Thermal Characterization of Polymeric Plaster Composites

Plaster composites have been developed by the authors, aiming the manufacture of plasterboards and other building materials with enhanced properties. Polymeric plaster composites,obtained from hydration of commercial plaster of Paris with aqueous solutions of a commercial polyester, were characterized by thermogravimetry (TG) and differential thermal analysis (DTA). A method using derivative thermogravimetry (DTG) was developed to determine the polymer content in the composites and its distribution. Samples prepared conventionally by hydration of plaster of Paris with water were used as reference. Independently of the initial solution concentration, all the composites show an even distribution of the polymer, which presence enhances the composite mechanical strength. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal stability and thermokinetics studies on silicone ceramer coatings: Part 1-inert atmosphere parameters

Two silicone ceramer coatings were synthesized and studied according to their thermal stability, using Fourier Transformation Infra-red (FTIR) spectroscopy. Differential thermal analysis was conducted on a liquid precursor to the coatings to study the phase transformations occurring in the material as the temperature was altered. The kinetics of the thermal degradation of coatings was analyzed; and the corresponding thermokinetics parameters were determined using Friedman's method, the Flynn-Wall-Ozawa method and the American standard test method E698. A thermogravimetric analysis was conducted on the liquid precursors as well as on the solidified coatings at various heating rates. The gaseous products that were obtained as a result of pyrolysis were analyzed employing an attached FTIR spectrometer.     

中药口服固体制剂原辅料近红外光谱数据库的构建及应用

建立了中药口服固体制剂原辅料近红外(NIR)光谱数据库,采用模式识别方法研究了NIR光谱数据在物料分类和物性预测中的应用。使用便携式近红外光谱仪快速测量149批原辅料粉末的NIR漫反射光谱数据,并录入iTCM数据库。利用主成分分析(PCA)法探究NIR光谱数据对已知结构物料的分类能力,采用偏最小二乘(PLS)法研究了NIR光谱对原辅料物性参数和直接压片片剂性能的预测能力。经标准正态变量变换(SNV)+Savitzky-Golay(SG)平滑+一阶导数处理后的NIR光谱数据对微晶纤维素、乳糖、乙基纤维素、交联聚维酮和羟丙基甲基纤维素这5类辅料的区分能力较好。NIR光谱数据与原辅料粉末粒径、密度和吸湿性的相关性较强。NIR光谱信息作为物料物理性质的补充,可提高粉末直接压片片剂性能预测模型的性能。NIR光谱数据是iTCM数据库物性参数数据的补充,物性参数与NIR光谱数据的结合能更全面地表征原辅料的性质。     

Thermal Characterization of Materials Using Evolved Gas Analysis

Thermal analysis combined with evolved gas analysis has been used for some time. Thermogravimetry (TG) coupled with Fourier transform infrared (FTIR) spectroscopy(TG/FTIR), Thermogravimetry (TG) coupled with mass spectrometry (TG/MS), and Thermogravimetry (TG) coupled with GC/MS offers structural identification of compounds evolving during thermal processes. These evolved gas analysis (EGA) techniques allow to evaluate the chemical pathway of the degradation reaction by determining the decomposition products. In this paper the TG/FTIR, TG/MS, and Pyrolysis/GC-MS systems will be described and their applications in the study of several materials will be discussed, including the analysis of the degradation mechanisms of organically modified clays, polymers, and coal blends. This revised version was published online in July 2006 with corrections to the Cover Date.     

New Rapid Assay for Nafcillin by Spectrofluorimetry in Pharmaceutical Dosage

Abstract

A method for the spectrofluorimetric determination of nafcillin is proposed (λ_ex = 226 nm, λ_em = 366 nm), for concentrations between 0.10 and 1.0 μg mL^?1. The method was performed in ethanol/water medium (30% V/V), at apparent pH 6.0 provided by adding of phosphate buffer solution with pH = 6.20.

The obtained values of detection and determination limits are 0.016 and 0.054 μg mL^?1, respectively.

The method was successfully applied to assay a commercial injection containing nafcillin sodium monohydrate.     

Synthesis of Crosslinked Polymeric Particles and Their Application for the Superhydrophobic Surfaces Using Structured Polymeric Colloids

In this study, structured colloids such as self-organized supraparticles of polymeric lattices were used as coating materials for the fabrication of superhydrophobic surfaces. Crosslinked polystyrene (PS) nanospheres were synthesized using divinylbenzene as crosslinker to prevent the organic particles from being dissolved in toluene solvent. After evaporation-driven self-assembly of PS particles inside the toluene emulsions, supraparticles of PS lattices were fabricated and coated on glass substrate, followed by the plasma treatment using CHF₃ as gas source for fluorination process. After the fluorine treatment using plasma, superhydrophobicity was assessed by measuring water contact angle. The morphologies of supraparticles and the structure of coating film were observed using scanning electron microscope, and the elemental compositions of the coating films were detected by using X-ray photoemission spectroscopy (XPS) technique. We believe that the lotus effect from the supraparticles with different two length scales made crucial contribution to the generation of superhydrophobicity after plasma treatment for the formation of superhydrophobic surfaces.     

