Determination of trace amounts of gold and silver in high-purity iron and steel by electrothermal atomic absorption spectrometry after reductive coprecipitation

Trace amounts of gold and silver in high-purity iron or steel were preconcentrated by reductive coprecipitation with palladium using ascorbic acid, and determined by electrothermal atomic absorption spectrometry (ET-AAS). Both gold and silver could be simultaneously separated and sensitively determined in 10 metals (aluminum, cobalt, chromium, copper, iron, manganese, molybdenum, nickel, vanadium and zinc). Comparable values were obtained for gold and silver in reference materials (low alloy steel) by the proposed method and a non-separation method; good agreement was found between the analytical values by both methods and the certified values. The proposed method is easy, simple and not dependent on sample composition and content. Moreover, gold and silver in metal samples could be simultaneously separated together with selenium and tellurium. The detection limits for gold and silver (3 σ) are 0.003 μg g^–1 and 0.002 μg g^–1, respectively. Received: 3 February 2000 / Revised: 11 April 2000 / Accepted: 16 April 2000     

Determination of trace amounts of gold in acid-attacked environmental samples by atomic absorption spectrometry with electrothermal atomization after preconcentration

A method for determination of trace amounts of gold in environmental samples (rocks, soils, sediments, and waters) by atomic absorption spectrometry with electrothermal atomization (ETAAS) after preconcentration using a chelating sorbent Spheron Thiol 1000 is described. The method accurately determines gold between 0.001 and several tens of grams per ton in samples having complex variations in mineralogy. Pulverized samples are roasted at 650°C to oxidize any sulfide and/or carbonaceous material. Samples are then subjected to a series of acid treatments to eliminate any silica matrix and to dissolve the sample. The Spheron Thiol 1000 is added to the sample solution, and then with sorbed gold is filtered out, washed, and ignited at 550°C. The residue is dissolved in aqua regia, evaporated, dissolved in distilled water, transferred to a volumetric flask, and analyzed by ETAAS.The limits of detection of gold, based on the 3 definition, were 0.5 ng g^–1 for 10-g samples (rocks, sediments, soils) and 0.05 ng mL^–1 for 1-L water samples. Precision of determination expressed by the relative standard deviation varied from 2.9% to 16.4%. The accuracy of the method is verified by analysis of certified reference materials. The obtained analytical results are in good agreement with attested values. The developed method was applied for gold determination in environmental samples affected by the acidification (acid mine drainage which is mainly a product of pyrite oxidation) from an open quartzite mine in the obov region situated NE of the city of Banská tiavnica (Slovakia).     

电沉积-钨丝电热原子吸收光谱法测定地质样品中痕量金

以市售幻灯投仪卤钨灯泡钨丝为原子化器的钨丝电热原子吸收光谱分析仪(TC-AAS),功率小、仪器成本低[1,2],如用微型CCD光谱仪作检测系统,可以实现原子吸收光谱仪的小型化,甚至可用于野外现场分析[3,4].     

Determination of trace amounts of some metals in samples with high salt content by atomic absorption spectrometry after cobalt-diethyldithiocarbamate coprecipitation

A method for determination of trace amounts of Cu, Fe, Pb, Mn, Zn, Cd, Ni, Bi and Cr in aqueous solutions by flame atomic absorption spectrometry after coprecipitation by using a combination of sodium diethyldithiocarbamate as a chelating agent and cobalt as a carrier element was introduced. Different factors including amounts of reagents, pH of sample solution, standing time, sample volume for the precipitation and matrix effects were examined. Under selected conditions, the relative standard deviation of the combined method of sample treatment, coprecipitation and determination with flame AAS (n = 9) is generally about 3.5-6.9%; the limits of detection (3 s, n = 20) for the analytes were found to be between 4 and 64 microg 1(-1). The procedure was applied to the analysis of sea water and dialysis concentrate samples with quantitative recovery, > or =95%.     

