Dynamics of biphotonic intensity holographic gratings based on dye-doped liquid crystal films

The dynamics of biphotonic intensity holographic gratings (BIHGs) based on dye-doped liquid crystal (DDLC) films, including optical and thermal effects, are studied. Experimental results indicate that the formation of a BIHG involves bulk reorientation and surface adsorption. The former yields a transient biphotonic grating; the latter results in a persistent biphotonic grating. Additionally, the dynamic behaviours of the biphotonic diffraction signals are different from those of a conventional one-photonic diffraction signal, and depend on the intensity(polarization) of the green(red) pump-beam. The effect of ambient temperature on the diffraction efficiency of a BIHG is also studied: a higher ambient temperature prevents more dye molecules from being adsorbed on the substrate.     

Side-on liquid crystal polyacrylate in Langmuir-Blodgett films

A side-on fixed liquid crystal polyacrylate has been investigated in Langmuir and Langmuir-Blodgett (LB) films. High in-plane orientation of the mesogenic groups has been observed within the LB multilayers, showing the ability of the LB technique to align a liquid crystal. The analysis of the in-plane order versus the dipping speed suggests some self-aggregation of the polymer in the monolayer. Within these aggregates, the molecular orientation (in-plane and out-plane) has been deduced from infrared dichroism experiments; the mesogenic group lies mainly parallel to the dipping direction and relatively flat on the substrate. This alignment of the polymer is however partially lost with time, leading to materials with less in-plane anisotropy.     

Self-screening of Langmuir-Blodgett films by a discotic micellar lyotropic liquid crystal

The influence of the surface treatment on the anisotropic part of the surface tension of a lyotropic discotic micellar nematic liquid crystal doped with ferrofluid is analysed. The treatment involves Langmuir-Blodgett (LB) films deposited on the glass substrates. Textural observations and phase-shift measurements of the transmitted light were carried out. A phenomenological model which allows calculation of the director average orientation in the bulk and at the surfaces is used for interpreting the experimental data. Our results show that the average director alignment depends on the concentration of the magnetic grains of ferrofluid at the glass surfaces. On the contrary, it is practically independent of the nature of the molecule deposited on the glass substrate. According to the model, the flat glass surface, independently of the treatment or the absence of any treatment, stabilizes onto itself a lamellar layer (or bilayer) formed by the amphiphilic molecules of the liquid crystal. This layer screens the effect of the LB film (or of the pure untreated substrate) on the alignment of the lyotropic nematic mesophase.     

Characterization of Langmuir-Blodgett films of a ferroelectric liquid crystal

Molecular orientation, structure, and phase transition behaviors in Langmuir-Blodgett (LB) and cast films of a ferroelectric liquid crystal of sec-butyl 6-(4-(nonyloxy)benzoyloxy)-2-naphthoate (FLC-1) are determined by ultraviolet (UV) spectroscopy, X-ray diffraction, and infrared (IR) spectroscopy. It is found that the orientation angle of chromophores theta in LB films is 41 degrees from the surface normal. The tilt angle of the chromophore changes at 56, 70, and 88 degrees C, respectively, which denotes the presence of phase transitions. Two kinds of layered or isomeric crystal structures of the LB films with layer spacings of 3 and 3.5 nm at room temperature have been found while the latter disappears above 45 degrees C, as confirmed by measurement of temperature-dependent IR spectra.     

A low temperature phase transition in Langmuir-Blodgett films

The influences of temperature on the SFG spectra of Langmuir-Blodgett films of cadmium stearate, ferric stearate, stearic acid and octadecanamide are reported. Upon cooling, all films display reversible discontinuous shifts of approximately 8 cm (-1) in the r+, r- and rfermi modes of the terminal methyl groups at approximately 150 K. Reversible changes in the relative intensities of these methyl group peaks, most pronounced in the PPP spectra, are also observed and attributed to a change in the environment of the methyl group that accompanies a discontinuous transition in the ordering of their alkyl chains. The onset of new spectral features at higher frequency is attributed to the observation of ordered water molecules contained within the films. The correlation between the onset of the water features and the onset of the reversible, discontinuous, spectroscopic changes of the amphiphiles argues for a causal connection between the two. In addition to the discontinuous behavior upon cooling, monolayer films of stearic acid and octadecanamide display activity of methylene modes upon exposure to vacuum. Films displaying SFG-active methylene groups at room temperature had them gradually become completely SFG-inactive by 100 K. Heating the films to room temperature revealed that the methylene group activity was reversible. Monolayer films of cadmium stearate and ferric stearate do not display this methylene activity upon exposure to vacuum, suggesting that this behavior may be linked to solvation of the amphiphile's headgroup. These observations suggest that water plays a key role in the stability and structure of LB supported monolayers, and have important implications to those interested in low temperature (cryogenic) effects of biological systems.     