Thermal Stability and Degradation Mechanism for Two Main-Chain Liquid Crystal Polyesters a TG-MS Study

The thermal stabilities of two thermotropic liquid crystal polyesters were analysed by means of thermogravimetric analysis (TG), as a function of the chemical structure of the aliphatic spacer between the aromatic-triad mesogenic units. TG was combined with mass spectrometry to confirm that the degradation mechanism previously observed in a Fourier transform infrared study of the degrading polymers follows a β-cis-elimination process. This revised version was published online in July 2006 with corrections to the Cover Date.     

制药工程专业药物分析实践教学模式的探索

针对目前制药工程专业药物分析实践教学中存在的缺乏工科性、与生产联系少等问题,通过实践教学改革和查阅文献,从校内实验、校内实训和校外实习3个方面对药物分析的实践教学模式进行了探索,强调该课程的综合性和工科特色,增强了学生实践能力。     

Synthetic and Thermal Studies of Polymeric Chelates of Some Bis-Biurets with First Transition Series Metals

Some new coordination polymers have been synthesized by combining adipyl bis-biuret and azelyl bis-biuret with metals of first transition series viz Mn(II), Co(II), Ni(II), Cu(II) and Zn(II). They were characterized by elemental analysis, infrared and reflectance spectral and magnetic studies. A detailed thermal study was carried out and thermal stability compared. The results obtained have been discussed.This revised version was published online in November 2005 with corrections to the Cover Date.     

Spectrophotometric Determination of Cefadroxil and Metyrosine in Dosage Forms

Abstract

A simple and sensitive spectrophotometric method is described for the determination of cefadroxil and metyrosine in pure form and in pharmaceutical formulations. The method is based on reacting these drugs with 4-aminoantipyrine (AAP) in the presence of an alkaline oxidising agent. The coloured products were measured spectrophotometrically at 500 nm and 470 nm for cefadroxil and metyrosine, respectively. Beer's law was obeyed over the concentration range 1-28 and 2-44 μg ml^-1 for cefadroxil monohydrate and metyrosine, respectively. The molar ratio in both cases was established and a proposal for the reaction pathway was suggested. The percentage recoveries obtained were in accordance with those given by the reference methods.     

FTIR-PAS analysis of silica gel modified with amines for the treatment of natural gases contaminated with sulphur compounds

The quantitative analysis of organic microsamples [vinylite (PVC-PVA) cellulose-nitrate and polyamide] on Al-foils was performed with good precision (rel. standard deviation 1.04% to 12.1%) after calibration of their main IR-bands with relative conductometric techniques. It was shown that the lower detection limit using the 15×Cassegrain objective was 1m and that the linear range of the calibration curves was limited by a deviation of Beer's law atA>1.2 due to the reststrahlen-effect.     

Stability-Indicating HPTLC Method for the Determination of Tamsulosin in Pharmaceutical Dosage Forms

A simple, sensitive, selective, precise and stability indicating high-performance thin-layer chromatographic method was developed for the determination of tamsulosin (TAM) in bulk and tablet formulation. Validation was carried out in compliance with International Conference on Harmonization guidelines. The method employed thin-layer chromatography aluminium plates pre-coated with silica gel 60F₂₅₄ as the stationary phase and the mobile phase consisted of acetonitrile/methanol/dichloromethane (2.0: 1.0: 2.0, v/v/v). This solvent system was found to give compact spots for tamsulosin (R _f = 0.27 ± 0.02). Densitometric analysis of TAM was carried out in the absorbance mode at 286 nm. Linear regression analysis showed good linearity (r ² = 0.9993) with respect to peak area in the concentration range of 300–800 ng per band. The method was validated for precision, accuracy, ruggedness and recovery. Limits of detection and quantitation were 8.49 and 25.72 ng per band, respectively. TAM was subjected to acid and alkali hydrolysis, oxidation, photo degradation, dry heat and wet heat treatment. The drug underwent degradation under acidic, basic and photolytic conditions. The degraded products were well separated from the pure drug. Statistical analysis proved that the developed method, used for quantification of TAM as a bulk drug and present in pharmaceutical tablets, was reproducible and selective.

     

A Simple TLC Method for Analysis of Fluconazole in Pharmaceutical Dosage Forms

JPC – Journal of Planar Chromatography – Modern TLC - Use of an internal standard is proposed in this thin-layer chromatographic determination of fluconazole in tablet and capsule...     

