Evaluation of new ionic liquids as high stability selective stationary phases in gas chromatography

Two ionic liquids (ILs), namely (S,S)-1-butyl-3-(2'-hydroxy-cyclohexyl)-3H-imidazol-1-ium tetrafluoroborate and (S,S)-1-butyl-3-(2'-acetyl-cyclohexyl)-3H-imidazol-1-ium tetrafluoroborate have been employed as stationary phases in capillary gas chromatography. These new phases exhibit a column efficiency of 1,600 and 2,100 plates m(-1) for IL 1 and IL 2, respectively, a wide operating temperature range and good thermal stability (bleeding temperature of 250 °C for IL 1 and 160 °C for IL 2). Inverse gas chromatography (GC) analyses were used to study the solvation properties of these ILs through a linear solvation energy model. The application of these ILs as new GC stationary phases was studied. These stationary phases exhibited unique selectivity for many organic substances, such as alkanes, ketones, esters, and aromatic compounds. The efficient separation of several mixtures containing compounds of different polarities and the good separation of fatty acid methyl esters (FAMEs) and cis/trans isomers indicate that these ILs may be applicable as a new type of GC stationary phases.     

Evaluation of the properties of polyethylene glycols as stationary phases in gas-liquid chromatography

This paper reports an evaluation of the retention characteristics of polyethylene glycols used as liquid phases in gas chromatography.Eight different grades of polyethylene glycol were tested (Carbowax 300, 400, 600, 1000, 1540, 4000, 6000 and 20M) and their retention volumes for various homologous series were measured (n-alkanes, l-alcohols, methyl alkyl ketones and linear chloro-, bromo- and iodoalkanes).Effects of the molecular weight, of temperature, and of the position of the hydroxyl group were examined, and the activity coefficients calculated.     

Cyclam complexes of Cu(II) and Co(II) as stationary phases for gas chromatography

New macrocyclic stationary chemically bonded phases were synthesized and tested in gas chromatography conditions. The complexes of 1,4,8,11-tetraazacyclotetradecane with Cu(II) and Co(II) were bonded to the silica support through the (3-chloropropyl)triethoxysilane reactant. The packings obtained were analyzed by diffuse-reflectance ultraviolet–visible spectroscopy (DRUV–Vis), differential thermal gravimetry (DTG), porosimetry, and elementary analysis. Preliminary study of the novel silica gas chromatography (GC) stationary phases containing cyclam complexes was carried out using packed 1/8 in. i.d. columns. The study was conducted on: cyclic, linear and branched olefins, aromatic hydrocarbons and ethers. Characterization of interactions between the compounds mentioned and new stationary phases was based upon analysis of Kováts retention indices (I), difference between retention indices for two phases (ΔI), and molecular retention indices (ΔM_e). Results have shown that the new stationary phases interact sufficiently strongly with molecules of high electron density and can be applied in capillary gas chromatography for the analysis of light hydrocarbons.     

Nucleosides as stationary phases for the separation of xylenol isomers by gas-liquid chromatography

Summary Adenosine, guanosine and inosine used as liquid phases in gas chromatography permits the separation of all six xylenol isomers.     

Chromatographic properties of tetramethyl-p-silphenylene-dimethyl,diphenylsiloxane copolymers as stationary phases for gas-liquid chromatography

Seven tetramethyl-p-silphenylene-dimethyl, diphenylsiloxane copolymers were coated on fused-silica capillary columns to evaluate their properties as stationary phases in gas-liquid chromatography. The capillary columns were tested concerning their selectivity, separation efficiency, column bleed, inertness, elution temperatures, and working range. The following characteristic properties of the silphenylene unit were found: (i) the impact of the silphenylene group on the chromatographic selectivity is similar to that of two dimethylsiloxy groups and half of a diphenylsiloxy group; (ii) silphenylene-siloxane copolymers offer reduced column bleed and increased maximum allowable operating temperature in comparison to polysiloxanes, since the backbone stiffing phenylene group enhances thermal stability; (iii) the elution temperatures of analytes are increased by 15-30 degrees C on silphenylene-siloxane copolymers compared to polysiloxanes; (iv) the silphenylene unit increases the glass transition temperature of the polymers resulting in elevated minimum allowable operating temperatures.     

