Preparation of phenyl‐modified natural rubber in latex stage

Phenyl‐modified natural rubber was prepared in latex stage by bromination of deproteinized natural rubber followed by Suzuki‐Miyaura cross‐coupling reaction. First, the bromination of natural rubber was carried out using N‐bromosuccinimide in latex stage. The bromine atom content increased as amount of N‐bromosuccinimide increased. Second, the allylic bromine atom was replaced with a phenyl group using phenyl boronic acid in the presence of a palladium catalyst, according to the Suzuki‐Miyaura cross‐coupling reaction in latex stage. The resulting products were characterized by nuclear magnetic resonance (NMR) spectroscopy. Signal at 7.13 ppm was assigned to the phenyl group of the product, while signals at 3.98, 4.14, and 4.44 ppm were assigned to the remaining allylic brominated cis‐1,4‐isoprene units. The estimated phenyl group content and the conversion of the Suzuki‐Miyaura cross‐coupling reaction were 1.32 and 23.7 mol%, respectively. Glass transition temperature (T_g) of deproteinized natural rubber increased from ?62°C to ?46.7°C, when the phenyl group was introduced into the rubber.     

A dataset of highly accurate homolytic NBr bond dissociation energies obtained by Means of W2 theory

Homolytic N? Br bond dissociation constitutes the initial step of numerous reactions involving N‐brominated species. However, little is known about the strength of N? Br bonds toward homolytic cleavage. We herein report accurate bond dissociation energies (BDEs) for a set of 18 molecules using the high‐level W2 thermochemical protocol. The BDEs (at 298 K) of the species in this set range from 162.2 kJ mol^?1 (N‐bromopyrrole) to 260.6 kJ mol^?1 ((CHO)₂NBr). In order to compute BDEs of larger systems, for which W2 theory is not applicable, we have benchmarked a wide range of more economical theoretical procedures. Of these, G3‐B3 offers the best performance (root‐mean‐square deviations = 2.9 kJ mol^?1), and using this method, we have computed N? Br BDEs for four widely used N‐brominated compounds. These include (BDEs are given in parentheses): N‐bromosuccinimide (281.6), N‐bromoglutarimide (263.2), N‐bromophthalimide (274.7), and 1,3‐dibromo‐5,5‐dimethylhydantoin (218.2 and 264.8 kJ mol^?1). © 2015 Wiley Periodicals, Inc.     

Latex‐state NMR spectroscopy for quantitative analysis of epoxidized deproteinized natural rubber

Method of quantitative analysis through latex‐state ¹³C NMR spectroscopy was established for in situ determination of epoxy group content of epoxidized natural rubber in latex stage. The epoxidized natural rubber latex was prepared by epoxidation of deproteinized natural rubber with freshly prepared peracetic acid in latex stage. The resulting epoxidized deproteinized natural rubber (EDPNR) latex was characterized through latex‐state ¹³C NMR spectroscopy. Chemical shift values of signals of latex‐state ¹³C NMR spectrum for EDPNR were similar to those of solution‐state ¹³C NMR spectrum for EDPNR. Resolution of latex‐state ¹³C NMR spectrum was gradually improved as temperature for the nuclear magnetic resonance (NMR) measurement increased to 70°C. Signal‐to‐noise ratio of latex‐state ¹³C NMR measurement was similar to that of solution‐state ¹³C NMR measurement at temperature above 50°C. The epoxy group content determined through latex‐state NMR spectroscopy was proved to be the same as that determined through solution‐state NMR spectroscopy. Copyright © 2017 John Wiley & Sons, Ltd.     

