High-performance liquid chromatographic determination of pesticides in tomatoes using laboratory-made NH2 and C18 solid-phase extraction materials

A method for high-performance liquid chromatographic (HPLC) multiresidue determination of six pesticides in tomatoes was developed and validated. Silica-based C18 (octadecyl) and NH2 (aminopropyl) solid-phase extraction (SPE) sorbents, made in our laboratory, were used for sample preparation. The SPE materials were obtained by thermal immobilization of appropriate polysiloxanes onto 40 microm silica surfaces and were used in sample preparation for multiresidue analysis of the following pesticides: tebuthiuron and diuron (urea herbicides), simazine, atrazine and ametryn (triazines herbicides) and benomyl (benzimidazol fungicide). The results were compared with similar commercial materials. Reversed-phase high-performance liquid chromatography (RP-HPLC) using a Purospher RP-18 5 microm column and ACN: 0.01% aqueous NH4OH, pH 8.4 (35:65, v/v) as mobile phase, at 0.7 mlmin(-1), with 235 nm UV detection, was used for separation and quantification of the pesticides. Method validation was performed at three fortification levels (100, 200, 1000 microg l(-1)). Limits of detection and quantification show that the methods developed can be used to detect the pesticides in concentrations below the maximum residue levels (MRL) established by the Codex Alimentarius, USA, European Union and Brazilian legislations. The results showed that aminopropyl materials have a better performance than the octadecyl sorbents. Laboratory-made materials give results similar to commercial sorbents, with recoveries and precisions in agreement with directives for method validation in residue analysis.     

New fractionation scheme for lipid classes based on "in-cell fractionation" using sequential pressurized liquid extraction

A new preparation scheme is proposed to fractionate neutral lipids (acylglycerines, sterol esters, long-chain free fatty acids) from polar phospholipids in biological matrices. This fractionation is mandatory in the microbial community, for the control of bioremediation processes, in the study of phytoplankton growth in lakes and rivers, and in the quality control of processed food. Basically, a two-step pressurized liquid extraction (PLE) scheme is combined with an "in-cell-fractionation" using silica-based sorbents placed at the outlet of the PLE cartridge. The optimized extraction scheme consists of n-hexane/acetone (9:1, v/v) extraction at 50 degrees C (2 cycles, 10 min each) to obtain neutral lipids followed by chloroform/methanol (1:4, v/v) extraction at 110 degrees C (2 cycles, 10 min each). Thermally pre-treated silicic acid and cyanoproyl-modified silica turned out to be appropriate sorbents to ensure clear-cut boundaries between neutral lipids and phospholipids. The proposed protocol is superior to commonly used approaches consisting of an exhaustive lipid extraction followed by off-line lipid fractionation using solid-phase extraction (SPE) regarding fractionation efficiency, time and solvent consumption. In this paper, it is also shown that the transmethylation using trimethylchlorosilane/methanol (1:9, v/v) provides a complete reaction to give methyl esters without artefact formation across the array of different lipid classes even with polyunsaturated fatty acid moieties.     

分子印迹固相萃取检测罐装食品中双酚A

以双酚A为模板分子,3-氨基丙基乙氧基硅烷为功能单体,通过溶胶-凝胶反应合成双酚A分子印迹纳米硅胶微球。以印迹微球为固相萃取吸附剂,优化固相萃取条件,确定二氯甲烷为上样溶剂。固相萃取选择性实验表明,在双酚A及其结构类似物四溴双酚A、双酚C、壬基酚的混合物溶液中,印迹萃取柱对双酚A具有良好的选择性能,回收率达到90.7%。浓度为2.5和5μmol/L的加标罐装食品样品,经印迹萃取柱预处理,液相色谱检测得到回收率72%～84%,相对标准偏差2.9%～4.4%。     

Comparison of solvent extraction and solid-phase extraction for the determination of organochlorine pesticide residues in water.