Photoinduced two-dimensional gratings based on dye-doped cholesteric liquid crystal films

This work elucidates photoinduced two-dimensional (2D) gratings in dye-doped cholesteric liquid crystal films. The helical pitch is increased by green-beam-induced trans-cis isomerization and a concomitant thermal effect. Two-dimensional gratings appear when the green beam is turned off. Grating formation results from elastic instability caused by restored strain arising from helical pitch reduction. Grating lifetime increases as green beam intensity increases and declines under irradiation with a strong red beam. Variation in grating spacing with green intensity with various pitches is also examined.     

Investigation of alignment mechanism of liquid crystal on polyimide Langmuir-Blodgett films by scanning tunnelling microscopy

The homogeneous alignment of a liquid crystal material, 4'-n-octyl-4-cyanobiphenyl (8CB), was achieved by polyimide Langmuir-Blodgett (LB) films. Scanning electron microscopy and scanning tunnelling microscopy measurements show that the alignment of the polyimide LB films with a grooveless surface occurs due to the orientation of the polyimide chains. We directly observe 8CB monolayers on oriented polyimide LB films. We find that the monolayers form a two dimensional crystalline structure and the 8CB molecules are always aligned along the chain direction of the polyimide. The results show that the alignment of 8CB molecules arises by an epitaxial growth on the oriented polyimide LB films.     

Diffusion kinetics investigations of Nano Ag-doped holographic polymer dispersed liquid crystal gratings

ABSTRACT

In this paper, we use multicomponent mutual diffusion method to derive a one-dimensional non-local diffusion dynamic model to describe the diffusion kinetics of a dynamic holographic polymer dispersed liquid crystal grating (H-PDLC) doped with nano-silver. The physical mechanism of diffusion between monomer and liquid crystal, monomer and nano-silver particles is analysed using this model. Using coupled-wave theory, the H-PDLC’s diffraction efficiency curve with the expose time are simulated due to the vivid changing of effective refractive index modulation caused by the movement of concentration of each component with the expose time. Correspondingly, in the experiment, the diffraction efficiency of the grating is measured in real time, which shows the improvement for the holographic properties because of nano-silver doped H-PDLC. The simulation results have a good agreement with experimental data by fitting the corresponding parameters of the model. In addition, through comparing with simulation and experimental results with doping different concentrations of nano-silver particles, the recipe and diffraction characteristics of H-PDLC grating can be improved. Thus, the diffusion Kinetics model can be used to optimise the phase separation of the PDLC grating, and finally to improve the opto-electrical properties of H-PDLC gratings.     

Investigation of alignment mechanism of liquid crystal on polyimide Langmuir-Blodgett films by scanning tunnelling microscopy

Abstract

The homogeneous alignment of a liquid crystal material, 4′-n-octyl-4-cyanobiphenyl (8CB), was achieved by polyimide Langmuir-Blodgett (LB) films. Scanning electron microscopy and scanning tunnelling microscopy measurements show that the alignment of the polyimide LB films with a grooveless surface occurs due to the orientation of the polyimide chains. We directly observe 8CB monolayers on oriented polyimide LB films. We find that the monolayers form a two dimensional crystalline structure and the 8CB molecules are always aligned along the chain direction of the polyimide. The results show that the alignment of 8CB molecules arises by an epitaxial growth on the oriented polyimide LB films.     

Liquid crystal codendrimers with a statistical distribution of phenolic and mesogenic groups: behavior as Langmuir and Langmuir-Blodgett films

The first series of carbosilane liquid crystal codendrimers with groups of different polarity has been synthesized. The chemical structure of the newly synthesized materials and the composition of the codendrimers were studied by NMR spectroscopy and MALDI-TOF MS. It was found that the codendrimers tend to form stable Langmuir films at the air-water surface. The influence of composition and generation number on surface pressure-surface area isotherms and film stability was studied. Brewster angle microscopy confirmed the different phase behavior for monolayers of different codendrimer composition and generation number. It was found that side groups of fifth-generation codendrimers do not segregate, unlike those of lower generations. Langmuir-Blodgett films on solid substrates were obtained by the vertical dipping method. X-ray diffraction showed that the codendrimers with 75% of hydrophobic mesogenic terminal groups formed ordered layers parallel to the substrate.     