Spectroscopy and the classification of liquid stationary phases in gas-liquid chromatography

Summary A table of data for acidity, basicity, polarity and London potential for stationary phases is given. These provide guidance in choosing a stationary phase for a given task from the 26 substances listed. The indices are calculated from infra-red shifts of 1-chlorobutane and the visible wavelength shifts of l₂ when they are dissolved in the stationary phases, from NMR estimates of acidity and basicity and from relative retention data. They replace the less reliable data of Burns and Hawkes. Methods of determining the indices are suggested that require only a gas chromatograph and can be applied by technicians with no specialized understanding of solution parameters. An attempt to add electron donoracceptor indices to the table was unsuccessful. A further table is given of the slopes of the log plots d(logt)/dC for use in extrapolating from one homologue to another on these stationary phases.     

Effects of solvent density on retention in gas-liquid chromatography. II. Polar solutes in poly(ethylene glycol) stationary phases

Effects of solvent density on the solubility of polar probes which undergo specific interactions with poly(oxyethylene) are studied. The analysis of retention data on capillary columns coated with oligomeric poly(oxyethylene) stationary phases shows that, within the experimental error, the enthalpic contribution to the solubility is practically independent of variations in the solvent density. Average values of enthalpies of solute transfer are reported for different probes and temperatures. The observed systematic decrease of solubility with the increasing density is due to a change of entropy. Some thermodynamic consequences inferred from these general results are discussed. One relevant observation is that the influence of solvent's final groups must be negligible. This is even the case for oligomers with number-average degrees of polymerization as low as 13, hosting solutes capable of strong interactions with the end hydroxyl groups of linear poly(ethylene glycols). Possible explanations for this behavior are explored through molecular dynamics simulations of the liquid solvent.     

Some new selective stationary phases for RP-HPLC

At the present time, more complex analyses of apolar compounds with similar chemical structures or of polar compounds, especially basic ones, having diverse properties require more selective stationary phases having better stabilities. This paper describes several new stationary phases with directed selectivities that were prepared by immobilizing two different phenyl group-containing siloxanes and a trifluoropropyl-containing siloxane onto chromatographic silica and, in the case of the fluorinated siloxane, onto zirconized silica, using thermal treatment or microware radiation. The chromatographic properties and stabilities of these new phases were determined and several applications were evaluated. The phenyl-containing phases showed excellent characteristics related to the separation of several different types of aromatic compounds while the fluorinated phases, which present a more polar character, revealed selectivity for the separation of positional isomers as well as for a mixture of basic pharmaceuticals. Stability tests indicate that immobilization of the polysiloxanes increases column lifetimes by making the stationary phases less susceptible to dissolution, while the phases immobilized with microwave radiation were somewhat more stable than those immobilized by thermal treatments.     

Solubility of some carrier gases in stationary liquid phases used in gas-liquid chromatography

A simple gas chromatographic technique for the determination of the solubility of gases in low-volatile liquids was proposed. The procedure is based on the introduction of a certain volume of the liquid saturated with the gas at atmospheric pressure into a gas chromatograph. The solubility of carrier gases (helium, hydrogen, nitrogen, methane, and carbon dioxide) in various stationary liquid phases (SLP), such as pentadecane, polydimethylsiloxane PMS-100, and polyethylene glycol PEG-600, was studied. The carrier gases studied can be arranged in the following series by solubility in SLP: He<H₂<N₂<CH₄<CO₂. This order coincides with the series reflecting change in the retention values in GLC for different carrier gases. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 923–925, May, 1999.     

Underivatized amylose and cellulose as new stationary phases for hydrophilic interaction chromatography

Two polysaccharide stationary phases have been newly suggested for application in hydrophilic interaction chromatography (HILIC). Both columns (amylose‐silica, 250 × 4.6 mm, 5 μm and cellulose‐silica, 250 × 4.6 mm, 5 μm) demonstrated a satisfactory retention of polar compounds. The influence of the mobile‐phase composition (acetonitrile content, pH, salt concentration) on the retention was in agreement with the HILIC concept. The phases showed a very similar behavior, typical efficiency of about 50 000 plates/m, cellulose retained test compounds somewhat more strongly. Under the experimental conditions, electrostatic (non‐HILIC‐type) interactions due to the dissociation of silanol groups on the silica surface did not influence the retention, noticeably. The applicability of polysaccharide stationary phases for the chromatography of polar compounds was proven by the separation of mixtures of sugars (fructose, glucose, saccharose, maltose, trehalose) or vitamins (nicotinamide, pyridoxine, riboflavin, thiamine, nicotinic acid, ascorbic acid).     

