Development of hydrogenated ring‐opening metathesis polymers

New hydrogenated ring‐opening metathesis polymers with excellent thermal and optical properties were developed. These polymers were prepared by the ring‐opening metathesis polymerization of ester‐substituted tetracyclododecene monomers followed by the hydrogenation of the main‐chain double bond. The degree of hydrogenation was an important factor for the thermal stability of the polymers, and as complete hydrogenation as possible was necessary to obtain a thermally stable polymer. The completely hydrogenated ring‐opening polymer derived from 8‐methyl‐8‐methoxycarbonyl‐substituted monomer has a glass‐transition temperature of 171 °C and a 5% weight‐loss temperature of 446 °C. This polymer has excellent thermal and optical properties because of its bulky and unsymmetrical polycyclic structure in the main chain and is an alternative to glass or other transparent polymers such as poly(methyl methacrylate) and polycarbonate resin. This polymer has also been used in a wide variety of applications, such as optical lenses, optical disks, optical films, and optical fiber. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4661–4668, 2000     

Silicon‐containing azo polymers with paired mesogens and their applications to optical memory media

We synthesized a novel photoresponsive monomer, silicon‐containing azo monomer with paired mesogens in the side chain, by reacting 3‐methacryloxypropylmethyldichlorosilane with 2‐[2‐(4‐cyano‐azobenzene‐4′‐oxy)ethylene‐oxy]ethyl alcohol, a mesogenic group. Corresponding homopolymer and copolymers with methyl methacrylate were generated via radical polymerization with AIBN as a radical initiator. Investigations of their thermal properties and optical textures confirmed the monomer and the homopolymer have smectic structures. Homo‐ and copolymer films showed high potential as reversible data recording media via photoinduced alignment of azobenzene groups with irradiation of a linearly or circularly polarized light. Out of all the samples, the copolymer films with high azo dye contents showed the best resolution in the recorded data as well as the fastest response to a pump beam due to large optical birefringence induced in a write‐in process. Strong dependence of the stability of the data stored in the films on the glass transition temperature of the polymers was also observed. In addition, high‐quality holographic grating patterns were inscribed even on the copolymer film with azo molar content of only 7.0% using a modified two‐wave mixing technique. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6734–6745, 2008     

Copolymers Containing Phosphorescent Iridium(III) Complexes Obtained by Free and Controlled Radical Polymerization Techniques

A methacrylate‐functionalized phosphorescent Ir(III)‐complex has been synthesized, characterized, and applied as a monomer in radical copolymerizations. Together with methyl methacrylate, the complex has been copolymerized under free radical polymerization conditions. Aiming for host‐guest‐systems, applicable e.g. in organic light emitting devices (OLEDs), the complex was further copolymerized with a methacrylate‐functionalized carbazole derivative using the atom transfer radical polymerization technique. Applying gel permeation chromatography, in combination with a photodiode array detector, could clearly prove the formation of the copolymers. The optical properties of the photoactive monomers as well as the copolymers were investigated by absorption and emission spectroscopy (in solution). For the carbazole‐copolymer, the emission originates almost exclusively from the complex. This provides evidence of an efficient intrachain energy transfer, which makes the system an interesting candidate for potential OLED applications.

     

Characterization of polyether‐poly(methyl methacrylate)‐lithium perchlorate blend electrolytes

Solid polymer electrolyte (SPE) systems based on interpenetrating blends of poly(ethylene oxide‐co‐propylene oxide) and poly(methyl methacrylate) host matrices, with lithium perchlorate as guest salt, were prepared. These electrolytes were presented as free‐standing films, and their thermal and electrochemical properties were characterized by conductivity and electrochemical stability measurements. The properties of the interpenetrating blends of poly(ethylene oxide‐co‐propylene oxide) and poly(methyl methacrylate) host matrices as the electrolyte component of a solid‐state electrochromic device are reported and the results obtained suggest that this electrolyte provides an encouraging performance in this application. The most conducting electrolyte composition of this SPE system is the formulation designated as SPE2‐0PC (5.01 × 10^?4 S cm^?1 at about 57°C). The lowest decomposition temperature was registered with the SPE6‐15PC composition (233°C). The average transmittance in the visible region of the spectrum was above 41% for all the samples analyzed. After coloration the device assembled with 71 wt% PC presented an average transmittance of 15.71% and an optical density at 550 nm of 0.61. Copyright © 2010 John Wiley & Sons, Ltd.     