Stability-Indicating HPTLC Method for the Determination of Tamsulosin in Pharmaceutical Dosage Forms

A simple, sensitive, selective, precise and stability indicating high-performance thin-layer chromatographic method was developed for the determination of tamsulosin (TAM) in bulk and tablet formulation. Validation was carried out in compliance with International Conference on Harmonization guidelines. The method employed thin-layer chromatography aluminium plates pre-coated with silica gel 60F₂₅₄ as the stationary phase and the mobile phase consisted of acetonitrile/methanol/dichloromethane (2.0: 1.0: 2.0, v/v/v). This solvent system was found to give compact spots for tamsulosin (R _f = 0.27 ± 0.02). Densitometric analysis of TAM was carried out in the absorbance mode at 286 nm. Linear regression analysis showed good linearity (r ² = 0.9993) with respect to peak area in the concentration range of 300–800 ng per band. The method was validated for precision, accuracy, ruggedness and recovery. Limits of detection and quantitation were 8.49 and 25.72 ng per band, respectively. TAM was subjected to acid and alkali hydrolysis, oxidation, photo degradation, dry heat and wet heat treatment. The drug underwent degradation under acidic, basic and photolytic conditions. The degraded products were well separated from the pure drug. Statistical analysis proved that the developed method, used for quantification of TAM as a bulk drug and present in pharmaceutical tablets, was reproducible and selective.     

Stability-Indicating TLC Method for the Determination of Dutasteride in Pharmaceutical Dosage Forms

A simple, sensitive, selective, precise and stability-indicating thin-layer chromatographic method for determination of dutasteride both as a bulk drug and as pharmaceutical tablets was developed and validated as per the International Conference on Harmonization guidelines. The method employed thin-layer chromatography aluminium plates precoated with silica gel 60F₂₅₄ as the stationary phase and the mobile phase consisted of acetonitrile:methanol:dichloromethane in the ratio of 2.0:1.0:2.0, v/v/v. This solvent system was found to give compact spots for dutasteride (R _f value of 0.64 ± 0.02). Densitometric analysis of dutasteride was carried out in the absorbance mode at 244 nm. The linear regression analysis data for the calibration plots showed good linear relationship with r = 0.9943 with respect to peak area in the concentration range of 100–600 ng per band. The method was validated for precision, accuracy, ruggedness and recovery. The limits of detection and quantitation were 7.54 and 22.85 ng per band, respectively. Dutasteride was subjected to acid and alkali hydrolysis, oxidation, photo degradation, dry heat and wet heat treatment. The drug undergoes degradation under acidic, basic conditions, photolytic, oxidative and upon wet and dry heat treatment. The degraded products were well separated from the pure drug. The statistical analysis proves that the developed method for quantification of dutasteride as bulk drug and from pharmaceutical tablets is reproducible and selective. As the method could effectively separate the drug from its degradation products, it can be employed as stability-indicating.     

Thermal stability of the ­spironaphthoxazine colored form in ­polymeric siloxanes

In order to improve the thermal stability of colored merocyanine formed by the photochromic reaction of spironaphthoxazine, the spiro compound was incorporated in polymeric siloxanes. They are liquid poly(methylphenylsiloxane) and solid methyl‐ or phenyl‐siloxane resins prepared by the hydrolysis and condensation reactions of the corresponding di‐ or tri‐ethoxysilane. To the polymers the spirooxazine moiety is­bonded covalently. Higher stability of the colored form was not observed in the liquid polysiloxane, but in the solid resins. The phenyl substituent in the resin is more effective than the methyl one for stabilization, suggesting that the bulky substituent in the vicinity of the spirooxazine moiety is important as well as stiff polymer matrices. The phenylsiloxane resin with the spirooxazine moiety was enclosed in rigid sol–gel silica, but a further improvement of the thermal stability was not observed. Copyright © 2002 John Wiley & Sons, Ltd.     

Thermal Characterization of Dolomites

The decomposition behaviour of dolomite samples has been carried out by simultaneous DTA-TG experiments. Dolomite samples could be classified broadly into two categories as regular and iron-bearing dolomites based on DTA decomposition temperatures. The mass% FeO of all the dolomite samples was identified by DTA and the results are confirmed by atomic absorption spectrophotometer experiments. This revised version was published online in July 2006 with corrections to the Cover Date.     

Polymer Blend for Electrolyte and Electrode Coatings

Summary: The thermal and morphological properties of PEO/copolyether electrolyte and carbon black composite have been studied. A copolyether poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol) bis(2-aminopropyl ether) was used at 20 wt.-% in relation to PEO in order the improve the carbon black dispersion through interaction with the amino end capped function. The polymer matrix presented semicrystalline structure and the addition of LiClO₄ and carbon black decreases significantly the crystallinity of the system. Sub-micrometric dispersion of carbon black was observed. The conductivity results as a function of temperature exhibited a typical VTF behaviour for the electrolyte. Almost constant conductivities of 2 × 10⁻⁴ S · cm⁻¹ were observed for the composite with 5 wt.-% of carbon black, in the range of temperature between 35 and 95 °C, which indicates a significantly contribution of electronic conduction.