锂硫电池电解质研究进展

锂硫电池由于其高能量密度(理论高达2600 Wh/kg)、低成本、环境友好等优点而广受关注. 但是锂硫电池仍存在正极活性物质利用率低、循环性能差等问题. 造成这些问题的主要原因是易溶于有机电解液的中间产物聚硫锂Li₂S_n (4≤n≤8)和不溶于有机电解液的硫化锂造成的. 简要介绍了锂硫电池体系的主要问题,并结合本研究小组的研究,对锂硫电池用电解质体系从有机电解液组成、电解液添加剂、聚合物电解质和无机固体电解质等方面进行了详细的综述,最后对电解质的发展前景进行了展望.     

聚合物固态锂电池电解质/负极界面

动力电池领域对锂二次电池的能量密度和安全性提出了更高要求,研究高能量密度固态锂电池对发展新能源产业具有重要意义。相比传统的有机电解液锂离子电池,采用聚合物固体电解质的聚合物固态锂电池不但具有明显提升的安全性,而且能够匹配高容量电极材料,实现能量密度的有效提升。聚合物固态锂电池是最有前景的锂二次电池之一,然而聚合物固体电解质与锂负极间仍存在严重的界面副反应、锂负极表面易生长枝晶等问题。近年来,通过电解质成分调控、电解质力学性能提升、电解质/锂负极界面调控和匹配三维锂负极等手段,聚合物基固态锂电池性能明显提升。基于此,本文介绍了常见的聚合物固体电解质及其与锂负极间的界面挑战,从添加无机填料、使用高强度基底膜、分级层状结构设计、构筑界面缓冲层、交联网络设计以及固态锂负极保护等几个方面综述了提升聚合物基电解质/锂负极界面稳定性的最新研究成果,最后对解决聚合物固体电解质/锂负极界面兼容性的研发方向和发展趋势进行了展望。     

增塑剂对聚合物电解质锂离子电池性能的影响

锂电子;碳纤维;增塑剂对聚合物电解质锂离子电池性能的影响     

锂金属电池用三维半互穿网络聚合物电解质的制备

锂金属电池作为下一代高比能量电池技术受到人们越来越广泛的关注。然而由锂枝晶生长引发的安全问题是锂金属电池商业化面临的最大挑战之一。具有高锂离子迁移数和离子电导率的聚合物电解质是抑制锂枝晶生长的重要策略之一。本文将季戊四醇四丙烯酸酯和自由基引发剂AIBN添加至商业化电解液中,采用具有单离子传导功能的多孔聚合物电解质为锂金属电池的电解质隔膜,通过在电池内部发生热诱导原位聚合制备三维半互穿网络单离子传导聚合物电解质,达到提高电解质隔膜离子电导率和机械拉伸性能,以及有效抑制锂枝晶生长的目的。通过该策略的实施,成功获得了室温离子电导率0.53 mS·cm^-1和锂离子迁移数0.65的良好结果。应用于锂金属电池,证明该电解质能够有效抑制锂枝晶的生长和倍率性能的提高,为锂金属电池的开发提供了良好的解决路径。     

锂离子电池固态电解质的研究进展

和传统电解液相比,固态电解质热稳定性好,电位窗高,力学性能好且对环境友好;更重要地,由固态电解质组成的锂离子电池能量密度比传统锂离子电池更高,因而成为当前研究的热点。综述了几种主要固态电解质,包括无机固体电解质、固态聚合物电解质、凝胶电解质及复合型电解质的优势、研究进展以及面临的问题,并展望了未来固态电解质的发展趋势。     

Self-Repairable and Flexible Polymer Network Electrolyte with Enhanced Lithium-Ion Conduction for Lithium Metal Batteries