Polyelectrolytes with Main‐Chain Perylene Units

A new soluble polyamine with main chain perylene units is synthesized and subsequently converted into cationic or zwitterionic polyelectrolytes. The optical properties of the monomer 1,6,7,12‐tetrakis(4‐tert‐butylphenoxy)‐3,4,9,10‐tetra(bromomethyl)perylene and the resulting polymers have been studied with special attention to ongoing de/aggregation processes. UV–Vis and PL spectra of the polymers show a distinct concentration and solvent dependency of the optical properties. In contrast to the corresponding monomer complete deaggregation did not occur for the polymers. The environment‐sensitive optical properties should allow applications as sensor materials. The perylene‐containing polyelectrolytes may be applied in orthogonal processing schemes toward multilayer electronic devices.     

Preparation and characterization of polymer‐stabilized cholesteric texture cells using (+)‐bornylmethacrylate 1

Chiral monomeric (+)‐bornyl methacrylate (BMA) was synthesized from (+)‐camphor. The normal mode of polymer‐stabilized cholesteric texture (PSCT) liquid crystal cells was fabricated using 97.3 wt% of liquid crystal (E48/CB15 = 92/8) and 2.7 wt% of various compositions of chiral and achiral monomers. BMA was used as a chiral monomer and, 4,4′‐bis[6‐(acryloyloxy)hexyloxy]biphenyl and ethyleneglycol dimethacrylate were used as achiral difunctional monomers. The electro‐optical characteristics and the morphology of the PSCT cells with chiral and achiral polymer materials were investigated. The effects of monomer concentration and polymerization conditions of the chiral (+)‐bornyl methacrylate on the electro‐optical characteristics and morphology of PSCT cells were also investigated. It was found that the electro‐optical characteristics of PSCT cells were improved by using the chiral monomer of (+)‐bornyl methacrylate effectively. A PSCT cell was fabricated, and the reversible turbid and transparent changes were examined by applying a 15 V electric field. Copyright © 2000 John Wiley & Sons, Ltd.     

Atom transfer radical polymerization of 6‐O‐methacryloyl‐1,2;3,4‐di‐O‐isopropylidene‐D‐galactopyranose in solution

A detailed exploration of the atom transfer radical polymerization (ATRP) of a sugar‐carrying monomer, 6‐O‐methacryloyl‐1,2;3,4‐di‐O‐isopropylidene‐D‐galactopyranose (MAIPGal) was performed. The factors pertinent to ATRP, such as initiators, ligands, catalysts, and temperature were optimized to obtain good control over the polymerization. The kinetics were examined in detail when the polymerization was initiated by methyl 2‐bromoisopropionate (2‐MBP), ethyl 2‐bromoisobutyrate (2‐EBiB), or a macroinitiator, [α‐(2‐bromoisobutyrylate)‐ω‐methyl PEO] (PEO–Br), with bipyridine (bipy) as the ligand at 60 °C or by 2‐EiBB with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the ligand at room temperature (23 °C). The effects of the catalysts (CuBr and CuCl) were also investigated. We demonstrate that the successful ATRP of MAIPGal can be achieved for 2‐EBiB/CuBr/bipy and 2‐MBP/CuCl/bipy at 60 °C and for 2‐EBiB/CuBr/PMDETA at room temperature. The initiation by 2‐EBiB at room temperature with PMDETA as the ligand should be the most optimum operation for its moderate condition and suppression of many side reactions. Chain extension of P(MAIPGal) prepared by ATRP with methyl methacrylate (MMA) as the second monomer was carried out and a diblock copolymer, P(MAIPGal)‐b‐PMMA, was obtained. Functional polymers, poly(D‐galactose 6‐methacrylate) (PGMA), PEO‐b‐PGMA, and PGMA‐b‐PMMA were obtained after removal of the protecting groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 752–762, 2005     

