Programmable Engineering of a Biosensing Interface with Tetrahedral DNA Nanostructures for Ultrasensitive DNA Detection

Self‐assembled DNA nanostructures with precise sizes allow a programmable “soft lithography” approach to engineer the interface of electrochemical DNA sensors. By using millimeter‐sized gold electrodes modified with several types of tetrahedral DNA nanostructures (TDNs) of different sizes, both the kinetics and thermodynamics of DNA hybridization were profoundly affected. Because each DNA probe is anchored on an individual TDN, its lateral spacing and interactions are finely tuned by the TDN size. By simply varying the size of the TDNs, the hybridization time was decreased and the hybridization efficiency was increased. More significantly, the detection limit for DNA detection was tuned over four orders of magnitude with differentially nanostructured electrodes, and achieved attomolar sensitivity with polymeric enzyme amplification.     

电化学DNA生物传感器*

对特异DNA序列的检测在基因相关疾病的诊断、军事反恐和环境监测等方面均具有非常重要的意义,DNA传感器的研究就是为了满足对特异DNA序列的快速、便捷、高灵敏度和高选择性检测的需要。近年来涌现出了多种传感策略,根据检测方法的不同可以大致分为光学传感器、电化学传感器、声学传感器等。由于电化学检测方法本身所具有的灵敏、快速、低成本和低能耗等特点,电化学DNA传感器已成为一个非常活跃的研究领域并在近几年中得到了快速发展。本文概括了近年来在DNA传感器的重要分支——电化学DNA传感器领域内的一些重要进展,主要包括DNA探针在传感界面上的固定方法和各种电化学DNA杂交信号的检测方法。     

Direct Electrodeposition of Porous Gold Nanowire Arrays for Biosensing Applications

Nanochannel alumina templates are used as templates for fabrication of porous gold nanowire arrays by a direct electrodeposition method. After modification with glucose oxidase, a porous gold nanowire‐array electrode is shown to be an excellent electrochemical biosensor for the detection of glucose. The picture shows an SEM image of a nanowire array after removal of the alumina template by acid dissolution.

     

Transfer-printing of highly aligned DNA nanowires

We developed a simple method of reproducibly creating highly aligned DNA nanowires without any surface modifications or special equipment. Stretched DNA molecules initially present on the PDMS sheet were transferred onto another surface using transfer-printing (TP). Fluorescent microscopic and atomic force microscopic images revealed that many DNA molecules were highly aligned on surfaces after TP. Furthermore, it was also possible to realize the two-dimensional assembly of DNA nanowires by repeating TP.     

3,4,9,10‐Perylenetetracarboxylic Acid/Hemin Nanocomposites Act as Redox Probes and Electrocatalysts for Constructing a Pseudobienzyme‐Channeling Amplified Electrochemical Aptasensor

A simple wet‐chemical strategy for the synthesis of 3,4,9,10‐perylenetetracarboxylic acid (PTCA)/hemin nanocomposites through π–π interactions is demonstrated. Significantly, the hemin successfully conciliates PTCA redox activity with a pair of well‐defined redox peaks and intrinsic peroxidase‐like activity, which provides potential application of the PTCA self‐derived redox activity as redox probes. Additionally, PTCA/hemin nanocomposites exhibit a good membrane‐forming property, which not only avoids the conventional fussy process for redox probe immobilization, but also reduces the participation of the membrane materials that act as a barrier of electron transfer. On the basis of these unique properties, a pseudobienzyme‐channeling amplified electrochemical aptasensor is developed that is coupled with glucose oxidase (GOx) for thrombin detection by using PTCA/hemin nanocomposites as redox probes and electrocatalysts. With the addition of glucose to the electrolytic cell, the GOx on the aptasensor surface bioelectrocatalyzed the reduction of glucose to produce H₂O₂, which in turn was electrocatalyzed by the PTCA/hemin nanocomposites. Cascade schemes, in which an enzyme is catalytically linked to another enzyme, can produce signal amplification and therefore increase the biosensor sensitivity. As a result, a linear relationship for thrombin from 0.005 to 20 nM and a detection limit of 0.001 nM were obtained.     