Synthesis and evaluation of polyacrylamides derived from polycyclic pendant naphthalene,indole, and phenothiazine based chalcone moiety as potent antimicrobial agents

Polycyclic chalcone‐containing polyacrylamides, namely, poly ((N‐(4‐((E)‐3‐(naphthalen‐6‐yl)‐3‐oxoprop‐1‐enyl) phenyl) acrylamide), poly((N‐(4‐((E)‐3‐(1H‐indol‐3‐yl)‐3‐oxoprop‐1‐enyl) phenyl) acrylamide), and poly((N‐(4‐((E)‐3‐oxo‐3‐(10H‐phenothiazin‐8‐yl) prop‐1‐enyl) phenyl) acrylamide), were synthesized by Claisen–Schmidt condensation reaction, followed by ultrasonic irradiation reduction. The synthesized polymers were characterized by Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance, and ¹³C nuclear magnetic resonance spectroscopic technique. The newly synthesized polymers have been screened for antibacterial and antifungal activities by using resazurin reduction assay method, and the resulting polyacrylamides showed promising activity against various tested bacteria and fungi. Among the polymers, poly((N‐(4‐((E)‐3‐oxo‐3‐(10H‐phenothiazin‐8‐yl) prop‐1‐enyl) phenyl) acrylamide) and poly((N‐(4‐((E)‐3‐(1H‐indol‐3‐yl)‐3‐oxoprop‐1‐enyl) phenyl) acrylamide) exhibited better antifungal and antibacterial activities than poly ((N‐(4‐((E)‐3‐(naphthalen‐6‐yl)‐3‐oxoprop‐1‐enyl) phenyl) acrylamide), whereas all the polymers do not show any sign of antibacterial and antifungal activity against Streptococcus faecalis and Candida glabrata. Copyright © 2016 John Wiley & Sons, Ltd.     

Modular Synthesis of Phenanthro[9,10‐c]thiophenes by a Sequence of CH Activation,Suzuki Cross‐Coupling and Photocyclization Reactions

A total number of 15 different 3,4‐diarylthiophenes were synthesized, which bear a chlorine atom in ortho‐position of one of the aryl substituents. One aryl group was introduced by an oxidative cross‐coupling reaction, involving a C?H activation at C4(3) of the thiophene core. The other aryl group was in most cases introduced by a Suzuki cross‐coupling reaction, which succeeded the oxidative cross‐coupling step. Photocyclization reactions of the 3,4‐diarylthiophenes were performed in a solvent mixture of benzene and acetonitrile (50:50 v/v) at λ=254 nm and proceeded to the title compounds in yields of 60–82 %. The selectivity of the photocyclization was determined at the ortho‐chloro‐substituted aryl ring by the position of the chlorine substituent. At the other ring, a single regioisomer was observed for phenyl and para‐substituted phenyl groups. For 2‐naphthyl and ortho‐substituted phenyl rings a clear preference was observed in favor of a major regioisomer, while meta‐substitution in the phenyl ring led to a about 1:1 mixture of 5‐ and 7‐substituted phenanthro[9,10‐c]thiophenes. Mechanistically, the photocyclization is likely to occur as a photochemically allowed, conrotatory [(4n+2)π] process accompanied by elimination of HCl. It was shown for two phenanthro[9,10‐c]thiophene products that they can be readily brominated in positions C1 and C3 (74–77 %), which in turn allows for further functionalization at these positions, for example, in the course of halogen–metal exchange and polymerization reactions.     

Synthesis of peroxide‐curable butyl rubber via suzuki–miyaura coupling of halogenated butyl rubber with 4‐vinylphenylboronic acid

The Suzuki–Miyaura coupling reaction of brominated butyl rubber (BIIR) and/or chlorinated butyl rubber with a mixture of 4‐vinylphenylboronic acid and phenylboronic acid was carried out in THF under various conditions using a di‐μ‐chlorobis [5‐hydroxy‐2‐[1‐(hydroxyimino‐κN)ethyl]phenylκC] palladium(II) dimer, which is a type of cyclopalladated complex, as a catalyst. When BIIR and a small amount (Pd/Br ≈ 1/1000) of complex were used as the substrate and catalyst, respectively, a 4‐vinylphenyl and phenyl group could be introduced to butyl rubber in a high yield. Isomerization of the exo carbon–carbon double bond in BIIR was observed during the coupling reaction to give a cis and trans endo structure. The peroxide curing behavior of the resulting polymer at 170 °C indicated that the polymer could be cured by dicumyl peroxide, and the maximum torque of the resulting material, which reflects the crosslink density, was controllable by the composition of the boronic acids used. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Die Umwandlung von N‐Methylpolyborosilazan in amorphes Siliciumborcarbonitrid