Solid-phase extraction (SPE) of organochlorine pesticide residues from environmental water samples was evaluated using octadecyl (C18)-bonded porous silica. The efficiency of SPE of these pesticide residues from reagent water samples at 1-5 micrograms dm-3 levels was compared with those obtained by solvent extraction with hexane and Freon TF (trichlorotrifluoroethane). Average recoveries exceeding 80% for these organochlorine pesticides were obtained via the SPE method using small cartridges containing 100 mg of 40 microns C18-bonded porous silica. The average recovery by solvent extraction with hexane and Freon TF exceeded 90% in both instances. It was concluded that the recoveries and precision for the SPE of organochlorine pesticides were poorer than those for the solvent extraction method. Organochlorine pesticide residue levels in environmental water samples from two major rivers flowing through predominantly rice-growing areas were monitored by gas chromatography using the solvent extraction method with hexane. Exceptionally high levels of organochlorine pesticide residues such as BHC, DDT, heptachlor, endosulfan and dieldrin were found in these water samples.     

Sequential pressurized liquid extraction to determine brain-originating fatty acids in meat products as markers in bovine spongiform encephalopathy risk assessment studies

A new approach using sequential pressurized liquid extraction described recently [J. Poerschmann, R. Carlson, J. Chromatogr. A, 1127 (2006) 18-25] was applied to determine lipid markers originating from central nervous system (CNS) tissue of cows in heat-processed sausages. These studies are very important in quality control as well as risk assessment studies in the face of the bovine spongiform encephalopathy (BSE) crisis. Diagnostic CNS lipid markers, which should not be present in meat products without CNS addition, were recognized on complete transesterification as polar 2-hydroxy-fatty acids (2OH-24:0, 2OH-24:1, 2OH-22:0, 2OH-18:0, shorthand designation) as well as odd-numbered non-branched fatty acids beyond C(22). An array of other fatty acids including lignoceric acid (24:0), nervonic acid (24:1), arachidonic acid (20:4), and polyunsaturated nC(22)-surrogates are strongly related to CNS lipids, but occur as traces in meat products without CNS addition as well, thus reducing their value as diagnostic markers. Samples including meat products without CNS addition, meat with 3% CNS addition, as well as pure CNS homogenates, were subjected to sequential PLE (pressurized liquid extraction) consisting of two steps: n-hexane/acetone 9:1 (v/v) extraction at 50 degrees C to remove neutral lipids, followed by chloroform/methanol 1:4 (v/v) extraction at 110 degrees C to isolate polar CNS lipids (two 10 min PLE cycles each). To enhance the fractionation efficiency, cyanopropyl modified silica as well as chemically not modified silica sorbent was used at the outlet of the PLE cartridge to retard polar lipids in the first extraction step. This method proved superior to widely distributed exhaustive lipid extraction followed by solid-phase extraction (SPE) using silica regarding lipid recoveries and clear-cut boundaries between lipid classes. Methodological studies showed that the alcoholysis using trimethylchlorosilane/methanol (1:9, v/v) is an excellent method for the complete transesterification of lipids and quantitative formation of methyl esters.     

Determination of two oxy-pyrimidine metabolites of diazinon in urine by gas chromatography/mass selective detection and liquid chromatography/electrospray ionization/mass spectrometry/mass spectrometry

An analytical method was developed for the determination in urine of 2 metabolites of diazinon: 6-methyl-2-(1-methylethyl)-4(1H)-pyrimidinone (G-27550) and 2-(1-hydroxy-1-methylethyl)-6-methyl-4(1H)-pyrimidinone (GS-31144). Two of the urine sample preparation procedures presented rely on gas chromatography/mass selective detection (GC/MSD) in the selected ion monitoring mode for determination of G-27550. For fast sample preparation and a limit of quantitation (LOQ) of 1.0 ppb, urine samples were purified by using ENV+ solid-phase extraction (SPE) columns. For analyte confirmation at an LOQ of 0.50 ppb, classical liquid/liquid partitioning was used before further purification in a silica SPE column. An SPE sample preparation procedure and liquid chromatography/electrospray ionization/mass spectrometry/mass spectrometry (LC/ESI/MS/MS) were used for both G-27550 and GS-31144. The limit of detection was 0.01 ng for G-27550 with GC/MSD, and 0.016 ng when LC/ESI/MS/MS was used for both G-27550 and GS-31144. The LOQ was 0.50 ppb for G-27550 when GC/MSD and the partitioning/SPE sample preparation procedure were used, and 1.0 ppb for the SPE only sample preparation procedure. The LOQ was 1.0 ppb for both analytes when LC/ESI/MS/MS was used.     

