Application of bifunctional Saccharomyces cerevisiae to remove lead(II) and cadmium(II) in aqueous solution

A magnetic adsorbent, EDTAD-functionalized Saccharomyces cerevisiae, has been synthesized to behave as an adsorbent for heavy metal ions by adjusting the pH value of the aqueous solution to make carboxyl and amino groups protonic or non-protonic. The bifunctional Saccharomyces cerevisiae (EMS) were used to remove lead(II) and cadmium(II) in solution in a batch system. The results showed that the adsorption capacity of the EMS for the heavy metal ions increased with increasing solution pH, and the maximum adsorption capacity (88.16 mg/g for Pb²⁺, 40.72 mg/g for Cd²⁺) at 10 °C was found to occur at pH 5.5 and 6.0, respectively. The adsorption process followed the Langmuir isotherm model. The regeneration experiments revealed that the EMS could be successfully reused.     

Synthesis of thiol-functionalized MCM-41 mesoporous silicas and its application in Cu(II), Pb(II), Ag(I), and Cr(III) removal

Thiol-functionalized MCM-41 mesoporous silicas were synthesized via evaporation-induced self-assembly. The mesoporous silicas obtained were characterized by X-ray diffraction (XRD), nitrogen adsorption–desorption analysis, Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The products were used as adsorbents to remove heavy metal ions from water. The mesoporous silicas (adsorbent A) with high pore diameter (centered at 5.27 nm) exhibited the largest adsorption capacity, with a BET surface area of 421.9 m² g^?1 and pore volume of 0.556 cm³ g^?1. Different anions influenced the adsorption of Cu(II) in the order NO₃ ^? < OAc^? < SO₄ ^2? < CO₃ ^2? < Cit^? < Cl^?. Analysis of adsorption isotherms showed that Cu²⁺, Pb²⁺, Ag⁺, and Cr³⁺ adsorption fit the Redlich–Peterson nonlinear model. The mesoporous silicas synthesized in the work can be used as adsorbents to remove heavy metal ions from water effectively. The removal rate was high, and the adsorbent could be regenerated by acid treatment without changing its properties.     

Studies on chelating adsorption properties of novel composite material polyethyleneimine/silica gel for heavy-metal ions

Firstly, the coordination processes of line-type polyethyleneimine with Cu²⁺, Cd²⁺ and Zn²⁺ were studied by using visible light absorption spectroscopy and chelation conductivity titration method, and the structures of the chelates were determined. Afterwards, polyethyleneimine (PEI) was grafted onto the surface of silica gel particles via the coupling effect of γ-chloropropyl trimethoxysilane (CP), and the novel composite adsorption material PEI/SiO₂ with strong adsorption ability towards heavy-metal ions was prepared. The chelating adsorption properties of PEI/SiO₂ for Cu²⁺, Cd²⁺ and Zn²⁺ were researched by both static (batch) and dynamic (flow) methods. The experiment results show that water-soluble polyamine PEI with line-type structure reacts with Cu²⁺, Cd²⁺ and Zn²⁺ easily and quantitatively, and water-soluble chelates with four ligands are formed. The composite material PEI/SiO₂ possesses very strong chelating adsorption ability for heavy-metal ions, and the saturated adsorption amount can reach 25.94 mg g⁻¹ and 50.01 mg g⁻¹ for Cu²⁺ under static and dynamic conditions, respectively. The isothermal adsorption data fit to Langmuir equation, and the adsorption is typical chemical adsorption with monomolecular layer. The adsorbing ability of PEI/SiO₂ towards the three kinds of the ions follows the order of Cu²⁺ > Cd²⁺ > Zn²⁺. The pH value has great influence on the sorption, and at pH 6-7, the adsorption capacity is the greatest. The fact that adsorption capacity increases with temperature rising indicates the adsorbing process of PEI/SiO₂ for metal ions is endothermic. As diluted hydrochloric acid is used as eluent, the adsorbed heavy-metal ions are eluted easily from PEI/SiO₂, and the regeneration and reuse without decreasing sorption for PEI/SiO₂ are demonstrated.     