Conversion of N ‐Methylpolyborosilzane to Amorphous Siliconboroncarbonitride The amorphous ceramic ‘SiBN₃C' has been synthesized starting from 1,1‐dichloro‐N‐(trichlorosilyl)‐boranamine (TADB) with N‐methylpolyborosilazane as a polymeric intermediate. On heating the ceramic up to 1900 °C no microstructural changes occur. The thermal conversion of the preceramic polymer was investigated by thermal analysis, infrared spectroscopy and nuclear magnetic resonance spectroscopy. Surprisingly, the pyrolysis proceeds in three clearly divided steps which can be assigned to completion of the polycondensation (200–350 °C), fragmentation (580–620 °C) and elimination of residual hydrogen (1000–1400 °C).     

Reaction of 3‐substituted and 4‐bromo‐3‐substituted isoquinolin‐1‐(2h)‐ones with propargyl bromide

Isoquinolinones were brominated using N‐bromosuccinimide in dimethylformamide at room temperature to give 4‐bromo‐3‐substituted isoquinolin‐1‐(2H)‐ones. The reaction of these isoquinolinones with propargyl bromide in the presence of anhydrous potassium carbonate yielded N and O‐alkylated products.     

Synthesis,functionalization and crosslinking reactions of poly(silylenemethylene)s

Novel poly(silylenemethylene)s have been prepared by the ring‐opening polymerization of 1,3‐disilacyclobutanes followed by a protodesilylation reaction with triflic acid. The silicon–aryl bond cleavage could be controlled by using different leaving groups, for instance phenyl‐ and para‐anisyl substituents. The reactions of the triflate derivatives with organomagnesium compounds, LiAlH₄, amines or alcohols gave functional substituted poly(silylenemethylene)s. Hydrosilylation reactions or reductive coupling with potassium–graphite led to organosilicon network‐polymers, which may serve as suitable precursors for silicon carbide and Si/C/N‐based materials. The structures of the polymers were identified by nuclear magnetic resonance spectroscopy (²⁹Si, ¹³C, ¹H). Copyright © 1999 John Wiley & Sons, Ltd.     

13C CP MAS NMR of halogenated (Cl,Br, I) pharmaceuticals at ultrahigh magnetic fields

This work reports significantly improved spectral resolution of ¹³C CP MAS NMR spectra of chlorinated, brominated and iodinated solid organic compounds when such spectra are recorded at ultrahigh magnetic field strengths. The cause of this is the residual dipolar coupling between carbon atoms and quadrupolar halogen nuclides (chlorine‐35/37, bromine‐79/81 or iodine‐127), an effect inversely proportional to the magnetic field strength which declines in importance markedly at 21.1 T as compared to lower fields. In favorable cases, the fine structure observed can be used for spectral assignment, e.g. for Cl‐substituted aromatics where the substituted carbon as well as the ortho‐carbons show distinct doublets. The experimental results presented are supported by theoretical modeling and calculations. The improved spectral resolution in the studied systems and similar halogenated materials will be of particular interest and importance for polymorph identification, drug discovery and quality control in the pharmaceutical industry. Copyright © 2009 John Wiley & Sons, Ltd.     

Conformational dynamics of bis(BF2)‐2,2′‐bidipyrrins revealed by through‐space 13C?19F and 19F?19F couplings

