Buckling analysis of stringer-stiffened laminated cylindrical shells with nonuniform eccentricity

In this study, the influence of nonuniformity of eccentricity of stringers on the general axial buckling load of stiffened laminated cylindrical shells with simply supported end conditions is investigated. The critical loads are calculated using Love’s First-order Shear Deformation Theory and solved using the Rayleigh-Ritz procedure. The effects of the shell length-to-radius ratio, shell thickness-to-radius ratio, number of stringers, and stringers depth-to-width ratio on the buckling load of nonuniformly eccentric shells, are examined. The research demonstrates that an appropriate nonuniform distribution of eccentricity of stringers leads the buckling load to increase significantly.     

Torsional buckling of spherical shells under circumferential shear loads

ＩｎｔｒｏｄｕｃｔｉｏｎＩｍｐｏｒｔａｎｔａｐｌｉｃａｔｉｏｎｓｏｆｔｈｅｓｔａｂｉｌｉｔｙａｎａｌｙｓｉｓｏｆｓｈｅｌｓｃａｎｂｅｆｏｕｎｄｉｎｔｈｅｍｏｄｅｒｎｅｎｇｉｎｅｒｉｎｇｒａｎｇｉｎｇｏｖｅｒｔｈｅａｅｒｏｓｐａｃｅ,ｍａｒｉｎｅ,ａｒ...     

A numerical calculation of dynamic buckling of a thin shallow spherical shell under impact

Assuming the deformation of the shell has an axial symmetrical form, we transform Marguerre's equations into difference equations, and use these equations to discuss the buckling of an elastic thin shallow spherical shell subjected to impact loads. The result shows when impact load acts on the shells, a jump of the shell takes place dependent on the values λ and the critical buckling load increases with the enlargement of the loading area.     

On dynamic buckling phenomena in axially loaded elastic-plastic cylindrical shells

Some characteristic features of the dynamic inelastic buckling behaviour of cylindrical shells subjected to axial impact loads are discussed. It is shown that the material properties and their approximations in the plastic range influence the initial instability pattern and the final buckling shape of a shell having a given geometry. The phenomena of dynamic plastic buckling (when the entire length of a cylindrical shell wrinkles before the development of large radial displacements) and dynamic progressive buckling (when the folds in a cylindrical shell form sequentially) are analysed from the viewpoint of stress wave propagation resulting from an axial impact. It is shown that a high velocity impact causes an instantaneously applied load, with a maximum value at t=0 and whether or not this load causes an inelastic collapse depends on the magnitude of the initial kinetic energy.     

Axial compression buckling of conical and cylindrical shells

Experiments on the axial compression buckling of high-quality epoxy cylindrical shells with imposed dimpletype defects are described. Additionally, a technique for the manufacture of high-quality epoxy conical shells which buckle at loads approaching the classical critical load is presented. For both types of shells, prebuckling deformations have been monitored optically. The sizes of defects determined from the optical examination when applied in the space-frame approach to shell buckling have led to predicted knock-down factors which are remarkably consistent with measured knock-down factors (i.e., the ratio of actual collapse to classical critical load).     

Effects of imperfections on the buckling response of compression-loaded composite shells

The results of an experimental and analytical study of the effects of initial imperfections on the buckling and postbuckling response of three unstiffened thin-walled compression-loaded graphite-epoxy cylindrical shells with different orthotropic and quasi-isotropic shell-wall laminates are presented. The results identify the effects of traditional and non-traditional initial imperfections on the non-linear response and buckling loads of the shells. The traditional imperfections include the geometric shell-wall mid-surface imperfections that are commonly discussed in the literature on thin shell buckling. The non-traditional imperfections include shell-wall thickness variations, local shell-wall ply-gaps associated with the fabrication process, shell-end geometric imperfections, non-uniform applied end loads, and variations in the boundary conditions including the effects of elastic boundary conditions. A high-fidelity non-linear shell analysis procedure that accurately accounts for the effects of these traditional and non-traditional imperfections on the non-linear responses and buckling loads of the shells is described. The analysis procedure includes a non-linear static analysis that predicts stable response characteristics of the shells and a non-linear transient analysis that predicts unstable response characteristics.     