Highly efficient simultaneous ultrasonic-assisted adsorption of Pb(II), Cd(II), Ni(II) and Cu (II) ions from aqueous solutions by graphene oxide modified with 2,2′-dipyridylamine: Central composite design optimization

In present work, a graphene oxide chemically modified with 2,2′-dipyridylamine (GO-DPA), was synthesized by simple, fast and low-cost process for the simultaneous adsorption of four toxic heavy metals, Pb(II), Cd(II), Ni(II) and Cu(II), from aqueous solutions. The synthesized adsorbent was characterized by FT-IR, XRD, XPS, SEM and AFM measurements. The effects of variables such as pH solution, initial ion concentrations, adsorbent dosage and sonicating time were investigated on adsorption efficiency by rotatable central composite design. The optimum conditions, specified as 8 mg of adsorbent, 20 mg L⁻¹ of each ion at pH 5 and short time of 4 min led to the achievement of a high adsorption capacities. Ultrasonic power had important role in shortening the adsorption time of ions by enhancing the dispersion of adsorbent in solution. The adsorption kinetic studies and equilibrium isotherms for evaluating the mechanism of adsorption process showed a good fit to the pseudo-second order and Langmuir model, respectively. The maximum adsorption capacities (Q_m) of this adsorbent were 369.749, 257.201, 180.893 and 358.824 mg g⁻¹ for lead, cadmium, nickel and copper ions, respectively. The removal performance of adsorbent on the real wastewater samples also showed the feasibility of adsorbent for applying in industrial purposes.     

Effect of Pendant Group Length Upon Metal Ion Complexation in Acetonitrile by Di-Ionized Calix[4]Arenes Bearing Two Dansyl Fluorophores

A series of three di-ionizable calix[4]arenes with two pendant dansyl (1-dimethylaminonaphthalene-5-sulfonyl) groups linked to the lower rims was synthesized. Structures of the three ligands were identical except for the length of the spacers which connected the two dansyl groups to the calix[4]arene scaffold. Following conversion of the ligands into their di-ionized di(tetramethylammonium) salts, absorption and emission spectrophotometry were utilized to probe the influence of metal cation (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Ag⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺) complexation in acetonitrile. Upon complexation with these metal cations, emission spectra underwent marked red shifts and quenching of the dansyl group fluorescence for the di-ionized ligand with the shortest spacer. A similar effect was noted for the di-ionized ligand with an intermediate spacer for all of the metal ions, except Ba²⁺. For the di-ionized ligand with the longest spacer, the metal cations showed different effects on the emission spectrum. Li⁺, Mg²⁺, Ca²⁺ and Ba²⁺ caused enhancement of emission intensity with a red shift. Other metal cations produce quenching with red shifts in the emission spectra. Transition metal cations interacted strongly with all three di-ionized ligands. In particular, Fe³⁺ and Hg²⁺ caused greater than 99% quenching of the dansyl fluorescence in the di-ionized ligands.     

Adsorption kinetics,isotherms, and thermodynamic studies for the adsorption of Pb<Superscript>2+</Superscript> and Hg<Superscript>2+</Superscript> metal ions from aqueous medium using Ti(IV) iodovanadate cation exchanger

In the current study, Ti(IV) iodovanadate cation exchanger (TIV) was synthesized and applied for the removal of Pb²⁺ and Hg²⁺ metal ions from the aqueous medium. The adsorption studies were performed by the batch techniques and adsorption parameters viz. contact time, pH, initial metal ion concentration, and temperature were also investigated. The optimum adsorption of Pb²⁺ (95 %) and Hg²⁺ (65 %) were observed at pH 6. The pseudo-second order equation represented the adsorption kinetics with high correlation coefficient. Langmuir model showed the best fitting to the isotherm equilibrium data, with a maximum adsorption capacity of 18.8 mg g^?1 for Pb²⁺ and 17.2 mg g^?1 for Hg²⁺. Furthermore, thermodynamic factors, i.e., ΔG, ΔH, and ΔS, indicated that adsorption of Pb²⁺ and Hg²⁺ onto TIV were spontaneous, endothermic, and feasible in the temperature range of 293–323 K.     