Alignment of a nematic liquid crystal using substituted calixarene Langmuir-Blodgett films

The alignment of a nematic liquid crystal (5CB) induced by several substituted calixarene-based films is reported. Calixarene molecules consisting of four or six moieties and different substituents (acyl and azobenzene groups) were synthesized. Films of such molecules were deposited using a Langmuir-Blodgett technique onto glass plates and were characterized using atomic force microscopy. These treated plates were used to prepare liquid crystal cells, and the overall alignment studied. In the case of photosensitive molecules, photoinduced reorientation experiments were undertaken and are reported. It is shown that it is not important to have a large number of interacting sites on the surface to induce a reorientation of the liquid crystal.     

Alignment of a nematic liquid crystal using substituted calixarene Langmuir-Blodgett films

The alignment of a nematic liquid crystal (5CB) induced by several substituted calixarene-based films is reported. Calixarene molecules consisting of four or six moieties and different substituents (acyl and azobenzene groups) were synthesized. Films of such molecules were deposited using a Langmuir-Blodgett technique onto glass plates and were characterized using atomic force microscopy. These treated plates were used to prepare liquid crystal cells, and the overall alignment studied. In the case of photosensitive molecules, photoinduced reorientation experiments were undertaken and are reported. It is shown that it is not important to have a large number of interacting sites on the surface to induce a reorientation of the liquid crystal.     

X-ray investigations of Langmuir-Blodgett multilayer films of side-chain liquid crystal copolymers

X-ray reflectivity studies on Langmuir-Blodgett multilayer films of side-chain liquid crystal polymers are reported. The films have a high degree of lamellar order. The layer periodicity is independent of the type of monolayer deposition, implying a reorientation of the side group mesogens following the deposition process. X-ray reflectivity from thin films displays subsidiary maxima permitting a quantitative measure of the change in side-chain density between multilayer and monolayer. A unit cell density profile is calculated for thick films assuming a symmetric unit cell.     

Biphotonic recording effect of polarization gratings based on dye-doped liquid crystal films

This study investigates a holographic recording effect of biphotonic polarization gratings (BPGs) written on dye-doped liquid crystal (DDLC) films. One linearly polarized green light (λ_G = 514.5 nm) and a polarization-modulated interference pattern formed by two mutually coherent orthogonal (±45° with respect to the polarization of the green light) polarized red lights simultaneously excite the DDLC films to generate a BPG. The formation of BPGs depends primarily on the dichroism of the dye molecules and a sequence of mechanisms: photoisomerization, anisotropic adsorption and inhibition of dye adsorption. The cis-isomer absorbance-modulated distribution associated with the red polarization-modulation pattern induces the dye adsorption-modulated pattern, in turn, yielding the permanent BPG which generates a modulated twisted nematic (TN) structure pattern in the sample. It is found that each BPG is verified to be electrically switchable and thermally erasable. The switching time is in the order of milliseconds. Additionally, the recording time to form a BPG decreases with increasing intensity of the green pump beam.     

Small dosage of holographic exposure via a He-Ne laser to fabricate tunable liquid crystal phase gratings operated with low electric voltages

The fabrication processes of tunable liquid crystal (LC) phase gratings via small dosage of holographic exposure of a He-Ne laser beam were investigated. The initial LC cells were filled with various ratios of ingredients mainly including LCs and photocurable monomers. The fabricated LC phase gratings shown in the Raman–Nath regime possessed a maximum value of first-order diffraction efficiency close to 33.3% at 5.8 V_rms. Furthermore, optimised grating was demonstrated and used as an interference recorder in holography.     

In-plane orientation controlled by a rotating disc in Langmuir and Langmuir-Blodgett films of a merocyanine dye

When a Langmuir film consists of mesoscopic domains having an elongated shape, stretching of the film due to Langmuir-Blodgett (LB) deposition and shearing due to a rotating disc can induce in-plane orientations of these domains. When the former governs the phenomenon, the domains are aligned perpendicular to the substrate surface (just before the transfer). When the latter governs the phenomenon, the domains are aligned along the concentric flow lines. We have studied the more complicated intermediate case by using two different molecular systems. It has been demonstrated that in LB films fabricated under such conditions, the orientation of the domains depends on the position on the substrate and the deposition type. Furthermore, monolayers deposited during the upward and downward strokes of the substrate become non-equivalent.     