Refractive index increase of acrylate‐based polymers by adding soluble aromatic guest‐molecules

This work presents the influence of dopants on viscosity in an uncured liquid state as well as on refractive index, Abbe number, optical loss, and glass transition temperature of different polymer compositions. The base material consists of Genomer 2263, a bisphenol, an epoxy diacrylate as matrix polymer, and benzyl methacrylate as comonomer. As dopants, the soluble aromatic guest‐molecules 9‐bromophenantrene and 9‐vinylcarbazole are investigated. The viscosity can be adjusted by different mixtures of the matrix polymer and comonomer from 3000 down to 4 mPa sec. Depending on the type and content of the dopants, the refractive index, Abbe number, and the glass transition temperature can be adjusted. The refractive indices increase linear at 589 nm and 20°C from 1.572 to 1.638 by doping, with Abbe numbers between 20 and 30. At this wavelength, the optical losses were determined to be around 2 dB · cm^?1. The glass transition temperature can be tailored between 50 and 98°C. A way to use high amounts of optical dopants is presented, which opens up the way for different shaping technologies like inkjet printing of optical components. Copyright © 2016 John Wiley & Sons, Ltd.     

Luminescence,Stability, and Proton Response of an Open‐Shell (3,5‐Dichloro‐4‐pyridyl)bis(2,4,6‐trichlorophenyl)methyl Radical

A luminescent open‐shell organic radical with high chemical stability was synthesized. (3,5‐Dichloro‐4‐pyridyl)bis(2,4,6‐trichlorophenyl)methyl radical (PyBTM) was photoluminescent under various conditions. Fluorescence quantum yields of 0.03, 0.26, and 0.81 (the highest value reported for a stable organic radical) were obtained in chloroform, in poly(methyl methacrylate) film at room temperature, and in an EPA matrix (diethyl ether:isopentane:ethanol) at 77 K, respectively. The photostability of PyBTM is up to 115 times higher than that of the tris(2,4,6‐trichlorophenyl)methyl radical, a previously reported luminescent radical. The pyridine moiety of PyBTM acts as a proton coordination site, thereby allowing for control of the electronic and optical properties of the radical by protonation and deprotonation.     

Luminescence,Stability, and Proton Response of an Open‐Shell (3,5‐Dichloro‐4‐pyridyl)bis(2,4,6‐trichlorophenyl)methyl Radical

A luminescent open‐shell organic radical with high chemical stability was synthesized. (3,5‐Dichloro‐4‐pyridyl)bis(2,4,6‐trichlorophenyl)methyl radical (PyBTM) was photoluminescent under various conditions. Fluorescence quantum yields of 0.03, 0.26, and 0.81 (the highest value reported for a stable organic radical) were obtained in chloroform, in poly(methyl methacrylate) film at room temperature, and in an EPA matrix (diethyl ether:isopentane:ethanol) at 77 K, respectively. The photostability of PyBTM is up to 115 times higher than that of the tris(2,4,6‐trichlorophenyl)methyl radical, a previously reported luminescent radical. The pyridine moiety of PyBTM acts as a proton coordination site, thereby allowing for control of the electronic and optical properties of the radical by protonation and deprotonation.     