Methylene blue as a DNA probe for a comparative study of Cd, Pb and Cr ions binding to calf thymus DNA

Methylene blue (MB) was developed as a sensitive DNA probe for a comparative study of Cd²⁺, Pb²⁺ and Cr³⁺ ions binding with calf thymus DNA (ctDNA). The fluorescence intensity of the MB-ctDNA system increased dramatically when heavy metal ions (Cd²⁺, Pb²⁺ and Cr³⁺ ions) were added, which indicated that some of the bound MB molecules were released from the ctDNA base pairs. To compare the binding affinity of these three different heavy metal ions with ctDNA, the relationships between the fluorescence intensity of the MB-ctDNA-M (Metal ions) system and the concentration ratio of [M]/[DNA(p)] were investigated. The results showed that the order of the binding affinity of heavy metal ions with ctDNA had the following sequence: Cr³⁺> Cd²⁺>Pb²⁺. This order was further proved by the effects of heavy metal ions on the number of MB bound to ctDNA, the measurements of binding constants of these heavy metal ions to ctDNA, and the effects of heavy metal ions on the absorption of the MB-ctDNA system. In addition, the interaction mechanisms of Cd²⁺, Pb²⁺ and Cr³⁺ ions with ctDNA were also discussed in detail. These results indicated that their interaction mechanisms are related to the concentration ratios of heavy metal ions to DNA.     

Complex formation of pyridine‐azacrown ether amide macrocycles with proton and heavy metal ions in aqueous solution

This research concerns the analysis of the proton and metal ion binding of amide macrocycles of different structures and sizes by potentiometric, ¹H NMR and X‐ray diffraction methods. Protonated ligands exist as a 3D network structures. The ligands form 1:1 complexes with heavy metal ions (Cu²⁺, Cd²⁺, Pb²⁺, Zn²⁺, and Ni²⁺) in aqueous solutions and demonstrate the high selectivity towards Cu²⁺ cations. The pyridine‐2,6‐dicarbamide fragment provides structural rigidity to crown ether, resulting the molecule has an open cavity and faster kinetics of metal complexes formation. Copyright © 2015 John Wiley & Sons, Ltd.     

Removal of heavy metals from aqueous solutions using Fe3O4, ZnO, and CuO nanoparticles

This study investigated the removal of Cd²⁺, Cu²⁺, Ni²⁺, and Pb²⁺ from aqueous solutions with novel nanoparticle sorbents (Fe₃O₄, ZnO, and CuO) using a range of experimental approaches, including, pH, competing ions, sorbent masses, contact time, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The images showed that Fe₃O₄, ZnO, and CuO particles had mean diameters of about 50?nm (spheroid), 25?nm (rod shape), and 75?nm (spheroid), respectively. Tests were performed under batch conditions to determine the adsorption rate and uptake at equilibrium from single and multiple component solutions. The maximum uptake values (sum of four metals) in multiple component solutions were 360.6, 114.5, and 73.0?mg?g^?1, for ZnO, CuO, and Fe₃O₄, respectively. Based on the average metal removal by the three nanoparticles, the following order was determined for single component solutions: Cd²⁺?>?Pb²⁺?>?Cu²⁺?>?Ni²⁺, while the following order was determined in multiple component solutions: Pb²⁺?>?Cu²⁺?>?Cd²⁺?>?Ni²⁺. Sorption equilibrium isotherms could be described using the Freundlich model in some cases, whereas other isotherms did not follow this model. Furthermore, a pseudo-second order kinetic model was found to correctly describe the experimental data for all nanoparticles. Scanning electron microscopy, energy dispersive X-ray before and after metal sorption, and soil solution saturation indices showed that the main mechanism of sorption for Cd²⁺ and Pb²⁺ was adsorption, whereas both Cu²⁺ and Ni²⁺ sorption were due to adsorption and precipitation. These nanoparticles have potential for use as efficient sorbents for the removal of heavy metals from aqueous solutions and ZnO nanoparticles were identified as the most promising sorbent due to their high metal uptake.     

Off-on Fluorescent Sensor from On-off Sensor: Exploiting Silver Nanoparticles Influence on the Organic Fluorophore Fluorescence

Turn-off fluorescence of organic fluorophore, 2-{[4-(2H-Naphtho[1,2-d][1,2,3]triazol-2-yl)-phenyl]carboxylic acid (NTPC), with metal ions (Fe³⁺, Cu²⁺, Pb²⁺) was converted into turn-on fluorescent sensor for biologically important Zn²⁺, Cu²⁺ and Fe³⁺ metal ions in aqueous solution at ppb level by exploiting strong fluorescence quenching phenomena of metal nanoparticles when organic fluorophores assembled in the vicinity of metallic surface. Amino acid attached phenolic ligands (L) were used as reducing as well as functional capping agents in the synthesis of silver nanoparticles (AgNPs). The hydrogen bonding functionality of L facilitated the assembling of NTPC in the vicinity of metallic surfaces that leads to complete quenching of NTPC fluorescence. The strong and selective coordination of L with metal ions (Zn²⁺, Cu²⁺ and Fe³⁺) separates the NTPC from the AgNPs surface that turn-on the NTPC fluorescence. HR-TEM and absorption studies confirm the metal coordination with L and separation of NTPC from the AgNPs surface. Mn²⁺ showed selective red shifting of NTPC fluorescence after 12 h with all sample. Effects of different amino acid attached phenolic ligands were explored in the metal ion sensitivity and selectivity. This approach demonstrates the multifunctional utility of metal NPs in the development of turn-on fluorescence sensor for paramagnetic heavy metal ions in aqueous solution.