Influence of molecular mass on the liquid crystal alignment of photosensitive fluorinated polyester films

Photosensitive fluorinated polyesters (polymer-n) of varying molecular mass M _n (number-average molecular mass) were synthesized. The thin films formed from polymer-n samples could induce liquid crystal (LC) alignment after irradiation by linearly polarized ultraviolet light. The LC alignment direction on the irradiated films was investigated in detail by linearly polarized infrared spectroscopy and polarizing optical microscopy. It was found that LC alignment behaviour changed with change in the molecular mass of polymer-n: irradiated films with lower or higher M _n induced homeotropic or homogenous alignment, respectively. There was no clear morphological anisotropy in these aligned films, as observed by atomic force microscopy. The surface energies of the irradiated films were also measured using the indirect contact angle method, where both surface energy and its polar component increased with increasing M _n. The variation in M _n could be considered as a main reason for varying alignment behaviour.     

Phase-transitions in Langmuir-Blodgett and cast films of a ferroelectric liquid crystal.

Langmuir-Blodgett films and cast films of a ferroelectric liquid crystal of sec-butyl-6-(4-(nonyloxy)benzoyloxy)-2-naphthoate have been fabricated. Their thermal behavior was investigated using infrared spectroscopy at elevated temperature combined with principal component analysis. The result shows a new phase transition from smectic A to nematic phase, compared to the phase sequence obtained by polarizing optical microscopy. Another solid transition of different isomeric crystals was also found, which was confirmed by calorimetric measurement.     

Langmuir-Blodgett films as aligning layers for homeotropic alignment of liquid crystal molecules

The first single crystal structure of a Group VA halide salt with three equivalent long n-alkyl chains, benzyltrioctadecylammonium bromide (BzN18Br), is reported. It consists of alternating interdigitated and non-interdigitated regions of alkyl chains separated by ionic planes. Two chains per molecule are paired and extend to one side in a non-interdigitated region. The third chain is on the opposite side of the ionic plane and pairs intermolecularly to form an adjacent, interdigitated region. The thickness of two nearly extended molecules defines the bilayer unit-two ionic planes flanked by a region with intramolecularly paired chains and separated by an interdigitated chain region. Powder X-ray diffraction and optical microscopy data of liquid crystalline BzN18Br are consistent with an enantiotropic smectic A₂ (SmA₂) phase: the three n-alkyl chains of each molecule are projected from one side of an ionic plane, and head groups of neighbouring molecules are oriented head-to-head, in a non-interdigitated bilayer assembly. The structure of BzN18Br fills an important gap in our knowledge about the crystal packing of ammonium and phosphonium salts with one-four equivalent long n-alkyl chains. A comparison of their packing arrangements is made and the transitional nature of the BzN18Br structures is demonstrated. Although salts with one, two, or three long n-alkyl chains form SmA₂ phases, each is distinctive in its molecular packing. A large molecular reorganization accompanies the crystal-to-liquid crystal transition of BzN18Br.     

Liquid crystal orientation in elliptic droplets in nematic emulsions

Elliptic droplets of nematic liquid crystal dispersed in a fluid organic monomer were obtained by phase separation from an isotropic mixture consisting of an organic monomer and a nematic liquid crystal contained in a poly(ethylene terephthalate) cell with inner surfaces treated with rubbed polyimide. The elliptic shape is a consequence of the constraint upon droplet growth along the direction perpendicular to the cell surfaces owing to the small thickness. Then, the resulting droplets will have a contact area with the inner surfaces of the cell treated with polyimide, which will impart a planar orientation on the liquid crystal in the droplet. By means of an optical microscope, using a simple pin hole of 5 μm, we have selected single droplets for a series of samples having different contact areas. By polarized infrared spectroscopy we have also studied the liquid crystal orientation in selected areas of the droplets. We then report the dependence of the order parameter of the liquid crystal on different contact areas with the alignment surface of the cell. The good degree of planar alignment of the liquid crystal in the elliptic droplets allows the use of such a technique for realizing electro-optical films operating in the reverse mode. We report the electro-optical transmission of reverse mode films with different sizes of elliptic droplet.