Simultaneous determination of bisphenol A, triclosan, and tetrabromobisphenol A in human serum using solid-phase extraction and gas chromatography-electron capture negative-ionization mass spectrometry

This study aimed at optimizing and validating a sensitive method for simultaneous determination of bisphenol A (BPA), triclosan (TCS), and tetrabromobisphenol A (TBBPA) in human serum using solid-phase extraction (SPE) and gas chromatography coupled to electron-capture negative-ionization mass spectrometry (GC-ECNI/MS). Sample preparation involved denaturation of serum proteins with formic acid followed by SPE on an Oasis HLB cartridge. Fractionation was performed on Florisil from which the phenolic compounds were eluted with methanol-dichloromethane (DCM) (5:1, v/v). The phenolic fraction was further derivatized with pentafluoropropionic acid anhydride (30 min at 70 degrees C). Further liquid-liquid partitioning using hexane-DCM (4:1, v/v) and K(2)CO(3) 3% aqueous solution was used to eliminate excess reagent and acidic by-products formed during derivatization. The cleaned extract was injected into a GC-ECNI/MS system operated in selected ion monitoring mode. For thorough method validation, each step of the procedure was rigorously optimized. The method limits of quantitation for BPA, TCS, and TBBPA were 0.28 ng mL(-1), 0.09 ng mL(-1) and 0.05 ng mL(-1), respectively. Furthermore, the method was applied to 21 Belgian human serum samples. The median concentrations obtained for BPA (0.71 ng mL(-1)) and TCS (0.52 ng mL(-1)) in Belgian human serum samples were similar to previously reported data for human fluids. Slightly higher levels of TBBPA (0.08 ng mL(-1)) were found in Belgium samples compared to Norwegian serum.     

应用于全氟辛烷磺酸萃取富集的全氟癸基修饰毛细管硅胶整体柱的制备及应用

利用溶胶-凝胶法,经过烷氧基硅烷的水解、硅羟基的缩聚、凝胶化、陈化、中孔制备、干燥和表面修饰等步骤制备了全氟癸基修饰的毛细管硅胶整体柱。采用该整体柱对全氟辛烷磺酸(PFOS)进行萃取富集,考察其富集特性和效率,并与传统的C18毛细管硅胶整体柱进行对比。结果表明,全氟癸基修饰毛细管硅胶整体柱(15 cm×75μm)对PFOS具有更高的吸附量和更好的富集选择性,其平均吸附量可以达到75 ng;样品中PFOS的质量浓度为0.25 mg/L时,富集倍数平均可以达到29倍。此全氟癸基修饰毛细管硅胶整体柱对PFOS具有良好的萃取富集性能,可用于水质中痕量PFOS的萃取富集。     

Determination of organophosphorus pesticide residues in the roots of Platycodon grandiflorum by solid-phase extraction and gas chromatography with flame photometric detection

A simple and rapid sample preparation method using accelerated solvent extraction and solid-phase extraction (SPE) cleanup for determining organophosphorus (OP) pesticides in the roots of Platycodon grandiflorum was developed. The OP pesticides were concentrated by use of an SPE cartridge (ENVI-Carb) and quantitatively analyzed and confirmed by capillary gas chromatography with flame photometric detection. The pesticides were eluted from the cartridges with 20 mL acetonitrile-toluene (3 + 1, v/v). The average recovery from 10 g PF grandiflorum roots, fortified at 3 levels ranging from 0.04 to 1.00 mg/kg, was 91.9% with a relative standard deviation of 4.3%. The limits of detection ranged from 1.16 x 10(-3) mg/kg (dimethoate) to 4.64 x 10(-3) mg/kg (dichlorvos). The proposed method showed acceptable accuracy and precision while minimizing environmental concerns, time, and labor.     

Determination of ng/mL levetiracetam using ultra-high-performance liquid chromatography-photodiode absorbance

This paper demonstrates the analysis of levetiracetam, a new chiral antiepileptic drug, at ng/mL levels using an ultra-high-performance liquid chromatography (UHPLC)-photodiode absorbance (PDA) method. Three different sample preparation methods, liquid-liquid extraction with Extrelut, solid phase extraction (SPE) with Oasis HLB and Oasis MAX SPE cartridges, and protein precipitation with organic solvents were carried out. The last preparatory method is the simplest and provides the best recoveries: between 97.1% and 100.4% with RSD value below 5%. The column for separation is BEH C18 column (1.7 μm particle size and 100 × 2.1 mm i.d.) and acetonitrile-phosphate buffer (pH = 6.6; 0.01 M) (10/90 v/v) is the mobile phase. The results obtained are compared to analysis conducted by the HPLC method. The UHPLC method was validated in the range of 2-100 μg/mL levetiracetam concentration (R(2) = 0.9997). LOD and LOQ are 10 ng/mL and 33 ng/mL, respectively. The developed UHPLC method was applied to plasma samples of patient with epilepsy.     