High Adsorption Pearl‐Necklace‐Like Composite Membrane Based on Metal–Organic Framework for Heavy Metal Ion Removal

The zeolitic imidazolate framework‐67 (ZIF‐67)‐based “pearl‐necklace‐like” composite membranes are prepared by in situ intergrown on the surface of 2‐methylimidazole/cellulose acetate (MIM/CA) electrospun nanofibers for the first time. With the aid of MIM, the ZIF‐67 nanocrystals successfully grow throughout the composites and attach to the fibers just like the pearls in necklace. The incubation time of ZIF‐67 has a significant influence on the structures and properties of the composites. And with an approximate saturation of ZIF‐67 nanocrystals, the integrated composites achieve a much higher surface area of 463.1 m2 g⁻¹, which is as dozens of times as that of pure MIM/CA electrospun nanofibers (6.9 m2 g⁻¹). In addition, the composites performed a high Cu(II) and Cr(VI) adsorption of 18.9 mg g⁻¹ and 14.5 mg g⁻¹, respectively. The adsorption data are well fitted with the pseudo‐second‐order kinetics. Moreover, adsorption mechanism is also discussed, and the electrostatic adsorption and ions exchange contribute to the high adsorption of Cu(II) and Cr(VI), and the existence of Cr(III) indicates that the Cr(VI) ions are partially reduced to Cr(III) during the adsorption. Therefore, the fabricated metal organic framework‐composite membrane with special “pearl‐necklace‐like” is a promising environmental material for removing heavy metal ions from water.     

Biomass waste-derived activated carbon for the removal of arsenic and manganese ions from aqueous solutions

The goal of this study is to investigate the preparation of low-cost activated carbon from bean pods waste and to explore their potential application for the removal of heavy metals from aqueous solutions. Conventional physical (water vapor) activation was used for synthesizing the adsorbent. The obtained carbon was employed for the removal of As (III) and Mn (II) from aqueous solutions at different initial concentrations and pH values. Adsorption for both ions follows Langmuir-type isotherm, the maximum loading capacities for arsenic (III) and Mn (II) ions being 1.01 and 23.4 mg g⁻¹, respectively. According to the experimental data, it can be inferred that the basic character of the surface, i.e. the high content of basic groups, favors adsorption of ions. Arsenic adsorption capacity on the carbon obtained from agricultural waste was found to be similar to this of more expensive commercial carbons showing high adsorption capability. Regarding manganese adsorption, herein obtained carbon presented higher uptake adsorption than that of activated carbons reported in the literature.     

Optimum complexation of uranyl with amidoxime in aqueous solution under different pH levels: density functional theory calculations

This study aims to understand the complexation of uranyl with amidoxime in aqueous solution under different pH levels using density functional theory calculations. The geometries, relative stabilities of complexes, and changes in Gibbs free energies for different complexing reactions were investigated. Amidoximate ions were gradually added to the equatorial plane of uranyl to understand the complexation process. We modelled the effect of pH by varying the number of OH^? and H₂O ligands accompanying amidoximate ions in the equatorial plane of uranyl. The ?² binding motif was the most favourable form, regardless of the uranyl/amidoximate ratio and the pH level. Compared with low and high pH, neutral pH condition was more beneficial to the complexation of uranyl with amidoxime.     