Determination of nanogram amounts of cadmium in water by electrothermal atomic absorption spectrometry after flotation separation

A method is described for the flotation an determination of ng-levels of cadmium in water. Cadmium in a 1-l sample of water is coprecipitated with hydrated zirconium oxide at pH 9.1 ± 0.1. The precipitate is floated with the aid of a surfactant solution and small air bubbles, separated and dissolved in dilute hydrochloric acid. The cadmium content is determined by electrothermal atomic absorption spectrophotometry. The method is applied to the determination of ng l^?1 levels of cadmium in fresh water. The time required for preconcentration of cadmium from a 1-l sample is 20 min per sample, after 20 min stirring.     

Determination of As,Sb and Bi in high-purity copper by electrothermal atomic absorption spectrometry

As, Sb and Bi were determined in copper electric cables by atomic absorption spectrometry with electrothermal atomization in a graphite furnace. The interferences in the determination of As, Sb and Bi caused by eleven cationic species and six types of acid were studied. The different volatilization of the copper matrix in comparison to the analyte was studied, as a means of increasing the analyte signal/non-specific absorption signal ratio.     

Determination of submicrogram amounts of tin by atomic absorption spectrometry with electrothermal atomization

The determination of tin is described with particular reference to the addition of organic compounds to the graphite tube for the suppression of interferences of other ions. Most were suppressed by adding 20 μl of 10% ascorbic acid to 20 μl of sample in the furnace. The method was used for the determination of tin in waste-waters and sediments.     

Slurry sampling electrothermal atomic absorption spectrometry for trace element analysis of high-purity tungsten trioxide

A slurry sampling ETAAS method for the determination of trace concentrations of Ca, Co, Cr, Cu, Fe, K, Mg, Na and Ni in tungsten trioxide is presented. A high background absorption appearing with large sample amounts during atomization at high temperatures was the only matrix interference observed. It could be significantly reduced by volatilization of the matrix in the pyrolysis step. Calibration curves recorded with aqueous standards could be used for calibration in all cases excluding the determination of very low analyte concentrations of Co and Fe which required the use of the standard additions method. The results obtained by this method showed an excellent agreement with those determined in digests by ETAAS. The detection limits achievable by the slurry technique were between 1 (Ca, K, Mg, Na) and 210 (Cu) ng/g. They were mostly by more than one order of magnitude better than those of the solution techniques.     

Preconcentration of trace heavy metals in water by coprecipitation with magnesium oxinate for electrothermal atomic absorption spectrometry

Nanogram quantities of heavy metals in 200 ml of water were quantitatively preconcentrated by coprecipitation with magnesium oxinate at pH 9–9.5. The precipitate was collected on a 1-m Nuclepore membrane filter and then dissolved in 5 ml of 1 mol/l nitric acid. After diluting to 10 ml with water, a 10- or 20-l aliquot of the solution was directly analyzed by electrothermal atomic absorption spectrometry using deuterium background correction. The background absorption due to the collector magnesium oxinate was negligibly small. The optimized coprecipitation technique has been applied to the determination of cobalt, nickel, copper, cadmium and lead at the ppt level in river and seawater. The relative standard deviations were within 10% and the detection limits were 0.025 (for Co), 0.019 (for Ni), 0.006 (for Cu), 0.001 (for Cd) and 0.017 g/l (for Pb). Blanks through the whole procedure were not detectable.     

Slurry sampling electrothermal atomic absorption spectrometry for trace element analysis of high-purity tungsten trioxide

A slurry sampling ETAAS method for the determination of trace concentrations of Ca, Co, Cr, Cu, Fe, K, Mg, Na and Ni in tungsten trioxide is presented. A high background absorption appearing with large sample amounts during atomization at high temperatures was the only matrix interference observed. It could be significantly reduced by volatilization of the matrix in the pyrolysis step. Calibration curves recorded with aqueous standards could be used for calibration in all cases excluding the determination of very low analyte concentrations of Co and Fe which required the use of the standard additions method. The results obtained by this method showed an excellent agreement with those determined in digests by ETAAS. The detection limits achievable by the slurry technique were between 1 (Ca, K, Mg, Na) and 210 (Cu) ng/g. They were mostly by more than one order of magnitude better than those of the solution techniques. Received: 9 July 1997 / Revised: 6 October 1997 / Accepted: 10 October 1997     

Determination of trace amounts of antimony in geological materials by atomic absorption spectrometry

For the determination of traces of antimony in rocks and soils, dried samples are heated with ammonium iodide to volatilize antimony triiodide, which is then taken up with 10% hydrochloric acid and extracted into TOPO-MIBK. Analysis is completed by atomic absorption spectrometry. The range is 1.0–40 p.p.m. Sb, the relative standard deviation being about 10–4%. Up to 20% iron and 2000 p.p.m. Cu, Pb, Zn. Sn, As or Hg do not interfere.     