Determination of ondansetron and its hydroxy metabolites in human serum using solid-phase extraction and liquid chromatography/positive ion electrospray tandem mass spectrometry

Ondansetron and its hydroxylated metabolites were determined in human serum using solid-phase extraction (SPE) and liquid chromatography/positive ion electrospray tandem mass spectrometry. Pyrimethamine was used as the internal standard. The analytes were eluted from the SPE cartridge using 2 x 1 ml of methanol containing 0.5% triethylamine, evaporated under vacuum and the residue was reconstituted in the mobile phase. The liquid chromatographic separation was achieved on a silica column using a mobile phase of aqueous 20 mM ammonium acetate (pH 4.7)-acetonitrile (85 : 15, v/v) at a flow-rate of 0.4 ml min(-1). The method was linear over the range 1-500 ng ml(-1) for ondansetron and each of the metabolites in human serum. The intra-day accuracy was better than 9.1% and the precision was <10.3%; the inter-day accuracy was better than 9.5% and the precision was <12.6%. The limit of detection was 250 pg ml(-1) based on a signal-to-noise ratio of 3. The absolute recovery from serum for all analytes was >90%.     

Poly(methyltetradecylsiloxane) immobilized onto silica for extraction of multiclass pesticides from surface waters

A new material based on poly(methyltetradecylsiloxane) (PMTDS) thermally immobilized onto a silica support has been tested as a sorbent for the solid-phase extraction (SPE) from water of several pesticides used in soybean cultivation. The SPE methodology was developed and validated for six of these pesticides (imazethapyr, imazaquin, metsulfuron-methyl, bentazone, chlorimuron-ethyl and tebuconazole) according to the International Conference on Harmonization directives and the results were compared with those obtained with a commercial C18 SPE cartridge. The PMTDS-based sorbent gives results similar to the commercial sorbent with recoveries and precisions in agreement with directives for residue analysis. The quantification limits, after concentration, of all the pesticides evaluated were 1.0 μg L⁻¹, below the levels imposed by the principal regulatory agencies. The PMTDS-based sorbent preparation is fast, easy and reproducible and the cartridges are less expensive than similar commercial SPE materials.     

Fully automated method for the liquid chromatographic-tandem mass spectrometric determination of cyproterone acetate in human plasma using restricted access material for on-line sample clean-up

A new automated method for the quantitative analysis of cyproterone acetate (CPA) in human plasma has been developed using on-line solid phase extraction (SPE) prior to the LC-MS/MS determination. The method was based on the use of a pre-column packed with internal-surface reversed-phase material (LiChrospher RP-4 ADS, 25 mm x 2 mm) for sample clean-up coupled to LC separation on an octadecyl silica stationary phase by means of a column switching system. A 30 microl plasma sample volume was injected directly onto the pre-column using a mixture of water, acetonitrile and formic acid (90:10:0.1 (v/v/v)) adjusted to pH 4.0 with diluted ammonia as washing liquid. The analyte was then eluted in the back-flush mode with the LC mobile phase consisting of water, methanol and formic acid (10:90:0.1 (v/v/v)). The dispensing flow rates of the washing liquid and the LC mobile phase were 300 microl min(-1). Medroxyprogesterone acetate (MPA) was used as internal standard. The MS ionization of the analytes was achieved using electrospray (ESI) in the positive ion mode. The pseudomolecular ionic species of CPA and MPA (417.4 and 387.5) were selected to generate daughter ions at 357.4 and 327.5, respectively. Finally, the developed method was validated according to a new approach using accuracy profiles as a decision tool. Very good results with respect to accuracy, detectability, repeatability, intermediate precision and selectivity were obtained. The LOQ of cyproterone acetate was 300 pg ml(-1).     