圆柱壳稳定性问题的研究进展

圆柱壳是工程实际中广泛应用的结构,其主要破坏形式是屈曲失稳．作为力学领域的经典问题,圆柱壳稳定性问题的研究非常之多．其中,受均匀轴向压力的圆柱壳由于临界屈曲载荷的理论预测值与早期试验结果之间的巨大差异,更是推动了壳体稳定性理论的不断发展．本文简要回顾了壳体稳定性理论的发展和分类,并对轴压圆柱壳体试验结果分散且远低于理论预测值的原因及含缺陷圆柱壳体的稳定性研究方法进行了总结,然后综述了地下空间顶管、储油罐、加筋圆柱壳及脱层圆柱壳等实际工程中广泛应用的圆柱壳结构稳定性研究的现状和趋势,最后展望了将来对工程应用中圆柱壳结构的稳定性研究的难点和方向．     

?????????????????????????

通过对拱顶储罐罐壁承受轴向载荷、初始几何缺陷及轴压失稳状况研究,指 出在固定顶罐设计、建造和运行各阶段都应进行罐壁轴压稳定性校核. 根据圆柱薄壳稳定性 理论和轴压失稳临界应力数值分析计算结果,提出固定顶罐罐壁轴压稳定性校核方法和数学 模型,并运用回归分析方法建立罐壁轴压失稳临界应力计算公式. 对几种常用规格的拱顶罐 有初始挠度缺陷罐壁轴压稳定性分析表明：随储罐容积和罐壁初始挠度增大,罐壁轴压稳定 性呈减弱趋势.     

安全壳中钢衬壳热屈曲问题理论与实验研究(I)———理论分析部分

钢衬壳热屈曲问题是核工程安全壳设计中的主要问题把铆固之间的钢衬壳视为钢衬板的特殊缺陷形式，利用Ｋｏｉｔｅｒ初始后屈曲理论分析了完善和具有初始缺陷钢衬壳的弹性热后屈曲性态给出了用挠度－温度载荷表示的钢衬壳的后屈曲平衡路径表达式和屈曲临界载荷表达式具体分析了三种钢衬壳模型：四点铆固钢衬壳、四边固支钢衬壳和五点铆固钢衬壳给出了钢衬的初始缺陷、锚钉间距、钢衬厚度等参数对钢衬热屈曲载荷的影响结果对安全壳中钢衬壳的设计有很好的参考价值     

在轴向应力波传播和反射过程中弹性有限长圆柱壳非对称动态屈曲

本文讨论弹性有限长圆柱壳端部受冲击载荷作用，在轴向应力波传播和反射过程中的非对称动态屈曲问题。通过建立和求解扰动方程得到了动态屈曲的分叉条件，临界载荷和屈曲模态。数值结果表明：当壳壁厚不很薄时，轴对称屈曲临界载荷比非轴对称临界载荷高；反之，轴对称临界载荷会比非对称临界载荷低；由于应力波的反射，临界载荷降低，因而更容易发生屈曲，屈曲模态也有其不同特点。     

A genetic algorithm optimization of ring-stiffened cylindrical shells for axial and radial buckling loads

In this research, the general axial and radial buckling optimization of ring-stiffened cylindrical shells is implemented by the genetic algorithm (GA). The stiffened shell is subjected to four constraints including the fundamental frequency, the structural weight, the axial buckling load, and the radial buckling load. In addition, six design variables including shell thickness, number of stiffeners, stiffeners width and height, stiffeners eccentricity distribution order, and stiffeners spacing distribution order are considered. In analytical solution, the Ritz method is applied and stiffeners are treated as discrete elements. The effect of the weighting coefficients of the objective functions on the optimum solution is studied. The results show that optimized stiffening a cylindrical shell leads to a lower structural weight, higher natural frequencies, and larger axial and radial buckling loads, simultaneously. In addition, the upper and lower bounds of the design variables influence the optimum results considerably. It is also found that the distributions of eccentricity and spacing of the stiffeners influence the magnitudes of the axial and radial buckling loads considerably.     