Developing high-performance functional polymer-based electrolytes is important for realizing next generation safe lithium metal batteries. In this study, a new type of quasi-solid polymer network electrolyte (SIPH-x-y%) was prepared by combining synthesized polymer network (SIPH) containing urethane bond linked ionic liquids (ILs), polyethylene glycol (PEG), and disulfide bond moieties, lithium bis(trifluoromethanesulfonyl)imide salt (LiTFSI), and glyme type additive. It was found that SIPH-20-40% was mechanically flexible, self-healable, and showed high ionic conductivity of 2.67×10⁻⁴ S cm⁻¹. Also, SIPH-20-40% possesses a high lithium ion transference number of 0.43 and good electrochemical stability. These properties enabled the SIPH-20-40% electrolyte membrane to support Li/Li symmetrical cell to cycle stably during long term Li plating and stripping. The Li/SIPH-20-40%/LFP showed high delivered specific capacity and good stability (166.1 mAh g⁻¹ after 106 cycles at 0.2 C). Such glyme doped polymer network electrolyte provides new experimental findings for developing polymer-based electrolyte with excellent mechanical integrity and battery related properties.     

Osmotic Coefficients and Activity Coefficients of Nonaqueous Electrolyte Solutions. Part 4. Lithium Bromide, Tetrabutylammonium Bromide, and Tetrabutylammonium Perchlorate in Acetone

Vapor pressure lowering by the addition of lithium bromide (0.03–0.8m), tetrabutylammonium bromide (0.01–0.8m), and tetrabutylammonium perchlorate (0.02–3.6m) to acetone was measured at 25°C with high precision. The experimental data of the corresponding osmotic coefficients are compared to those obtained by the use of Pitzer equations and chemical model calculations. Mean activity coefficients are derived from the osmotic coefficients.     

基于PEO的复合聚合物电解质的研究进展

从填料对聚合物电解质性能的影响、复合聚合物电解质性能的影响因素、聚合物电解质的结构和复合聚合物电解质的应用四方面综述了基于聚氧化乙烯（PEO）的复合聚合物电解质研究的最新进展。聚合物中加入纳米级无机填料可提高聚合物电解质的机械强度、电导率和锂／电解质界面的稳定性。     

Studies on the Catalysis of Ene Reactions by Lithium Perchlorate in Different Solvents

Abstract

The catalytic effect of lithium perchlorate on ene reaction of cis-cyclooctene with diethyl azodicarboxylate, 4-phenyl-1,2,4-triazoline-3,5-dione and the metallo-ene reaction of diallyldibutyltin with diethyl azodicarboxylate has been studied in different solvents like acetonitrile, acetone, diethyl ether, dimethylformamide and ethyl acetate.     

含烷氧磺酸锂盐及对称星形醚的聚环氧乙烷基聚合物电解质的制备及电化学性能

合成了低聚度烷氧磺酸锂盐（LiSA(EO)n)和对称星形醚（STEO）增塑剂,并制备了聚环氧乙烷（PEO）基聚合物电解质。 研究了PEO16+LiSA(EO)n体系的锂离子迁移数和电导率与锂盐结构的关系,实验结果表明,LiSA(EO)n代替LiClO4作为锂盐时,其电导率得到提高,而且聚合物电解质的锂离子迁移数随着烷氧磺酸锂盐阴离子体积的增大而增加,并且其中PEO16+LiSA(EO)2体系的锂离子迁移数达到0.35。 STEO可明显地提高PEO16-LiSAEO-STEO体系的电导率,PEO16-LiSAEO-20%STEO室温电导率可达到0.5×10-4 S/cm。 通过DSC实验结果表明,STEO的加入,可有效降低聚合物电解质体系的熔融温度和结晶度,PEO16-LiSAEO-20%STEO电化学稳定窗口在4.4 V以上,可满足锂电池的应用要求。     

Preparation of Aminovinyl Phosphonates by Four-Component Aminoalkylation of Aldehydes Mediated by Lithium Perchlorate

Several aminovinyl phosphonates were prepared in good yield by four-component aminoalkylation of aldehydes with diethyl(trimethylsilyl)amine, triethylphosphite and dimethyl acetylenedicarboxylate mediated by a 5 molar solution of lithium perchlorate in diethyl ether.     