Investigate the ultrasound energy assisted adsorption mechanism of nickel(II) ions onto modified magnetic cobalt ferrite nanoparticles: Multivariate optimization

In present study, magnetic cobalt ferrite nanoparticles modified with (E)-N-(2-nitrobenzylidene)-2-(2-(2-nitrophenyl)imidazolidine-1-yl) ethaneamine (CoFe₂O₄-NPs-NBNPIEA) was synthesized and applied as novel adsorbent for ultrasound energy assisted adsorption of nickel(II) ions (Ni²⁺) from aqueous solution. The prepared adsorbent characterized by Fourier transforms infrared spectroscopy (FT-IR), transmission electron microscope (TEM), vibrating sample magnetometer (VSM) and X-ray diffraction (XRD). The dependency of adsorption percentage to variables such as pH, initial Ni²⁺ ions concentration, adsorbent mass and ultrasound time were studied with response surface methodology (RSM) by considering the desirable functions. The quadratic model between the dependent and independent variables was built. The proposed method showed good agreement between the experimental data and predictive value, and it has been successfully employed to adsorption of Ni²⁺ ions from aqueous solution. Subsequently, the experimental equilibrium data at different concentration of Ni²⁺ ions and 10 mg amount of adsorbent mass was fitted to conventional isotherm models like Langmuir, Freundlich, Tempkin, Dubinin-Radushkevich and it was revealed that the Langmuir is best model for explanation of behavior of experimental data. In addition, conventional kinetic models such as pseudo-first and second-order, Elovich and intraparticle diffusion were applied and it was seen that pseudo-second-order equation is suitable to fit the experimental data.     

Preparation and characterization of hexadecyl functionalized magnetic silica nanoparticles and its application in Rhodamine 6G removal

In this paper, a new adsorbent, hexadecyl functionalized magnetic silica nanoparticles (C₁₆/SiO₂-Fe₃O₄ NPs), was prepared by a facile method. The final product was characterized by X-ray diffractometer, transmission electron microscope, Fourier transform infrared spectrometer and vibration sample magnetometer. The preparation and adsorption conditions of the adsorbent were optimized. The adsorbent prepared maintaining volume ratio of tetraethylorthosilicate to hexadecyltrimethoxysilane at 1:0.5 and their total volume at 1100 μL exhibited high adsorption capacity. The optimum pH value for the adsorption experiments was 11.00. The adsorption behavior of Rhodamine 6G onto C₁₆/SiO₂-Fe₃O₄ NPs obeyed pseudo-second-order kinetic model and Langmuir isotherm. Thermodynamic data indicated that the adsorption process was spontaneous and exothermic. The adsorption capacity of the adsorbent could reach to 35.6 mg g⁻¹, owing to the hydrophobic attraction and the enhanced electrostatic attraction. The saturation magnetization of the magnetic adsorbent was 35 emu g⁻¹, which ensured the magnetic separation after adsorption.     

The optimal condition for H<Subscript>2</Subscript>TiO<Subscript>3</Subscript>–lithium adsorbent preparation and Li<Superscript>+</Superscript> adsorption confirmed by an orthogonal test design

An orthogonal test design was applied to confirm the optimum condition for H₂TiO₃–lithium adsorbent preparation and Li⁺ adsorption. Extraction and adsorption mechanism and cycle performance were studied. The verified optimal condition is confirmed as the Li⁺ concentration, adsorption temperature, molar ratio of Li/Ti, reaction, and pre-calcination temperature are 4.0 g L^?1, 60 °C, 2.2, and 650 and 25 °C, respectively. Under the optimal condition, the adsorptive capacity reaches 57.8 mg g^?1. Adsorptive capacity of the adsorbent maintains in 5 cycles, typically 25–30 mg g^?1.     

Ultrasonic-assisted recycling of Nile tilapia fish scale biowaste into low-cost nano-hydroxyapatite: Ultrasonic-assisted adsorption for Hg2+ removal from aqueous solution followed by “turn-off” fluorescent sensor based on Hg2+-graphene quantum dots

This study was planned to recycle calcium and the phosphorus-rich Nile tilapia fish scale biowaste into nano-hydroxyapatite (FHAP), using ultrasonic-assisted extraction of calcium and phosphorus from fish scales, which was optimized in term of extraction time, acid concentration, extraction temperature, and ultrasonic power. These two elements were determined simultaneously by inductively coupled plasma atomic emission spectrometry and the FHAP phase was formed upon addition of the extracted element solution in alkaline medium using homogenous precipitation assisted with ultrasound energy. The FHAP adsorbent was characterized by x-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller. A combination of FHAP and the ultrasonic method was then used to remove Hg²⁺ from aqueous solution. Four significant variables affecting Hg²⁺ removal, namely, adsorbent dosage, pH, ultrasonic power, and adsorption time, were studied. The results exhibited that the optimal conditions for maximizing the removal of Hg²⁺ were 0.02 g adsorbent dosage, pH 8, 0.4 kW ultrasonic power, 20 min adsorption time, and 30 °C adsorption temperature. The sorption mechanism of Hg²⁺ was revealed by isotherm modeling, indicating that FHAP adsorbent has a potential for Hg²⁺ removal in aqueous media with the maximum adsorption capacity being 227.27 mg g⁻¹. This adsorption behavior is in agreement with the Langmuir model as reflected by a satisfactory R² value of 0.9967, when the kinetics data were fitted with pseudo-second-order. Therefore, the FHAP could be an alternative adsorbent for the ultrasonic-assisted removal of Hg²⁺ at very high efficiency and within a very short period of time.     

