     

Studies on the Film Formation of Polysaccharide Based Furan-2-Carboxylic Acid Esters

Furan-2-carboxylic acid esters of xylan, cellulose, curdlan, dextran, and starch were synthesized and studied regarding their film formation abilities. The polysaccharide esters were utilized to prepare films of different appearance. To investigate supermolecular structures of the biopolymer derivatives, atomic force- and scanning electron microscopy were applied. The surface roughness and the macro-pore size and -distribution of the polysaccharide ester films were characterized. Starch furan-2-carboxylic acid ester (starch furoate) did not show film formation. In contrast, dextran furoates are very well suitable for the surface coating of inorganic compounds while the xylan-, cellulose-, and curdlan derivatives yield self-supporting films with different surface characteristics.     

Evaluation of asymmetrical structure dialysis membrane by tortuous capillary pore diffusion model

The tortuous capillary pore diffusion model (TCPDM) has been used for estimating diffusive and pure water permeability from simple structure parameters such as pore diameter, surface porosity, wall thickness and tortuosity. The validity of this model for evaluation of homogeneous membrane has been already confirmed. Recently, there is a trend toward the use of asymmetrical dialysis membranes made of synthetic polymer such as poly(acrylonitrile) (PAN), polysulfone (PS) and a polyethersulfone polyarylate (PEPA) blend polymer. The purpose of the present study is to apply the TCPDM to evaluation of commercially available hollow-fiber dialysis membranes with asymmetrical structures by simplifying them to a double-layer membrane. The TCPDM is capable of estimating pore tortuosity of asymmetrical dialysis membranes having skin and supporting layers from data on membrane thickness, pore diameter, pure water permeability and water content. Values for diffusive permeability obtained by the TCPDM are in a good agreement with experimental data. This TCPDM model is useful for evaluation of not only homogeneous membrane but also asymmetrical membrane.     

Structural characterization of temperature-sensitive hydrogels by field emission scanning electron microscopy (FESEM)

The submicrometer structure of the temperature-sensitive hydrogels was observed by field emission scanning electron microscopy (FESEM), using synthesized hydrogels of different outer size and shape. The hydrogel structure strongly depends on the homogeneity of the polymer chains during the crosslinking process. A porous structure of the poly(vinyl-methyl-ether) (PVME) bulkgel, synthesized by electron beam irradiation of a concentrated polymer solution, was observed in the swollen state because the phase transitions temperature is acquired through the crosslinking process. Photo-crosslinking reaction of the poly(N-isopropylacrylamide) (PNIPAAm) copolymer in the dry state to form PNIPAAm thin films leads to a rather homogeneous structure. In the shrunk state both gels possess structure being more compact than in the swollen state. We also synthesized PVME and PNIPAAm gels with small outer dimensions in the range of some 100 nm. Heating of the thermo-sensitive polymer in diluted solutions collapses the polymer chains or aggregates. The crosslinking reaction (initiated by electron beam or UV irradiation) of these phase separated structures produces thermo-sensitive microgels. These microgel particles of PVME and PNIPAAm are spherical shape having diameters in the range of 30 - 500 nm.     

Melt mixing of polycarbonate with multiwalled carbon nanotubes: microscopic studies on the state of dispersion

The focus of the paper is to investigate several issues related to the state of dispersion of multiwalled carbon nanotubes (MWNTs) in a polycarbonate (PC) matrix. A masterbatch of PC-MWNT (15 wt.%) was diluted with different amounts of PC in a small scale conical twin screw extruder (DACA Micro Compounder) to obtain different compositions of MWNT. In this system, electrical measurements indicated percolation of MWNT between 1.0 and 1.5 wt.%. We report TEM and AFM investigations of the state of dispersion of MWNT, in the entire volume of the matrix, in selected composites with compositions below (1 wt.% MWNT) and above the percolation threshold (2 and 5 wt.% MWNT). In addition, it was investigated if surface segregation of MWNT and flow induced orientation of nanotubes within the extruded strands had been occurred. It is found that the nanotubes dispersed uniformly through the matrix showing no significant agglomeration in the compositions studied. TEM micrographs seem to be able to detect the percolated structure of the carbon nanotubes. Furthermore, by comparing AFM micrographs from the core region and near to surface region no evidence of segregation or depletion of MWNT at the surface of the extruded strand was found. Comparison of TEM and AFM micrographs on surfaces cut along and perpendicular to the strand direction led to the conclusion that no preferred alignment had occurred as a result of extrusion. Aside from TEM technique, AFM is shown to be suitable to characterize the state of nanotube dispersion along with the issue of surface segregation and orientation of the nanotubes.     

Morphological characterization of poly(phenylacetylene) nanospheres prepared by homogeneous and heterogeneous catalysis

Scanning electron microscopy characterization of the materials obtained by homogeneous and heterogeneous catalytic polymerization of phenylacetylene is described. The catalysts used are β‐dioxygenato rhodium(I) complexes. The effects of the reaction medium, presence of a cocatalyst and the type of catalysis (homogeneous or heterogeneous) on the morphology of the polymers obtained have been studied and discussed. Using a supported complex at 0 °C, nanoparticles with a diameter distribution as narrow as 30 to 70 nm were obtained. Polymer nanopowders were found to be unaffected by ageing. Copyright © 2003 John Wiley & Sons, Ltd.     

钯纳米线电极的制备及其应用于乙醇的电化学氧化研究

纳米线作为纳米科学领域中的重要一员,因其优异的光学、电学及磁学等特性引起了凝聚态物理学界、化学界以及材料科学界科学家们的极大关注,并己成为当今纳米科技研究的热点领域[1].纳米线的制备方法有多种,本文提及的模板法制备纳米线结构技术是20世纪90年代初发展起来的一种既经济又简便实用的新工艺[2].     

Secondary electron contrast modulation in SU‐8 photoresist films exposed holographically

We report a Secondary Electron (SE) contrast modulation observed in scanning electron microscope photographs of the cross‐section of SU‐8 photoresist films exposed holographically. The modulation occurs along the whole depth of the sample and its contrast disappears when the samples are submitted to the post exposure bake (PEB). Diffraction and atomic force microscopy measurements of the samples were performed before and after PEB to investigate this modulation. The results indicate that this SE emission contrast modulation comes from the spatial chemical modulation generated by the photolysis during the exposure of the SU‐8 films. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 226–230, 2010