一种新型固相萃取柱结合超高效液相色谱-串联质谱法选择性富集测定猪肉中的盐酸克伦特罗

发展了一种测定猪肉中盐酸克伦特罗残留的简便、高效、准确的固相萃取-超高效液相色谱-串联质谱(SPE-UPLC-MS/MS)的方法。将搅碎的猪肉样品用5%(v/v)高氯酸超声提取,再以10000 r/min离心15 min后,上清液用SMCX固相萃取柱进行富集和净化。因SMCX是以硅胶为基质兼有反相/强阳离子交换的混合作用模式,因此可以有效地去除复杂基质干扰,达到目标样品的选择性富集和净化的目的。方法学结果表明,该方法在0.25～50 μg/kg范围内具有良好的线性关系,相关系数r为0.9982; 3个添加水平(1.25、12.5、50 μg/kg)的平均回收率为62.2%～ 72.0%,相对标准偏差(RSDs)为4.2%～ 6.1%;检出限(S/N=3)为0.05 μg/kg。所发展的样品前处理和检测方法简单、快速,可用于瘦肉精类成分的选择性富集和分离检测。     

Lowering the concentration limits of detection by on-line solid-phase extraction-capillary electrophoresis-electrospray mass spectrometry

The use of solid-phase extraction coupled on-line to capillary electrophoresis using electrospray mass spectrometry detection (SPE-CE-ESI-MS) is described for the analysis of peptides in dilute solutions. A SPE microcartridge or analyte concentrator containing C(18) derivatized silica particles as the extraction sorbent was easily constructed near the inlet of the separation capillary using commercially available materials. The reversed-phase sorbent selectively retained the target peptides, enabling large volumes of the sample to be introduced (>100muL). The captured analytes were eluted in a small volume of an appropriate solution (20-50nL). This resulted in sample clean-up and concentration enhancement, with minimum sample handling. As the SPE-CE conditions were compatible with on-line ESI-MS detection, the potential for identifying and characterizing the preconcentrated analytes by SPE-CE-ESI-MS using a sheath-flow CE-ESI-MS interface is also shown. Using separation electrolytes containing N-[carbamoylmethyl]-2-aminoethanesulfonic acid (ACES) at pH 7.4, an elution plug of 80:20 (v/v) (25mM of formic acid in MeCN):H(2)O and a sheath liquid of 20mM of acetic acid in 50:50 (v/v) methanol:H(2)O the concentration limits of detection for the analyzed peptides in the positive ion mode were lowered to nanogram per milliliter levels. The systematic optimization of the operational parameters involved in the development of the SPE-CE method is described in detail, in order to promote robust and quantitative SPE-CE-ESI-MS analysis and facilitate the widespread use of the technique.     

Imprinted functionalized silica sol-gel for solid-phase extraction of triazolamin

A triazolam-imprinted silica microsphere was prepared by combining a surface molecular-imprinting technique with the sol-gel process. The results illustrate that the triazolam-imprinted silica microspheres provided using γ-aminopropyltriethoxysilane and phenyltrimethoxysilane as monomers exhibited higher selectivity than those provided from γ-aminopropyltriethoxysilane and methyltriethoxysilane. In addition, the optimum affinity occurred when the molar ratio of γ-aminopropyltriethoxysilane, phenyltrimethoxysilane, and the template molecule was 4.2:4.7:0.6. Retention factor (k) and imprinting factor (IF) of triazolam on the imprinted and non-imprinted silica microsphere columns were characterized using high performance liquid chromatography (HPLC) with different mobile phases including methanol, acetonitrile, and water solutions. The molecular selectivity of the imprinted silica microspheres was also evaluated for triazolam and its analogue compounds in various mobile phases. The better results indicated that k and IF of triazolam on the imprinted silica microsphere column were 2.1 and 35, respectively, when using methanol/water (1/1, v/v) as the mobile phase. Finally, the imprinted silica was applied as a sorbent in solid-phase extraction (SPE), to selectively extract triazolam and its metabolite, α-hydroxytriazolam, from human urine samples. The limits of detection (LOD) for triazolam and α-hydroxytriazolam in urine samples were 30 ± 0.21 ng mL⁻¹ and 33 ± 0.26 ng mL⁻¹, respectively.     