In situ preparation of cross‐linked polystyrene/poly(methyl methacrylate) blend foams with a bimodal cellular structure

In situ preparation of a cross‐linked poly(methyl methacrylate) (PMMA) and polystyrene (PS) blend and its foaming were investigated for creating a bimodal cellular structure in the foam. Methyl methacrylate (MMA) monomer was dissolved in PS under supercritical CO₂ at a temperature of 60 °C and a pressure of 8 MPa, and the polymerization of MMA was conducted at 100 °C and 8 MPa CO₂, with a cross‐linking agent in PS. The blend was successively foamed by depressurizing the CO₂. CO₂ played the roles of plasticizing the PS and enhancing the monomer dispersion in PS during the sorption process and as a physical blowing agent in the foaming process. The cross‐linking agent was used for controlling the elasticity of polymerized PMMA domains and differentiating their elasticity from that of the PS matrix. The difference in elasticity delayed the bubble nucleation in the PMMA domains from that in the PS and made the cell size bimodal distribution, in which the smaller cells ranging from 10 to 30 µm in diameter were located in the wall of large cells of 200–400 µm in diameter. The effects of the initial MMA content, the concentration of cross‐linking agent, and the depressurization rate on the bimodal cell structure and bulk foam density were investigated. Copyright © 2011 John Wiley & Sons, Ltd.     

Dual‐curable fluorinated poly(methacrylate) copolymers for optical adhesives

In pursuit of photo‐curable adhesive for optical communication, dual‐curable acrylic oligomers (AOs) having alkoxy silane group, fluorine atoms and vinyl group as a pendent group were synthesized by two‐stage reactions. The isocyanate group containing oligomers were firstly synthesized via radical polymerization of acrylic monomers, and followed by urethane reaction with 2‐hydroxy ethyl methacrylate. The dual curing behaviors, e.g. thermal and photo‐cure, were studied by using photo‐differential scanning calorimetry (DSC) and real‐time IR. An optimum adhesive formulation, based on AO (15 g), epoxy acrylate (80 g), isobonyl methacrylate (17 g) and photo‐initiator (3 g), was obtained. As the content of AO was increased in the optical adhesive formulation, refractive index decreased but transmittance increased due to the increase in fluorine content. The optical transmittance at the range of 1.3 to 1.55 μm was higher than 90%. The addition of colloidal silica with the earlier mentioned formulation was helpful in decreasing crosslinking volume shrinkage and the increasing of glass fiber adhesion. The required properties for the optical adhesive, including chemical resistance and thermal resistance, dimension stability, etc. were also investigated. Copyright © 2005 John Wiley & Sons, Ltd.     

Branched Azobenzene Side‐Chain Liquid‐Crystalline Copolymers Obtained by Self‐Condensing ATR Copolymerization

Summary: The one step synthesis of a series of branched azobenzene side‐chain liquid‐crystalline copolymers by the self‐condensing vinyl copolymerization (SCVCP) of a methyl acrylic AB* inimer, 2‐(2‐bromoisobutyryloxy)ethyl methacrylate (BIEM), with the monomer 6‐(4‐methoxy‐azobenzene‐4′‐oxy)hexyl methacrylate (M), by atom transfer radical polymerization (ATRP) in the presence of CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine as a catalyst system, and in chlorobenzene solvent, is reported. The degree of branching (DB), and the molecular weights and polydispersities of the resultant polymers were determined by NMR spectroscopy and size exclusion chromatography, respectively. The phase behaviors of the branched copolymers were characterized by differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM). The degree of branching of the branched copolymers could be controlled by the comonomer ratio in the feed and influenced their liquid‐crystal properties. Liquid‐crystal properties were not exhibited when the comonomer ratio was low. Comonomer ratios greater than 8 gave polymers with a lower number of branches, which exhibited both a smectic and a nematic phase.

A polarized optical micrograph of the smectic phase texture of a polymer synthesized here with a higher comonomer feed ratio (magnification × 400).     