Catalysis by Lithium Perchlorate Enables Double-Conjugate Addition of Electron-Deficient Maleimides to 2-Aminopyridines and 2-Aminothiazoles

Lithium perchlorate has been found to catalyze the conjugate addition of maleimides with 2-aminopyridines and 2-aminothiazoles. The reaction proceeds under mild conditions leading to the corresponding double adducts in good yields. A plausible mechanism of this reaction has been proposed.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications ^® to view the free supplemental file.     

Vibrational Spectroscopic Study on Ion Solvation and Association of Lithium Perchlorate in 4-Methoxymethyl-ethylene Carbonate

Solvation interaction and ion association in solutions of lithium perchlorate/4-methoxymethyl-ethylene carbonate （MEC） have been studied by using Infrared and Raman spectra as a function of concentration of lithium perchlorate. The splitting of ring deformation band and ring ether asymmetric stretching band, and the change of carbonyl stretching band suggest that there should be a strong interaction between Li^＋ and the solvent molecules, and the site of solvation should be the oxygen atom of carbonyl group. The apparent solvation number of Li^＋ was calculated by using band fitting technique. The solvation number was decreased from 3.3 to 1.1 with increasing the concentration of LiClO4/MEC solutions. On the other hand, the band fitting for the ClO4^- band revealed the presence of contact ion pair, and free ClO4^- anion in the concentrated solutions.     

锂离子电池高电压电解液

开发高电压正极材料是发展高能量密度锂离子电池的重要途径之一。常规电解液在高电压下容易与正极材料表面发生副反应,影响高电压正极材料性能的发挥,因此,高电压电解液引起了人们广泛的关注。本文主要从新型溶剂体系和常规碳酸酯溶剂体系两方面对锂离子电池高电压电解液进行综述与评价,提出了现有电解液的不足及面临的问题。从电解液溶剂分子设计理论入手,分析了砜类溶剂、腈基溶剂和离子液体等新型溶剂作为高压电解液溶剂的优缺点,同时探讨了不同种类添加剂在常规碳酸酯溶剂体系中的作用机理。此外,本文还介绍了理论计算方法在锂离子电池高电压电解液研究中的应用,并对其在设计新型高电压电解液中的应用前景进行了展望。     

A Vibrational Spectroscopic Study of Ion Solvation in Lithium Perchlorate/Propylene Carbonate Electrolyte

Abstract

The infrared (IR) and Raman spectra of propylene carbonate (PC) containing various concentrations of LiClO₄ have been measured and analyzed. The difference in spectra of PC with and without LiClO₄ was attributed to the interaction of the PC molecules and lithium ions. This interaction occurs mainly on the carbonyl oxygen atom of the PC molecule. The ring deformation, symmetric ring deformation, carbonyl stretching and stretching of ring oxygens for PC are sensitive to this interaction. The solvation number of Li⁺ is also calculated. On the other hand, the structure of the ClO^? ₄ is also affected by PC molecule, forming the solvent separated ion pairs.     

锂空气电池非水基电解液的优化与研究进展

锂空气电池是介于燃料电池和锂电池之间的一种新一代高性能绿色二次电池, 其理论比能量高达11140 Wh/kg (Li), 是锂离子电池的6～9倍, 同时具有输出电压稳定、环境友好等优点, 应用前景广阔. 电解液是电池中重要的组成部分, 在决定电池的电化学性能方面起着至关重要的作用. 综述了锂空气电池中有机电解液、离子液体和固态电解质等三种非水基电解质的研究进展, 系统阐述了各电解液不同化学性质(电化学稳定性、离子导电率、极性)、物理性质(如介电常数、黏度、氧气溶解度、吸湿性)和物理化学性质(对阴极材料的浸润能力等)对锂空气电池放电比容量、大电流放电能力和循环性能的影响, 并对其未来的发展方向进行了展望.     