A new technique for the prediction of buckling loads from nondestructive vibration tests

The paper presents a new technique for the prediction of buckling loads of structural elements with postbuckling unstable characteristics such as cylindrical shells. The technique introduced is based on the cubic parametric curve defined by the Hermite form,¹ which is described in the paper. The technique requires as input the data obtained from vibration tests carried out on structural elements under compressive loading, specifically, the values of the applied load and the square of the measured corresponding natural frequency of vibration. The proposed technique is applied to a simplified cylindrical shell model² and two cylindrical shells.³ A comparison between the predicted and the exact values of the buckling loads is presented for each case discussed in the paper, highlighting the accuracy of the proposed technique.     

Vibrations and buckling of axially loaded stiffened cylindrical shells with elastic restraints

A theory is derived for calculation of the influence of elastic edge restraints on the vibrations and buckling of stiffened cylindrical shells. The stiffeners are considered “smeared” and the edge restraints can be axial, radial, circumferential or rotational. Extensive computations are performed for special kinds of stringer-stiffened shells, and the theoretical predictions are compared with experimental results. A method of definition of equivalent elastically restrained boundary conditions by use of vibration tests is discussed. Application of this technique to tests on 10 shells significantly reduces the scatter in the ratio of experimental to predicted buckling loads.     

Studies of nonlinear deformation and stability of oval and elliptic cylindrical shells under axial compression

The stability of noncircular shells, in contrast to that of circular ones, has not been studied sufficiently well yet. The publications about circular shells are counted by thousands, but there are only several dozens of papers dealing with noncircular shells. This can be explained on the one hand by the fact that such shells are less used in practice and on the other hand by the difficulties encountered when solving problems involving a nonconstant curvature radius, which results in the appearance of variable coefficients in the stability equations. The well-known solutions of stability problems were obtained by analytic methods and, as a rule, in the linear approximation without taking into account the moments and nonlinearity of the shell precritical state, i.e., in the classical approximation. Here we use the finite element method in displacements to solve the problem of geometrically nonlinear deformation and stability of cylindrical shells with noncircular contour of the transverse cross-section. We use quadrilateral finite elements of shells of natural curvature. In the approximations to the element displacements, we explicitly distinguish the displacements of elements as rigid bodies. We use the Lagrange variational principle to obtain a nonlinear system of algebraic equations for determining the unknown nodal finite elements. We solve the system by a step method with respect to the load using the Newton-Kantorovich linearization at each step. The linear systems are solved by the Kraut method. The critical loads are determined with the use of the Silvester stability criterion when solving the nonlinear problem. We develop an algorithm for solving the problem numerically on personal computers. We also study the nonlinear deformation and stability of shells with oval and elliptic transverse cross-section in a wide range of variations in the ovalization and ellipticity parameters. We find the critical loads and the shell buckling modes. We also examine how the critical loads are affected by the strain nonlinearity and the ovalization and ellipticity of shells.     

Nonsymmetric buckle patterns in progressive plastic buckling

This paper presents the results of a series of experiments on the progressive plastic buckling of cylindrical shells under axial compressive load. It shows that, for shell bodies with anR/t less than 100, the normal axisymmetric ring buckling will develop into nonsymmetric patterns. We demonstrate that there exists also a class of shells within this thickness-radius range for which nonsymmetric plastic buckling always occurs without the prior formation of a ring. It appears from the limited number of tests made that, for a particularR, R/t, material and rate of loading, there is a critical value ofL, above which there is a high probability of the buckle pattern developing in a nonsymmetric fashion. It seems probable, too, that there are bands ofR/t for a particularL/R, R, material and rate of loading for which the buckle number will be constant. The experiments tend to indicate that the postbuckling efficiency of the shell decreases with increasing buckle number. The nonsymmetric patterns demonstrated appear to be inextensional deformations. They are very similar in character to the Yoshimura pattern which occurs as the limiting case for thin shells in axial compression and, under impact loading. Load-displacement histories are presented for some of the various modes of failure demonstrated.     