Determination of iron in seawater by electrothermal atomic absorption spectrometry and atomic fluorescence spectrometry: A comparative study

Two methods available for direct determination of total Fe in seawater at low concentration level have been examined: electrothermal atomization atomic absorption spectrometry (ETAAS) and electrothermal atomization laser excited atomic fluorescence spectrometry (ETA-LEAFS). In a first part, we have optimized experimental conditions of ETAAS (electrothermal program, matrix chemical modification) for the determination of Fe in seawater by minimizing the chemical interference effects and the magnitude of the simultaneous background absorption signal. By using the best experimental conditions, a detection limit of 80 ng L⁻¹ (20 μL, 3σ) for total Fe concentration was obtained by ETAAS. Using similar experimental conditions (electrothermal program, chemical modification), we have optimized experimental conditions for the determination of Fe by LEAFS. The selected experimental conditions for ETA-LEAFS: excitation wavelength (296.69 nm), noise attenuation and adequate background correction led to a detection limit (3σ) of 3 ng L⁻¹ (i.e. 54 pM) for total Fe concentration with the use a 20 μL seawater sample. For the two methods, concentration values obtained for the analysis of Fe in a NASS-5 (0.2 μg L⁻¹) seawater sample were in good agreement with the certified values.     

Determination of trace amounts of molybdenum in water samples by inductively coupled plasma atomic emission spectrometry after cobalt-dithiocarbamate coprecipitation

Summary A method for the determination of trace amounts of molybdenum in fresh water and seawater samples by sequential ICP-AES with microsampling technique after cobalt-dithiocarbamate coprecipitation was developed. The precipitate was dissolved in 100 l of diluted nitric acid (1:2), and the solution obtained was then introduced into an ICP via a concentric nebulizer. By use of 1.7 ml sample, a preconcentration factor of 17 was achieved. Different factors including integration time, sample volume, pumping rate as well as coprecipitation conditions such as pH of the solution, amounts of reagents, standing time for the precipitate and matrix effects were examined and optimized in detail. Under selected conditions the detection limit of the method for Mo is 0.52 g/l using 1.7 ml sample. The procedure was applied to the analysis of water samples (artificial water and open ocean seawater reference material) with quantitative recovery. The analytical results were in good agreement with the certified value. The method is sensitive, simple, accurate and effective, also in the presence of interfering salts and can be applied to small sample volumes.On leave from the Department of Chemistry, Wuhan University, Wuhan, 430072 China     

Determination of trace impurities in titanium dioxide by slurry sampling electrothermal atomic absorption spectrometry

A slurry sampling electrothermal atomic absorption spectrometry method for the determination of Al, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Ni, Pb, Sr, Tl and Zn in powdered titanium dioxide is described. The behaviour of the titanium matrix in the atomizer and its interferences with the determination of Al, Fe, Co, Ni and Mn were studied. A tungsten carbide modified graphite tube was used to improve the signal shape and the repeatability for the determination of Fe. For all elements, except for Cd and Pb, quantification by a calibration curve established with aqueous standards was possible. No chemical modifier was used throughout in order to minimize contamination. For the contamination risk elements such as Ca, Fe, K, Mg, Na and Zn, the slurry sampling technique allows to achieve limits of detection (3σ of the blank) 5–20 times lower than the solution technique, resulting for these elements in values of 1, 3, 0.5, 0.5, 0.9 and 2 ng g⁻¹, respectively, and, generally being in the range of 0.2 ng g⁻¹ (Cd) to 10 ng g⁻¹ (Al and Tl). The results obtained by the slurry sampling technique are compared with those of other independent methods including four solution methods and neutron activation analysis.     