The conformation of [bis‐(N,N′‐difluoroboryl)]‐3,3′‐diethyl‐4,4′,8,8′,9,9′,10,10′‐octamethyl‐2,2′‐bidipyrrin (1) in solution was studied by analyzing the ¹³C? ¹⁹F and ¹⁹F? ¹⁹F through‐space spin–spin couplings. The ¹H and ¹³C NMR spectra were assigned on the basis of nuclear Overhauser effect spectroscopy (NOESY), heteronuclear single‐quantum correlation (HSQC), and heteronuclear multiple‐bond correlation (HMBC) experiments. The ¹⁹F spectrum of 1 was compared with that of 2‐ethyl‐1,3,5,6,7‐pentamethyl‐4,4‐difluoro‐4‐bor‐3a,4a‐diaza‐s‐indacen (2). The ¹⁹F? ¹⁹F through‐space spin? spin coupling in 1 was thus assigned and the coupling constant was obtained by simulating the coupling patterns. The obtained conformation of 1 was compared with those of the known complexes [bis‐(N,N′‐difluoroboryl)]‐3,3′,8,8′,9,9′‐hexaethyl‐4,4′,10,10′‐tetramethyl‐6,6′‐(4‐methylphenyl)‐2,2′‐bidipyrrin (3)and [bis‐(N,N′‐difluoroboryl)]‐9,9′‐diethyl‐4,4′,8,8′,10,10′‐hexamethyl‐3,3′‐bis(methoxycarbonylethyl)‐2,2′‐bidipyrrin (4). The conformational dynamics of 1, 3, and 4 was surveyed by observing the temperature dependence of the through‐space coupling constants between 253 and 333 K. The ¹³C? ¹⁹F and ¹⁹F? ¹⁹F through‐space spin–spin couplings thus confirm similar conformations of different BisBODIPYs in solution in contrast to earlier findings in the solid state. Copyright © 2009 John Wiley & Sons, Ltd.     

Decarboxylative C(sp3)−O Cross‐Coupling

Alkyl aryl ethers are an important class of compounds in medicinal and agricultural chemistry. Catalytic C(sp³)?O cross‐coupling of alkyl electrophiles with phenols is an unexplored disconnection strategy to the synthesis of alkyl aryl ethers, with the potential to overcome some of the major limitations of existing methods such as C(sp²)?O cross‐coupling and S_N2 reactions. Reported here is a tandem photoredox and copper catalysis to achieve decarboxylative C(sp³)?O coupling of alkyl N‐hydroxyphthalimide (NHPI) esters with phenols under mild reaction conditions. This method was used to synthesize a diverse set of alkyl aryl ethers using readily available alkyl carboxylic acids, including many natural products and drug molecules. Complementarity in scope and functional‐group tolerance to existing methods was demonstrated.     

Synthesis and properties of new polyamides derived from 2,2‐bis[4‐[2‐(4‐aminophenoxy)ethoxy]phenyl]sulfone by direct polycondensation

A series of new polyamides containing both sulfone and oxyethylene moieties in the polymer chain was prepared by the direct polycondensation of the diamine monomer 2,2‐bis[4‐[2‐(4‐aminophenoxy)ethoxy]phenyl]sulfone (BAEPS) and various aromatic dicarboxylic acids in N‐methyl‐2‐pyrrolidinone (NMP) using triphenyl phosphite and pyridine as condensing agents. Polymers were produced with inherent viscosities of 0.30–0.60 dl/g and identified by elemental analysis, and infrared and nuclear magnetic resonance spectra. Most of the polymers were readily dissolved in polar solvents such as NMP, dimethylsulfoxide, N,N‐dimethylacetamide, N,N‐dimethylformamide and m‐cresol at room temperature. Polymers containing rigid and symmetric p‐phenylene, naphthalene and p‐biphenylene moieties revealed a crystalline nature and showed no solubility in organic solvents. These polyamides had 10% weight loss temperatures ranging between 423 and 465 °C in nitrogen atmosphere and glass transition temperatures between 170 and 305 °C. The polymers with crystallinity nature exhibited melting endotherms (T_m) below 386 °C in differential scanning calorimetry trace. Copyright © 1999 John Wiley & Sons, Ltd.     

