Ligand versus metal protonation of an iron hydrogenase active site mimic

The protonation behavior of the iron hydrogenase active-site mimic [Fe2(mu-adt)(CO)4(PMe3)2] (1; adt=N-benzyl-azadithiolate) has been investigated by spectroscopic, electrochemical, and computational methods. The combination of an adt bridge and electron-donating phosphine ligands allows protonation of either the adt nitrogen to give [Fe2(mu-Hadt)(CO)4(PMe3)2]+ ([1 H]+), the Fe-Fe bond to give [Fe2(mu-adt)(mu-H)(CO)4(PMe3)2]+ ([1 Hy]+), or both sites simultaneously to give [Fe2(mu-Hadt)(mu-H)(CO)4(PMe3)2]2+ ([1 HHy]2 +). Complex 1 and its protonation products have been characterized in acetonitrile solution by IR, (1)H, and (31)P NMR spectroscopy. The solution structures of all protonation states feature a basal/basal orientation of the phosphine ligands, which contrasts with the basal/apical structure of 1 in the solid state. Density functional calculations have been performed on all protonation states and a comparison between calculated and experimental spectra confirms the structural assignments. The ligand protonated complex [1 H]+ (pKa=12) is the initial, metastable protonation product while the hydride [1 Hy]+ (pKa=15) is the thermodynamically stable singly protonated form. Tautomerization of cation [1 H]+ to [1 Hy]+ does not occur spontaneously. However, it can be catalyzed by HCl (k=2.2 m(-1) s(-1)), which results in the selective formation of cation [1 Hy]+. The protonations of the two basic sites have strong mutual effects on their basicities such that the hydride (pK(a)=8) and the ammonium proton (pK(a)=5) of the doubly protonated cationic complex [1 HHy]2+ are considerably more acidic than in the singly protonated analogues. The formation of dication [1 HHy]2+ from cation [1 H]+ is exceptionally slow with perchloric or trifluoromethanesulfonic acid (k=0.15 m(-1) s(-1)), while the dication is formed substantially faster (k>10(2) m(-1) s(-1)) with hydrobromic acid. Electrochemically, 1 undergoes irreversible reduction at -2.2 V versus ferrocene, and this potential shifts to -1.6, -1.1, and -1.0 V for the cationic complexes [1 H]+, [1 Hy]+, and [1 HHy]2+, respectively, upon protonation. The doubly protonated form [1 HHy]2+ is reduced at less negative potential than all previously reported hydrogenase models, although catalytic proton reduction at this potential is characterized by slow turnover.     

The Equatorial Ligand Effect on the Properties and Reactivity of Iron(V) Oxo Intermediates

High-valent metal oxo oxidants are common catalytic-cycle intermediates in enzymes and known to be highly reactive. To understand which features of these oxidants affect their reactivity, a series of biomimetic iron(V) oxo oxidants with peripherally substituted biuret-modified tetraamido macrocyclic ligands were synthesized and characterized. Major shifts in the UV/Vis absorption as a result of replacing a group in the equatorial plane of the iron(V) oxo species were found. Further characterization by EPR spectroscopy, ESI-MS, and resonance Raman spectroscopy revealed differences in structure and the electronic configuration of these complexes. A systematic reactivity study with a range of substrates was performed and showed that the reactions are affected by electron-withdrawing substituents in the equatorial ligand, which enhance the reaction rate by almost 10¹⁶ orders of magnitude. Thus, the long-range electrostatic perturbations have a major influence on the rate constant. Finally, computational studies identified the various electronic contributions to the rate-determining reaction step and explained how the equatorial ligand periphery affects the properties of the oxidant.     

Differences and Comparisons of the Properties and Reactivities of Iron(III)–hydroperoxo Complexes with Saturated Coordination Sphere

Heme and nonheme monoxygenases and dioxygenases catalyze important oxygen atom transfer reactions to substrates in the body. It is now well established that the cytochrome P450 enzymes react through the formation of a high‐valent iron(IV)–oxo heme cation radical. Its precursor in the catalytic cycle, the iron(III)–hydroperoxo complex, was tested for catalytic activity and found to be a sluggish oxidant of hydroxylation, epoxidation and sulfoxidation reactions. In a recent twist of events, evidence has emerged of several nonheme iron(III)–hydroperoxo complexes that appear to react with substrates via oxygen atom transfer processes. Although it was not clear from these studies whether the iron(III)–hydroperoxo reacted directly with substrates or that an initial O?O bond cleavage preceded the reaction. Clearly, the catalytic activity of heme and nonheme iron(III)–hydroperoxo complexes is substantially different, but the origins of this are still poorly understood and warrant a detailed analysis. In this work, an extensive computational analysis of aromatic hydroxylation by biomimetic nonheme and heme iron systems is presented, starting from an iron(III)–hydroperoxo complex with pentadentate ligand system (L₅²). Direct C?O bond formation by an iron(III)–hydroperoxo complex is investigated, as well as the initial heterolytic and homolytic bond cleavage of the hydroperoxo group. The calculations show that [(L₅²)Fe^III(OOH)]²⁺ should be able to initiate an aromatic hydroxylation process, although a low‐energy homolytic cleavage pathway is only slightly higher in energy. A detailed valence bond and thermochemical analysis rationalizes the differences in chemical reactivity of heme and nonheme iron(III)–hydroperoxo and show that the main reason for this particular nonheme complex to be reactive comes from the fact that they homolytically split the O?O bond, whereas a heterolytic O?O bond breaking in heme iron(III)–hydroperoxo is found.     