Electrothermal atomic absorption spectrometric determination of trace elements in high-purity silver after total and partial reductive separation of the matrix

A sensitive and reliable ETAAS determination of metal traces in high purity silver after total (Bi, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb) and partial (As, Hg, Sb, Se) separation of the matrix with ascorbic acid is described. The temperature program is optimized for analyte determination in ascorbic acid media and in 1% silver solution.     

Determination of nanogram amounts of bismuth in rocks by atomic absorption spectrometry with electrothermal atomization

Bismuth concentrations as low as 10 ng g^-1 in 100-mg samples of geological materials can be determined by atomic absorption spectrometry with electrothermal atomization. After HF—HClO₄ decomposition of the sample, bismuth is extracted as the iodide into methyl isobutyl ketone and is then stripped with ethylenediaminetetraacetic acid into the aqueous phase. Aliquots of this solution are pipetted into the graphite furnace and dried, charred, and atomized in an automated sequence. Atomic absorbance at the Bi 223.1-nm line provides a measure of the amount of bismuth present. Results are presented for 14 U.S. Geological Survey standard rocks.     

Determination of ultra trace amounts of bismuth in biological and water samples by electrothermal atomic absorption spectrometry (ET-AAS) after cloud point extraction

A new approach for a cloud point extraction electrothermal atomic absorption spectrometric method was used for determining bismuth. The aqueous analyte was acidified with sulfuric acid (pH 3.0-3.5). Triton X-114 was added as a surfactant and dithizone was used as a complexing agent.After phase separation at 50 °C based on the cloud point separation of the mixture, the surfactant-rich phase was diluted using tetrahydrofuran (THF). Twenty microliters of the enriched solution and 10 μl of 0.1% (w/v) Pd(NO₃)₂ as chemical modifier were dispersed into the graphite tube and the analyte determined by electrothermal atomic absorption spectrometry. After optimizing extraction conditions and instrumental parameters, a preconcentration factor of 196 was obtained for a sample of only 10 ml. The detection limit was 0.02 ng ml⁻¹ and the analytical curve was linear for the concentration range of 0.04-0.60 ng ml⁻¹. Relative standard deviations were <5%.The method was successfully applied for the extraction and determination of bismuth in tap water and biological samples (urine and hair).     

Electrothermal atomic absorption spectrometric determination of trace elements in high-purity silver after total and partial reductive separation of the matrix

A sensitive and reliable ETAAS determination of metal traces in high purity silver after total (Bi, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb) and partial (As, Hg, Sb, Se) separation of the matrix with ascorbic acid is described. The temperature program is optimized for analyte determination in ascorbic acid media and in 1% silver solution.     

Determination of antimony in steel by hydride generation and by electrothermal zeeman atomic absorption spectrometry

Procedures are described for the determination of antimony in steel. Samples by decomposed with a nitric/perchloric acid mixture and antimony is determined either by a.a.s. after hydride generation with sodium tetrahydroborate or by graphite-furnace a.a.s. with Zeeman background correction. Some reference steel samples were analyzed by both methods and by instrumental neutron activation. The results obtained (45–680 μg g^?1 antimony) were in very good agreement; detection limits were about 3 μg g^?1. The relative standard deviation for samples with > 50 μg g^?1 antimony was 〈 5%.     

Determination of cadmium in river water by electrothermal atomic absorption spectrometry after internal standardization-assisted rapid coprecipitation with lanthanum phosphate.

Cadmium ranging from 1 - 8 ng could be coprecipitated quantitatively with lanthanum phosphate at pH 5 - 6 from up to 200 mL of river water samples spiked with 5 microg of indium as an internal standard. Cadmium and indium coprecipitated were measured by using electrothermal atomic absorption spectrometry. The cadmium content in the original sample solution could be determined by internal standardization with indium. Since complete collection of the precipitate and strict adjustment of the volume of the final solution after coprecipitation are not required in this method, the precipitate could be collected by using decantation and centrifugation, and then dissolved with 1 mL of about 2.4 mol L(-1) nitric acid. The proposed method is simple and rapid, and enrichment close to 200-times can be attained; the detection limit (3sigma, n = 6) was 0.63 ng L(-1) in 200 mL of the sample solution.