Iminophosphine palladium(II) complexes: synthesis,characterization, and application in Heck cross‐coupling reaction of aryl bromides

Palladium(II) complexes containing phosphorus and nitrogen donor atoms (iminophosphine), dichlorido{N‐[2‐(diphenylphosphino)benzylidene]‐2‐trifluoromethylaniline}palladium(II) 1 , dichlorido{N‐[2‐(diphenylphosphino)benzylidene]‐3‐trifluoromethylaniline}palladium(II) 2 , dichlorido{N‐[2‐(diphenylphosphino)benzylidene]‐2‐methylaniline}palladium(II) 3 , dichlorido{N‐[2‐(diphenylphosphino)benzylidene]‐3‐methylaniline}palladium(II) 4 have been successfully synthesized and fully characterized by FT‐IR and NMR (¹H, ³¹P, ¹⁹F, and ¹³C) spectroscopy techniques. These complexes were first step tested in the reaction of bromobenzene and styrene to determine the optimal coupling reaction conditions and then successfully applied as catalysts for Heck cross‐coupling reactions of activated and deactivated aryl bromides with styrene derivatives and several acrylates. Copyright © 2014 John Wiley & Sons, Ltd.     

Controlled reduction of polypropylene isotacticity and crystallinity by epimerization during reactive processing

Amorphous and low crystallinity polypropylenes were produced by reactive processing of commercial isotactic polypropylenes in the presence of a peroxide (2,5‐dimethyl‐2,5‐di(tert‐butylperoxy)hexane) and N‐bromosuccinimide. Characterization of the modified polypropylene microstructures using ¹³C NMR spectroscopy revealed that crystallinity loss is correlated with the epimerization of numerous methynes randomly along the polymer backbone, leading to decreasing isotacticities ([mmmm]) and average isotactic block lengths. Moreover, degradation usually induced by peroxide was shown to be comparatively limited in additional presence of N‐bromosuccinimide. This fast and easy process therefore allows the production of polypropylene plastomers and elastomers with controlled and homogeneous crystallinities and isotacticities, and relatively low molecular weight distributions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4505–4518, 2009     

Regioselective Bromination and Functionalization of Dibenzo[hi,st]ovalene as Highly Luminescent Nanographene with Zigzag Edges

Dibenzo[hi,st]ovalene (DBOV) is a nanographene with a combination of zigzag and armchair edges, consisting of 38 sp² carbons. Excellent optical properties with strong red emission have been demonstrated. Here we report the regioselective bromination of DBOV bearing two mesityl groups ( DBOV‐Mes ) by treatment with N‐bromosuccinimide (NBS) under mild conditions. The dibrominated DBOV was further subjected to transition‐metal‐catalyzed cross‐coupling reactions, that is, Suzuki and Sonogashira coupling, demonstrating the edge‐decoration of DBOV with different functional groups. Notably, DBOVs arylated at the bay regions showed intense red emission and enhanced fluorescence quantum yields of up to 0.97. Amphoteric reduction and oxidation behavior were observed by cyclic voltammetry (CV) measurements. Chemical oxidation to stable radical cation species was also demonstrated, followed by reduction back to their neutral species.     

Absolute Configuration of the Phenylpropanoid Isolated from Peperomia tetraphylla

A recently identified phenylpropanoid isolated from Peperomia tetraphylla was synthesized in enantiopure forms using an aldol condensation of enantiopure （R）-N-acetyl 4-phenyl-oxazolidin-2-one as the key step. With the aid of the single crystal X-ray crystallographic analysis of the synthetic sample, the configuration for the natural product was unambiguously established. Corrected/updated ^13C NMR and optical rotation are also presented.     

C?C Cross‐Coupling Reactions of O6‐Alkyl‐2‐Haloinosine Derivatives and a One‐Pot Cross‐Coupling/O6‐Deprotection Procedure