Vertically well aligned P-doped ZnO nanowires synthesized on ZnO-Ga/glass templates

Vertically well aligned P-doped ZnO nanowires were prepared on ZnO-Ga/glass templates at 550 degrees C by reactive evaporation without metal catalysts and the nanowires were found to be single crystalline with the würtzite structure, oriented in the c-axis direction; the P-doping shortened the physical lengths of the ZnO nanowires without changing their diameter, and furthermore, the introduction of P atoms resulted in a much weaker and broader ZnO band edge emission.     

Low‐Background,Highly Sensitive DNA Biosensor by Using an Electrically Neutral Cobalt(II) Complex as the Redox Hybridization Indicator

An electrically neutral cobalt complex, [Co(GA)₂(phen)] (GA=glycollic acid, phen=1,10‐phenathroline), was synthesized and its interactions with double‐stranded DNA (dsDNA) were studied by using electrochemical methods on a glassy carbon electrode (GCE). We found that [Co(GA)₂(phen)] could intercalate into the DNA duplex through the planar phen ligand with a high binding constant of 6.2(±0.2)×10⁵ M ^?1. Surface studies showed that the cobalt complex could electrochemically accumulate within the modified dsDNA layer, rather than within the single‐stranded DNA (ssDNA) layer. Based on this feature, the complex was applied as a redox‐active hybridization indicator to detect 18‐base oligonucleotides from the CaMV35S promoter gene. This biosensor presented a very low background signal during hybridization detection and could realize the detection over a wide kinetic range from 1.0×10^?14 M to 1.0×10^?8 M , with a low detection limit of 2.0 fM towards the target sequences. The hybridization selectivity experiments further revealed that the complementary sequence, the one‐base‐mismatched sequence, and the non‐complementary sequence could be well‐distinguished by the cobalt‐complex‐based biosensor.     

Electronic aptamer-based sensors

The selection of aptamers-nucleic acids that specifically bind low-molecular-weight substrates or proteins-by the SELEX (systematic evolution of ligands by exponential enrichment) procedure has attracted recent efforts directed to the development of new specific recognition units. In particular, extensive activities have been directed to the application of aptamers as versatile materials for the design of biosensors. The Minireview summarizes the recent accomplishments in developing electronic aptamer-based sensors (aptasensors), which include electrochemical, field-effect transistor, and microgravimetric quartz crystal microbalance sensors, and describes methods to develop amplified aptasensor devices and label-free aptasensors.     

The application of boron-doped diamond electrodes in amperometric biosensors

Boron-doped diamond (BDD) electrodes outperform conventional electrodes in terms of high stability, chemical inertness, wide potential window and low background current. Combining the superior properties of BDD electrodes with the merits of biosensors, such as specificity, sensitivity, and fast response, amperometric biosensors based on BDD electrodes have attracted the interests of many researchers. In this review, the latest advances of BDD electrodes with different surfaces including hydrogen-terminated, oxygen-terminated, metal nanoparticles-modified, amine-terminated, and carboxyl-terminated thin films, and microelectrodes, for the construction of various biosensors or the direct detection of biomolecules were demonstrated. The future trends of BDD electrodes in biosensing were also discussed.     

Templateless assembly of molecularly aligned conductive polymer nanowires: a new approach for oriented nanostructures

Although oriented carbon nanotubes, oriented nanowires of metals, semiconductors and oxides have attracted wide attention, there have been few reports on oriented polymer nanostructures such as nanowires. In this paper we report the assembly of large arrays of oriented nanowires containing molecularly aligned conducting polymers (polyaniline) without using a porous membrane template to support the polymer. The uniform oriented nanowires were prepared through controlled nucleation and growth during a stepwise electrochemical deposition process in which a large number of nuclei were first deposited on the substrate using a large current density. After the initial nucleation, the current density was reduced stepwise in order to grow the oriented nanowires from the nucleation sites created in the first step. The usefulness of these new polymer structures is demonstrated with a chemical sensor device for H(2)O(2), the detection of which is widely investigated for biosensors. Finally, we demonstrated that controlled nucleation and growth is a general approach and has potential for growing oriented nanostructures of other materials.     