Grafting of montmorillonite nano‐clay with butyl acrylate and methyl methacrylate by atom transfer radical polymerization: Blends with poly(BuA‐co‐MMA)

11‐(2‐Bromo‐2‐methyl)propionyl‐oxy‐undecyl trichlorosilane atom transfer radical polymerization (ATRP) initiator was covalently attached on montmorillonite clay platelets via silylation reactions. The initiator clay was used to polymerize butyl acrylate (BuA) and methyl methacrylate (MMA) on the clay surface. Polymerization was performed in bulk monomer solution or in DMSO. Polymer modified clay was mixed with a poly(BuA‐co‐MMA) matrix. Small angle X‐ray scattering (SAXS) and transmission electron microscopy (TEM) showed that clay modified in DMSO gave exfoliated composites when mixed with the matrix copolymer. Mechanical properties of the composites were studied by dynamic mechanical thermal analysis (DMTA). The results showed that the mechanical properties were improved as a function of clay content, as well with an increasing homogeneity of the nanocomposite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3086–3097, 2009     

Synthesis and characterization of physical crosslinking systems based on cyclodextrin inclusion/host‐guest complexation

New supramolecular assemblies based on cyclodextrin and adamantane were prepared. Two methacrylate monomers bearing cyclodextrin and adamantane were synthesized, and copolymerized with poly(ethylene glycol) methyl ether methacrylate, (PEGMA, 300 g/mol), by free radical polymerization. Copolymers bearing pendent cyclodextrin and adamantane were characterized by NMR, FTIR, TGA, SEC, Differential scanning calorimetry (DSC), and UV‐visible spectrophotometer. All copolymers showed two distinct glass transitions. The specific interaction between pendent adamantyl and cyclodextrin was examined by ¹H‐NMR. The viscoelastic properties of supramolecular assemblies were investigated with frequency and temperature sweep experiments. The specific host‐guest interaction between pendent adamantyl and cyclodextrin lead to large increases of the viscosity; and depending on the concentration of these groups, also to gel formation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 581–592, 2010     

Chirality‐Sensing Binaphthocrown Ether–Polythiophene Conjugate

An enantiomeric binaphthyl unit was tethered to adjacent thiophenes with oxyethylene linkers to give a chiral polythiophene with binaphthocrown ether cavities. Upon inclusion of a chiral cationic guest in the cavity of the chiral crown ether–polythiophene conjugate, the bithiophene unit was twisted to shorten the effective conjugation length of polythiophene backbone, enabling us to sense the guest binding by reading out the amplified optical signal gains arising from the backbone structure change. This strategy allowed us to discriminate the guest chirality without using chiroptical signals or a circular dichroism spectrometer to achieve the highest enantioselectivity of 7.3 for valine methyl ester with a 40‐fold enhanced sensitivity compared with the corresponding monomeric sensor.     

A novel fluorine‐containing graft copolymer bearing perfluorocyclobutyl aryl ether‐based backbone and poly(methyl methacrylate) side chains

A series of novel graft copolymers consisting of perfluorocyclobutyl aryl ether‐based backbone and poly(methyl methacrylate) side chains were synthesized by the combination of thermal [2π + 2π] step‐growth cycloaddition polymerization of aryl bistrifluorovinyl ether monomer and atom transfer radical polymerization (ATRP) of methyl methacrylate. A new aryl bistrifluorovinyl ether monomer, 2‐methyl‐1,4‐bistrifluorovinyloxybenzene, was first synthesized in two steps from commercially available reagents, and this monomer was homopolymerized in diphenyl ether to provide the corresponding perfluorocyclobutyl aryl ether‐based homopolymer with methoxyl end groups. The fluoropolymer was then converted to ATRP macroinitiator by the monobromination of the pendant methyls with N‐bromosuccinimide and benzoyl peroxide. The grafting‐from strategy was finally used to obtain the novel poly(2‐methyl‐1,4‐bistrifluorovinyloxybenzene)‐g‐poly(methyl methacrylate) graft copolymers with relatively narrow molecular weight distributions (M_w/M_n ≤ 1.46) via ATRP of methyl methacrylate at 50 °C in anisole initiated by the Br‐containing macroinitiator using CuBr/dHbpy as catalytic system. These fluorine‐containing graft copolymers can dissolve in most organic solvents. This is the first example of the graft copolymer possessing perfluorocyclobutyl aryl ether‐based backbone. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Preparation and electro‐optical properties of polymer dispersed liquid crystal films with relatively low liquid crystal content