Reaction conditions for the C? C cross‐coupling of O⁶‐alkyl‐2‐bromo‐ and 2‐chloroinosine derivatives with aryl‐, hetaryl‐, and alkylboronic acids were studied. Optimization experiments with silyl‐protected 2‐bromo‐O⁶‐methylinosine led to the identification of [PdCl₂(dcpf)]/K₃PO₄ in 1,4‐dioxane as the best conditions for these reactions (dcpf=1,1′‐bis(dicyclohexylphosphino)ferrocene). Attempted O⁶‐demethylation, as well as the replacement of the C‐6 methoxy group by amines, was unsuccessful, which led to the consideration of Pd‐cleavable groups such that C? C cross‐coupling and O⁶‐deprotection could be accomplished in a single step. Thus, inosine 2‐chloro‐O⁶‐allylinosine was chosen as the substrate and, after re‐evaluation of the cross‐coupling conditions with 2‐chloro‐O⁶‐methylinosine as a model substrate, one‐step C? C cross‐coupling/deprotection reactions were performed with the O⁶‐allyl analogue. These reactions are the first such examples of a one‐pot procedure for the modification and deprotection of purine nucleosides under C? C cross‐coupling conditions.     

Crystallization of Poly(ε‐caprolactone) under Nanoparticle Confinement

Solid‐state ¹³C‐NMR spectroscopy has been used to characterize the conformation of the hydrophobic poly(ε‐caprolactone) core of a nanoparticle having a cross‐linked hydrophilic poly(acrylic acid)/polyacrylamide shell. The amphiphilic nanoparticles were synthesized from the diblock copolymer, poly(ε‐caprolactone)₁₂₁‐b‐poly(acrylic acid)₁₆₅ by self‐assembly into polymer micelles, followed by cross‐linking via condensation reactions between the carboxylic acid groups of the hydrophilic shell and the amine groups of 2,2′‐(ethylenedioxy)bis(ethylamine). NMR Experiments performed at −30° on nanoparticles rapidly quenched from 60° show that the core is largely noncrystalline and locally disordered. Heating to 25° results in some crystallization, although far less than that observed for bulk poly(ε‐caprolactone) homopolymer. Storage at −30° results in further crystallization and conversion of most rubbery, mobile regions into more rigid, locally ordered amorphous domains. The absence of dipolar coupling between natural‐abundance ¹³C in the poly(ε‐caprolactone) core of the nanoparticle, and ¹⁵N labels dispersed throughout the cross‐linked shell show that the interface between core and shell is sharp. The dipolar coupling measurements were accomplished by ¹³C{¹⁵N} rotational‐echo double resonance.     

A Combined Solid‐State NMR and X‐ray Crystallography Study of the Bromide Ion Environments in Triphenylphosphonium Bromides

Multinuclear (³¹P and ^79/81Br), multifield (9.4, 11.75, and 21.1 T) solid‐state nuclear magnetic resonance experiments are performed for seven phosphonium bromides bearing the triphenylphosphonium cation, a molecular scaffold found in many applications in chemistry. This is undertaken to fully characterise their bromine electric field gradient (EFG) tensors, as well as the chemical shift (CS) tensors of both the halogen and the phosphorus nuclei, providing a rare and novel insight into the local electronic environments surrounding them. New crystal structures, obtained from single‐crystal X‐ray diffraction, are reported for six compounds to aid in the interpretation of the NMR data. Among them is a new structure of BrPPh₄, because the previously reported one was inconsistent with our magnetic resonance data, thereby demonstrating how NMR data of non‐standard nuclei can correct or improve X‐ray diffraction data. Our results indicate that, despite sizable quadrupolar interactions, ^79/81Br magnetic resonance spectroscopy is a powerful characterisation tool that allows for the differentiation between chemically similar bromine sites, as shown through the range in the characteristic NMR parameters. ^35/37Cl solid‐state NMR data, obtained for an analogous phosphonium chloride sample, provide insight into the relationship between unit cell volume, nuclear quadrupolar coupling constants, and Sternheimer antishielding factors. The experimental findings are complemented by gauge‐including projector‐augmented wave (GIPAW) DFT calculations, which substantiate our experimentally determined strong dependence of the largest component of the bromine CS tensor, δ₁₁, on the shortest Br? P distance in the crystal structure, a finding that has possible application in the field of NMR crystallography. This trend is explained in terms of Ramsey’s theory on paramagnetic shielding. Overall, this work demonstrates how careful NMR studies of underexploited exotic nuclides, such as ^79/81Br, can afford insights into structure and bonding environments in the solid state.