In situ electrochemical spectroscopy for boron-doped diamond electrode reactions: recent progress and perspectives

Over the past years, great attention has been given to the developments of boron-doped diamond (BDD) materials in various fields because of the advantages of electrochemical features, such as large potential range and low background current. This minireview aims to present the recent progress of in situ electrochemical spectroscopy for BDD electrode reactions. After a concise state of the widely used in situ electrochemical spectroscopy techniques, including in situ electrochemical Raman, infrared, and electron paramagnetic resonance spectroscopy, the current progress of BDD electrode reactions using in situ electrochemical spectroscopy has been summarized. Finally, challenges and perspectives for the tendency of the BDD study via in situ electrochemistry are provided, of which several potential electrochemical combined technologies relating to the mechanism exploration of BDD are proposed.     

基于新型纳米传感材料的DNA生物传感器的应用

DNA是构建纳米技术和生物传感技术新设备的良好构建体.DNA生物传感器由于具有灵敏度高、选择性好等特点,近年来获得了飞速发展.研究发现,金属纳米粒子(MNPs)、碳基纳米材料等一系列纳米材料在传感器设计中提高了电化学DNA传感器的传感性能.本文侧重介绍了场效应晶体管、石墨烯、碳纳米管等新型纳米传感材料,以及基于这些材料...     

Vertically Grown Few-Layer MoS2 Nanosheets on Hierarchical Carbon Nanocages for Pseudocapacitive Lithium Storage with Ultrahigh-Rate Capability and Long-Term Recyclability

Molybdenum disulfide (MoS₂) is an intensively studied anode material for lithium-ion batteries (LIBs) owing to its high theoretical capacity, but it is still confronted by severe challenges of unsatisfactory rate capability and cycle life. Herein, few-layer MoS₂ nanosheets, vertically grown on hierarchical carbon nanocages (hCNC) by a facile hydrothermal method, introduce pseudocapacitive lithium storage owing to the highly exposed MoS₂ basal planes, enhanced conductivity, and facilitated electrolyte access arising from good hybridization with hCNC. Thus, the optimized MoS₂/hCNC exhibits reversible capacities of 1670 mAh g⁻¹ at 0.1 A g⁻¹ after 50 cycles, 621 mAh g⁻¹ at 5.0 A g⁻¹ after 500 cycles, and 196 mAh g⁻¹ at 50 A g⁻¹ after 2500 cycles, which are among the best for MoS₂-based anode materials. The specific power and specific energy, which can reach 16.1 kW and 252.8 Wh after 3000 cycles, respectively, indicate great potential in high-power and long-life LIBs. These findings suggest a promising strategy for exploring advanced anode materials with high reversible capacity, high-rate capability, and long-term recyclability.     

Large-scale controllable patterning growth of aligned organic nanowires through evaporation-induced self-assembly

Organic one-dimensional nanostructures are attractive building blocks for electronic, optoelectronic, and photonic applications. Achieving aligned organic nanowire arrays that can be patterned on a surface with well-controlled spatial arrangement is highly desirable in the fabrication of high-performance organic devices. We demonstrate a facile one-step method for large-scale controllable patterning growth of ordered single-crystal C(60) nanowires through evaporation-induced self-assembly. The patterning geometry of the nanowire arrays can be tuned by the shape of the covering hats of the confined curve-on-flat geometry. The formation of the pattern arrays is driven by a simple solvent evaporation process, which is controlled by the surface tension of the substrate (glass or Si) and geometry of the evaporation surface. By sandwiching a solvent pool between the substrate and a covering hat, the evaporation surface is confined to along the edge of the solvent pool. The geometry of the formed nanowire pattern is well defined by a surface-tension model of the evaporation channel. This simple method is further established as a general approach that is applicable to two other organic nanostructure systems. The I-V characteristics of such a parallel, organic, nanowire-array device was measured. The results demonstrate that the proposed method for direct growth of nanomaterials on a substrate is a feasible approach to device fabrication, especially to the fabrication of the parallel arrays of devices.