Koiter circles in the buckling of axially compressed conical shells

As is well known, the elastic stability of shell structures under certain loading conditions is characterised by a severely unstable postbuckling behaviour. The presence of simultaneous buckling modes (‘competing’ modes corresponding to the same critical buckling load) is deemed to be largely responsible for such a behaviour. In the present paper, within the framework of the so-called classical theory (linear bifurcation eigenvalue analysis), the buckling behaviour of axially compressed cylindrical shells is firstly reviewed. Accordingly, doubly periodic eigenvectors (buckling modes) corresponding to the same eigenvalue (critical buckling load) can be determined, and their locus in a dimensionless meridional and circumferential buckling wavenumber space is described by a circle (known as the Koiter circle). In the case of axially compressed conical shells, no clear evidence of the existence of simultaneous buckling modes can be found in the literature. Then, such a problem is studied here via linear eigenvalue finite element analyses, showing that simultaneous doubly periodic modes do also occur for cones, and that their locus in a specifically defined dimensionless wavenumber space can be described by an ellipse (hereafter termed as the Koiter ellipse) whose aspect ratio is dependent on the tapering angle of the cone.     

薄壳失稳机理浅析

对薄壳失稳问题研究的理论与实验成果进行了总结和讨论，对薄壳后屈曲理论研究结果提出了不同的看法，同时应用动力学原理对薄壳失稳问题进行了探讨，并建立了计算模型。文中应用动力学原理描述了从加载初期的一个呈现静力学特征的薄壳随荷载的增加而逐渐成为一个呈现动力学特征的薄壳的过程，从薄壳受扰振动乃至共振的角度解释了失稳临界荷载实验数据值及其离散并低于失稳临界荷载理论值的原因。     

Stability of Orthotropic Corrugated Cylindrical Shells

A technique for stability analysis of cylindrical shells with a corrugated midsurface is proposed. The wave crests are directed along the generatrix. The relations of shell theory include terms of higher order of smallness than those in the Mushtari–Donnell–Vlasov theory. The problem is solved using a variational equation. The Lamé parameter and curvature radius are variable and approximated by a discrete Fourier transform. The critical load and buckling mode are determined in solving an infinite system of equations for the coefficients of expansion of the resolving functions into trigonometric series. The solution accuracy increases owing to the presence of an aggregate of independent subsystems. Singularities in the buckling modes of corrugated shells corresponding to the minimum critical loads are determined. The basic, practically important conclusion is that both isotropic and orthotropic shells with sinusoidal corrugation are efficient only when their length, which depends on the waveformation parameters and the geometric and mechanical characteristics, is small     

轴向冲击载荷作用下弹性圆柱壳横向弯曲动态屈曲

研究在轴向冲击载荷下弹性圆柱壳动态屈曲问题.通过构造哈密顿体系,在辛空间中将临界载荷和动态屈曲模态归结为辛本征值和本征解问题.辛本征解反映了局部的压缩屈曲模态和整体的弯曲屈曲模态,特别是在冲击端为自由支承边界时的特殊屈曲方式.数值结果给出了具体的临界载荷和屈曲模态规律.     

Buckling of spherical sandwich shells

An experimental investigation was carried out to determine the critical buckling loads of several shallow spherical sandwich shells. A cold-forming process simultaneously using pressure and vacuum was employed to manufacture the nearly perfect spherical facing layers from 5052 aluminum-alloy sheets of 0.006 and of 0.008-in. thicknesses. Eight shallow spherical-shell specimens of 20-in. base diameter and of 20 and 30-in. radii with 1/8 and 1/4-in. thickness of “Flexcore” have been tested in a 300-psi autoclave specifically designed for these experiments. The pressure on shells was developed by the differential pressure between the inner and the outer chambers separated by the shell being tested. When the inner chamber was maintained at atmospheric pressure and gas pressure was applied in the outer chamber, the testing procedure was termed “soft.” Alternatively, the inner chamber would be filled with fluid with the outer chamber remaining filled with gas. By initially pressurizing both chambers equally, a load on the shell could be developed by the differential pressure due to controlled bleeding of the fluid inside the inner chamber, while the gas in the outer chamber was maintained at the initial pressure. This is an accurate volume-control experiment and this testing procedure was termed “hard.” In the latter case, it was possible to monitor the displacements of the shell for each load increment with a nest of clip gages of an unique design. It was found that there is no substantial difference in the buckling loads between the hard and “soft” systems. All shells buckled in the plastic range. A reasonably good correlation is obtained with a linear theory using the double modulus for the sandwich segments.