Structure and photophysical behavior of 2,2′-bipyrimidine/lanthanide ion complexes in various environments

The photophysical behavior of 2,2′-bipyrimidine has been studied alone and in the presence of several lanthanide or other metal ions. This substance, which is employed as bridging ligand in homo- and hetero-dinuclear complexes, can form stable complexes with luminescent lanthanide ions like Eu³⁺ and Tb³⁺. Complexes precipitated from common solvents are crystalline with a structure that consists of discrete, centrosymmetric dinuclear entities with a planar ligand configuration. These complexes are strongly luminescent. Luminescence is sensitized by ligand-to-metal energy transfer. However, when the ligand and metal ions are mixed in an unconventional solvent, like a poly(ethylene glycol) oligomer, all reagents stay in solution and produce a different type of complex where only an enhanced ligand-centered fluorescence can be observed. It is possible that such fluorescence is emitted by 2,2′-bipyrimidine in a non-planar configuration. This behavior has also been observed with other heterocyclic ligands that can exist in different conformers, like terpyridine, and it may explain why some ligand-lanthanide complexes sometimes fail to sensitize efficient photoluminescence.     

Synthesis of nanoporous TiO2 materials using a doubly surfactant system and applying them as useful adsorbents

Hydrothermal and non-hydrothermal nanoporous TiO₂ materials were synthesized via a doubly surfactant route by using cationic cetyltrimethylammonium bromide and anionic sodium dodecyl sulfate surfactants as the molecular template/structure directing agent. Hydrothermal treatment was performed for comparison. The bulk chemical and phase compositions, crystalline structures, particle morphologies, thermal stabilities and surface texturing were determined by means of X-ray powder analysis, SEM and N₂ sorptiometry. The nanoporous TiO₂ materials were found to have a spherical morphology with a diameter range of 50–200 nm and a high surface area (390 m² g^?1). Hydrothermal and non-hydrothermal nanoporous TiO₂ materials were applied for adsorption of heavy metal cations and the toxic organic compound, copper phthalocyanine, from water for evaluation of their adsorption properties. Both nanoporous TiO₂ materials were found to have similar adsorption capacities toward heavy metal cations and CuPc. Both hydrothermal and non-hydrothermal TiO₂ nanoporous materials were found to have very good potential for application as a new adsorbent especially for adsorbing heavy metal cations from wastewaters.     

Spectroscopic study on the 4′-(4-pyridyl)-2,2′:6′,2′′-terpyridine and its metal complexes

Multitopic ligand, 4′-(4-pyridyl)-2,2′:6′,2″-terpyridine (pyterpy), has attracted growing attention because of its unique structural features, optical and electrochemical properties. Here, we report spectroscopic studies of pyterpy and its metal complexes in methanol solution. For the pure pyterpy, the ligand emission intensity increased with its concentration in the dilute solution, but decreased when its concentration was over 1.3×10⁻⁵ mol/l due to the concentration quenching. No significant influence on the ligand luminescence was observed for the Zn²⁺-pyterpy complex but strong luminescence quenching was observed for the electroactive Fe²⁺- and Co²⁺-pyterpy complexes. The lanthanide (Sm³⁺, Eu³⁺ and Tb³⁺) complexes of the pyterpy showed both ligand and lanthanide ion emissions, especially for the Tb³⁺-pyterpy complex, suggesting that the excited energy of pyterpy ligand could be efficiently transferred to the central Tb³⁺ ions. The luminescence was pH sensitive with the strongest emission in the neutral solution. The results indicated that the multitopic ligand of pyterpy could not only act as linkers for the metal-directed building blocks, but also act as optical materials with its own emission at about 364 nm and as light antenna for the lanthanide ions.