Separation of antidepressants by capillary electrophoresis with in-line solid-phase extraction using a novel monolithic adsorbent

The separation of three selective serotonin reuptake inhibitors (SSRIs) by capillary electrophoresis (CE) with fully integrated solid-phase extraction (SPE) is described. Polymeric monolithic SPE modules were prepared in situ within a fused silica capillary from either butyl methacrylate-co-ethylene dimethacrylate or 3-sulfopropyl methacrylate-co-butyl methacrylate-co-ethylene dimethacrylate. Using a 1 cm SPE module placed at the inlet of the capillary, a mixture of sertraline, fluoxetine and fluvoxamine was extracted from aqueous solution by applying a simple pressure rinse. Under pressure-driven conditions, efficient elution was possible from both SPE materials investigated using 50 mM phosphate buffer, pH 3.5 in acetonitrile (20/80, v/v). Two different strategies were investigated for the efficient elution and subsequent CE separation. Injection of an aqueous sample plug directly into the non-aqueous elution/separation buffer was found to be unsuitable with poor elution profiles observed in the electrodriven mode. Alternatively, a sample plug equivalent to several capillary volumes could be injected by pressure followed by filling the capillary with the non-aqueous elution/separation buffer from the outlet end using a combination of pressure and electrodriven flow. Using a neutral monolith, efficient elution/separation was not possible due to an unstable electroosmotic flow (EOF), however, by adding the ionisable monomer, 3-sulfopropyl methacrylate to the SPE module to increase and stabilise the EOF, it was possible to achieve efficient elution from the SPE module, followed by baseline separation by CE using a 200 mM acetate buffer, pH 3.5 in acetonitrile (10/90, v/v). With enrichment factors of over 500 achieved for each of the analytes this demonstrates the potential of in-line SPE-CE for the sensitive analysis of these drugs.     

A Unique Solid Phase Extraction Column for Isolation of 11-Nor-Δ-9-Tetrahydrocannabinol-9-Carboxylic Acid in Human Urine

Abstract

A sensitive, specific, qualitative, and quantitative extraction procedure followed by an hplc assay of 11-nor-Δ-9-tetrahydrocannabinol-9-carboxylic acid (THC-COOH) from human urine is developed. Using a new, “mixed mode”, bonded silica gel solid phase extraction (SPE) column, the analyte was selectively isolated from the urine component. Following extraction, the presence of THC-COOH was confirmed and quantitated by a UV detector on a Varian 15cm C18 column using 35:65 v/v 50 mM phosphoric acid:acetonitrile at a flow rate of 1.5 mL/min. The limit of detection was 10 ng/mL at a signal to noise ratio of 2.5. The method showed linearity in the 10–300 ng/mL range (r=0.999) with good precision (RSD 1.4%) and accuracy (87% absolute recovery).     

Solid-phase extraction of phenols

Sample preparation for phenol analysis using solid-phase extraction (SPE) is reviewed. The scope of the review has been restricted to the literature dealing with the analysis of phenols as the main objective. The use, advantages and disadvantages of silica sorbents, polymeric, functionalized, carbon-based and mixed available sorbents, when applied to the separation and preconcentration of phenols, as well as the available experimental devices, are discussed. Other aspects such as phenol derivatisation prior to SPE, solid-phase microextraction, matrix effects and the storage of phenols in SPE cartridges, have been also discussed.     

固相萃取-气相色谱-质谱联用检测地沟油中胆固醇

建立了固相萃取-气相色谱-质谱联用(SPE-GC-MS)检测地沟油样品中胆固醇的分析方法。样品用硅胶固相萃取小柱前处理净化,先用20 mL含0.6%乙醚的正己烷溶液淋洗,再用10 mL含15%乙醚的正己烷溶液洗脱,胆固醇萃取率达97%。净化后的样品用配备电子轰击离子源的气相色谱-质谱联用仪进行测定,以保留时间和特征碎片离子定性,在选择离子监测模式下用外标法定量,选择离子为m/z 213、275、301、368、386,目标离子为m/z 386,参考离子为m/z 213和275。不同加标水平下的加标回收率为91.7%～101%,相对标准偏差(RSD)小于6%,检出限为0.01 mg/L。胆固醇质量浓度在0.24~6.0 mg/L范围内有良好的线性关系(相关系数为0.9996)。该法可精确检测油脂中胆固醇的含量,检测结果可作为判断其中是否掺有地沟油的依据之一。