In this paper, polymer dispersed liquid crystals (PDLC) films with LC content as low as 40 wt% were prepared, and the electro‐optical properties were carefully investigated. To accomplish this, different (meth)acrylate copolymerizaiton monomers have been used. The electro‐optical properties and morphologies of the PDLC films were strongly influenced by the chemical structure of copolymerization monomers (hydroxypropyl methacrylate (HPMA), glycidyl methacrylate, hydroxypropyl acrylate) and their feed ratio. Lower driven voltage and higher contrast ratio were achieved when the PDLC films showed a morphology with suitably LC domain size. At high HPMA content, a thin polymer film was formed on the surface of PDLC samples, which is beneficial to decrease the total LC content in PDLC devices. Copyright © 2013 John Wiley & Sons, Ltd.     

Facile synthesis of well‐defined pH‐liable Schiff‐base‐type photosensitive polymers via visible‐light‐activated ambient temperature RAFT polymerization

Inspired by the structure character and photosensitive molecular mechanism of natural rhodopsin or bacteriorhodopsin, a novel pH‐liable photosensitive polymer whose chromophores directly bind with Schiff base linkages was designed. Accordingly, 2‐((3‐phenylallylidene)amino)ethyl methacrylate (PAAEMA), 2‐((3‐(4‐fluorophenyl)allylidene)amino)ethyl methacrylate (FPAAEMA), and 2‐((3‐(4‐methoxyphenyl)allylidene)amino)ethyl methacrylate (MPAAEMA) monomers were synthesized. These monomers were polymerized upon irradiating with mild visible light at ambient temperature. The results indicate that Schiff base linkages of these monomers are stable under such mild polymerizing conditions, and the weak absorption of dithioester functionalities in the visible wave range leads to a rapid and well‐controlled RAFT polymerization. The polymerization rate slows down but initialization period significantly shortens on increasing the feed molar ratio of monomer. The pendant electron‐withdrawing‐group‐substituted chromophore improves the reactivity of monomer, but electron‐donating‐group‐substituted chromophore significantly inactivates monomer. Glycidyl methacrylate (GMA) may well incorporate in this polymer via RAFT random copolymerization of PAAEMA and GMA monomers due to the comparable reactivity ratios of this monomer pair. PolyMPAAEMA exhibits reversible fluorescence emitting or quenching upon deprotonating or protonating the Schiff base linkages. This fluorescence behavior may be of interest in the fabrication of pH‐responsive photosensors, light modulators, or actuators. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6668–6681, 2009     

Emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate and methyl methacrylate

The emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate (EHMA) and methyl methacrylate (MMA) was carried out with the bifunctional initiator 1,4‐butylene glycol di(2‐bromoisobutyrate). The system was mediated by copper bromide/4,4′‐dinonyl‐2,2′‐bipyridyl and stabilized by polyoxyethylene sorbitan monooleate. The effects of the initiator concentration and temperature profile on the polymerization kinetics and latex stability were systematically examined. Both EHMA homopolymerization and successive copolymerization with MMA proceeded in a living manner and gave good control over the polymer molecular weights. The polymer molecular weights increased linearly with the monomer conversion with polydispersities lower than 1.2. A low‐temperature prepolymerization step was found to be helpful in stabilizing the latex systems, whereas further polymerization at an elevated temperature ensured high conversion rates. The EHMA polymers were effective as macroinitiators for initiating the block polymerization of MMA. Triblock poly(methyl methacrylate–2‐ethylhexyl methacrylate–methyl methacrylate) samples with various block lengths were synthesized. The MMA and EHMA reactivity ratios determined by a nonlinear least‐square method were ～0.903 and ～0.930, respectively, at 70 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1914–1925, 2006