锂磷氧氮(LiPON)薄膜电解质和全固态薄膜锂电池研究

采用电子束热蒸发Li₃PO₄与氮等离子体辅助相结合的方法制备了含氮磷酸锂(LiPON)电解质薄膜,已测得该非晶态电解质薄膜在温度为300K时的离子导电率为6.0×10^-7 S/cm,电子电导率低于10^-10 S/cm,电化学稳定窗口为5.0V.以脉冲激光沉积法(PLD)制备的非晶态Ag_0.5V₂O₅薄膜为阴极,真空热蒸发法制备的金属锂为阳极,LiPON薄膜为电解质,成功地制备了一个新的Li/LiPON/Ag_0.5V₂O₅全固态薄膜锂电池.该电池以14μA/cm²电流充/放电时,首次放电容量达到62 μAh·cm^-2·μm^-1,10次循环后容量衰减缓慢,衰减率约为0.2%,循环寿命达到550次以上.     

旋涂法制备PEO-PAN-PMMA三组分共混凝胶聚合物电解质

随着新能源产业和储能产业的快速发展,二次电池的安全性和能量密度要求越来越高.而传统的液态锂电池使用易燃的电解液,所以存在较大的安全隐患.因此固态锂电池由于其较高的安全性和能量密度受到越来越多人的关注.目前困扰固态电池应用的主要问题是其离子电导率和电极电解质界面问题.固态电解质是固态电池的关键材料.因此开发高离子电导率的固态电解质是开发固态电池的关键.在本工作中,作者成功通过旋涂法制备聚乙二醇-聚丙烯腈-聚甲基丙烯酸甲酯（PEO-PAN-PMMA）凝胶电解质.PEO-PAN-PMMA聚合物薄膜为均匀透明的,具有较高的吸附率,且热稳定性较好,在380℃下保持稳定.通过浸泡电解液可以得到性能优异的凝胶电解质.该凝胶电解质具有较高的离子电导率,室温离子电导率为0.4 mS/cm,而且电化学窗口较宽,在0～4.2 V之间化学性能较为稳定,界面稳定性较好.组装成Li//PEO-PAN-PMMA凝胶电解质//LiCoO₂电池之后,正极首圈放电容量为129.8 mAh/g,循环100周,正极放电容量剩余119.51 mAh/g,在0.1 C、0.2 C、0.5 C和1 C倍率下循环,正极放电容量分别为129.8 mAh/g,99.5 mAh/g,86.1 mAh/g和64 mAh/g.     

Regulation of Cathode‐Electrolyte Interphase via Electrolyte Additives in Lithium Ion Batteries

As the power supply of the prosperous new energy products, advanced lithium ion batteries (LIBs) are widely applied to portable energy equipment and large‐scale energy storage systems. To broaden the applicable range, considerable endeavours have been devoted towards improving the energy and power density of LIBs. However, the side reaction caused by the close contact between the electrode (particularly the cathode) and the electrolyte leads to capacity decay and structural degradation, which is a tricky problem to be solved. In order to overcome this obstacle, the researchers focused their attention on electrolyte additives. By adding additives to the electrolyte, the construction of a stable cathode‐electrolyte interphase (CEI) between the cathode and the electrolyte has been proven to competently elevate the overall electrochemical performance of LIBs. However, how to choose electrolyte additives that match different cathode systems ideally to achieve stable CEI layer construction and high‐performance LIBs is still in the stage of repeated experiments and exploration. This article specifically introduces the working mechanism of diverse electrolyte additives for forming a stable CEI layer and summarizes the latest research progress in the application of electrolyte additives for LIBs with diverse cathode materials. Finally, we tentatively set forth recommendations on the screening and customization of ideal additives required for the construction of robust CEI layer in LIBs. We believe this minireview will have a certain reference value for the design and construction of stable CEI layer to realize desirable performance of LIBs.