Polymer coatings as stationary phases in high-performance liquid chromatography

Modern biochromatography demands highly sophisticated packing materials in terms of biocompatibility, (substrate-) selectivity and recovery. Polymers can be designed in a wide variety and therefore deliver solutions to specific chromatographic problems. Thus, tailor-made polymer coatings are an alternative to the classical chemically bonded stationary phases.     

Poly(alkylmethylsiloxanes) thermally immobilized on silica as stationary phases for high-performance liquid chromatography

Modifications have been made to the method of ion-exclusion pre-separation followed by ion exchange with conductivity detection for the determination of trace levels of chloride, sulfate and nitrate in concentrated phosphoric acid. Ion-exclusion separation and pre-concentration of impurity anions is performed using Dionex AS6-ICE and AS11-HC (4 mm) columns, respectively, with water eluent. Final separation is performed using Dionex AG11-HC and AS11-HC (2 mm) columns, KOH gradient elution, and suppressed conductivity detection. Improvements to the method include addition of an autosampler and eluent generator, and use of external standard calibration. These instrumental and procedural changes significantly improve the method's throughput, while the method's capability relative to phosphoric acid specifications is maintained, as verified through statistical evaluation of control sample analyses. Detection limits of 60, 680, and 4,0 ppb (w/w) are obtained vs. semiconductor-grade phosphoric acid specifications of 1000, 12,000, and 5000 ppb for chloride, sulfate, and nitrate, respectively.     

Crosslinked methylphenylsilicones as stationary phases for capillary gas chromatography

Summary Methyl(phenyl)silicones offer useful selectivities when used as stationary phases in gas chromatography (GC). Such phases have, however, hitherto been of restricted importance in capillary GC due to the lack of phases having a viscosity high enough to ensure stationary phase film stability. Further, to utilize fully the possibilities of a methyl(phenyl)silicone capillary column, it must also possess high efficiency and a high degree of deactivation.In this work, the preparation of soda-glass capillary columns coated within situ cured methyl(phenyl) and methyl(tolyl)-silicones is presented. Vulcanization was made possible by the introduction of some vinyl substitution in the gum to be cured: tolyl-containing gums could be cured without the presence of vinyl groups. In addition, fused silica capillary columns coated with OV-1701 were prepared.The columns show a coating efficiency of above 80%, a thermal stability up to 320 °C and a high degree of deactivation. Their utility is demonstrated by the separation of samples containing polynuclear aromatics, antidepressants and some potent mutagens.Presented at the 14th International Symposium on Chromatography London, September, 1982     

New stationary phases for normal-phase high-performance liquid chromatography (NP-HPLC)

3-(2,3-Dihydroxy-propoxy)-propyl-silica (diolsilica) was modified to bonded stationary phases for normal-phase high-performance liquid chromatography (NPLC) carrying phosphorous ester, boronic ester, and nitric acid ester groups. The NPLC phases were investigated with respect to their properties towards separations of polyaromatic hydrocarbons, and chlorinated and nitrated environmental pollutants. Aminopropyl-silica and nitrooxy-propyl-silica (the latter synthesized in our working group) are presented for comparison. Depending on the functionality used for the modification the retention behavior can significantly be changed towards the three analyte classes. Especially 2,2,2-tribromoethyl-phosphoromorpholino-chloridate modified diol-silica, 2,2,2-tribromoethyl-dichlorophosphate modified diol-silica and nitrated diol-silica (nitrooxy-propoxypropyl-silica) show specific properties for the separation of polyaromatic hydrocarbons, chlorinated analytes and nitrated analytes. Preparation and packing of the adsorbents are described. Principal Component Analysis (PCA) is used as a chemometric tool for effective data reduction and visualization of the results in terms of retention behavior of the stationary phases. Received: 4 August 1997 / Revised: 3 December 1997 / Accepted: 7 December 1997