Ethylene biosynthesis by 1-aminocyclopropane-1-carboxylic acid oxidase: a DFT study

The reaction catalyzed by the plant enzyme 1-aminocyclopropane-1-carboxylic acid oxidase (ACCO) was investigated by using hybrid density functional theory. ACCO belongs to the non-heme iron(II) enzyme superfamily and carries out the bicarbonate-dependent two-electron oxidation of its substrate ACC (1-aminocyclopropane-1-carboxylic acid) concomitant with the reduction of dioxygen and oxidation of a reducing agent probably ascorbate. The reaction gives ethylene, CO(2), cyanide and two water molecules. A model including the mononuclear iron complex with ACC in the first coordination sphere was used to study the details of O-O bond cleavage and cyclopropane ring opening. Calculations imply that this unusual and complex reaction is triggered by a hydrogen atom abstraction step generating a radical on the amino nitrogen of ACC. Subsequently, cyclopropane ring opening followed by O-O bond heterolysis leads to a very reactive iron(IV)-oxo intermediate, which decomposes to ethylene and cyanoformate with very low energy barriers. The reaction is assisted by bicarbonate located in the second coordination sphere of the metal.     

A Phosphorus Analogue of Bis(η4‐cyclobutadiene)iron(0)

P makes it possible : The convenient oxidative synthesis of the 16‐electron organophosphorus iron sandwich complex [Fe(η⁴‐P₂C₂tBu₂)₂] (see structure) suggests that the elusive all‐carbon complex [Fe(η⁴‐C₄H₄)₂] is a viable synthetic target.

     

Cover Picture: A Phosphorus Analogue of Bis(η4‐cyclobutadiene)iron(0) (Angew. Chem. Int. Ed. 17/2009)

A rare phosphorus analogue of the elusive complex bis(η⁴‐cyclobutadiene)iron(0) is reported by K. Lammertsma et al. in their Communication on page 3104 ff. The background of the cover picture shows John Montagu (1718–1792), 4th Earl of Sandwich and 1st Lord of the Admiralty, who certainly would not have dreamt that an important class of organometallic compounds, sandwich complexes, would bear his name one day. The synthesis of [Fe(P₂C₂tBu₂)₂] shows that sandwich complexes are still topical objects of research.

     

A Unified Treatment of the Relationship Between Ligand Substituents and Spin State in a Family of Iron(II) Complexes

The influence of ligands on the spin state of a metal ion is of central importance for bioinorganic chemistry, and the production of base‐metal catalysts for synthesis applications. Complexes derived from [Fe(bpp)₂]²⁺ (bpp=2,6‐di{pyrazol‐1‐yl}pyridine) can be high‐spin, low‐spin, or spin‐crossover (SCO) active depending on the ligand substituents. Plots of the SCO midpoint temperature (T ) in solution vs. the relevant Hammett parameter show that the low‐spin state of the complex is stabilized by electron‐withdrawing pyridyl (“X”) substituents, but also by electron‐donating pyrazolyl (“Y”) substituents. Moreover, when a subset of complexes with halogeno X or Y substituents is considered, the two sets of compounds instead show identical trends of a small reduction in T for increasing substituent electronegativity. DFT calculations reproduce these disparate trends, which arise from competing influences of pyridyl and pyrazolyl ligand substituents on Fe‐L σ and π bonding.     

Reaction mechanism of apocarotenoid oxygenase (ACO): a DFT study

The mechanism of the oxidative cleavage catalyzed by apocarotenoid oxygenase (ACO) was studied by using a quantum chemical (DFT: B3 LYP) method. Based on the available crystal structure, relatively large models of the unusual active-site region, in which a ferrous ion is coordinated by four histidines and no negatively charged ligand, were selected and used in the computational investigation of the reaction mechanism. The results suggest that binding of dioxygen to the ferrous ion in the active site promotes one-electron oxidation of carotenoid leading to a substrate radical cation and a Fe-bound superoxide radical. Recombination of the two radicals, which can be realized in at least two different ways, yields a reactive peroxo species that subsequently evolves into either a dioxetane or an epoxide intermediate. The former easily decays into the final aldehyde products, whereas the oxidation of the epoxide to the proper products of the reaction requires involvement of a water molecule. The calculated activation barriers favor the dioxetane mechanism, yet the mechanism involving the epoxide intermediate cannot be ruled out.